Re: [U-Boot] mx25: Remove empty line after printing the reset cause

9 Jan 2015


      On Tue, Jan 06, 2015 at 02:10:05PM -0200, Fabio Estevam wrote:
...
From: Fabio Estevam fabio.estevam@freescale.com
Currently there is an unneeded empty line after printing the reset cause:
U-Boot 2015.01-rc4-00080-g0551a93 (Jan 06 2015 - 13:04:19)
CPU:   Freescale i.MX25 rev1.2 at 399 MHz                                       
Reset cause: POR
Board: MX25PDK                                                                  
I2C:   ready                                                                    
DRAM:  64 MiB                                                                   
MMC:   FSL_SDHC: 0
Remove the extra "\n" when printing the reset cause.
Signed-off-by: Fabio Estevam fabio.estevam@freescale.com
Applied to u-boot/master, thanks!
-- 
Tom

Re: [U-Boot] mx25: Remove empty line after printing the reset cause

Tom Rini