The ga10h is an 10" tablet with an A33 or A23 soc, 1G RAM, 8G or 16G nand, sdio wifi, 2 micro usb ports, 1 otg and 1 host and 1 micro sd slot.
This commit adds a defconfig for the v1.1 pcb with an a33 soc.
Signed-off-by: Hans de Goede hdegoede@redhat.com --- board/sunxi/MAINTAINERS | 1 + configs/ga10h_v1_1_defconfig | 29 +++++++++++++++++++++++++++++ 2 files changed, 30 insertions(+) create mode 100644 configs/ga10h_v1_1_defconfig
diff --git a/board/sunxi/MAINTAINERS b/board/sunxi/MAINTAINERS index 55febd1..22d560a 100644 --- a/board/sunxi/MAINTAINERS +++ b/board/sunxi/MAINTAINERS @@ -37,6 +37,7 @@ F: configs/Orangepi_mini_defconfig F: configs/qt840a_defconfig F: configs/Wits_Pro_A20_DKT_defconfig F: include/configs/sun8i.h +F: configs/ga10h_v1_1_defconfig F: configs/Ippo_q8h_v1_2_defconfig F: configs/Ippo_q8h_v1_2_a33_1024x600_defconfig F: include/configs/sun9i.h diff --git a/configs/ga10h_v1_1_defconfig b/configs/ga10h_v1_1_defconfig new file mode 100644 index 0000000..c859544 --- /dev/null +++ b/configs/ga10h_v1_1_defconfig @@ -0,0 +1,29 @@ +# The ga10h is an 10" tablet with an A33 or A23 soc, 1G RAM, 8G or 16G nand, +# sdio wifi, 2 micro usb ports, 1 otg and 1 host and 1 micro sd slot. +# +# This defconfig is for the v1.1 pcb with an a33 soc. +CONFIG_SPL=y +CONFIG_SYS_EXTRA_OPTIONS="CONS_INDEX=5" +CONFIG_DEFAULT_DEVICE_TREE="sun8i-a33-ippo-q8h-v1.2-lcd1024x600" +CONFIG_USB_MUSB_SUNXI=y +CONFIG_USB0_VBUS_PIN="AXP0-VBUS-ENABLE" +CONFIG_USB0_VBUS_DET="AXP0-VBUS-DETECT" +CONFIG_AXP_GPIO=y +CONFIG_VIDEO_LCD_MODE="x:1024,y:600,depth:18,pclk_khz:52000,le:138,ri:162,up:22,lo:10,hs:20,vs:3,sync:3,vmode:0" +CONFIG_VIDEO_LCD_PANEL_LVDS=y +CONFIG_VIDEO_LCD_DCLK_PHASE=0 +CONFIG_VIDEO_LCD_POWER="PH7" +CONFIG_VIDEO_LCD_BL_EN="PH6" +CONFIG_VIDEO_LCD_BL_PWM="PH0" +#CONFIG_VIDEO_LCD_BL_PWM_ACTIVE_LOW=n +CONFIG_ARM=y +CONFIG_ARCH_SUNXI=y +CONFIG_MACH_SUN8I_A33=y +CONFIG_DRAM_CLK=432 +# zq = 0x3bbb +CONFIG_DRAM_ZQ=15291 +CONFIG_DRAM_ODT_EN=1 +# Wifi power +CONFIG_AXP221_DLDO1_VOLT=3300 +# aldo1 is connected to VCC-IO, VCC-PD, VCC-USB and VCC-HP +CONFIG_AXP221_ALDO1_VOLT=3000