Currently xilinx sdhci driver is using zynqmp_mmio_write() to set tapdelay values. Use xilinx_pm_request() using appropriate arguments to set input/output tapdelays for zynqmp. Where tapdelay setting is done by firmware. Host driver should explicitly request DLL reset before ITAP (assert DLL) and after OTAP (release DLL) to avoid issues in some cases. Also handle error return where possible.
Signed-off-by: T Karthik Reddy t.karthik.reddy@xilinx.com Signed-off-by: Ashok Reddy Soma ashok.reddy.soma@xilinx.com ---
board/xilinx/zynqmp/tap_delays.c | 89 +++----------------------------- drivers/mmc/zynq_sdhci.c | 72 +++++++++++++++++++++----- include/zynqmp_tap_delay.h | 25 ++++++--- 3 files changed, 84 insertions(+), 102 deletions(-)
diff --git a/board/xilinx/zynqmp/tap_delays.c b/board/xilinx/zynqmp/tap_delays.c index d16bbb8eff..4ce2244060 100644 --- a/board/xilinx/zynqmp/tap_delays.c +++ b/board/xilinx/zynqmp/tap_delays.c @@ -10,92 +10,17 @@ #include <asm/arch/sys_proto.h> #include <linux/delay.h> #include <mmc.h> +#include <zynqmp_firmware.h>
-#define SD_DLL_CTRL 0xFF180358 -#define SD_ITAP_DLY 0xFF180314 -#define SD_OTAP_DLY 0xFF180318 -#define SD0_DLL_RST_MASK 0x00000004 -#define SD0_DLL_RST 0x00000004 -#define SD1_DLL_RST_MASK 0x00040000 -#define SD1_DLL_RST 0x00040000 -#define SD0_ITAPCHGWIN_MASK 0x00000200 -#define SD0_ITAPCHGWIN 0x00000200 -#define SD1_ITAPCHGWIN_MASK 0x02000000 -#define SD1_ITAPCHGWIN 0x02000000 -#define SD0_ITAPDLYENA_MASK 0x00000100 -#define SD0_ITAPDLYENA 0x00000100 -#define SD1_ITAPDLYENA_MASK 0x01000000 -#define SD1_ITAPDLYENA 0x01000000 -#define SD0_ITAPDLYSEL_MASK 0x000000FF -#define SD1_ITAPDLYSEL_MASK 0x00FF0000 -#define SD0_OTAPDLYSEL_MASK 0x0000003F -#define SD1_OTAPDLYSEL_MASK 0x003F0000 - -void zynqmp_dll_reset(u8 deviceid) +int arasan_zynqmp_set_in_tapdelay(u8 deviceid, u32 type, u32 itap_delay) { - /* Issue DLL Reset */ - if (deviceid == 0) - zynqmp_mmio_write(SD_DLL_CTRL, SD0_DLL_RST_MASK, - SD0_DLL_RST); - else - zynqmp_mmio_write(SD_DLL_CTRL, SD1_DLL_RST_MASK, - SD1_DLL_RST); - - mdelay(1);
- /* Release DLL Reset */ - if (deviceid == 0) - zynqmp_mmio_write(SD_DLL_CTRL, SD0_DLL_RST_MASK, 0x0); - else - zynqmp_mmio_write(SD_DLL_CTRL, SD1_DLL_RST_MASK, 0x0); + return xilinx_pm_request(PM_IOCTL, (u32)deviceid, IOCTL_SET_SD_TAPDELAY, + type, itap_delay, NULL); }
-void arasan_zynqmp_set_in_tapdelay(u8 deviceid, u32 itap_delay) +int arasan_zynqmp_set_out_tapdelay(u8 deviceid, u32 type, u32 otap_delay) { - if (deviceid == 0) { - zynqmp_mmio_write(SD_DLL_CTRL, SD0_DLL_RST_MASK, SD0_DLL_RST); - - /* Program ITAP delay */ - zynqmp_mmio_write(SD_ITAP_DLY, SD0_ITAPCHGWIN_MASK, - SD0_ITAPCHGWIN); - zynqmp_mmio_write(SD_ITAP_DLY, SD0_ITAPDLYENA_MASK, - SD0_ITAPDLYENA); - zynqmp_mmio_write(SD_ITAP_DLY, SD0_ITAPDLYSEL_MASK, itap_delay); - zynqmp_mmio_write(SD_ITAP_DLY, SD0_ITAPCHGWIN_MASK, 0x0); - - zynqmp_mmio_write(SD_DLL_CTRL, SD0_DLL_RST_MASK, 0x0); - } else { - zynqmp_mmio_write(SD_DLL_CTRL, SD1_DLL_RST_MASK, SD1_DLL_RST); - - /* Program ITAP delay */ - zynqmp_mmio_write(SD_ITAP_DLY, SD1_ITAPCHGWIN_MASK, - SD1_ITAPCHGWIN); - zynqmp_mmio_write(SD_ITAP_DLY, SD1_ITAPDLYENA_MASK, - SD1_ITAPDLYENA); - zynqmp_mmio_write(SD_ITAP_DLY, SD1_ITAPDLYSEL_MASK, - (itap_delay << 16)); - zynqmp_mmio_write(SD_ITAP_DLY, SD1_ITAPCHGWIN_MASK, 0x0); - - zynqmp_mmio_write(SD_DLL_CTRL, SD1_DLL_RST_MASK, 0x0); - } -} - -void arasan_zynqmp_set_out_tapdelay(u8 deviceid, u32 otap_delay) -{ - if (deviceid == 0) { - zynqmp_mmio_write(SD_DLL_CTRL, SD0_DLL_RST_MASK, SD0_DLL_RST); - - /* Program OTAP delay */ - zynqmp_mmio_write(SD_OTAP_DLY, SD0_OTAPDLYSEL_MASK, otap_delay); - - zynqmp_mmio_write(SD_DLL_CTRL, SD0_DLL_RST_MASK, 0x0); - } else { - zynqmp_mmio_write(SD_DLL_CTRL, SD1_DLL_RST_MASK, SD1_DLL_RST); - - /* Program OTAP delay */ - zynqmp_mmio_write(SD_OTAP_DLY, SD1_OTAPDLYSEL_MASK, - (otap_delay << 16)); - - zynqmp_mmio_write(SD_DLL_CTRL, SD1_DLL_RST_MASK, 0x0); - } + return xilinx_pm_request(PM_IOCTL, (u32)deviceid, IOCTL_SET_SD_TAPDELAY, + type, otap_delay, NULL); } diff --git a/drivers/mmc/zynq_sdhci.c b/drivers/mmc/zynq_sdhci.c index 9fb3603c7e..4dafd47b57 100644 --- a/drivers/mmc/zynq_sdhci.c +++ b/drivers/mmc/zynq_sdhci.c @@ -18,6 +18,7 @@ #include <malloc.h> #include <sdhci.h> #include <zynqmp_tap_delay.h> +#include <zynqmp_firmware.h>
#define SDHCI_ARASAN_ITAPDLY_REGISTER 0xF0F8 #define SDHCI_ARASAN_ITAPDLY_SEL_MASK GENMASK(7, 0) @@ -75,26 +76,39 @@ static const u8 mode2timing[] = { [MMC_HS_200] = MMC_TIMING_MMC_HS200, };
-static void arasan_zynqmp_dll_reset(struct sdhci_host *host, u8 deviceid) +static int arasan_zynqmp_dll_reset(struct sdhci_host *host, u8 deviceid) { - u16 clk; + struct mmc *mmc = (struct mmc *)host->mmc; + struct udevice *dev = mmc->dev; unsigned long timeout; + int ret; + u16 clk;
clk = sdhci_readw(host, SDHCI_CLOCK_CONTROL); clk &= ~(SDHCI_CLOCK_CARD_EN); sdhci_writew(host, clk, SDHCI_CLOCK_CONTROL);
/* Issue DLL Reset */ - zynqmp_dll_reset(deviceid); + ret = zynqmp_pm_sd_dll_reset(deviceid, PM_DLL_RESET_ASSERT); + if (ret) { + dev_err(dev, "dll_reset assert failed with err: %d\n", ret); + return ret; + } + + mdelay(1); + ret = zynqmp_pm_sd_dll_reset(deviceid, PM_DLL_RESET_RELEASE); + if (ret) { + dev_err(dev, "dll_reset release failed with err: %d\n", ret); + return ret; + }
/* Wait max 20 ms */ timeout = 100; while (!((clk = sdhci_readw(host, SDHCI_CLOCK_CONTROL)) & SDHCI_CLOCK_INT_STABLE)) { if (timeout == 0) { - dev_err(mmc_dev(host->mmc), - ": Internal clock never stabilised.\n"); - return; + dev_err(dev, ": Internal clock never stabilised.\n"); + return -EBUSY; } timeout--; udelay(1000); @@ -102,6 +116,8 @@ static void arasan_zynqmp_dll_reset(struct sdhci_host *host, u8 deviceid)
clk |= SDHCI_CLOCK_CARD_EN; sdhci_writew(host, clk, SDHCI_CLOCK_CONTROL); + + return 0; }
static int arasan_sdhci_execute_tuning(struct mmc *mmc, u8 opcode) @@ -109,15 +125,14 @@ static int arasan_sdhci_execute_tuning(struct mmc *mmc, u8 opcode) struct mmc_cmd cmd; struct mmc_data data; u32 ctrl; + u8 node_id = mmc->dev->seq_ ? NODE_SD_0 : NODE_SD_1; struct sdhci_host *host; struct arasan_sdhci_priv *priv = dev_get_priv(mmc->dev); char tuning_loop_counter = SDHCI_TUNING_LOOP_COUNT; - u8 deviceid;
debug("%s\n", __func__);
host = priv->host; - deviceid = priv->deviceid;
ctrl = sdhci_readw(host, SDHCI_HOST_CONTROL2); ctrl |= SDHCI_CTRL_EXEC_TUNING; @@ -125,7 +140,7 @@ static int arasan_sdhci_execute_tuning(struct mmc *mmc, u8 opcode)
mdelay(1);
- arasan_zynqmp_dll_reset(host, deviceid); + arasan_zynqmp_dll_reset(host, node_id);
sdhci_writel(host, SDHCI_INT_DATA_AVAIL, SDHCI_INT_ENABLE); sdhci_writel(host, SDHCI_INT_DATA_AVAIL, SDHCI_SIGNAL_ENABLE); @@ -171,7 +186,7 @@ static int arasan_sdhci_execute_tuning(struct mmc *mmc, u8 opcode) }
udelay(1); - arasan_zynqmp_dll_reset(host, deviceid); + arasan_zynqmp_dll_reset(host, node_id);
/* Enable only interrupts served by the SD controller */ sdhci_writel(host, SDHCI_INT_DATA_MASK | SDHCI_INT_CMD_MASK, @@ -194,10 +209,12 @@ static int arasan_sdhci_execute_tuning(struct mmc *mmc, u8 opcode) static int sdhci_zynqmp_sdcardclk_set_phase(struct sdhci_host *host, int degrees) { - struct arasan_sdhci_priv *priv = dev_get_priv(host->mmc->dev); struct mmc *mmc = (struct mmc *)host->mmc; + struct udevice *dev = mmc->dev; + u8 node_id = dev->seq_ ? NODE_SD_0 : NODE_SD_1; u8 tap_delay, tap_max = 0; int timing = mode2timing[mmc->selected_mode]; + int ret;
/* * This is applicable for SDHCI_SPEC_300 and above @@ -233,7 +250,20 @@ static int sdhci_zynqmp_sdcardclk_set_phase(struct sdhci_host *host, /* Limit output tap_delay value to 6 bits */ tap_delay &= SDHCI_ARASAN_OTAPDLY_SEL_MASK;
- arasan_zynqmp_set_out_tapdelay(priv->deviceid, tap_delay); + /* Set the Clock Phase */ + ret = arasan_zynqmp_set_out_tapdelay(node_id, + PM_TAPDELAY_OUTPUT, tap_delay); + if (ret) { + dev_err(dev, "Error setting output Tap Delay\n"); + return ret; + } + + /* Release DLL Reset */ + ret = zynqmp_pm_sd_dll_reset(node_id, PM_DLL_RESET_RELEASE); + if (ret) { + dev_err(dev, "dll_reset release failed with err: %d\n", ret); + return ret; + }
return 0; } @@ -250,10 +280,12 @@ static int sdhci_zynqmp_sdcardclk_set_phase(struct sdhci_host *host, static int sdhci_zynqmp_sampleclk_set_phase(struct sdhci_host *host, int degrees) { - struct arasan_sdhci_priv *priv = dev_get_priv(host->mmc->dev); struct mmc *mmc = (struct mmc *)host->mmc; + struct udevice *dev = mmc->dev; + u8 node_id = dev->seq_ ? NODE_SD_0 : NODE_SD_1; u8 tap_delay, tap_max = 0; int timing = mode2timing[mmc->selected_mode]; + int ret;
/* * This is applicable for SDHCI_SPEC_300 and above @@ -263,6 +295,13 @@ static int sdhci_zynqmp_sampleclk_set_phase(struct sdhci_host *host, if (SDHCI_GET_VERSION(host) < SDHCI_SPEC_300) return 0;
+ /* Assert DLL Reset */ + ret = zynqmp_pm_sd_dll_reset(node_id, PM_DLL_RESET_ASSERT); + if (ret) { + dev_err(dev, "dll_reset assert failed with err: %d\n", ret); + return ret; + } + switch (timing) { case MMC_TIMING_MMC_HS: case MMC_TIMING_SD_HS: @@ -289,7 +328,12 @@ static int sdhci_zynqmp_sampleclk_set_phase(struct sdhci_host *host, /* Limit input tap_delay value to 8 bits */ tap_delay &= SDHCI_ARASAN_ITAPDLY_SEL_MASK;
- arasan_zynqmp_set_in_tapdelay(priv->deviceid, tap_delay); + ret = arasan_zynqmp_set_in_tapdelay(node_id, + PM_TAPDELAY_INPUT, tap_delay); + if (ret) { + dev_err(dev, "Error setting Input Tap Delay\n"); + return ret; + }
return 0; } diff --git a/include/zynqmp_tap_delay.h b/include/zynqmp_tap_delay.h index 1c1e3e7dee..7e4d4e4a9a 100644 --- a/include/zynqmp_tap_delay.h +++ b/include/zynqmp_tap_delay.h @@ -8,14 +8,27 @@ #ifndef __ZYNQMP_TAP_DELAY_H__ #define __ZYNQMP_TAP_DELAY_H__
+#include <zynqmp_firmware.h> + #ifdef CONFIG_ARCH_ZYNQMP -void zynqmp_dll_reset(u8 deviceid); -void arasan_zynqmp_set_in_tapdelay(u8 device_id, u32 itap_delay); -void arasan_zynqmp_set_out_tapdelay(u8 device_id, u32 otap_delay); +int arasan_zynqmp_set_in_tapdelay(u8 device_id, u32 type, u32 itap_delay); +int arasan_zynqmp_set_out_tapdelay(u8 device_id, u32 type, u32 otap_delay); #else -inline void zynqmp_dll_reset(u8 deviceid) {} -inline void arasan_zynqmp_set_in_tapdelay(u8 device_id, u32 itap_delay) {} -inline void arasan_zynqmp_set_out_tapdelay(u8 device_id, u32 otap_delay) {} +inline int arasan_zynqmp_set_in_tapdelay(u8 device_id, u32 type, u32 itap_delay) +{ + return 0; +} + +int arasan_zynqmp_set_out_tapdelay(u8 device_id, u32 type, u32 otap_delay) +{ + return 0; +} #endif
+static inline int zynqmp_pm_sd_dll_reset(u8 node_id, u32 type) +{ + return xilinx_pm_request(PM_IOCTL, (u32)node_id, IOCTL_SD_DLL_RESET, + type, 0, NULL); +} + #endif