Use mmc_pwrseq instead of meson_mmc_pwrseq.
Signed-off-by: Jaehoon Chung jh80.chung@samsung.com --- drivers/mmc/meson_gx_mmc.c | 41 +++----------------------------------- 1 file changed, 3 insertions(+), 38 deletions(-)
diff --git a/drivers/mmc/meson_gx_mmc.c b/drivers/mmc/meson_gx_mmc.c index 8b6dfa3b9603..0ef140562cd2 100644 --- a/drivers/mmc/meson_gx_mmc.c +++ b/drivers/mmc/meson_gx_mmc.c @@ -292,12 +292,11 @@ static int meson_mmc_probe(struct udevice *dev)
mmc_set_clock(mmc, cfg->f_min, MMC_CLK_ENABLE);
-#ifdef CONFIG_PWRSEQ +#ifdef CONFIG_MMC_PWRSEQ /* Enable power if needed */ - ret = uclass_get_device_by_phandle(UCLASS_PWRSEQ, dev, "mmc-pwrseq", - &pwr_dev); + ret = mmc_pwrseq_get_power(dev, cfg); if (!ret) { - ret = pwrseq_set_power(pwr_dev, true); + ret = pwrseq_set_power(cfg->pwr_dev, true); if (ret) return ret; } @@ -342,37 +341,3 @@ U_BOOT_DRIVER(meson_mmc) = { .of_to_plat = meson_mmc_of_to_plat, .plat_auto = sizeof(struct meson_mmc_plat), }; - -#ifdef CONFIG_PWRSEQ -static int meson_mmc_pwrseq_set_power(struct udevice *dev, bool enable) -{ - struct gpio_desc reset; - int ret; - - ret = gpio_request_by_name(dev, "reset-gpios", 0, &reset, GPIOD_IS_OUT); - if (ret) - return ret; - dm_gpio_set_value(&reset, 1); - udelay(1); - dm_gpio_set_value(&reset, 0); - udelay(200); - - return 0; -} - -static const struct pwrseq_ops meson_mmc_pwrseq_ops = { - .set_power = meson_mmc_pwrseq_set_power, -}; - -static const struct udevice_id meson_mmc_pwrseq_ids[] = { - { .compatible = "mmc-pwrseq-emmc" }, - { } -}; - -U_BOOT_DRIVER(meson_mmc_pwrseq_drv) = { - .name = "mmc_pwrseq_emmc", - .id = UCLASS_PWRSEQ, - .of_match = meson_mmc_pwrseq_ids, - .ops = &meson_mmc_pwrseq_ops, -}; -#endif