This board has not been converted to CONFIG_DM_MMC by the deadline. Remove it.
Cc: Prafulla Wadaskar prafulla@marvell.com Signed-off-by: Tom Rini trini@konsulko.com --- arch/arm/dts/Makefile | 3 +- arch/arm/dts/kirkwood-sheevaplug-common.dtsi | 104 -------------- arch/arm/dts/kirkwood-sheevaplug.dts | 42 ------ arch/arm/mach-kirkwood/Kconfig | 4 - board/Marvell/sheevaplug/Kconfig | 12 -- board/Marvell/sheevaplug/MAINTAINERS | 6 - board/Marvell/sheevaplug/Makefile | 7 - board/Marvell/sheevaplug/kwbimage.cfg | 144 ------------------- board/Marvell/sheevaplug/sheevaplug.c | 136 ------------------ board/Marvell/sheevaplug/sheevaplug.h | 24 ---- configs/sheevaplug_defconfig | 55 ------- include/configs/sheevaplug.h | 73 ---------- 12 files changed, 1 insertion(+), 609 deletions(-) delete mode 100644 arch/arm/dts/kirkwood-sheevaplug-common.dtsi delete mode 100644 arch/arm/dts/kirkwood-sheevaplug.dts delete mode 100644 board/Marvell/sheevaplug/Kconfig delete mode 100644 board/Marvell/sheevaplug/MAINTAINERS delete mode 100644 board/Marvell/sheevaplug/Makefile delete mode 100644 board/Marvell/sheevaplug/kwbimage.cfg delete mode 100644 board/Marvell/sheevaplug/sheevaplug.c delete mode 100644 board/Marvell/sheevaplug/sheevaplug.h delete mode 100644 configs/sheevaplug_defconfig delete mode 100644 include/configs/sheevaplug.h
diff --git a/arch/arm/dts/Makefile b/arch/arm/dts/Makefile index bc00944acdf4..92aa6c97960a 100644 --- a/arch/arm/dts/Makefile +++ b/arch/arm/dts/Makefile @@ -56,8 +56,7 @@ dtb-$(CONFIG_ARCH_KIRKWOOD) += \ kirkwood-ns2lite.dtb \ kirkwood-ns2max.dtb \ kirkwood-ns2mini.dtb \ - kirkwood-pogo_e02.dtb \ - kirkwood-sheevaplug.dtb + kirkwood-pogo_e02.dtb
dtb-$(CONFIG_MACH_S900) += \ bubblegum_96.dtb diff --git a/arch/arm/dts/kirkwood-sheevaplug-common.dtsi b/arch/arm/dts/kirkwood-sheevaplug-common.dtsi deleted file mode 100644 index 0a698d3b7393..000000000000 --- a/arch/arm/dts/kirkwood-sheevaplug-common.dtsi +++ /dev/null @@ -1,104 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0 -/* - * kirkwood-sheevaplug-common.dtsi - Common parts for Sheevaplugs - * - * Copyright (C) 2013 Simon Baatz gmbnomis@gmail.com - */ - -#include "kirkwood.dtsi" -#include "kirkwood-6281.dtsi" - -/ { - memory { - device_type = "memory"; - reg = <0x00000000 0x20000000>; - }; - - chosen { - bootargs = "console=ttyS0,115200n8 earlyprintk"; - stdout-path = &uart0; - }; - - ocp@f1000000 { - pinctrl: pin-controller@10000 { - - pmx_usb_power_enable: pmx-usb-power-enable { - marvell,pins = "mpp29"; - marvell,function = "gpio"; - }; - pmx_led_red: pmx-led-red { - marvell,pins = "mpp46"; - marvell,function = "gpio"; - }; - pmx_led_blue: pmx-led-blue { - marvell,pins = "mpp49"; - marvell,function = "gpio"; - }; - pmx_sdio_cd: pmx-sdio-cd { - marvell,pins = "mpp44"; - marvell,function = "gpio"; - }; - pmx_sdio_wp: pmx-sdio-wp { - marvell,pins = "mpp47"; - marvell,function = "gpio"; - }; - }; - serial@12000 { - status = "okay"; - }; - }; - - regulators { - compatible = "simple-bus"; - #address-cells = <1>; - #size-cells = <0>; - pinctrl-0 = <&pmx_usb_power_enable>; - pinctrl-names = "default"; - - usb_power: regulator@1 { - compatible = "regulator-fixed"; - reg = <1>; - regulator-name = "USB Power"; - regulator-min-microvolt = <5000000>; - regulator-max-microvolt = <5000000>; - enable-active-high; - regulator-always-on; - regulator-boot-on; - gpio = <&gpio0 29 0>; - }; - }; -}; - -&nand { - status = "okay"; - - partition@0 { - label = "u-boot"; - reg = <0x0000000 0x100000>; - }; - - partition@100000 { - label = "uImage"; - reg = <0x0100000 0x400000>; - }; - - partition@500000 { - label = "root"; - reg = <0x0500000 0x1fb00000>; - }; -}; - -&mdio { - status = "okay"; - - ethphy0: ethernet-phy@0 { - reg = <0>; - }; -}; - -ð0 { - status = "okay"; - ethernet0-port@0 { - phy-handle = <ðphy0>; - }; -}; diff --git a/arch/arm/dts/kirkwood-sheevaplug.dts b/arch/arm/dts/kirkwood-sheevaplug.dts deleted file mode 100644 index c73cc904e5c4..000000000000 --- a/arch/arm/dts/kirkwood-sheevaplug.dts +++ /dev/null @@ -1,42 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0 -/* - * kirkwood-sheevaplug.dts - Device tree file for Sheevaplug - * - * Copyright (C) 2013 Simon Baatz gmbnomis@gmail.com - */ - -/dts-v1/; - -#include "kirkwood-sheevaplug-common.dtsi" - -/ { - model = "Globalscale Technologies SheevaPlug"; - compatible = "globalscale,sheevaplug", "marvell,kirkwood-88f6281", "marvell,kirkwood"; - - ocp@f1000000 { - mvsdio@90000 { - pinctrl-0 = <&pmx_sdio>; - pinctrl-names = "default"; - status = "okay"; - /* No CD or WP GPIOs */ - broken-cd; - }; - }; - - gpio-leds { - compatible = "gpio-leds"; - pinctrl-0 = <&pmx_led_blue &pmx_led_red>; - pinctrl-names = "default"; - - health { - label = "sheevaplug:blue:health"; - gpios = <&gpio1 17 GPIO_ACTIVE_LOW>; - default-state = "keep"; - }; - - misc { - label = "sheevaplug:red:misc"; - gpios = <&gpio1 14 GPIO_ACTIVE_LOW>; - }; - }; -}; diff --git a/arch/arm/mach-kirkwood/Kconfig b/arch/arm/mach-kirkwood/Kconfig index 67f36a9a6318..546a3fc00fdc 100644 --- a/arch/arm/mach-kirkwood/Kconfig +++ b/arch/arm/mach-kirkwood/Kconfig @@ -13,9 +13,6 @@ config TARGET_DS109 config TARGET_GURUPLUG bool "GuruPlug Board"
-config TARGET_SHEEVAPLUG - bool "SheevaPlug Board" - config TARGET_LSXL bool "lsxl Board"
@@ -67,7 +64,6 @@ config SYS_SOC source "board/Marvell/dreamplug/Kconfig" source "board/Synology/ds109/Kconfig" source "board/Marvell/guruplug/Kconfig" -source "board/Marvell/sheevaplug/Kconfig" source "board/buffalo/lsxl/Kconfig" source "board/cloudengines/pogo_e02/Kconfig" source "board/d-link/dns325/Kconfig" diff --git a/board/Marvell/sheevaplug/Kconfig b/board/Marvell/sheevaplug/Kconfig deleted file mode 100644 index e5f928472994..000000000000 --- a/board/Marvell/sheevaplug/Kconfig +++ /dev/null @@ -1,12 +0,0 @@ -if TARGET_SHEEVAPLUG - -config SYS_BOARD - default "sheevaplug" - -config SYS_VENDOR - default "Marvell" - -config SYS_CONFIG_NAME - default "sheevaplug" - -endif diff --git a/board/Marvell/sheevaplug/MAINTAINERS b/board/Marvell/sheevaplug/MAINTAINERS deleted file mode 100644 index 2b0103d07dc9..000000000000 --- a/board/Marvell/sheevaplug/MAINTAINERS +++ /dev/null @@ -1,6 +0,0 @@ -SHEEVAPLUG BOARD -M: Prafulla Wadaskar prafulla@marvell.com -S: Maintained -F: board/Marvell/sheevaplug/ -F: include/configs/sheevaplug.h -F: configs/sheevaplug_defconfig diff --git a/board/Marvell/sheevaplug/Makefile b/board/Marvell/sheevaplug/Makefile deleted file mode 100644 index c39dd03e2d30..000000000000 --- a/board/Marvell/sheevaplug/Makefile +++ /dev/null @@ -1,7 +0,0 @@ -# SPDX-License-Identifier: GPL-2.0+ -# -# (C) Copyright 2009 -# Marvell Semiconductor <www.marvell.com> -# Written-by: Prafulla Wadaskar prafulla@marvell.com - -obj-y := sheevaplug.o diff --git a/board/Marvell/sheevaplug/kwbimage.cfg b/board/Marvell/sheevaplug/kwbimage.cfg deleted file mode 100644 index f5206451da44..000000000000 --- a/board/Marvell/sheevaplug/kwbimage.cfg +++ /dev/null @@ -1,144 +0,0 @@ -# SPDX-License-Identifier: GPL-2.0+ -# -# (C) Copyright 2009 -# Marvell Semiconductor <www.marvell.com> -# Written-by: Prafulla Wadaskar prafulla@marvell.com -# Refer to doc/README.kwbimage for more details about how-to -# configure and create kirkwood boot images. -# - -# Boot Media configurations -BOOT_FROM nand -NAND_ECC_MODE default -NAND_PAGE_SIZE 0x0800 - -# SOC registers configuration using bootrom header extension -# Maximum KWBIMAGE_MAX_CONFIG configurations allowed - -# Configure RGMII-0 interface pad voltage to 1.8V -DATA 0xFFD100e0 0x1b1b1b9b - -#Dram initalization for SINGLE x16 CL=5 @ 400MHz -DATA 0xFFD01400 0x43000c30 # DDR Configuration register -# bit13-0: 0xc30 (3120 DDR2 clks refresh rate) -# bit23-14: zero -# bit24: 1= enable exit self refresh mode on DDR access -# bit25: 1 required -# bit29-26: zero -# bit31-30: 01 - -DATA 0xFFD01404 0x37543000 # DDR Controller Control Low -# bit 4: 0=addr/cmd in smame cycle -# bit 5: 0=clk is driven during self refresh, we don't care for APX -# bit 6: 0=use recommended falling edge of clk for addr/cmd -# bit14: 0=input buffer always powered up -# bit18: 1=cpu lock transaction enabled -# bit23-20: 5=recommended value for CL=5 and STARTBURST_DEL disabled bit31=0 -# bit27-24: 7= CL+2, STARTBURST sample stages, for freqs 400MHz, unbuffered DIMM -# bit30-28: 3 required -# bit31: 0=no additional STARTBURST delay - -DATA 0xFFD01408 0x22125451 # DDR Timing (Low) (active cycles value +1) -# bit3-0: TRAS lsbs -# bit7-4: TRCD -# bit11- 8: TRP -# bit15-12: TWR -# bit19-16: TWTR -# bit20: TRAS msb -# bit23-21: 0x0 -# bit27-24: TRRD -# bit31-28: TRTP - -DATA 0xFFD0140C 0x00000a33 # DDR Timing (High) -# bit6-0: TRFC -# bit8-7: TR2R -# bit10-9: TR2W -# bit12-11: TW2W -# bit31-13: zero required - -DATA 0xFFD01410 0x000000cc # DDR Address Control -# bit1-0: 00, Cs0width=x8 -# bit3-2: 11, Cs0size=1Gb -# bit5-4: 00, Cs1width=x8 -# bit7-6: 11, Cs1size=1Gb -# bit9-8: 00, Cs2width=nonexistent -# bit11-10: 00, Cs2size =nonexistent -# bit13-12: 00, Cs3width=nonexistent -# bit15-14: 00, Cs3size =nonexistent -# bit16: 0, Cs0AddrSel -# bit17: 0, Cs1AddrSel -# bit18: 0, Cs2AddrSel -# bit19: 0, Cs3AddrSel -# bit31-20: 0 required - -DATA 0xFFD01414 0x00000000 # DDR Open Pages Control -# bit0: 0, OpenPage enabled -# bit31-1: 0 required - -DATA 0xFFD01418 0x00000000 # DDR Operation -# bit3-0: 0x0, DDR cmd -# bit31-4: 0 required - -DATA 0xFFD0141C 0x00000C52 # DDR Mode -# bit2-0: 2, BurstLen=2 required -# bit3: 0, BurstType=0 required -# bit6-4: 4, CL=5 -# bit7: 0, TestMode=0 normal -# bit8: 0, DLL reset=0 normal -# bit11-9: 6, auto-precharge write recovery ???????????? -# bit12: 0, PD must be zero -# bit31-13: 0 required - -DATA 0xFFD01420 0x00000040 # DDR Extended Mode -# bit0: 0, DDR DLL enabled -# bit1: 0, DDR drive strenght normal -# bit2: 0, DDR ODT control lsd (disabled) -# bit5-3: 000, required -# bit6: 1, DDR ODT control msb, (disabled) -# bit9-7: 000, required -# bit10: 0, differential DQS enabled -# bit11: 0, required -# bit12: 0, DDR output buffer enabled -# bit31-13: 0 required - -DATA 0xFFD01424 0x0000F17F # DDR Controller Control High -# bit2-0: 111, required -# bit3 : 1 , MBUS Burst Chop disabled -# bit6-4: 111, required -# bit7 : 0 -# bit8 : 1 , add writepath sample stage, must be 1 for DDR freq >= 300MHz -# bit9 : 0 , no half clock cycle addition to dataout -# bit10 : 0 , 1/4 clock cycle skew enabled for addr/ctl signals -# bit11 : 0 , 1/4 clock cycle skew disabled for write mesh -# bit15-12: 1111 required -# bit31-16: 0 required - -DATA 0xFFD01428 0x00085520 # DDR2 ODT Read Timing (default values) -DATA 0xFFD0147C 0x00008552 # DDR2 ODT Write Timing (default values) - -DATA 0xFFD01500 0x00000000 # CS[0]n Base address to 0x0 -DATA 0xFFD01504 0x0FFFFFF1 # CS[0]n Size -# bit0: 1, Window enabled -# bit1: 0, Write Protect disabled -# bit3-2: 00, CS0 hit selected -# bit23-4: ones, required -# bit31-24: 0x0F, Size (i.e. 256MB) - -DATA 0xFFD01508 0x10000000 # CS[1]n Base address to 256Mb -DATA 0xFFD0150C 0x0FFFFFF5 # CS[1]n Size 256Mb Window enabled for CS1 - -DATA 0xFFD01514 0x00000000 # CS[2]n Size, window disabled -DATA 0xFFD0151C 0x00000000 # CS[3]n Size, window disabled - -DATA 0xFFD01494 0x00030000 # DDR ODT Control (Low) -DATA 0xFFD01498 0x00000000 # DDR ODT Control (High) -# bit1-0: 00, ODT0 controlled by ODT Control (low) register above -# bit3-2: 01, ODT1 active NEVER! -# bit31-4: zero, required - -DATA 0xFFD0149C 0x0000E803 # CPU ODT Control -DATA 0xFFD01480 0x00000001 # DDR Initialization Control -#bit0=1, enable DDR init upon this register write - -# End of Header extension -DATA 0x0 0x0 diff --git a/board/Marvell/sheevaplug/sheevaplug.c b/board/Marvell/sheevaplug/sheevaplug.c deleted file mode 100644 index 0cc7f2b39243..000000000000 --- a/board/Marvell/sheevaplug/sheevaplug.c +++ /dev/null @@ -1,136 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0+ -/* - * (C) Copyright 2009 - * Marvell Semiconductor <www.marvell.com> - * Written-by: Prafulla Wadaskar prafulla@marvell.com - */ - -#include <common.h> -#include <init.h> -#include <miiphy.h> -#include <net.h> -#include <asm/global_data.h> -#include <asm/mach-types.h> -#include <asm/arch/cpu.h> -#include <asm/arch/soc.h> -#include <asm/arch/mpp.h> -#include "sheevaplug.h" - -DECLARE_GLOBAL_DATA_PTR; - -int board_early_init_f(void) -{ - /* - * default gpio configuration - * There are maximum 64 gpios controlled through 2 sets of registers - * the below configuration configures mainly initial LED status - */ - mvebu_config_gpio(SHEEVAPLUG_OE_VAL_LOW, - SHEEVAPLUG_OE_VAL_HIGH, - SHEEVAPLUG_OE_LOW, SHEEVAPLUG_OE_HIGH); - - /* Multi-Purpose Pins Functionality configuration */ - static const u32 kwmpp_config[] = { - MPP0_NF_IO2, - MPP1_NF_IO3, - MPP2_NF_IO4, - MPP3_NF_IO5, - MPP4_NF_IO6, - MPP5_NF_IO7, - MPP6_SYSRST_OUTn, - MPP7_GPO, - MPP8_UART0_RTS, - MPP9_UART0_CTS, - MPP10_UART0_TXD, - MPP11_UART0_RXD, - MPP12_SD_CLK, - MPP13_SD_CMD, - MPP14_SD_D0, - MPP15_SD_D1, - MPP16_SD_D2, - MPP17_SD_D3, - MPP18_NF_IO0, - MPP19_NF_IO1, - MPP20_GPIO, - MPP21_GPIO, - MPP22_GPIO, - MPP23_GPIO, - MPP24_GPIO, - MPP25_GPIO, - MPP26_GPIO, - MPP27_GPIO, - MPP28_GPIO, - MPP29_TSMP9, - MPP30_GPIO, - MPP31_GPIO, - MPP32_GPIO, - MPP33_GPIO, - MPP34_GPIO, - MPP35_GPIO, - MPP36_GPIO, - MPP37_GPIO, - MPP38_GPIO, - MPP39_GPIO, - MPP40_GPIO, - MPP41_GPIO, - MPP42_GPIO, - MPP43_GPIO, - MPP44_GPIO, - MPP45_GPIO, - MPP46_GPIO, - MPP47_GPIO, - MPP48_GPIO, - MPP49_GPIO, - 0 - }; - kirkwood_mpp_conf(kwmpp_config, NULL); - return 0; -} - -int board_init(void) -{ - /* - * arch number of board - */ - gd->bd->bi_arch_number = MACH_TYPE_SHEEVAPLUG; - - /* adress of boot parameters */ - gd->bd->bi_boot_params = mvebu_sdram_bar(0) + 0x100; - - return 0; -} - -#ifdef CONFIG_RESET_PHY_R -/* Configure and enable MV88E1116 PHY */ -void reset_phy(void) -{ - u16 reg; - u16 devadr; - char *name = "egiga0"; - - if (miiphy_set_current_dev(name)) - return; - - /* command to read PHY dev address */ - if (miiphy_read(name, 0xEE, 0xEE, (u16 *) &devadr)) { - printf("Err..%s could not read PHY dev address\n", - __FUNCTION__); - return; - } - - /* - * Enable RGMII delay on Tx and Rx for CPU port - * Ref: sec 4.7.2 of chip datasheet - */ - miiphy_write(name, devadr, MV88E1116_PGADR_REG, 2); - miiphy_read(name, devadr, MV88E1116_MAC_CTRL_REG, ®); - reg |= (MV88E1116_RGMII_RXTM_CTRL | MV88E1116_RGMII_TXTM_CTRL); - miiphy_write(name, devadr, MV88E1116_MAC_CTRL_REG, reg); - miiphy_write(name, devadr, MV88E1116_PGADR_REG, 0); - - /* reset the phy */ - miiphy_reset(name, devadr); - - printf("88E1116 Initialized on %s\n", name); -} -#endif /* CONFIG_RESET_PHY_R */ diff --git a/board/Marvell/sheevaplug/sheevaplug.h b/board/Marvell/sheevaplug/sheevaplug.h deleted file mode 100644 index e026c1b53bd0..000000000000 --- a/board/Marvell/sheevaplug/sheevaplug.h +++ /dev/null @@ -1,24 +0,0 @@ -/* SPDX-License-Identifier: GPL-2.0+ */ -/* - * (C) Copyright 2009 - * Marvell Semiconductor <www.marvell.com> - * Written-by: Prafulla Wadaskar prafulla@marvell.com - */ - -#ifndef __SHEEVAPLUG_H -#define __SHEEVAPLUG_H - -#define SHEEVAPLUG_OE_LOW (~(0)) -#define SHEEVAPLUG_OE_HIGH (~(0)) -#define SHEEVAPLUG_OE_VAL_LOW (1 << 29) /* USB_PWEN low */ -#define SHEEVAPLUG_OE_VAL_HIGH (1 << 17) /* LED pin high */ - -/* PHY related */ -#define MV88E1116_LED_FCTRL_REG 10 -#define MV88E1116_CPRSP_CR3_REG 21 -#define MV88E1116_MAC_CTRL_REG 21 -#define MV88E1116_PGADR_REG 22 -#define MV88E1116_RGMII_TXTM_CTRL (1 << 4) -#define MV88E1116_RGMII_RXTM_CTRL (1 << 5) - -#endif /* __SHEEVAPLUG_H */ diff --git a/configs/sheevaplug_defconfig b/configs/sheevaplug_defconfig deleted file mode 100644 index 34da356b8e2a..000000000000 --- a/configs/sheevaplug_defconfig +++ /dev/null @@ -1,55 +0,0 @@ -CONFIG_ARM=y -CONFIG_SYS_DCACHE_OFF=y -CONFIG_ARCH_CPU_INIT=y -CONFIG_SYS_THUMB_BUILD=y -CONFIG_ARCH_KIRKWOOD=y -CONFIG_SYS_TEXT_BASE=0x600000 -CONFIG_NR_DRAM_BANKS=2 -CONFIG_TARGET_SHEEVAPLUG=y -CONFIG_ENV_SIZE=0x20000 -CONFIG_ENV_OFFSET=0x80000 -CONFIG_IDENT_STRING="\nMarvell-Sheevaplug" -CONFIG_DEFAULT_DEVICE_TREE="kirkwood-sheevaplug" -# CONFIG_SYS_MALLOC_F is not set -CONFIG_BOOTDELAY=3 -CONFIG_USE_PREBOOT=y -# CONFIG_DISPLAY_BOARDINFO is not set -CONFIG_HUSH_PARSER=y -CONFIG_CMD_BOOTZ=y -# CONFIG_CMD_FLASH is not set -CONFIG_CMD_IDE=y -CONFIG_CMD_MMC=y -CONFIG_CMD_NAND=y -CONFIG_CMD_USB=y -# CONFIG_CMD_SETEXPR is not set -CONFIG_CMD_DHCP=y -CONFIG_CMD_MII=y -CONFIG_CMD_PING=y -CONFIG_CMD_EXT2=y -CONFIG_CMD_EXT4=y -CONFIG_CMD_FAT=y -CONFIG_CMD_JFFS2=y -CONFIG_CMD_MTDPARTS=y -CONFIG_MTDIDS_DEFAULT="nand0=orion_nand" -CONFIG_MTDPARTS_DEFAULT="mtdparts=orion_nand:512K(uboot),512K(env),4M(kernel),-(rootfs)" -CONFIG_CMD_UBI=y -CONFIG_ISO_PARTITION=y -CONFIG_OF_CONTROL=y -CONFIG_ENV_OVERWRITE=y -CONFIG_ENV_IS_IN_NAND=y -CONFIG_NETCONSOLE=y -CONFIG_DM=y -CONFIG_MVSATA_IDE=y -CONFIG_MTD=y -CONFIG_MTD_RAW_NAND=y -CONFIG_MVGBE=y -CONFIG_MII=y -CONFIG_DM_RTC=y -CONFIG_RTC_MV=y -CONFIG_SYS_NS16550=y -CONFIG_USB=y -CONFIG_DM_USB=y -CONFIG_USB_EHCI_HCD=y -CONFIG_USB_STORAGE=y -CONFIG_LZMA=y -CONFIG_BZIP2=y diff --git a/include/configs/sheevaplug.h b/include/configs/sheevaplug.h deleted file mode 100644 index e1f8fb8ac84b..000000000000 --- a/include/configs/sheevaplug.h +++ /dev/null @@ -1,73 +0,0 @@ -/* SPDX-License-Identifier: GPL-2.0+ */ -/* - * (C) Copyright 2009-2014 - * Gerald Kerma dreagle@doukki.net - * Marvell Semiconductor <www.marvell.com> - * Written-by: Prafulla Wadaskar prafulla@marvell.com - */ - -#ifndef _CONFIG_SHEEVAPLUG_H -#define _CONFIG_SHEEVAPLUG_H - -/* - * High Level Configuration Options (easy to change) - */ -#define CONFIG_FEROCEON_88FR131 1 /* CPU Core subversion */ - -#include "mv-plug-common.h" - -/* - * Environment variables configurations - */ -/* - * max 4k env size is enough, but in case of nand - * it has to be rounded to sector size - */ -/* - * Environment is right behind U-Boot in flash. Make sure U-Boot - * doesn't grow into the environment area. - */ -#define CONFIG_BOARD_SIZE_LIMIT CONFIG_ENV_OFFSET - -/* - * Default environment variables - */ -#define CONFIG_BOOTCOMMAND "${x_bootcmd_kernel}; " \ - "setenv bootargs ${x_bootargs} ${x_bootargs_root}; " \ - "bootm 0x6400000;" - -#define CONFIG_EXTRA_ENV_SETTINGS "x_bootargs=console" \ - "=ttyS0,115200 mtdparts="CONFIG_MTDPARTS_DEFAULT \ - "x_bootcmd_kernel=nand read 0x6400000 0x100000 0x400000\0" \ - "x_bootcmd_usb=usb start\0" \ - "x_bootargs_root=root=/dev/mtdblock3 rw rootfstype=jffs2\0" - -/* - * Ethernet Driver configuration - */ -#ifdef CONFIG_CMD_NET -#define CONFIG_MVGBE_PORTS {1, 0} /* enable port 0 only */ -#define CONFIG_PHY_BASE_ADR 0 -#endif /* CONFIG_CMD_NET */ - -/* - * SDIO/MMC Card Configuration - */ -#ifdef CONFIG_CMD_MMC -#define CONFIG_MVEBU_MMC -#define CONFIG_SYS_MMC_BASE KW_SDIO_BASE -#endif /* CONFIG_CMD_MMC */ - -/* - * SATA driver configuration - */ -#ifdef CONFIG_IDE -#define __io -#define CONFIG_IDE_PREINIT -#define CONFIG_MVSATA_IDE_USE_PORT0 -#define CONFIG_MVSATA_IDE_USE_PORT1 -#define CONFIG_SYS_ATA_IDE0_OFFSET MV_SATA_PORT0_OFFSET -#define CONFIG_SYS_ATA_IDE1_OFFSET MV_SATA_PORT1_OFFSET -#endif /* CONFIG_IDE */ - -#endif /* _CONFIG_SHEEVAPLUG_H */