Define LOG_CATEGORY, use dev_ macro when it is possible and migrate other trace to log_ macro.
Signed-off-by: Patrick Delaunay patrick.delaunay@st.com Reviewed-by: Patrice Chotard patrice.chotard@st.com ---
Changes in v2: - Add dm/device_compat.h
drivers/ram/stm32mp1/stm32mp1_ddr.c | 36 +++--- drivers/ram/stm32mp1/stm32mp1_interactive.c | 4 +- drivers/ram/stm32mp1/stm32mp1_ram.c | 38 +++--- drivers/ram/stm32mp1/stm32mp1_tests.c | 19 +-- drivers/ram/stm32mp1/stm32mp1_tuning.c | 124 ++++++++++---------- 5 files changed, 117 insertions(+), 104 deletions(-)
diff --git a/drivers/ram/stm32mp1/stm32mp1_ddr.c b/drivers/ram/stm32mp1/stm32mp1_ddr.c index bf3a4c97a4..0457166b12 100644 --- a/drivers/ram/stm32mp1/stm32mp1_ddr.c +++ b/drivers/ram/stm32mp1/stm32mp1_ddr.c @@ -3,6 +3,8 @@ * Copyright (C) 2018, STMicroelectronics - All Rights Reserved */
+#define LOG_CATEGORY UCLASS_RAM + #include <common.h> #include <clk.h> #include <log.h> @@ -311,17 +313,17 @@ static void set_reg(const struct ddr_info *priv, u32 base_addr = get_base_addr(priv, base); const struct reg_desc *desc = ddr_registers[type].desc;
- debug("init %s\n", ddr_registers[type].name); + log_debug("init %s\n", ddr_registers[type].name); for (i = 0; i < ddr_registers[type].size; i++) { ptr = (unsigned int *)(base_addr + desc[i].offset); if (desc[i].par_offset == INVALID_OFFSET) { - pr_err("invalid parameter offset for %s", desc[i].name); + log_err("invalid parameter offset for %s", desc[i].name); } else { value = *((u32 *)((u32)param + desc[i].par_offset)); writel(value, ptr); - debug("[0x%x] %s= 0x%08x\n", - (u32)ptr, desc[i].name, value); + log_debug("[0x%x] %s= 0x%08x\n", + (u32)ptr, desc[i].name, value); } } } @@ -564,16 +566,16 @@ static void ddrphy_idone_wait(struct stm32mp1_ddrphy *phy) DDRPHYC_PGSR_RVERR | DDRPHYC_PGSR_RVEIRR), 1000000); - debug("\n[0x%08x] pgsr = 0x%08x ret=%d\n", - (u32)&phy->pgsr, pgsr, ret); + log_debug("\n[0x%08x] pgsr = 0x%08x ret=%d\n", + (u32)&phy->pgsr, pgsr, ret); }
void stm32mp1_ddrphy_init(struct stm32mp1_ddrphy *phy, u32 pir) { pir |= DDRPHYC_PIR_INIT; writel(pir, &phy->pir); - debug("[0x%08x] pir = 0x%08x -> 0x%08x\n", - (u32)&phy->pir, pir, readl(&phy->pir)); + log_debug("[0x%08x] pir = 0x%08x -> 0x%08x\n", + (u32)&phy->pir, pir, readl(&phy->pir));
/* need to wait 10 configuration clock before start polling */ udelay(10); @@ -603,7 +605,7 @@ static void wait_sw_done_ack(struct stm32mp1_ddrctl *ctl) panic("Timeout initialising DRAM : DDR->swstat = %x\n", swstat);
- debug("[0x%08x] swstat = 0x%08x\n", (u32)&ctl->swstat, swstat); + log_debug("[0x%08x] swstat = 0x%08x\n", (u32)&ctl->swstat, swstat); }
/* wait quasi dynamic register update */ @@ -634,7 +636,7 @@ static void wait_operating_mode(struct ddr_info *priv, int mode) if (ret) panic("Timeout DRAM : DDR->stat = %x\n", stat);
- debug("[0x%08x] stat = 0x%08x\n", (u32)&priv->ctl->stat, stat); + log_debug("[0x%08x] stat = 0x%08x\n", (u32)&priv->ctl->stat, stat); }
void stm32mp1_refresh_disable(struct stm32mp1_ddrctl *ctl) @@ -706,9 +708,9 @@ void stm32mp1_ddr_init(struct ddr_info *priv, panic("ddr power init failed\n");
start: - debug("name = %s\n", config->info.name); - debug("speed = %d kHz\n", config->info.speed); - debug("size = 0x%x\n", config->info.size); + log_debug("name = %s\n", config->info.name); + log_debug("speed = %d kHz\n", config->info.speed); + log_debug("size = 0x%x\n", config->info.size); /* * 1. Program the DWC_ddr_umctl2 registers * 1.1 RESETS: presetn, core_ddrc_rstn, aresetn @@ -745,8 +747,8 @@ start: /* 1.5. initialize registers ddr_umctl2 */ /* Stop uMCTL2 before PHY is ready */ clrbits_le32(&priv->ctl->dfimisc, DDRCTRL_DFIMISC_DFI_INIT_COMPLETE_EN); - debug("[0x%08x] dfimisc = 0x%08x\n", - (u32)&priv->ctl->dfimisc, readl(&priv->ctl->dfimisc)); + log_debug("[0x%08x] dfimisc = 0x%08x\n", + (u32)&priv->ctl->dfimisc, readl(&priv->ctl->dfimisc));
set_reg(priv, REG_REG, &config->c_reg); set_reg(priv, REG_TIMING, &config->c_timing); @@ -809,9 +811,9 @@ start: wait_operating_mode(priv, DDRCTRL_STAT_OPERATING_MODE_NORMAL);
if (config->p_cal_present) { - debug("DDR DQS training skipped.\n"); + log_debug("DDR DQS training skipped.\n"); } else { - debug("DDR DQS training : "); + log_debug("DDR DQS training : "); /* 8. Disable Auto refresh and power down by setting * - RFSHCTL3.dis_au_refresh = 1 * - PWRCTL.powerdown_en = 0 diff --git a/drivers/ram/stm32mp1/stm32mp1_interactive.c b/drivers/ram/stm32mp1/stm32mp1_interactive.c index 5a5d067046..e45a2489c5 100644 --- a/drivers/ram/stm32mp1/stm32mp1_interactive.c +++ b/drivers/ram/stm32mp1/stm32mp1_interactive.c @@ -3,6 +3,8 @@ * Copyright (C) 2019, STMicroelectronics - All Rights Reserved */
+#define LOG_CATEGORY UCLASS_RAM + #include <common.h> #include <command.h> #include <console.h> @@ -404,7 +406,7 @@ bool stm32mp1_ddr_interactive(void *priv, #endif }
- debug("** step %d ** %s / %d\n", step, step_str[step], next_step); + log_debug("** step %d ** %s / %d\n", step, step_str[step], next_step);
if (next_step < 0) return false; diff --git a/drivers/ram/stm32mp1/stm32mp1_ram.c b/drivers/ram/stm32mp1/stm32mp1_ram.c index 9022679703..4c4807bfa6 100644 --- a/drivers/ram/stm32mp1/stm32mp1_ram.c +++ b/drivers/ram/stm32mp1/stm32mp1_ram.c @@ -3,6 +3,8 @@ * Copyright (C) 2018, STMicroelectronics - All Rights Reserved */
+#define LOG_CATEGORY UCLASS_RAM + #include <common.h> #include <clk.h> #include <dm.h> @@ -12,6 +14,7 @@ #include <regmap.h> #include <syscon.h> #include <asm/io.h> +#include <dm/device_compat.h> #include "stm32mp1_ddr.h"
static const char *const clkname[] = { @@ -37,7 +40,7 @@ int stm32mp1_ddr_clk_enable(struct ddr_info *priv, uint32_t mem_speed) ret = clk_enable(&clk);
if (ret) { - printf("error for %s : %d\n", clkname[idx], ret); + log_err("error for %s : %d\n", clkname[idx], ret); return ret; } } @@ -45,13 +48,13 @@ int stm32mp1_ddr_clk_enable(struct ddr_info *priv, uint32_t mem_speed) priv->clk = clk; ddrphy_clk = clk_get_rate(&priv->clk);
- debug("DDR: mem_speed (%d kHz), RCC %d kHz\n", - mem_speed, (u32)(ddrphy_clk / 1000)); + log_debug("DDR: mem_speed (%d kHz), RCC %d kHz\n", + mem_speed, (u32)(ddrphy_clk / 1000)); /* max 10% frequency delta */ ddr_clk = abs(ddrphy_clk - mem_speed * 1000); if (ddr_clk > (mem_speed * 100)) { - pr_err("DDR expected freq %d kHz, current is %d kHz\n", - mem_speed, (u32)(ddrphy_clk / 1000)); + log_err("DDR expected freq %d kHz, current is %d kHz\n", + mem_speed, (u32)(ddrphy_clk / 1000)); return -EINVAL; }
@@ -118,7 +121,7 @@ static __maybe_unused int stm32mp1_ddr_setup(struct udevice *dev) config.info.size = ofnode_read_u32_default(node, "st,mem-size", 0); config.info.name = ofnode_read_string(node, "st,mem-name"); if (!config.info.name) { - debug("%s: no st,mem-name\n", __func__); + dev_dbg(dev, "no st,mem-name\n"); return -EINVAL; } printf("RAM: %s\n", config.info.name); @@ -128,12 +131,12 @@ static __maybe_unused int stm32mp1_ddr_setup(struct udevice *dev) (void *)((u32)&config + param[idx].offset), param[idx].size); - debug("%s: %s[0x%x] = %d\n", __func__, - param[idx].name, param[idx].size, ret); + dev_dbg(dev, "%s: %s[0x%x] = %d\n", __func__, + param[idx].name, param[idx].size, ret); if (ret && (ret != -FDT_ERR_NOTFOUND || !param[idx].present)) { - pr_err("%s: Cannot read %s, error=%d\n", - __func__, param[idx].name, ret); + dev_err(dev, "Cannot read %s, error=%d\n", + param[idx].name, ret); return -EINVAL; } if (param[idx].present) { @@ -153,7 +156,7 @@ static __maybe_unused int stm32mp1_ddr_setup(struct udevice *dev)
ret = clk_get_by_name(dev, "axidcg", &axidcg); if (ret) { - debug("%s: Cannot found axidcg\n", __func__); + dev_dbg(dev, "%s: Cannot found axidcg\n", __func__); return -EINVAL; } clk_disable(&axidcg); /* disable clock gating during init */ @@ -163,13 +166,13 @@ static __maybe_unused int stm32mp1_ddr_setup(struct udevice *dev) clk_enable(&axidcg); /* enable clock gating */
/* check size */ - debug("%s : get_ram_size(%x, %x)\n", __func__, - (u32)priv->info.base, (u32)STM32_DDR_SIZE); + dev_dbg(dev, "get_ram_size(%x, %x)\n", + (u32)priv->info.base, (u32)STM32_DDR_SIZE);
priv->info.size = get_ram_size((long *)priv->info.base, STM32_DDR_SIZE);
- debug("%s : %x\n", __func__, (u32)priv->info.size); + dev_dbg(dev, "info.size: %x\n", (u32)priv->info.size);
/* check memory access for all memory */ if (config.info.size != priv->info.size) { @@ -186,12 +189,11 @@ static int stm32mp1_ddr_probe(struct udevice *dev) struct regmap *map; int ret;
- debug("STM32MP1 DDR probe\n"); priv->dev = dev;
ret = regmap_init_mem(dev_ofnode(dev), &map); if (ret) - return ret; + return log_ret(ret);
priv->ctl = regmap_get_range(map, 0); priv->phy = regmap_get_range(map, 1); @@ -203,7 +205,9 @@ static int stm32mp1_ddr_probe(struct udevice *dev) #if !defined(CONFIG_TFABOOT) && \ (!defined(CONFIG_SPL) || defined(CONFIG_SPL_BUILD)) priv->info.size = 0; - return stm32mp1_ddr_setup(dev); + ret = stm32mp1_ddr_setup(dev); + + return log_ret(ret); #else ofnode node = stm32mp1_ddr_get_ofnode(dev); priv->info.size = ofnode_read_u32_default(node, "st,mem-size", 0); diff --git a/drivers/ram/stm32mp1/stm32mp1_tests.c b/drivers/ram/stm32mp1/stm32mp1_tests.c index 952006aa14..1fcc7cfd69 100644 --- a/drivers/ram/stm32mp1/stm32mp1_tests.c +++ b/drivers/ram/stm32mp1/stm32mp1_tests.c @@ -2,6 +2,9 @@ /* * Copyright (C) 2019, STMicroelectronics - All Rights Reserved */ + +#define LOG_CATEGORY UCLASS_RAM + #include <common.h> #include <console.h> #include <init.h> @@ -197,8 +200,8 @@ static u32 databus(u32 *address)
/* Read it back (immediately is okay for this test). */ read_value = readl(address); - debug("%x: %x <=> %x\n", - (u32)address, read_value, pattern); + log_debug("%x: %x <=> %x\n", + (u32)address, read_value, pattern);
if (read_value != pattern) return pattern; @@ -252,8 +255,8 @@ static u32 *addressbus(u32 *address, u32 nb_bytes)
for (offset = 1; (offset & mask) != 0; offset <<= 1) { read_value = readl(&address[offset]); - debug("%x: %x <=> %x\n", - (u32)&address[offset], read_value, pattern); + log_debug("%x: %x <=> %x\n", + (u32)&address[offset], read_value, pattern); if (read_value != pattern) return &address[offset]; } @@ -363,8 +366,8 @@ static enum test_result databuswalk0(struct stm32mp1_ddrctl *ctl, data = readl(addr + 4 * i); if (~(1 << i) != data) { error |= 1 << i; - debug("%x: error %x expected %x => error:%x\n", - addr + 4 * i, data, ~(1 << i), error); + log_debug("%x: error %x expected %x => error:%x\n", + addr + 4 * i, data, ~(1 << i), error); } } if (test_loop_end(&loop, nb_loop, 1000)) @@ -403,8 +406,8 @@ static enum test_result databuswalk1(struct stm32mp1_ddrctl *ctl, data = readl(addr + 4 * i); if ((1 << i) != data) { error |= 1 << i; - debug("%x: error %x expected %x => error:%x\n", - addr + 4 * i, data, (1 << i), error); + log_debug("%x: error %x expected %x => error:%x\n", + addr + 4 * i, data, (1 << i), error); } } if (test_loop_end(&loop, nb_loop, 1000)) diff --git a/drivers/ram/stm32mp1/stm32mp1_tuning.c b/drivers/ram/stm32mp1/stm32mp1_tuning.c index a8d6892bb0..c8cd7c3cea 100644 --- a/drivers/ram/stm32mp1/stm32mp1_tuning.c +++ b/drivers/ram/stm32mp1/stm32mp1_tuning.c @@ -2,6 +2,9 @@ /* * Copyright (C) 2019, STMicroelectronics - All Rights Reserved */ + +#define LOG_CATEGORY UCLASS_RAM + #include <common.h> #include <console.h> #include <clk.h> @@ -227,8 +230,7 @@ static u8 DQ_unit_index(struct stm32mp1_ddrphy *phy, u8 byte, u8 bit) index = (readl(addr) >> DDRPHYC_DXNDQTR_DQDLY_SHIFT(bit)) & DDRPHYC_DXNDQTR_DQDLY_LOW_MASK;
- pr_debug("%s: [%x]: %x => DQ unit index = %x\n", - __func__, addr, readl(addr), index); + log_debug("[%x]: %x => DQ unit index = %x\n", addr, readl(addr), index);
return index; } @@ -470,13 +472,13 @@ static void apply_deskew_results(struct stm32mp1_ddrphy *phy, u8 byte, for (bit_i = 0; bit_i < 8; bit_i++) { set_DQ_unit_delay(phy, byte, bit_i, deskew_delay[byte][bit_i]); index = DQ_unit_index(phy, byte, bit_i); - pr_debug("Byte %d ; bit %d : The new DQ delay (%d) index=%d [delta=%d, 3 is the default]", - byte, bit_i, deskew_delay[byte][bit_i], - index, index - 3); + log_debug("Byte %d ; bit %d : The new DQ delay (%d) index=%d [delta=%d, 3 is the default]", + byte, bit_i, deskew_delay[byte][bit_i], + index, index - 3); printf("Byte %d, bit %d, DQ delay = %d", byte, bit_i, deskew_delay[byte][bit_i]); if (deskew_non_converge[byte][bit_i] == 1) - pr_debug(" - not converged : still more skew"); + log_debug(" - not converged : still more skew"); printf("\n"); } } @@ -536,7 +538,7 @@ static enum test_result bit_deskew(struct stm32mp1_ddrctl *ctl,
/* Config the BIST block */ config_BIST(ctl, phy); - pr_debug("BIST Config done.\n"); + log_debug("BIST Config done.\n");
/* Train each byte */ for (datx8 = 0; datx8 < nb_bytes; datx8++) { @@ -545,9 +547,9 @@ static enum test_result bit_deskew(struct stm32mp1_ddrctl *ctl, datx8 + 1, nb_bytes, error); return TEST_FAILED; } - pr_debug("\n======================\n"); - pr_debug("Start deskew byte %d .\n", datx8); - pr_debug("======================\n"); + log_debug("\n======================\n"); + log_debug("Start deskew byte %d .\n", datx8); + log_debug("======================\n"); /* Enable Byte (DXNGCR, bit DXEN) */ setbits_le32(DXNGCR(phy, datx8), DDRPHYC_DXNGCR_DXEN);
@@ -584,7 +586,7 @@ static enum test_result bit_deskew(struct stm32mp1_ddrctl *ctl, * Else, look for Pass init condition */ if (!success) { - pr_debug("Fail at init condtion. Let's look for a good init condition.\n"); + log_debug("Fail at init condtion. Let's look for a good init condition.\n"); success = 0; /* init */ /* Make sure we start with a PASS condition before * looking for a fail condition. @@ -592,7 +594,7 @@ static enum test_result bit_deskew(struct stm32mp1_ddrctl *ctl, */
/* escape if we find a PASS */ - pr_debug("increase Phase idx\n"); + log_debug("increase Phase idx\n"); while (!success && (phase_idx <= MAX_DQS_PHASE_IDX)) { DQS_phase_delay(phy, datx8, phase_idx); BIST_test(phy, datx8, &result); @@ -618,7 +620,7 @@ static enum test_result bit_deskew(struct stm32mp1_ddrctl *ctl, * we have hold violation, lets try reduce DQS_unit * Delay */ - pr_debug("Still fail. Try decrease DQS Unit delay\n"); + log_debug("Still fail. Try decrease DQS Unit delay\n");
phase_idx = 0; dqs_unit_delay_index = 0; @@ -665,9 +667,9 @@ static enum test_result bit_deskew(struct stm32mp1_ddrctl *ctl, return TEST_FAILED; }
- pr_debug("there is a pass region for phase idx %d\n", - phase_idx); - pr_debug("Step1: Find the first failing condition\n"); + log_debug("there is a pass region for phase idx %d\n", + phase_idx); + log_debug("Step1: Find the first failing condition\n"); /* Look for the first failing condition by PHASE stepping. * This part of the algo can finish without converging. */ @@ -692,9 +694,9 @@ static enum test_result bit_deskew(struct stm32mp1_ddrctl *ctl, * stepping (minimal delay) */ if (!success) { - pr_debug("Fail region (PHASE) found phase idx %d\n", - phase_idx); - pr_debug("Let's look for first success by DQS Unit steps\n"); + log_debug("Fail region (PHASE) found phase idx %d\n", + phase_idx); + log_debug("Let's look for first success by DQS Unit steps\n"); /* This part, the algo always converge */ phase_idx--;
@@ -721,7 +723,7 @@ static enum test_result bit_deskew(struct stm32mp1_ddrctl *ctl, /*+1 to get back to current condition */ last_right_ok.unit = dqs_unit_delay_index + 1; last_right_ok.bits_delay = 0xFFFFFFFF; - pr_debug("Found %d\n", dqs_unit_delay_index); + log_debug("Found %d\n", dqs_unit_delay_index); } else { /* the last OK condition is then with the * previous phase_idx. @@ -735,8 +737,8 @@ static enum test_result bit_deskew(struct stm32mp1_ddrctl *ctl, */ last_right_ok.unit = 1; last_right_ok.bits_delay = 0xFFFFFFFF; - pr_debug("Not Found : try previous phase %d\n", - phase_idx - 1); + log_debug("Not Found : try previous phase %d\n", + phase_idx - 1);
DQS_phase_delay(phy, datx8, phase_idx - 1); dqs_unit_delay_index = 0; @@ -749,8 +751,8 @@ static enum test_result bit_deskew(struct stm32mp1_ddrctl *ctl, BIST_test(phy, datx8, &result); success = result.test_result; dqs_unit_delay_index++; - pr_debug("dqs_unit_delay_index = %d, result = %d\n", - dqs_unit_delay_index, success); + log_debug("dqs_unit_delay_index = %d, result = %d\n", + dqs_unit_delay_index, success); }
if (!success) { @@ -758,7 +760,7 @@ static enum test_result bit_deskew(struct stm32mp1_ddrctl *ctl, dqs_unit_delay_index - 1; } else { last_right_ok.unit = 0; - pr_debug("ERROR: failed region not FOUND"); + log_debug("ERROR: failed region not FOUND"); } } } else { @@ -775,7 +777,7 @@ static enum test_result bit_deskew(struct stm32mp1_ddrctl *ctl, last_right_ok.phase = MAX_DQS_PHASE_IDX; last_right_ok.unit = MAX_DQS_UNIT_IDX; last_right_ok.bits_delay = 0xFFFFFFFF; - pr_debug("Can't find the a fail condition\n"); + log_debug("Can't find the a fail condition\n"); }
/* step 2: @@ -787,9 +789,9 @@ static enum test_result bit_deskew(struct stm32mp1_ddrctl *ctl, */ printf("Byte %d, DQS unit = %d, phase = %d\n", datx8, last_right_ok.unit, last_right_ok.phase); - pr_debug("Step2, unit = %d, phase = %d, bits delay=%x\n", - last_right_ok.unit, last_right_ok.phase, - last_right_ok.bits_delay); + log_debug("Step2, unit = %d, phase = %d, bits delay=%x\n", + last_right_ok.unit, last_right_ok.phase, + last_right_ok.bits_delay);
/* Restore the last_right_ok condtion. */ DQS_unit_delay(phy, datx8, last_right_ok.unit); @@ -812,7 +814,7 @@ static enum test_result bit_deskew(struct stm32mp1_ddrctl *ctl, datx8 + 1, nb_bytes, error); return error; } - pr_debug("deskewing bit %d:\n", bit_i); + log_debug("deskewing bit %d:\n", bit_i); success = 1; /* init */ /* Set all DQDLYn to maximum value. * Only bit_i will be down-delayed @@ -855,10 +857,10 @@ static enum test_result bit_deskew(struct stm32mp1_ddrctl *ctl, * at one bit. */ fail_found = 1; - pr_debug("Fail found on bit %d, for delay = %d => deskew[%d][%d] = %d\n", - bit_i, bit_i_delay_index + 1, - datx8, bit_i, - deskew_delay[datx8][bit_i]); + log_debug("Fail found on bit %d, for delay = %d => deskew[%d][%d] = %d\n", + bit_i, bit_i_delay_index + 1, + datx8, bit_i, + deskew_delay[datx8][bit_i]); } else { /* if we can find a success condition by * back-delaying this bit, just set the delay @@ -870,20 +872,20 @@ static enum test_result bit_deskew(struct stm32mp1_ddrctl *ctl, * in the report. */ deskew_non_converge[datx8][bit_i] = 1; - pr_debug("Fail not found on bit %d => deskew[%d][%d] = %d\n", - bit_i, datx8, bit_i, - deskew_delay[datx8][bit_i]); + log_debug("Fail not found on bit %d => deskew[%d][%d] = %d\n", + bit_i, datx8, bit_i, + deskew_delay[datx8][bit_i]); } } - pr_debug("**********byte %d tuning complete************\n", - datx8); + log_debug("**********byte %d tuning complete************\n", + datx8); /* If we can't find any failure by back delaying DQ lines, * hold the default values */ if (!fail_found) { for (bit_i = 0; bit_i < 8; bit_i++) deskew_delay[datx8][bit_i] = 0; - pr_debug("The Deskew algorithm can't converge, there is too much margin in your design. Good job!\n"); + log_debug("The Deskew algorithm can't converge, there is too much margin in your design. Good job!\n"); }
apply_deskew_results(phy, datx8, deskew_delay, @@ -986,7 +988,7 @@ static enum test_result eye_training(struct stm32mp1_ddrctl *ctl, dqs_unit_delay_index_pass = dqs_unit_delay_index; success = 0;
- pr_debug("STEP0: Find Init delay\n"); + log_debug("STEP0: Find Init delay\n"); /* STEP0: Find Init delay: a delay that put the system * in a "Pass" condition then (TODO) update * dqs_unit_delay_index_pass & phase_idx_pass @@ -1035,7 +1037,7 @@ static enum test_result eye_training(struct stm32mp1_ddrctl *ctl, byte + 1, nb_bytes, error); return TEST_FAILED; } - pr_debug("STEP1: Find LEFT PHASE DQS Bound\n"); + log_debug("STEP1: Find LEFT PHASE DQS Bound\n"); /* STEP1: Find LEFT PHASE DQS Bound */ while ((phase_idx >= 0) && (phase_idx <= MAX_DQS_PHASE_IDX) && @@ -1069,7 +1071,7 @@ static enum test_result eye_training(struct stm32mp1_ddrctl *ctl, byte + 1, nb_bytes, error); return TEST_FAILED; } - pr_debug("STEP2: Find UNIT left bound\n"); + log_debug("STEP2: Find UNIT left bound\n"); /* STEP2: Find UNIT left bound */ while ((dqs_unit_delay_index >= 0) && !left_unit_bound_found) { @@ -1097,7 +1099,7 @@ static enum test_result eye_training(struct stm32mp1_ddrctl *ctl, byte + 1, nb_bytes, error); return TEST_FAILED; } - pr_debug("STEP3: Find PHase right bound\n"); + log_debug("STEP3: Find PHase right bound\n"); /* STEP3: Find PHase right bound, start with "pass" * condition */ @@ -1135,7 +1137,7 @@ static enum test_result eye_training(struct stm32mp1_ddrctl *ctl, byte + 1, nb_bytes, error); return TEST_FAILED; } - pr_debug("STEP4: Find UNIT right bound\n"); + log_debug("STEP4: Find UNIT right bound\n"); /* STEP4: Find UNIT right bound */ while ((dqs_unit_delay_index <= MAX_DQS_UNIT_IDX) && !right_unit_bound_found) { @@ -1174,12 +1176,12 @@ static enum test_result eye_training(struct stm32mp1_ddrctl *ctl, if (((right_bound.phase + left_bound.phase) % 2 == 1) && eye_training_val[byte][1] != MAX_DQS_UNIT_IDX) eye_training_val[byte][1]++; - pr_debug("** found phase : %d - %d & unit %d - %d\n", - right_bound.phase, left_bound.phase, - right_bound.unit, left_bound.unit); - pr_debug("** calculating mid region: phase: %d unit: %d (nominal is 3)\n", - eye_training_val[byte][0], - eye_training_val[byte][1]); + log_debug("** found phase : %d - %d & unit %d - %d\n", + right_bound.phase, left_bound.phase, + right_bound.unit, left_bound.unit); + log_debug("** calculating mid region: phase: %d unit: %d (nominal is 3)\n", + eye_training_val[byte][0], + eye_training_val[byte][1]); } else { /* PPPPPPPPPP, we're already good. * Set nominal values. @@ -1280,11 +1282,11 @@ static u8 set_midpoint_read_dqs_gating(struct stm32mp1_ddrphy *phy, u8 byte, * or pppppff or ffppppp */ if (left_bound_found || right_bound_found) { - pr_debug("idx0(%d): %d %d idx1(%d) : %d %d\n", - left_bound_found, - right_bound_idx[0], left_bound_idx[0], - right_bound_found, - right_bound_idx[1], left_bound_idx[1]); + log_debug("idx0(%d): %d %d idx1(%d) : %d %d\n", + left_bound_found, + right_bound_idx[0], left_bound_idx[0], + right_bound_found, + right_bound_idx[1], left_bound_idx[1]); dqs_gate_values[byte][0] = (right_bound_idx[0] + left_bound_idx[0]) / 2; dqs_gate_values[byte][1] = @@ -1319,14 +1321,14 @@ static u8 set_midpoint_read_dqs_gating(struct stm32mp1_ddrphy *phy, u8 byte, left_bound_idx[0]; } } - pr_debug("*******calculating mid region: system latency: %d phase: %d********\n", - dqs_gate_values[byte][0], - dqs_gate_values[byte][1]); - pr_debug("*******the nominal values were system latency: 0 phase: 2*******\n"); + log_debug("*******calculating mid region: system latency: %d phase: %d********\n", + dqs_gate_values[byte][0], + dqs_gate_values[byte][1]); + log_debug("*******the nominal values were system latency: 0 phase: 2*******\n"); } } else { /* if intermitant, restore defaut values */ - pr_debug("dqs gating:no regular fail/pass/fail found. defaults values restored.\n"); + log_debug("dqs gating:no regular fail/pass/fail found. defaults values restored.\n"); dqs_gate_values[byte][0] = 0; dqs_gate_values[byte][1] = 2; }