The RK3399 SoC needs to know the voltage value provided by some regulators, which is done by setting relevant register bits. Configure these the way other RK3399 boards do, but with the same values as are set in the equivalent code in coreboot.
Signed-off-by: Alper Nebi Yasak alpernebiyasak@gmail.com --- There is a driver for this on Rockchip's repo, I managed to forward-port it and get it working. If that's more desirable than doing it per-board like this I can send that upstream (but I'd prefer to do it after this).
Changes in v2: - Drop unnecessary ifdef. - Clarify commit message regarding 'values set in coreboot'.
board/google/gru/gru.c | 52 ++++++++++++++++++++++++++++++++++++++++++ 1 file changed, 52 insertions(+)
diff --git a/board/google/gru/gru.c b/board/google/gru/gru.c index 23080c1798b7..cbf62a9427c9 100644 --- a/board/google/gru/gru.c +++ b/board/google/gru/gru.c @@ -6,6 +6,17 @@ #include <common.h> #include <dm.h> #include <init.h> +#include <syscon.h> +#include <asm/io.h> +#include <asm/arch-rockchip/clock.h> +#include <asm/arch-rockchip/grf_rk3399.h> +#include <asm/arch-rockchip/hardware.h> +#include <asm/arch-rockchip/misc.h> + +#define GRF_IO_VSEL_BT656_SHIFT 0 +#define GRF_IO_VSEL_AUDIO_SHIFT 1 +#define PMUGRF_CON0_VSEL_SHIFT 8 +#define PMUGRF_CON0_VOL_SHIFT 9
#ifdef CONFIG_SPL_BUILD /* provided to defeat compiler optimisation in board_init_f() */ @@ -54,3 +65,44 @@ int board_early_init_r(void) return 0; } #endif + +static void setup_iodomain(void) +{ + struct rk3399_grf_regs *grf = + syscon_get_first_range(ROCKCHIP_SYSCON_GRF); + struct rk3399_pmugrf_regs *pmugrf = + syscon_get_first_range(ROCKCHIP_SYSCON_PMUGRF); + + /* BT656 and audio is in 1.8v domain */ + rk_setreg(&grf->io_vsel, (1 << GRF_IO_VSEL_BT656_SHIFT | + 1 << GRF_IO_VSEL_AUDIO_SHIFT)); + + /* + * Set GPIO1 1.8v/3.0v source select to PMU1830_VOL + * and explicitly configure that PMU1830_VOL to be 1.8V + */ + rk_setreg(&pmugrf->soc_con0, (1 << PMUGRF_CON0_VSEL_SHIFT | + 1 << PMUGRF_CON0_VOL_SHIFT)); +} + +int misc_init_r(void) +{ + const u32 cpuid_offset = 0x7; + const u32 cpuid_length = 0x10; + u8 cpuid[cpuid_length]; + int ret; + + setup_iodomain(); + + ret = rockchip_cpuid_from_efuse(cpuid_offset, cpuid_length, cpuid); + if (ret) + return ret; + + ret = rockchip_cpuid_set(cpuid, cpuid_length); + if (ret) + return ret; + + ret = rockchip_setup_macaddr(); + + return ret; +}