In J721e remote processors are booted from U-Boot by using the command 'boot_rprocs' and the env variable 'dorprocboot'. Remote processors are booted only when 'dorprocboot' it set to 1. By default this variable is set to 0, so that it can be enabled through user specific environment files.
Therefore, fix the bootcmd to reflect the same.
Fixes: 5980925e2a5a ("include: configs: j721e_evm: Add support to boot ethfw core in j721e") Signed-off-by: Aswath Govindraju a-govindraju@ti.com --- configs/j721e_evm_a72_defconfig | 2 +- include/configs/j721e_evm.h | 1 - 2 files changed, 1 insertion(+), 2 deletions(-)
diff --git a/configs/j721e_evm_a72_defconfig b/configs/j721e_evm_a72_defconfig index b843a84415b1..4d62585b247c 100644 --- a/configs/j721e_evm_a72_defconfig +++ b/configs/j721e_evm_a72_defconfig @@ -29,7 +29,7 @@ CONFIG_DISTRO_DEFAULTS=y CONFIG_SPL_LOAD_FIT=y CONFIG_SPL_LOAD_FIT_ADDRESS=0x81000000 # CONFIG_USE_SPL_FIT_GENERATOR is not set -CONFIG_BOOTCOMMAND="run findfdt; run distro_bootcmd; run init_${boot}; run main_cpsw0_qsgmii_phyinit; run get_kern_${boot}; run get_fdt_${boot}; run get_overlay_${boot}; run run_kern" +CONFIG_BOOTCOMMAND="run findfdt; run distro_bootcmd; run init_${boot}; run boot_rprocs; run main_cpsw0_qsgmii_phyinit; run get_kern_${boot}; run get_fdt_${boot}; run get_overlay_${boot}; run run_kern" CONFIG_LOGLEVEL=7 CONFIG_SPL_BOARD_INIT=y CONFIG_SPL_SYS_MALLOC_SIMPLE=y diff --git a/include/configs/j721e_evm.h b/include/configs/j721e_evm.h index e4b167dd219d..2d86b7fbb089 100644 --- a/include/configs/j721e_evm.h +++ b/include/configs/j721e_evm.h @@ -124,7 +124,6 @@ /* Set the default list of remote processors to boot */ #if defined(CONFIG_TARGET_J721E_A72_EVM) || defined(CONFIG_TARGET_J7200_A72_EVM) #define EXTRA_ENV_CONFIG_MAIN_CPSW0_QSGMII_PHY \ - "dorprocboot=1\0" \ "do_main_cpsw0_qsgmii_phyinit=1\0" \ "init_main_cpsw0_qsgmii_phy=gpio set gpio@22_17;" \ "gpio clear gpio@22_16\0" \