Hi Stefano
On Fri, May 17, 2019 at 4:52 PM Stefano Babic sbabic@denx.de wrote:
On 14/05/19 22:56, Andrea Scian - DAVE Embedded Systems wrote:
Hi Michael, On 14/05/19 20:44, Michael Nazzareno Trimarchi wrote:
Hi all
On Tue, Jan 29, 2019 at 3:40 PM Andrea Scian andrea.scian@dave.eu wrote:
mxs_nand_command() implementation assume that it's working with a LP NAND, which is a common case nowadays and thus uses two bytes for column address.
However this is wrong for NAND_CMD_READID and NAND_CMD_PARAM, which expects only one byte of column address, even for LP NANDs. This leads to ONFI detection problem with some NAND manufacturer (like Winbond) but not with others (like Samsung and Spansion)
We fix this with a simple workaround to avoid the 2nd byte column address for those two commands.
We have partially tested on imx28 but we have other problem on it. I will give test-by when everything is working correctly
Michael
Also align the code with nand_base to support 16 bit devices.
Tested on an iMX6SX device with:
- Winbond W29N04GVSIAA
- Spansion S34ML04G100TF100
- Samsung K9F4G08U00
Signed-off-by: Andrea Scian andrea.scian@dave.eu CC: Stefano Babic sbabic@denx.de
Is this somenthing that is already addressed?
AFAIK, this is still an open problem on current master This patch has not been integrated and the code is the same as the one that have the original issue
As far as I see on patchwork, patch was not assigned to any maintainer - I have now assigned to Scott (as NAND maintainer).
Stefano
Andrea SCIAN
*DAVE Embedded Systems*
via Talponedo 29/A 33080 Porcia (PN) - Italy Telephone: +39.0434.921215 Telefax: +39.0434.1994030 web: www.dave.eu http://www.dave.eu
Michael
drivers/mtd/nand/raw/mxs_nand_spl.c | 14 +++++++++++++- 1 file changed, 13 insertions(+), 1 deletion(-)
diff --git a/drivers/mtd/nand/raw/mxs_nand_spl.c b/drivers/mtd/nand/raw/mxs_nand_spl.c index 2d7bbe83cc..ad3b7ade64 100644 --- a/drivers/mtd/nand/raw/mxs_nand_spl.c +++ b/drivers/mtd/nand/raw/mxs_nand_spl.c @@ -22,8 +22,20 @@ static void mxs_nand_command(struct mtd_info *mtd, unsigned int command,
/* Serially input address */ if (column != -1) {
/* Adjust columns for 16 bit buswidth */if (chip->options & NAND_BUSWIDTH_16 &&!nand_opcode_8bits(command))column >>= 1; chip->cmd_ctrl(mtd, column, NAND_ALE);
chip->cmd_ctrl(mtd, column >> 8, NAND_ALE);
/** Assume LP NAND here, so use two bytes column address* but not for CMD_READID and CMD_PARAM, which require* only one byte column address*/if (command != NAND_CMD_READID &&command != NAND_CMD_PARAM)chip->cmd_ctrl(mtd, column >> 8, NAND_ALE); } if (page_addr != -1) { chip->cmd_ctrl(mtd, page_addr, NAND_ALE);-- 2.19.2
U-Boot mailing list U-Boot@lists.denx.de https://lists.denx.de/listinfo/u-boot
--
DENX Software Engineering GmbH, Managing Director: Wolfgang Denk HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany Phone: +49-8142-66989-53 Fax: +49-8142-66989-80 Email: sbabic@denx.de =====================================================================