Re: [U-Boot-Users] Debug u-boot with SAM-ICE/J-link

On 22:53 Mon 12 May , Norman Cheung wrote:

I would like to know what is the quickest way to set up Atmel's SAM-ICE with the AT91SAM9260EK board to run GDB? My preference is to run under a linux host, but I can run under Windows if that is easier to setup.

Any ideas, suggestions or experiences.

Normaly you have an Manuel on the Atmel Web site explainig it.

But you need a Windows Host to run the JLInk gdb server but after you can connect to it with a linux station

I you really need to run everything over Linux I recommand to use a BDI2000/BDI3000 or Ronetix

Best Regards, J.