Use arm-gic.h and irq.h for interrupt description. It helps to improve readability of device tree file.
Suggested-by: Laurent Pinchart laurent.pinchart@ideasonboard.com Signed-off-by: Michal Simek michal.simek@amd.com ---
arch/arm/dts/zynqmp.dtsi | 184 +++++++++++++++++++++++---------------- 1 file changed, 110 insertions(+), 74 deletions(-)
diff --git a/arch/arm/dts/zynqmp.dtsi b/arch/arm/dts/zynqmp.dtsi index 8d3501018455..951f3f795e97 100644 --- a/arch/arm/dts/zynqmp.dtsi +++ b/arch/arm/dts/zynqmp.dtsi @@ -14,6 +14,8 @@
#include <dt-bindings/dma/xlnx-zynqmp-dpdma.h> #include <dt-bindings/gpio/gpio.h> +#include <dt-bindings/interrupt-controller/arm-gic.h> +#include <dt-bindings/interrupt-controller/irq.h> #include <dt-bindings/power/xlnx-zynqmp-power.h> #include <dt-bindings/reset/xlnx-zynqmp-resets.h>
@@ -122,7 +124,7 @@ bootph-all; compatible = "xlnx,zynqmp-ipi-mailbox"; interrupt-parent = <&gic>; - interrupts = <0 35 4>; + interrupts = <GIC_SPI 35 IRQ_TYPE_LEVEL_HIGH>; xlnx,ipi-id = <0>; #address-cells = <2>; #size-cells = <2>; @@ -152,10 +154,10 @@ pmu { compatible = "arm,armv8-pmuv3"; interrupt-parent = <&gic>; - interrupts = <0 143 4>, - <0 144 4>, - <0 145 4>, - <0 146 4>; + interrupts = <GIC_SPI 143 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 144 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 145 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 146 IRQ_TYPE_LEVEL_HIGH>; interrupt-affinity = <&cpu0>, <&cpu1>, <&cpu2>, @@ -183,7 +185,7 @@ bootph-all; compatible = "xlnx,zynqmp-power"; interrupt-parent = <&gic>; - interrupts = <0 35 4>; + interrupts = <GIC_SPI 35 IRQ_TYPE_LEVEL_HIGH>; mboxes = <&ipi_mailbox_pmu1 0>, <&ipi_mailbox_pmu1 1>; mbox-names = "tx", "rx"; }; @@ -227,10 +229,10 @@ timer { compatible = "arm,armv8-timer"; interrupt-parent = <&gic>; - interrupts = <1 13 0xf08>, - <1 14 0xf08>, - <1 11 0xf08>, - <1 10 0xf08>; + interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>, + <GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>, + <GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>, + <GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>; };
edac { @@ -258,7 +260,7 @@ status = "disabled"; clock-names = "can_clk", "pclk"; reg = <0x0 0xff060000 0x0 0x1000>; - interrupts = <0 23 4>; + interrupts = <GIC_SPI 23 IRQ_TYPE_LEVEL_HIGH>; interrupt-parent = <&gic>; tx-fifo-depth = <0x40>; rx-fifo-depth = <0x40>; @@ -271,7 +273,7 @@ status = "disabled"; clock-names = "can_clk", "pclk"; reg = <0x0 0xff070000 0x0 0x1000>; - interrupts = <0 24 4>; + interrupts = <GIC_SPI 24 IRQ_TYPE_LEVEL_HIGH>; interrupt-parent = <&gic>; tx-fifo-depth = <0x40>; rx-fifo-depth = <0x40>; @@ -291,11 +293,11 @@ compatible = "arm,cci-400-pmu,r1"; reg = <0x9000 0x5000>; interrupt-parent = <&gic>; - interrupts = <0 123 4>, - <0 123 4>, - <0 123 4>, - <0 123 4>, - <0 123 4>; + interrupts = <GIC_SPI 123 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 123 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 123 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 123 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 123 IRQ_TYPE_LEVEL_HIGH>; }; };
@@ -305,7 +307,7 @@ compatible = "xlnx,zynqmp-dma-1.0"; reg = <0x0 0xfd500000 0x0 0x1000>; interrupt-parent = <&gic>; - interrupts = <0 124 4>; + interrupts = <GIC_SPI 124 IRQ_TYPE_LEVEL_HIGH>; clock-names = "clk_main", "clk_apb"; #dma-cells = <1>; xlnx,bus-width = <128>; @@ -318,7 +320,7 @@ compatible = "xlnx,zynqmp-dma-1.0"; reg = <0x0 0xfd510000 0x0 0x1000>; interrupt-parent = <&gic>; - interrupts = <0 125 4>; + interrupts = <GIC_SPI 125 IRQ_TYPE_LEVEL_HIGH>; clock-names = "clk_main", "clk_apb"; #dma-cells = <1>; xlnx,bus-width = <128>; @@ -331,7 +333,7 @@ compatible = "xlnx,zynqmp-dma-1.0"; reg = <0x0 0xfd520000 0x0 0x1000>; interrupt-parent = <&gic>; - interrupts = <0 126 4>; + interrupts = <GIC_SPI 126 IRQ_TYPE_LEVEL_HIGH>; clock-names = "clk_main", "clk_apb"; #dma-cells = <1>; xlnx,bus-width = <128>; @@ -344,7 +346,7 @@ compatible = "xlnx,zynqmp-dma-1.0"; reg = <0x0 0xfd530000 0x0 0x1000>; interrupt-parent = <&gic>; - interrupts = <0 127 4>; + interrupts = <GIC_SPI 127 IRQ_TYPE_LEVEL_HIGH>; clock-names = "clk_main", "clk_apb"; #dma-cells = <1>; xlnx,bus-width = <128>; @@ -357,7 +359,7 @@ compatible = "xlnx,zynqmp-dma-1.0"; reg = <0x0 0xfd540000 0x0 0x1000>; interrupt-parent = <&gic>; - interrupts = <0 128 4>; + interrupts = <GIC_SPI 128 IRQ_TYPE_LEVEL_HIGH>; clock-names = "clk_main", "clk_apb"; #dma-cells = <1>; xlnx,bus-width = <128>; @@ -370,7 +372,7 @@ compatible = "xlnx,zynqmp-dma-1.0"; reg = <0x0 0xfd550000 0x0 0x1000>; interrupt-parent = <&gic>; - interrupts = <0 129 4>; + interrupts = <GIC_SPI 129 IRQ_TYPE_LEVEL_HIGH>; clock-names = "clk_main", "clk_apb"; #dma-cells = <1>; xlnx,bus-width = <128>; @@ -383,7 +385,7 @@ compatible = "xlnx,zynqmp-dma-1.0"; reg = <0x0 0xfd560000 0x0 0x1000>; interrupt-parent = <&gic>; - interrupts = <0 130 4>; + interrupts = <GIC_SPI 130 IRQ_TYPE_LEVEL_HIGH>; clock-names = "clk_main", "clk_apb"; #dma-cells = <1>; xlnx,bus-width = <128>; @@ -396,7 +398,7 @@ compatible = "xlnx,zynqmp-dma-1.0"; reg = <0x0 0xfd570000 0x0 0x1000>; interrupt-parent = <&gic>; - interrupts = <0 131 4>; + interrupts = <GIC_SPI 131 IRQ_TYPE_LEVEL_HIGH>; clock-names = "clk_main", "clk_apb"; #dma-cells = <1>; xlnx,bus-width = <128>; @@ -413,7 +415,7 @@ <0x0 0xf9060000 0x0 0x20000>; interrupt-controller; interrupt-parent = <&gic>; - interrupts = <1 9 0xf04>; + interrupts = <GIC_PPI 9 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_HIGH)>; };
gpu: gpu@fd4b0000 { @@ -421,7 +423,12 @@ compatible = "xlnx,zynqmp-mali", "arm,mali-400"; reg = <0x0 0xfd4b0000 0x0 0x10000>; interrupt-parent = <&gic>; - interrupts = <0 132 4>, <0 132 4>, <0 132 4>, <0 132 4>, <0 132 4>, <0 132 4>; + interrupts = <GIC_SPI 132 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 132 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 132 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 132 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 132 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 132 IRQ_TYPE_LEVEL_HIGH>; interrupt-names = "gp", "gpmmu", "pp0", "ppmmu0", "pp1", "ppmmu1"; clock-names = "bus", "core"; power-domains = <&zynqmp_firmware PD_GPU>; @@ -436,7 +443,7 @@ compatible = "xlnx,zynqmp-dma-1.0"; reg = <0x0 0xffa80000 0x0 0x1000>; interrupt-parent = <&gic>; - interrupts = <0 77 4>; + interrupts = <GIC_SPI 77 IRQ_TYPE_LEVEL_HIGH>; clock-names = "clk_main", "clk_apb"; #dma-cells = <1>; xlnx,bus-width = <64>; @@ -449,7 +456,7 @@ compatible = "xlnx,zynqmp-dma-1.0"; reg = <0x0 0xffa90000 0x0 0x1000>; interrupt-parent = <&gic>; - interrupts = <0 78 4>; + interrupts = <GIC_SPI 78 IRQ_TYPE_LEVEL_HIGH>; clock-names = "clk_main", "clk_apb"; #dma-cells = <1>; xlnx,bus-width = <64>; @@ -462,7 +469,7 @@ compatible = "xlnx,zynqmp-dma-1.0"; reg = <0x0 0xffaa0000 0x0 0x1000>; interrupt-parent = <&gic>; - interrupts = <0 79 4>; + interrupts = <GIC_SPI 79 IRQ_TYPE_LEVEL_HIGH>; clock-names = "clk_main", "clk_apb"; #dma-cells = <1>; xlnx,bus-width = <64>; @@ -475,7 +482,7 @@ compatible = "xlnx,zynqmp-dma-1.0"; reg = <0x0 0xffab0000 0x0 0x1000>; interrupt-parent = <&gic>; - interrupts = <0 80 4>; + interrupts = <GIC_SPI 80 IRQ_TYPE_LEVEL_HIGH>; clock-names = "clk_main", "clk_apb"; #dma-cells = <1>; xlnx,bus-width = <64>; @@ -488,7 +495,7 @@ compatible = "xlnx,zynqmp-dma-1.0"; reg = <0x0 0xffac0000 0x0 0x1000>; interrupt-parent = <&gic>; - interrupts = <0 81 4>; + interrupts = <GIC_SPI 81 IRQ_TYPE_LEVEL_HIGH>; clock-names = "clk_main", "clk_apb"; #dma-cells = <1>; xlnx,bus-width = <64>; @@ -501,7 +508,7 @@ compatible = "xlnx,zynqmp-dma-1.0"; reg = <0x0 0xffad0000 0x0 0x1000>; interrupt-parent = <&gic>; - interrupts = <0 82 4>; + interrupts = <GIC_SPI 82 IRQ_TYPE_LEVEL_HIGH>; clock-names = "clk_main", "clk_apb"; #dma-cells = <1>; xlnx,bus-width = <64>; @@ -514,7 +521,7 @@ compatible = "xlnx,zynqmp-dma-1.0"; reg = <0x0 0xffae0000 0x0 0x1000>; interrupt-parent = <&gic>; - interrupts = <0 83 4>; + interrupts = <GIC_SPI 83 IRQ_TYPE_LEVEL_HIGH>; clock-names = "clk_main", "clk_apb"; #dma-cells = <1>; xlnx,bus-width = <64>; @@ -527,7 +534,7 @@ compatible = "xlnx,zynqmp-dma-1.0"; reg = <0x0 0xffaf0000 0x0 0x1000>; interrupt-parent = <&gic>; - interrupts = <0 84 4>; + interrupts = <GIC_SPI 84 IRQ_TYPE_LEVEL_HIGH>; clock-names = "clk_main", "clk_apb"; #dma-cells = <1>; xlnx,bus-width = <64>; @@ -539,7 +546,7 @@ compatible = "xlnx,zynqmp-ddrc-2.40a"; reg = <0x0 0xfd070000 0x0 0x30000>; interrupt-parent = <&gic>; - interrupts = <0 112 4>; + interrupts = <GIC_SPI 112 IRQ_TYPE_LEVEL_HIGH>; };
nand0: nand-controller@ff100000 { @@ -548,7 +555,7 @@ reg = <0x0 0xff100000 0x0 0x1000>; clock-names = "controller", "bus"; interrupt-parent = <&gic>; - interrupts = <0 14 4>; + interrupts = <GIC_SPI 14 IRQ_TYPE_LEVEL_HIGH>; #address-cells = <1>; #size-cells = <0>; iommus = <&smmu 0x872>; @@ -559,7 +566,8 @@ compatible = "xlnx,zynqmp-gem", "cdns,gem"; status = "disabled"; interrupt-parent = <&gic>; - interrupts = <0 57 4>, <0 57 4>; + interrupts = <GIC_SPI 57 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 57 IRQ_TYPE_LEVEL_HIGH>; reg = <0x0 0xff0b0000 0x0 0x1000>; clock-names = "pclk", "hclk", "tx_clk", "rx_clk", "tsu_clk"; #address-cells = <1>; @@ -574,7 +582,8 @@ compatible = "xlnx,zynqmp-gem", "cdns,gem"; status = "disabled"; interrupt-parent = <&gic>; - interrupts = <0 59 4>, <0 59 4>; + interrupts = <GIC_SPI 59 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 59 IRQ_TYPE_LEVEL_HIGH>; reg = <0x0 0xff0c0000 0x0 0x1000>; clock-names = "pclk", "hclk", "tx_clk", "rx_clk", "tsu_clk"; #address-cells = <1>; @@ -589,7 +598,8 @@ compatible = "xlnx,zynqmp-gem", "cdns,gem"; status = "disabled"; interrupt-parent = <&gic>; - interrupts = <0 61 4>, <0 61 4>; + interrupts = <GIC_SPI 61 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 61 IRQ_TYPE_LEVEL_HIGH>; reg = <0x0 0xff0d0000 0x0 0x1000>; clock-names = "pclk", "hclk", "tx_clk", "rx_clk", "tsu_clk"; #address-cells = <1>; @@ -604,7 +614,8 @@ compatible = "xlnx,zynqmp-gem", "cdns,gem"; status = "disabled"; interrupt-parent = <&gic>; - interrupts = <0 63 4>, <0 63 4>; + interrupts = <GIC_SPI 63 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 63 IRQ_TYPE_LEVEL_HIGH>; reg = <0x0 0xff0e0000 0x0 0x1000>; clock-names = "pclk", "hclk", "tx_clk", "rx_clk", "tsu_clk"; #address-cells = <1>; @@ -621,7 +632,7 @@ #gpio-cells = <0x2>; gpio-controller; interrupt-parent = <&gic>; - interrupts = <0 16 4>; + interrupts = <GIC_SPI 16 IRQ_TYPE_LEVEL_HIGH>; interrupt-controller; #interrupt-cells = <2>; reg = <0x0 0xff0a0000 0x0 0x1000>; @@ -632,7 +643,7 @@ compatible = "cdns,i2c-r1p14"; status = "disabled"; interrupt-parent = <&gic>; - interrupts = <0 17 4>; + interrupts = <GIC_SPI 17 IRQ_TYPE_LEVEL_HIGH>; clock-frequency = <400000>; reg = <0x0 0xff020000 0x0 0x1000>; #address-cells = <1>; @@ -644,7 +655,7 @@ compatible = "cdns,i2c-r1p14"; status = "disabled"; interrupt-parent = <&gic>; - interrupts = <0 18 4>; + interrupts = <GIC_SPI 18 IRQ_TYPE_LEVEL_HIGH>; clock-frequency = <400000>; reg = <0x0 0xff030000 0x0 0x1000>; #address-cells = <1>; @@ -668,11 +679,11 @@ msi-controller; device_type = "pci"; interrupt-parent = <&gic>; - interrupts = <0 118 4>, - <0 117 4>, - <0 116 4>, - <0 115 4>, /* MSI_1 [63...32] */ - <0 114 4>; /* MSI_0 [31...0] */ + interrupts = <GIC_SPI 118 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 117 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 116 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 115 IRQ_TYPE_LEVEL_HIGH>, /* MSI_1 [63...32] */ + <GIC_SPI 114 IRQ_TYPE_LEVEL_HIGH>; /* MSI_0 [31...0] */ interrupt-names = "misc", "dummy", "intx", "msi1", "msi0"; msi-parent = <&pcie>; @@ -702,7 +713,7 @@ compatible = "xlnx,zynqmp-qspi-1.0"; status = "disabled"; clock-names = "ref_clk", "pclk"; - interrupts = <0 15 4>; + interrupts = <GIC_SPI 15 IRQ_TYPE_LEVEL_HIGH>; interrupt-parent = <&gic>; num-cs = <1>; reg = <0x0 0xff0f0000 0x0 0x1000>, @@ -727,7 +738,8 @@ status = "disabled"; reg = <0x0 0xffa60000 0x0 0x100>; interrupt-parent = <&gic>; - interrupts = <0 26 4>, <0 27 4>; + interrupts = <GIC_SPI 26 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 27 IRQ_TYPE_LEVEL_HIGH>; interrupt-names = "alarm", "sec"; calibration = <0x7FFF>; }; @@ -737,7 +749,7 @@ status = "disabled"; reg = <0x0 0xfd0c0000 0x0 0x2000>; interrupt-parent = <&gic>; - interrupts = <0 133 4>; + interrupts = <GIC_SPI 133 IRQ_TYPE_LEVEL_HIGH>; power-domains = <&zynqmp_firmware PD_SATA>; resets = <&zynqmp_reset ZYNQMP_RESET_SATA>; iommus = <&smmu 0x4c0>, <&smmu 0x4c1>, @@ -750,7 +762,7 @@ compatible = "xlnx,zynqmp-8.9a", "arasan,sdhci-8.9a"; status = "disabled"; interrupt-parent = <&gic>; - interrupts = <0 48 4>; + interrupts = <GIC_SPI 48 IRQ_TYPE_LEVEL_HIGH>; reg = <0x0 0xff160000 0x0 0x1000>; clock-names = "clk_xin", "clk_ahb"; iommus = <&smmu 0x870>; @@ -765,7 +777,7 @@ compatible = "xlnx,zynqmp-8.9a", "arasan,sdhci-8.9a"; status = "disabled"; interrupt-parent = <&gic>; - interrupts = <0 49 4>; + interrupts = <GIC_SPI 49 IRQ_TYPE_LEVEL_HIGH>; reg = <0x0 0xff170000 0x0 0x1000>; clock-names = "clk_xin", "clk_ahb"; iommus = <&smmu 0x871>; @@ -782,18 +794,30 @@ status = "disabled"; #global-interrupts = <1>; interrupt-parent = <&gic>; - interrupts = <0 155 4>, - <0 155 4>, <0 155 4>, <0 155 4>, <0 155 4>, - <0 155 4>, <0 155 4>, <0 155 4>, <0 155 4>, - <0 155 4>, <0 155 4>, <0 155 4>, <0 155 4>, - <0 155 4>, <0 155 4>, <0 155 4>, <0 155 4>; + interrupts = <GIC_SPI 155 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 155 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 155 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 155 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 155 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 155 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 155 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 155 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 155 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 155 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 155 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 155 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 155 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 155 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 155 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 155 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 155 IRQ_TYPE_LEVEL_HIGH>; };
spi0: spi@ff040000 { compatible = "cdns,spi-r1p6"; status = "disabled"; interrupt-parent = <&gic>; - interrupts = <0 19 4>; + interrupts = <GIC_SPI 19 IRQ_TYPE_LEVEL_HIGH>; reg = <0x0 0xff040000 0x0 0x1000>; clock-names = "ref_clk", "pclk"; #address-cells = <1>; @@ -805,7 +829,7 @@ compatible = "cdns,spi-r1p6"; status = "disabled"; interrupt-parent = <&gic>; - interrupts = <0 20 4>; + interrupts = <GIC_SPI 20 IRQ_TYPE_LEVEL_HIGH>; reg = <0x0 0xff050000 0x0 0x1000>; clock-names = "ref_clk", "pclk"; #address-cells = <1>; @@ -817,7 +841,9 @@ compatible = "cdns,ttc"; status = "disabled"; interrupt-parent = <&gic>; - interrupts = <0 36 4>, <0 37 4>, <0 38 4>; + interrupts = <GIC_SPI 36 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 37 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 38 IRQ_TYPE_LEVEL_HIGH>; reg = <0x0 0xff110000 0x0 0x1000>; timer-width = <32>; power-domains = <&zynqmp_firmware PD_TTC_0>; @@ -827,7 +853,9 @@ compatible = "cdns,ttc"; status = "disabled"; interrupt-parent = <&gic>; - interrupts = <0 39 4>, <0 40 4>, <0 41 4>; + interrupts = <GIC_SPI 39 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 40 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 41 IRQ_TYPE_LEVEL_HIGH>; reg = <0x0 0xff120000 0x0 0x1000>; timer-width = <32>; power-domains = <&zynqmp_firmware PD_TTC_1>; @@ -837,7 +865,9 @@ compatible = "cdns,ttc"; status = "disabled"; interrupt-parent = <&gic>; - interrupts = <0 42 4>, <0 43 4>, <0 44 4>; + interrupts = <GIC_SPI 42 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 43 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 44 IRQ_TYPE_LEVEL_HIGH>; reg = <0x0 0xff130000 0x0 0x1000>; timer-width = <32>; power-domains = <&zynqmp_firmware PD_TTC_2>; @@ -847,7 +877,9 @@ compatible = "cdns,ttc"; status = "disabled"; interrupt-parent = <&gic>; - interrupts = <0 45 4>, <0 46 4>, <0 47 4>; + interrupts = <GIC_SPI 45 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 46 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 47 IRQ_TYPE_LEVEL_HIGH>; reg = <0x0 0xff140000 0x0 0x1000>; timer-width = <32>; power-domains = <&zynqmp_firmware PD_TTC_3>; @@ -858,7 +890,7 @@ compatible = "xlnx,zynqmp-uart", "cdns,uart-r1p12"; status = "disabled"; interrupt-parent = <&gic>; - interrupts = <0 21 4>; + interrupts = <GIC_SPI 21 IRQ_TYPE_LEVEL_HIGH>; reg = <0x0 0xff000000 0x0 0x1000>; clock-names = "uart_clk", "pclk"; power-domains = <&zynqmp_firmware PD_UART_0>; @@ -869,7 +901,7 @@ compatible = "xlnx,zynqmp-uart", "cdns,uart-r1p12"; status = "disabled"; interrupt-parent = <&gic>; - interrupts = <0 22 4>; + interrupts = <GIC_SPI 22 IRQ_TYPE_LEVEL_HIGH>; reg = <0x0 0xff010000 0x0 0x1000>; clock-names = "uart_clk", "pclk"; power-domains = <&zynqmp_firmware PD_UART_1>; @@ -896,7 +928,9 @@ reg = <0x0 0xfe200000 0x0 0x40000>; interrupt-parent = <&gic>; interrupt-names = "dwc_usb3", "otg", "hiber"; - interrupts = <0 65 4>, <0 69 4>, <0 75 4>; + interrupts = <GIC_SPI 65 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 65 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 69 IRQ_TYPE_LEVEL_HIGH>; iommus = <&smmu 0x860>; snps,quirk-frame-length-adjustment = <0x20>; clock-names = "ref"; @@ -927,7 +961,9 @@ reg = <0x0 0xfe300000 0x0 0x40000>; interrupt-parent = <&gic>; interrupt-names = "dwc_usb3", "otg", "hiber"; - interrupts = <0 70 4>, <0 74 4>, <0 76 4>; + interrupts = <GIC_SPI 70 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 70 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 74 IRQ_TYPE_LEVEL_HIGH>; iommus = <&smmu 0x861>; snps,quirk-frame-length-adjustment = <0x20>; clock-names = "ref"; @@ -942,7 +978,7 @@ compatible = "cdns,wdt-r1p2"; status = "disabled"; interrupt-parent = <&gic>; - interrupts = <0 113 1>; + interrupts = <GIC_SPI 113 IRQ_TYPE_EDGE_RISING>; reg = <0x0 0xfd4d0000 0x0 0x1000>; timeout-sec = <60>; reset-on-timeout; @@ -952,7 +988,7 @@ compatible = "cdns,wdt-r1p2"; status = "disabled"; interrupt-parent = <&gic>; - interrupts = <0 52 1>; + interrupts = <GIC_SPI 52 IRQ_TYPE_EDGE_RISING>; reg = <0x0 0xff150000 0x0 0x1000>; timeout-sec = <10>; }; @@ -961,7 +997,7 @@ compatible = "xlnx,zynqmp-ams"; status = "disabled"; interrupt-parent = <&gic>; - interrupts = <0 56 4>; + interrupts = <GIC_SPI 56 IRQ_TYPE_LEVEL_HIGH>; reg = <0x0 0xffa50000 0x0 0x800>; #address-cells = <1>; #size-cells = <1>; @@ -987,7 +1023,7 @@ compatible = "xlnx,zynqmp-dpdma"; status = "disabled"; reg = <0x0 0xfd4c0000 0x0 0x1000>; - interrupts = <0 122 4>; + interrupts = <GIC_SPI 122 IRQ_TYPE_LEVEL_HIGH>; interrupt-parent = <&gic>; clock-names = "axi_clk"; power-domains = <&zynqmp_firmware PD_DP>; @@ -1003,7 +1039,7 @@ <0x0 0xfd4ab000 0x0 0x1000>, <0x0 0xfd4ac000 0x0 0x1000>; reg-names = "dp", "blend", "av_buf", "aud"; - interrupts = <0 119 4>; + interrupts = <GIC_SPI 119 IRQ_TYPE_LEVEL_HIGH>; interrupt-parent = <&gic>; clock-names = "dp_apb_clk", "dp_aud_clk", "dp_vtc_pixel_clk_in";