On Wed, Apr 01, 2020 at 12:49:31PM +0530, Amit Singh Tomar wrote:
Devices like uart and clk are needed to be enabled before relocation. this patch adds u-boot.dtsi file that mark these device as dm-pre-reloc.
Reviewed-by: Andre Przywara andre.przywara@arm.com Signed-off-by: Amit Singh Tomar amittomer25@gmail.com
Reviewed-by: Manivannan Sadhasivam manivannan.sadhasivam@linaro.org
Thanks, Mani
Changes since v8: * No changes. Changes since v7: * No changes. Changes since v6: * No changes. Changes since v5: * Added reviwed-by tag. Changes since v4: * Moved it to 08/11 to 06/11. Changes since v3: * Replaced dtsi with dts in subject line along with arm:dts: to the prefix. Changes since v2: * Added License. Changes since v1: * This is newly added file that was *not* present in v1 and contains u-boot specific changes.
arch/arm/dts/s700-u-boot.dtsi | 18 ++++++++++++++++++ 1 file changed, 18 insertions(+) create mode 100644 arch/arm/dts/s700-u-boot.dtsi
diff --git a/arch/arm/dts/s700-u-boot.dtsi b/arch/arm/dts/s700-u-boot.dtsi new file mode 100644 index 0000000..a527ccc --- /dev/null +++ b/arch/arm/dts/s700-u-boot.dtsi @@ -0,0 +1,18 @@ +// SPDX-License-Identifier: GPL-2.0+ +/*
- Copyright (C) 2020 Amit Singh Tomar amittomer25@gmail.com
- */
+/{
- soc {
u-boot,dm-pre-reloc;- };
+};
+&uart3 {
- u-boot,dm-pre-reloc;
+};
+&cmu {
- u-boot,dm-pre-reloc;
+};
2.7.4