Re: [U-Boot] [PATCH 1/4] mmc: fsl_esdhc: Add CMD11 support to switch to 1.8V

On Tue, Feb 17, 2015 at 5:11 AM, Marek Vasut marex@denx.de wrote:

On Monday, February 16, 2015 at 10:38:00 PM, Otavio Salvador wrote:

...

This adds support to switch to 1.8V in case CMD11 succeeds.

Signed-off-by: Otavio Salvador otavio@ossystems.com.br

[...]

...

@@ -413,6 +424,11 @@ out: while ((esdhc_read32(&regs->sysctl) & SYSCTL_RSTD)) ; }

•         /* If this was CMD11, then notify that power cycle is needed */
  

•         if (cmd->cmdidx == SD_CMD_SWITCH_UHS18V)
  

•                 printf("CMD11 to switch to 1.8V mode failed."
  

•                         "Card requires power cycle\n");
  

Please avoid breaking strings, you cannot 'git grep' for them if they're broken.

Agreed. I will prepare a v2 with this fixed.