Upstream linux commit fb3bff5b40
This patch enables support to read the ECC strength and size from the NAND flash using Toshiba Memory SLC NAND extended-ID. This patch is based on the information of the 6th ID byte of the Toshiba Memory SLC NAND.
Signed-off-by: Michael Trimarchi michael@amarulasolutions.com --- V1->V2: - use short-commit form - remove linux info. Uboot seems that backport without add this extra information --- drivers/mtd/nand/raw/nand_toshiba.c | 26 ++++++++++++++++++++++++++ 1 file changed, 26 insertions(+)
diff --git a/drivers/mtd/nand/raw/nand_toshiba.c b/drivers/mtd/nand/raw/nand_toshiba.c index 4328e566b0..1adce3ebbd 100644 --- a/drivers/mtd/nand/raw/nand_toshiba.c +++ b/drivers/mtd/nand/raw/nand_toshiba.c @@ -36,6 +36,32 @@ static void toshiba_nand_decode_id(struct nand_chip *chip) (chip->id.data[5] & 0x7) == 0x6 /* 24nm */ && !(chip->id.data[4] & 0x80) /* !BENAND */) mtd->oobsize = 32 * mtd->writesize >> 9; + + /* + * Extract ECC requirements from 6th id byte. + * For Toshiba SLC, ecc requrements are as follows: + * - 43nm: 1 bit ECC for each 512Byte is required. + * - 32nm: 4 bit ECC for each 512Byte is required. + * - 24nm: 8 bit ECC for each 512Byte is required. + */ + if (chip->id.len >= 6 && nand_is_slc(chip)) { + chip->ecc_step_ds = 512; + switch (chip->id.data[5] & 0x7) { + case 0x4: + chip->ecc_strength_ds = 1; + break; + case 0x5: + chip->ecc_strength_ds = 4; + break; + case 0x6: + chip->ecc_strength_ds = 8; + break; + default: + WARN(1, "Could not get ECC info"); + chip->ecc_step_ds = 0; + break; + } + } }
static int toshiba_nand_init(struct nand_chip *chip)