OP-TEE is an open source trusted OS, in armv7, its loading and running are like this: loading: - SPL load both OP-TEE and U-Boot running: - SPL run into OP-TEE in secure mode; - OP-TEE run into U-Boot in non-secure mode;
More detail: https://github.com/OP-TEE/optee_os and search for 'boot arguments' for detail entry parameter in: core/arch/arm/kernel/generic_entry_a32.S
Signed-off-by: Kever Yang kever.yang@rock-chips.com ---
Changes in v3: None Changes in v2: - Using new image type for op-tee
common/spl/Kconfig | 7 +++++++ common/spl/Makefile | 1 + common/spl/spl.c | 8 ++++++++ common/spl/spl_optee.S | 13 +++++++++++++ include/spl.h | 9 +++++++++ 5 files changed, 38 insertions(+) create mode 100644 common/spl/spl_optee.S
diff --git a/common/spl/Kconfig b/common/spl/Kconfig index aef0034..c9a1ebb 100644 --- a/common/spl/Kconfig +++ b/common/spl/Kconfig @@ -725,6 +725,13 @@ config SPL_ATF is loaded by SPL(which is considered as BL2 in ATF terminology). More detail at: https://github.com/ARM-software/arm-trusted-firmware
+config SPL_OPTEE + bool "Support OP-TEE Trusted OS" + depends on ARM + help + OP-TEE is an open source Trusted OS which is loaded by SPL. + More detail at: https://github.com/OP-TEE/optee_os + config TPL bool depends on SUPPORT_TPL diff --git a/common/spl/Makefile b/common/spl/Makefile index 9bf8a2d..9918a2e 100644 --- a/common/spl/Makefile +++ b/common/spl/Makefile @@ -23,6 +23,7 @@ obj-$(CONFIG_$(SPL_TPL_)UBI) += spl_ubi.o obj-$(CONFIG_$(SPL_TPL_)NET_SUPPORT) += spl_net.o obj-$(CONFIG_$(SPL_TPL_)MMC_SUPPORT) += spl_mmc.o obj-$(CONFIG_$(SPL_TPL_)ATF) += spl_atf.o +obj-$(CONFIG_$(SPL_TPL_)OPTEE) += spl_optee.o obj-$(CONFIG_$(SPL_TPL_)USB_SUPPORT) += spl_usb.o obj-$(CONFIG_$(SPL_TPL_)FAT_SUPPORT) += spl_fat.o obj-$(CONFIG_$(SPL_TPL_)EXT_SUPPORT) += spl_ext.o diff --git a/common/spl/spl.c b/common/spl/spl.c index 76c1963..2c8942b 100644 --- a/common/spl/spl.c +++ b/common/spl/spl.c @@ -436,6 +436,12 @@ void board_init_r(gd_t *dummy1, ulong dummy2) spl_invoke_atf(&spl_image); break; #endif +#if CONFIG_IS_ENABLED(OPTEE) + case IH_OS_OP_TEE: + debug("Jumping to U-Boot via OP-TEE\n"); + spl_optee_entry(0, 0, 0, (void *)spl_image.entry_point); + break; +#endif #ifdef CONFIG_SPL_OS_BOOT case IH_OS_LINUX: debug("Jumping to Linux\n"); @@ -450,6 +456,8 @@ void board_init_r(gd_t *dummy1, ulong dummy2) debug("SPL malloc() used %#lx bytes (%ld KB)\n", gd->malloc_ptr, gd->malloc_ptr / 1024); #endif + + debug("loaded - jumping to U-Boot...\n"); #ifdef CONFIG_BOOTSTAGE_STASH int ret;
diff --git a/common/spl/spl_optee.S b/common/spl/spl_optee.S new file mode 100644 index 0000000..4f7f8ba --- /dev/null +++ b/common/spl/spl_optee.S @@ -0,0 +1,13 @@ +/* + * Copyright (C) 2017 Rockchip Electronic Co.,Ltd + * + * SPDX-License-Identifier: GPL-2.0+ + */ + +#include <linux/linkage.h> +#include <asm/assembler.h> + +ENTRY(spl_optee_entry) + ldr lr, =CONFIG_SYS_TEXT_BASE + mov pc, r3 +ENDPROC(spl_optee_entry) diff --git a/include/spl.h b/include/spl.h index c14448b..551ce43 100644 --- a/include/spl.h +++ b/include/spl.h @@ -288,6 +288,15 @@ int spl_mmc_load_image(struct spl_image_info *spl_image, void spl_invoke_atf(struct spl_image_info *spl_image);
/** + * spl_optee_entry - entry function for optee + * entry arg0, pagestore + * entry arg1, (ARMv7 standard bootarg #1) + * entry arg2, device tree address, (ARMv7 standard bootarg #2) + * entry arg3, non-secure entry address (ARMv7 bootarg #0) + */ +void spl_optee_entry(void *arg0, void *arg1, void *arg2, void *arg3); + +/** * board_return_to_bootrom - allow for boards to continue with the boot ROM * * If a board (e.g. the Rockchip RK3368 boards) provide some