Pinmux configuration on ARM64 platforms must be performed during startup in pinctrl driver using info from device tree. exynos_pinmux_config() and pinmux_decode_periph_id() are only available on ARM32 platforms, so don't call those functions on ARM64 platforms. Instead of the latter function, use "non-removable" property from device tree to derive the dev_index value.
This fixes next linking errors on ARM64 platforms:
ld: drivers/mmc/exynos_dw_mmc.o: in function `exynos_dwmci_get_config': undefined reference to `pinmux_decode_periph_id' ld: drivers/mmc/exynos_dw_mmc.o: in function `do_dwmci_init': undefined reference to `exynos_pinmux_config'
Fixes: a082a2dde061 ("EXYNOS5: DWMMC: Added FDT support for DWMMC") Signed-off-by: Sam Protsenko semen.protsenko@linaro.org --- drivers/mmc/exynos_dw_mmc.c | 9 +++++++++ 1 file changed, 9 insertions(+)
diff --git a/drivers/mmc/exynos_dw_mmc.c b/drivers/mmc/exynos_dw_mmc.c index 8e80bd6a059f..6d0872e0df50 100644 --- a/drivers/mmc/exynos_dw_mmc.c +++ b/drivers/mmc/exynos_dw_mmc.c @@ -145,6 +145,7 @@ static int exynos_dwmci_core_init(struct dwmci_host *host)
static int do_dwmci_init(struct dwmci_host *host) { +#if CONFIG_IS_ENABLED(CPU_V7A) int flag, err;
flag = host->buswidth == 8 ? PINMUX_FLAG_8BIT_MODE : PINMUX_FLAG_NONE; @@ -153,6 +154,7 @@ static int do_dwmci_init(struct dwmci_host *host) printf("DWMMC%d not configure\n", host->dev_index); return err; } +#endif
return exynos_dwmci_core_init(host); } @@ -164,6 +166,7 @@ static int exynos_dwmci_get_config(struct udevice *dev, const void *blob, int err = 0; u32 timing[3];
+#if CONFIG_IS_ENABLED(CPU_V7A) /* Extract device id for each mmc channel */ host->dev_id = pinmux_decode_periph_id(blob, node);
@@ -175,6 +178,12 @@ static int exynos_dwmci_get_config(struct udevice *dev, const void *blob, printf("DWMMC%d: Can't get the dev index\n", host->dev_index); return -EINVAL; } +#else + if (dev_read_bool(dev, "non-removable")) + host->dev_index = 0; /* eMMC */ + else + host->dev_index = 2; /* SD card */ +#endif
/* Get the bus width from the device node (Default is 4bit buswidth) */ host->buswidth = fdtdec_get_int(blob, node, "samsung,bus-width", 4);