This series addresses some shortcomings, enables/introduces device tree support and converts all except video to using the driver model. This is fully tested both running our latest downstream BSP as well as the mainline Linux kernel.
Changes in v2: - Remove spurious mentioning of DFU MMC both in subject as well as description. - Use GPL-2.0+ OR X11 instead of GPL-2.0 OR MIT to be more consistent with all our other device trees. - Further comments and white-space clean-up. - Also add SION bit for Apalis, backlight, eMMC reset and Ethernet PHY reset GPIOs. - Also request MMC/SD CD and USB power GPIOs. - Clean-up and re-order includes. - White-space clean-up. - Also update copyright year in PMIC header file. - And drop compiler.h include. - Remove Colibri iMX6 change which inadvertently slipped in here. - Also fix device tree naming for MMC DFU.
Gerard Salvatella (1): board: apalis_imx6: check for and report ecc errors in fuses
Marcel Ziswiler (16): apalis_imx6: get rid of obsolete nospl configurations apalis_imx6: use distro defaults apalis_imx6: move console in env from header file to defconfig apalis_imx6: enable fit image, gpt, imx thermal, efi loader support apalis_imx6: remove obsolete USB_GADGET_MASS_STORAGE configuration apalis_imx6: migrate to using device tree apalis_imx6: clean-up and migrate gpios to using driver model apalis_imx6: enable pin control driver apalis_imx6: migrate i2c to using driver model apalis_imx6: migrate pmic and regulator to using driver model apalis_imx6: migrate mmc and sata to using driver model apalis_imx6: migrate usb to using driver model apalis_imx6: drop CONFIG_OF_SYSTEM_SETUP apalis_imx6: add distroboot support apalis_imx6: pf0100: reorder and cleanup message printing apalis_imx6: switch to zimage
Max Krummenacher (4): apalis_imx6: use both sd/mmc interfaces for setsdupdate apalis_imx6: unify sd/mmc drive strength with linux kernel settings apalis_imx6: disable ri and dcd irq in uarts apalis_imx6: revert fuse value set in mfgr_fuse
Sanchayan Maity (1): configs: apalis_imx6: Use ext4 file system by default
Stefan Agner (1): apalis_imx6: use SDP if USB serial downloader has been used
arch/arm/dts/imx6-apalis.dts | 730 ++++++++++++++++++ .../toradex/apalis_imx6/1066mhz_4x128mx16.cfg | 47 -- .../toradex/apalis_imx6/1066mhz_4x256mx16.cfg | 47 -- board/toradex/apalis_imx6/MAINTAINERS | 4 +- board/toradex/apalis_imx6/apalis_imx6.c | 341 ++++---- board/toradex/apalis_imx6/apalis_imx6q.cfg | 33 - board/toradex/apalis_imx6/clocks.cfg | 41 - board/toradex/apalis_imx6/ddr-setup.cfg | 96 --- board/toradex/apalis_imx6/do_fuse.c | 2 +- board/toradex/apalis_imx6/pf0100.c | 206 +++-- board/toradex/apalis_imx6/pf0100.h | 59 +- configs/apalis_imx6_defconfig | 35 +- configs/apalis_imx6_nospl_com_defconfig | 65 -- configs/apalis_imx6_nospl_it_defconfig | 65 -- include/configs/apalis_imx6.h | 83 +- 15 files changed, 1119 insertions(+), 735 deletions(-) create mode 100644 arch/arm/dts/imx6-apalis.dts delete mode 100644 board/toradex/apalis_imx6/1066mhz_4x128mx16.cfg delete mode 100644 board/toradex/apalis_imx6/1066mhz_4x256mx16.cfg delete mode 100644 board/toradex/apalis_imx6/apalis_imx6q.cfg delete mode 100644 board/toradex/apalis_imx6/clocks.cfg delete mode 100644 board/toradex/apalis_imx6/ddr-setup.cfg delete mode 100644 configs/apalis_imx6_nospl_com_defconfig delete mode 100644 configs/apalis_imx6_nospl_it_defconfig