Dear Prafulla Wadaskar,
-----Original Message----- From: Marek Vasut [mailto:marex@denx.de] Sent: 31 May 2012 16:37 To: u-boot@lists.denx.de Cc: Marek Vasut; Prafulla Wadaskar; Wolfgang Denk Subject: [PATCH] Kirkwood: Add support for Ka-Ro TK71
Signed-off-by: Marek Vasut marex@denx.de Cc: Prafulla Wadaskar prafulla@marvell.com Cc: Wolfgang Denk wd@denx.de
board/karo/tk71/Makefile | 45 ++++++++++ board/karo/tk71/kwbimage-256.cfg | 174
++++++++++++++++++++++++++++++++++++++
board/karo/tk71/kwbimage-512.cfg | 174
++++++++++++++++++++++++++++++++++++++
Dear Marek Just for DRAM size change do not add one more cfg file, configure by default 256MB of RAM in default kwbimg.cfg file and in function board_early_init_f() tune it to 512 for your other board version.
There's only one single bit flipped between those two kwb configs. Do you think it'd work if we just configured the system for 512MB RAM and ran get_ram_size() to see if it has only 256MB? That'd eliminate two board entries for this tk71.
Regards.. Prafulla . . .
Best regards, Marek Vasut