Hi Peng,
On Thu, Apr 11, 2024 at 12:23 AM Peng Fan (OSS) peng.fan@oss.nxp.com wrote:
From: Peng Fan peng.fan@nxp.com
To i.MX7ULP compatible lpuart, there is only ipg clk, no per clk. So add a devtype check for i.MX7ULP.
Signed-off-by: Peng Fan peng.fan@nxp.com
drivers/serial/serial_lpuart.c | 28 +++++++++++++++++++--------- 1 file changed, 19 insertions(+), 9 deletions(-)
diff --git a/drivers/serial/serial_lpuart.c b/drivers/serial/serial_lpuart.c index ce08a6b4486..891352293f9 100644 --- a/drivers/serial/serial_lpuart.c +++ b/drivers/serial/serial_lpuart.c @@ -111,11 +111,18 @@ u32 __weak get_lpuart_clk(void) #if CONFIG_IS_ENABLED(CLK) static int get_lpuart_clk_rate(struct udevice *dev, u32 *clk) {
struct lpuart_serial_plat *plat = dev_get_plat(dev); struct clk per_clk;
You ignored my previous comment. Here I go again:
Please rename 'per_clk' to 'clk'.
ulong rate; int ret;
char *name;if (plat->devtype == DEV_MX7ULP)name = "ipg";elsename = "per";
ret = clk_get_by_name(dev, "per", &per_clk);
ret = clk_get_by_name(dev, name, &per_clk);
... because it is confusing that per_clk can be ipg or per clock.
if (ret) { dev_err(dev, "Failed to get per clk: %d\n", ret);
And then also change the error message to "clk".