Hi, I got a same problem with release 0.3.0. However, if I use the use same toolchain to compile the 0.2.0 version, it is ok. My compiler version is 2.95.3 (montaVisita). I just modify the "CROSS-COMPILER" parameter. Do I need to change any other parameters ?
Wilson
From: Bogdan Woldert-Jokisz <bwoldert@gi...> Problems with objcopy -O binary 2003-04-10 01:45 hi
When I compile u-boot-0.3.0 then I have the following problem:
ppc_405-ld -g -Ttext 0x40000 -o sched -e sched sched.o libsyscall.a ppc_405-objcopy -O srec sched sched.srec ppc_405-objcopy -O binary hello_world.srec hello_world.bin 2>/dev/null make[1]: *** [hello_world.bin] Error 1 make[1]: Leaving directory `/home/bwoldert/bootloader/u-boot-0.3.0/examples' make: *** [subdirs] Error 1
I found out:
ppc_405-objcopy -O binary hello_world.srec hello_world.bin ppc_405-objcopy: Warning: Output file cannot represent architecture UNKNOWN! ppc_405-objcopy: hello_world.srec: Bad value
When I delete hello_world from the Makefile, then I have the same problem with examples/sched.c. I compile on a i386. What's wrong?
regards Bogdan
From: Wolfgang Denk <wd@de...> Re: Problems with objcopy -O binary 2003-04-10 02:35 In message <LMELLOOANGIAKFIBMEHNGEBECAAA.bwoldert@gi...> you wrote:
I found out:
ppc_405-objcopy -O binary hello_world.srec
hello_world.bin
ppc_405-objcopy: Warning: Output file cannot
represent architecture
UNKNOWN! ppc_405-objcopy: hello_world.srec: Bad value
When I delete hello_world from the Makefile, then I
have the same problem
with examples/sched.c. I compile on a i386. What's
wrong?
Your toolchain is broken. It works fine with our ELDK.
Best regards,
Wolfgang Denk
_________________________________________________________ 我的驕傲(容祖兒)，合久必婚(李克勤)，下一站...天后(Twins)... Yahoo! 鈴聲下載 http://ringtone.yahoo.com.hk