With the latest transition to device tree, there is a need to simplify the load of device tree depending on board type etc. While at it, simplify few other changes as well.
Testing: with a uEnv.txt as: bootdir=/ bootpart=0:1
The following were the boot results: Beagle (rev C1D): http://pastebin.com/fMdsKkgr Beagle XM (rev C1): http://pastebin.com/p1zp9AhG
Changes in V3 since v2: - Minor fixes for RevB beagleboard DVIpup handling http://marc.info/?t=137357970500004&r=1&w=2 - Picked up acked-by from http://marc.info/?t=137357970700007&r=1&w=2
V2: http://marc.info/?l=u-boot&m=137358206228251&w=2 V1: http://marc.info/?l=u-boot&m=137357963227510&w=2
Nishanth Menon (6): omap3_beagle: remove JFFS2 support. omap3_beagle: replace uImage.beagle with generic uImage beagleboard: remove RevB support for BeagleBoard Xm omap3_beagle: enable CMD_FS_GENERIC and simplify load of image/ramdisk omap3_beagle: support findfdt and loadfdt for devicetree support omap3_beagle: support booting from zImage and device tree as last option
board/ti/beagle/beagle.c | 28 +++++++------------------ board/ti/beagle/beagle.h | 3 +-- include/configs/omap3_beagle.h | 44 ++++++++++++++++++++++++++++------------ 3 files changed, 39 insertions(+), 36 deletions(-)