The sphinx-prompt documentation[0] provides examples on how we can use prompt as a parameter to simplify the description. Use the same.
[0] http://sbrunner.github.io/sphinx-prompt/
Signed-off-by: Nishanth Menon nm@ti.com --- doc/board/ti/am335x_evm.rst | 39 +++++++++++++------------------------ doc/board/ti/dra7xx_evm.rst | 3 +-- doc/board/ti/k3.rst | 6 ++---- doc/board/ti/ks2_evm.rst | 9 +++------ 4 files changed, 19 insertions(+), 38 deletions(-)
diff --git a/doc/board/ti/am335x_evm.rst b/doc/board/ti/am335x_evm.rst index 2ba651eb6df9..769362816b78 100644 --- a/doc/board/ti/am335x_evm.rst +++ b/doc/board/ti/am335x_evm.rst @@ -84,8 +84,7 @@ bootable image was not created.
Within the SECDEV package exists an image creation script:
-.. prompt:: bash - :prompts: $ +.. prompt:: bash $
${TI_SECURE_DEV_PKG}/scripts/create-boot-image.sh
@@ -97,8 +96,7 @@ possible. The script is basically the only required interface to the TI SECDEV package for creating a bootable SPL image for secure TI devices.
-.. prompt:: bash - :prompts: $ +.. prompt:: bash $
create-boot-image.sh \ <IMAGE_FLAG> <INPUT_FILE> <OUTPUT_FILE> <SPL_LOAD_ADDR> @@ -184,8 +182,7 @@ The exact details of the how the images are secured is handled by the SECDEV package. Within the SECDEV package exists a script to process an input binary image:
-.. prompt:: bash - :prompts: $ +.. prompt:: bash $
${TI_SECURE_DEV_PKG}/scripts/secure-binary-image.sh
@@ -206,8 +203,7 @@ only accessible when the ARM core is operating in the secure mode). Invoking the secure-binary-image script for Secure Devices ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
-.. prompt:: bash - :prompts: $ +.. prompt:: bash $
secure-binary-image.sh <INPUT_FILE> <OUTPUT_FILE>
@@ -247,8 +243,7 @@ into memory, then written to NAND.
2. Flashing NAND via MMC/SD
-.. prompt:: bash - :prompts: => +.. prompt:: bash =>
# select BOOTSEL to MMC/SD boot and boot from MMC/SD card mmc rescan @@ -334,8 +329,7 @@ had a FAT partition (such as on a Beaglebone Black) it is not enough to write garbage into the area, you must delete it from the partition table first.
-.. prompt:: bash - :prompts: => +.. prompt:: bash =>
# Ensure we are able to talk with this mmc device mmc rescan @@ -366,8 +360,7 @@ the FAT filesystem (only the uImage MUST be for this to function afterwards) along with a Falcon Mode aware MLO and the FAT partition has already been created and marked bootable:
-.. prompt:: bash - :prompts: => +.. prompt:: bash =>
mmc rescan # Load kernel and device tree into memory, perform export @@ -386,8 +379,7 @@ This will print a number of lines and then end with something like:
So then you:
-.. prompt:: bash - :prompts: => +.. prompt:: bash =>
fatwrite mmc 0:1 0x80f80000 args 8928
@@ -400,8 +392,7 @@ already located on the NAND somewhere (such as filesystem or mtd partition) along with a Falcon Mode aware MLO written to the correct locations for booting and mtdparts have been configured correctly for the board:
-.. prompt:: bash - :prompts: => +.. prompt:: bash =>
nand read ${loadaddr} kernel load nand rootfs ${fdtaddr} /boot/am335x-evm.dtb @@ -425,8 +416,7 @@ The output of the 'dm tree' command shows which driver is bound to which device, so the user can easily configure their platform differently from the command line:
-.. prompt:: bash - :prompts: => +.. prompt:: bash =>
dm tree
@@ -444,8 +434,7 @@ the command line: Typically here any network command performed using the usb_ether interface would work, while using other gadgets would fail:
-.. prompt:: bash - :prompts: => +.. prompt:: bash =>
fastboot usb 0
@@ -462,8 +451,7 @@ least from a bootloader point of view). The solution here would be to use the unbind command specifying the class and index parameters (as shown above in the 'dm tree' output) to target the driver to unbind:
-.. prompt:: bash - :prompts: => +.. prompt:: bash =>
unbind ethernet 1
@@ -471,8 +459,7 @@ The output of the 'dm tree' command now shows the availability of the first USB device controller, the fastboot gadget will now be able to bind with it:
-.. prompt:: bash - :prompts: => +.. prompt:: bash =>
dm tree
diff --git a/doc/board/ti/dra7xx_evm.rst b/doc/board/ti/dra7xx_evm.rst index 4503b5e92229..8e5d95535fa0 100644 --- a/doc/board/ti/dra7xx_evm.rst +++ b/doc/board/ti/dra7xx_evm.rst @@ -71,8 +71,7 @@ example we load MLO and u-boot.img from the build into DDR and then use 'mmc bootbus' to set the required rate (see TRM) and 'mmc partconfig' to set boot0 as the boot device.
-.. prompt:: bash - :prompts: => +.. prompt:: bash =>
setenv autoload no usb start diff --git a/doc/board/ti/k3.rst b/doc/board/ti/k3.rst index 89d70db88647..e9bbe7c09794 100644 --- a/doc/board/ti/k3.rst +++ b/doc/board/ti/k3.rst @@ -476,8 +476,7 @@ then the saveenv command and can be used across various bootmodes too.
**Writing to MMC/EMMC**
-.. prompt:: bash - :prompts: => +.. prompt:: bash =>
env export -t $loadaddr <list of variables> fatwrite mmc ${mmcdev} ${loadaddr} ${bootenvfile} ${filesize} @@ -490,8 +489,7 @@ mmcdev) and set the environments. If manually needs to be done then the environment can be read from the filesystem and then imported
-.. prompt:: bash - :prompts: => +.. prompt:: bash =>
fatload mmc ${mmcdev} ${loadaddr} ${bootenvfile} env import -t ${loadaddr} ${filesize} diff --git a/doc/board/ti/ks2_evm.rst b/doc/board/ti/ks2_evm.rst index 0a789037a6a8..adfceca9f4d2 100644 --- a/doc/board/ti/ks2_evm.rst +++ b/doc/board/ti/ks2_evm.rst @@ -122,8 +122,7 @@ Don't forget to add CROSS_COMPILE.
To build u-boot.bin, u-boot-spi.gph, MLO:
-.. prompt:: bash - :prompts: $ +.. prompt:: bash $
make k2hk_evm_defconfig make @@ -197,8 +196,7 @@ instructions: 4. Free Run the target as described earlier (step 4) to get U-Boot prompt 5. At the U-Boot console type following to setup U-Boot environment variables.
-.. prompt:: bash - :prompts: => +.. prompt:: bash =>
setenv addr_uboot 0x87000000 setenv filesize <size in hex of u-boot-spi.gph rounded to hex 0x10000> @@ -226,8 +224,7 @@ instructions: 4. Free Run the target as described earlier (step 4) to get U-Boot prompt 5. At the U-Boot console type following to setup U-Boot environment variables.
-.. prompt:: bash - :prompts: => +.. prompt:: bash =>
setenv filesize <size in hex of MLO rounded to hex 0x10000> run burn_uboot_nand