Hi, Shen Bo
On 3/22/2013 1:29 PM, Bo Shen wrote:
Hi Josh, minor comment as following.
On 3/21/2013 9:52, Josh Wu wrote:
Add support for following features:
- nand boot, with PMECC 2bit ECC for 512 bytes sector
- SPI flash boot
- SD card boot
- LCD support
Signed-off-by: Josh Wu josh.wu@atmel.com
MAINTAINERS | 3 + arch/arm/cpu/arm926ejs/at91/Makefile | 1 + arch/arm/cpu/arm926ejs/at91/at91sam9n12_devices.c | 180 ++++++++++++++++ arch/arm/cpu/arm926ejs/at91/clock.c | 4 +- board/atmel/at91sam9n12ek/Makefile | 52 +++++ board/atmel/at91sam9n12ek/at91sam9n12ek.c | 228 ++++++++++++++++++++ boards.cfg | 3 + include/configs/at91sam9n12ek.h | 232 +++++++++++++++++++++ 8 files changed, 701 insertions(+), 2 deletions(-) create mode 100644 arch/arm/cpu/arm926ejs/at91/at91sam9n12_devices.c create mode 100644 board/atmel/at91sam9n12ek/Makefile create mode 100644 board/atmel/at91sam9n12ek/at91sam9n12ek.c create mode 100644 include/configs/at91sam9n12ek.h
[snip]
+#ifdef CONFIG_LCD +void at91_lcd_hw_init(void) +{
- struct at91_pmc *pmc = (struct at91_pmc *)ATMEL_BASE_PMC;
- at91_set_a_periph(AT91_PIO_PORTC, 24, 0); /* LCDDPWR */
- at91_set_a_periph(AT91_PIO_PORTC, 26, 0); /* LCDVSYNC */
- at91_set_a_periph(AT91_PIO_PORTC, 27, 0); /* LCDHSYNC */
- at91_set_a_periph(AT91_PIO_PORTC, 28, 0); /* LCDDOTCK */
- at91_set_a_periph(AT91_PIO_PORTC, 29, 0); /* LCDDEN */
- at91_set_a_periph(AT91_PIO_PORTC, 30, 0); /* LCDDOTCK */
- at91_set_a_periph(AT91_PIO_PORTC, 0, 0); /* LCDD0 */
- at91_set_a_periph(AT91_PIO_PORTC, 1, 0); /* LCDD1 */
- at91_set_a_periph(AT91_PIO_PORTC, 2, 0); /* LCDD2 */
- at91_set_a_periph(AT91_PIO_PORTC, 3, 0); /* LCDD3 */
- at91_set_a_periph(AT91_PIO_PORTC, 4, 0); /* LCDD4 */
- at91_set_a_periph(AT91_PIO_PORTC, 5, 0); /* LCDD5 */
- at91_set_a_periph(AT91_PIO_PORTC, 6, 0); /* LCDD6 */
- at91_set_a_periph(AT91_PIO_PORTC, 7, 0); /* LCDD7 */
- at91_set_a_periph(AT91_PIO_PORTC, 8, 0); /* LCDD8 */
- at91_set_a_periph(AT91_PIO_PORTC, 9, 0); /* LCDD9 */
- at91_set_a_periph(AT91_PIO_PORTC, 10, 0); /* LCDD10 */
- at91_set_a_periph(AT91_PIO_PORTC, 11, 0); /* LCDD11 */
- at91_set_a_periph(AT91_PIO_PORTC, 12, 0); /* LCDD12 */
- at91_set_a_periph(AT91_PIO_PORTC, 13, 0); /* LCDD13 */
- at91_set_a_periph(AT91_PIO_PORTC, 14, 0); /* LCDD14 */
- at91_set_a_periph(AT91_PIO_PORTC, 15, 0); /* LCDD15 */
- at91_set_a_periph(AT91_PIO_PORTC, 16, 0); /* LCDD16 */
- at91_set_a_periph(AT91_PIO_PORTC, 17, 0); /* LCDD17 */
- at91_set_a_periph(AT91_PIO_PORTC, 18, 0); /* LCDD18 */
- at91_set_a_periph(AT91_PIO_PORTC, 19, 0); /* LCDD19 */
- at91_set_a_periph(AT91_PIO_PORTC, 20, 0); /* LCDD20 */
- at91_set_a_periph(AT91_PIO_PORTC, 21, 0); /* LCDD21 */
- at91_set_a_periph(AT91_PIO_PORTC, 22, 0); /* LCDD22 */
- at91_set_a_periph(AT91_PIO_PORTC, 23, 0); /* LCDD23 */
- writel(1 << ATMEL_ID_LCDC, &pmc->pcer);
+} +#endif
when apply this patch, it will show following warning:
.git/rebase-apply/patch:225: new blank line at EOF.
warning: 1 line adds whitespace errors.
ok, I will fix the blank line in v3. thanks.
Best Regards, Josh Wu
Best Regards, Bo Shen