Re: [PATCH] mtd: rawnand: stm32_fmc2: remove unsupported EDO mode

Hi Christophe

On 3/30/23 11:16, Christophe Kerello wrote:

Remove the EDO mode support from as the FMC2 controller does not support the feature.

Signed-off-by: Christophe Kerello christophe.kerello@foss.st.com

drivers/mtd/nand/raw/stm32_fmc2_nand.c | 3 +++ 1 file changed, 3 insertions(+)

diff --git a/drivers/mtd/nand/raw/stm32_fmc2_nand.c b/drivers/mtd/nand/raw/stm32_fmc2_nand.c index fb3279b405e..69dbb629e93 100644 --- a/drivers/mtd/nand/raw/stm32_fmc2_nand.c +++ b/drivers/mtd/nand/raw/stm32_fmc2_nand.c @@ -735,6 +735,9 @@ static int stm32_fmc2_nfc_setup_interface(struct mtd_info *mtd, int chipnr, if (IS_ERR(sdrt)) return PTR_ERR(sdrt);

• if (sdrt->tRC_min < 30000)

• return -EOPNOTSUPP;
  

• if (chipnr == NAND_DATA_IFACE_CHECK_ONLY) return 0;

Reviewed-by: Patrice Chotard patrice.chotard@foss.st.com

Thanks Patrice