This driver is no longer used, remove it.
Signed-off-by: Marek Vasut marex@denx.de Cc: Albert Aribaud albert.u.boot@aribaud.net --- arch/arm/cpu/arm720t/cpu.c | 1 - arch/arm/cpu/arm720t/interrupts.c | 1 - drivers/serial/Makefile | 1 - drivers/serial/serial_clps7111.c | 121 ---------------- include/clps7111.h | 276 ------------------------------------- 5 files changed, 400 deletions(-) delete mode 100644 drivers/serial/serial_clps7111.c delete mode 100644 include/clps7111.h
diff --git a/arch/arm/cpu/arm720t/cpu.c b/arch/arm/cpu/arm720t/cpu.c index 85c1a2c..2e2f543 100644 --- a/arch/arm/cpu/arm720t/cpu.c +++ b/arch/arm/cpu/arm720t/cpu.c @@ -32,7 +32,6 @@
#include <common.h> #include <command.h> -#include <clps7111.h> #include <asm/hardware.h> #include <asm/system.h>
diff --git a/arch/arm/cpu/arm720t/interrupts.c b/arch/arm/cpu/arm720t/interrupts.c index 998efd8..352d55d 100644 --- a/arch/arm/cpu/arm720t/interrupts.c +++ b/arch/arm/cpu/arm720t/interrupts.c @@ -27,7 +27,6 @@ */
#include <common.h> -#include <clps7111.h> #include <asm/proc-armv/ptrace.h> #include <asm/hardware.h>
diff --git a/drivers/serial/Makefile b/drivers/serial/Makefile index 5f0e714..d1b5a06 100644 --- a/drivers/serial/Makefile +++ b/drivers/serial/Makefile @@ -37,7 +37,6 @@ COBJS-$(CONFIG_SYS_NS16550) += ns16550.o COBJS-$(CONFIG_S3C64XX) += s3c64xx.o COBJS-$(CONFIG_S5P) += serial_s5p.o COBJS-$(CONFIG_SYS_NS16550_SERIAL) += serial.o -COBJS-$(CONFIG_CLPS7111_SERIAL) += serial_clps7111.o COBJS-$(CONFIG_IMX_SERIAL) += serial_imx.o COBJS-$(CONFIG_IXP_SERIAL) += serial_ixp.o COBJS-$(CONFIG_KS8695_SERIAL) += serial_ks8695.o diff --git a/drivers/serial/serial_clps7111.c b/drivers/serial/serial_clps7111.c deleted file mode 100644 index a6aecad..0000000 --- a/drivers/serial/serial_clps7111.c +++ /dev/null @@ -1,121 +0,0 @@ -/* - * (C) Copyright 2002-2004 - * Wolfgang Denk, DENX Software Engineering, wd@denx.de - * - * (C) Copyright 2002 - * Sysgo Real-Time Solutions, GmbH <www.elinos.com> - * Marius Groeger mgroeger@sysgo.de - * - * (C) Copyright 2002 - * Sysgo Real-Time Solutions, GmbH <www.elinos.com> - * Alex Zuepke azu@sysgo.de - * - * Copyright (C) 1999 2000 2001 Erik Mouw (J.A.K.Mouw@its.tudelft.nl) - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA - * - */ - -#include <common.h> -#include <clps7111.h> - -DECLARE_GLOBAL_DATA_PTR; - -void serial_setbrg (void) -{ - unsigned int reg = 0; - - switch (gd->baudrate) { - case 1200: reg = 191; break; - case 9600: reg = 23; break; - case 19200: reg = 11; break; - case 38400: reg = 5; break; - case 57600: reg = 3; break; - case 115200: reg = 1; break; - default: hang (); break; - } - - /* init serial serial 1,2 */ - IO_SYSCON1 = SYSCON1_UART1EN; - IO_SYSCON2 = SYSCON2_UART2EN; - - reg |= UBRLCR_WRDLEN8; - - IO_UBRLCR1 = reg; - IO_UBRLCR2 = reg; -} - - -/* - * Initialise the serial port with the given baudrate. The settings - * are always 8 data bits, no parity, 1 stop bit, no start bits. - * - */ -int serial_init (void) -{ - serial_setbrg (); - - return (0); -} - - -/* - * Output a single byte to the serial port. - */ -void serial_putc (const char c) -{ - int tmo; - - /* If \n, also do \r */ - if (c == '\n') - serial_putc ('\r'); - - tmo = get_timer (0) + 1 * CONFIG_SYS_HZ; - while (IO_SYSFLG1 & SYSFLG1_UTXFF) - if (get_timer (0) > tmo) - break; - - IO_UARTDR1 = c; -} - -/* - * Read a single byte from the serial port. Returns 1 on success, 0 - * otherwise. When the function is succesfull, the character read is - * written into its argument c. - */ -int serial_tstc (void) -{ - return !(IO_SYSFLG1 & SYSFLG1_URXFE); -} - -/* - * Read a single byte from the serial port. Returns 1 on success, 0 - * otherwise. When the function is succesfull, the character read is - * written into its argument c. - */ -int serial_getc (void) -{ - while (IO_SYSFLG1 & SYSFLG1_URXFE); - - return IO_UARTDR1 & 0xff; -} - -void -serial_puts (const char *s) -{ - while (*s) { - serial_putc (*s++); - } -} diff --git a/include/clps7111.h b/include/clps7111.h deleted file mode 100644 index baf6007..0000000 --- a/include/clps7111.h +++ /dev/null @@ -1,276 +0,0 @@ -/* - * linux/include/asm-arm/hardware/clps7111.h - * - * This file contains the hardware definitions of the CLPS7111 internal - * registers. - * - * Copyright (C) 2000 Deep Blue Solutions Ltd. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA - */ -#ifndef __ASM_HARDWARE_CLPS7111_H -#define __ASM_HARDWARE_CLPS7111_H - -#define CLPS7111_PHYS_BASE (0x80000000) - -#ifndef __ASSEMBLY__ -#define clps_readb(off) __raw_readb(CLPS7111_BASE + (off)) -#define clps_readl(off) __raw_readl(CLPS7111_BASE + (off)) -#define clps_writeb(val,off) __raw_writeb(val, CLPS7111_BASE + (off)) -#define clps_writel(val,off) __raw_writel(val, CLPS7111_BASE + (off)) -#endif - -#define PADR (0x0000) -#define PBDR (0x0001) -#define PDDR (0x0003) -#define PADDR (0x0040) -#define PBDDR (0x0041) -#define PDDDR (0x0043) -#define PEDR (0x0080) -#define PEDDR (0x00c0) -#define SYSCON1 (0x0100) -#define SYSFLG1 (0x0140) -#define MEMCFG1 (0x0180) -#define MEMCFG2 (0x01c0) -#define DRFPR (0x0200) -#define INTSR1 (0x0240) -#define INTMR1 (0x0280) -#define LCDCON (0x02c0) -#define TC1D (0x0300) -#define TC2D (0x0340) -#define RTCDR (0x0380) -#define RTCMR (0x03c0) -#define PMPCON (0x0400) -#define CODR (0x0440) -#define UARTDR1 (0x0480) -#define UBRLCR1 (0x04c0) -#define SYNCIO (0x0500) -#define PALLSW (0x0540) -#define PALMSW (0x0580) -#define STFCLR (0x05c0) -#define BLEOI (0x0600) -#define MCEOI (0x0640) -#define TEOI (0x0680) -#define TC1EOI (0x06c0) -#define TC2EOI (0x0700) -#define RTCEOI (0x0740) -#define UMSEOI (0x0780) -#define COEOI (0x07c0) -#define HALT (0x0800) -#define STDBY (0x0840) - -#define FBADDR (0x1000) -#define SYSCON2 (0x1100) -#define SYSFLG2 (0x1140) -#define INTSR2 (0x1240) -#define INTMR2 (0x1280) -#define UARTDR2 (0x1480) -#define UBRLCR2 (0x14c0) -#define SS2DR (0x1500) -#define SRXEOF (0x1600) -#define SS2POP (0x16c0) -#define KBDEOI (0x1700) - -/* common bits: SYSCON1 / SYSCON2 */ -#define SYSCON_UARTEN (1 << 8) - -#define SYSCON1_KBDSCAN(x) ((x) & 15) -#define SYSCON1_KBDSCANMASK (15) -#define SYSCON1_TC1M (1 << 4) -#define SYSCON1_TC1S (1 << 5) -#define SYSCON1_TC2M (1 << 6) -#define SYSCON1_TC2S (1 << 7) -#define SYSCON1_UART1EN SYSCON_UARTEN -#define SYSCON1_BZTOG (1 << 9) -#define SYSCON1_BZMOD (1 << 10) -#define SYSCON1_DBGEN (1 << 11) -#define SYSCON1_LCDEN (1 << 12) -#define SYSCON1_CDENTX (1 << 13) -#define SYSCON1_CDENRX (1 << 14) -#define SYSCON1_SIREN (1 << 15) -#define SYSCON1_ADCKSEL(x) (((x) & 3) << 16) -#define SYSCON1_ADCKSEL_MASK (3 << 16) -#define SYSCON1_EXCKEN (1 << 18) -#define SYSCON1_WAKEDIS (1 << 19) -#define SYSCON1_IRTXM (1 << 20) - -/* common bits: SYSFLG1 / SYSFLG2 */ -#define SYSFLG_UBUSY (1 << 11) -#define SYSFLG_URXFE (1 << 22) -#define SYSFLG_UTXFF (1 << 23) - -#define SYSFLG1_MCDR (1 << 0) -#define SYSFLG1_DCDET (1 << 1) -#define SYSFLG1_WUDR (1 << 2) -#define SYSFLG1_WUON (1 << 3) -#define SYSFLG1_CTS (1 << 8) -#define SYSFLG1_DSR (1 << 9) -#define SYSFLG1_DCD (1 << 10) -#define SYSFLG1_UBUSY SYSFLG_UBUSY -#define SYSFLG1_NBFLG (1 << 12) -#define SYSFLG1_RSTFLG (1 << 13) -#define SYSFLG1_PFFLG (1 << 14) -#define SYSFLG1_CLDFLG (1 << 15) -#define SYSFLG1_URXFE SYSFLG_URXFE -#define SYSFLG1_UTXFF SYSFLG_UTXFF -#define SYSFLG1_CRXFE (1 << 24) -#define SYSFLG1_CTXFF (1 << 25) -#define SYSFLG1_SSIBUSY (1 << 26) -#define SYSFLG1_ID (1 << 29) - -#define SYSFLG2_SSRXOF (1 << 0) -#define SYSFLG2_RESVAL (1 << 1) -#define SYSFLG2_RESFRM (1 << 2) -#define SYSFLG2_SS2RXFE (1 << 3) -#define SYSFLG2_SS2TXFF (1 << 4) -#define SYSFLG2_SS2TXUF (1 << 5) -#define SYSFLG2_CKMODE (1 << 6) -#define SYSFLG2_UBUSY SYSFLG_UBUSY -#define SYSFLG2_URXFE SYSFLG_URXFE -#define SYSFLG2_UTXFF SYSFLG_UTXFF - -#define LCDCON_GSEN (1 << 30) -#define LCDCON_GSMD (1 << 31) - -#define SYSCON2_SERSEL (1 << 0) -#define SYSCON2_KBD6 (1 << 1) -#define SYSCON2_DRAMZ (1 << 2) -#define SYSCON2_KBWEN (1 << 3) -#define SYSCON2_SS2TXEN (1 << 4) -#define SYSCON2_PCCARD1 (1 << 5) -#define SYSCON2_PCCARD2 (1 << 6) -#define SYSCON2_SS2RXEN (1 << 7) -#define SYSCON2_UART2EN SYSCON_UARTEN -#define SYSCON2_SS2MAEN (1 << 9) -#define SYSCON2_OSTB (1 << 12) -#define SYSCON2_CLKENSL (1 << 13) -#define SYSCON2_BUZFREQ (1 << 14) - -/* common bits: UARTDR1 / UARTDR2 */ -#define UARTDR_FRMERR (1 << 8) -#define UARTDR_PARERR (1 << 9) -#define UARTDR_OVERR (1 << 10) - -/* common bits: UBRLCR1 / UBRLCR2 */ -#define UBRLCR_BAUD_MASK ((1 << 12) - 1) -#define UBRLCR_BREAK (1 << 12) -#define UBRLCR_PRTEN (1 << 13) -#define UBRLCR_EVENPRT (1 << 14) -#define UBRLCR_XSTOP (1 << 15) -#define UBRLCR_FIFOEN (1 << 16) -#define UBRLCR_WRDLEN5 (0 << 17) -#define UBRLCR_WRDLEN6 (1 << 17) -#define UBRLCR_WRDLEN7 (2 << 17) -#define UBRLCR_WRDLEN8 (3 << 17) -#define UBRLCR_WRDLEN_MASK (3 << 17) - -#define SYNCIO_SMCKEN (1 << 13) -#define SYNCIO_TXFRMEN (1 << 14) - -#define SYSCON3 0x2200 /* System Control register 3 ----------------------- */ -#define ADCCON 0x00000001 /* ADC configuration */ -#define CLKCTL 0x00000006 /* processor clock control */ -#define CLKCTL_18 0x0 /* 18.432 MHz */ -#define CLKCTL_36 0x2 /* 36.864 MHz */ -#define CLKCTL_49 0x4 /* 49.152 MHz */ -#define CLKCTL_73 0x6 /* 73.728 MHz */ -#define MCPSEL 0x00000008 /* MCP select */ -#define ADCCKNSEN 0x000010 /* ADC clock sense */ -#define VERSN 0x000000e0 /* additional version bits */ -#define VERSN_SHIFT 5 -#define FASTWAKE 0x0000100 /* Wakeup clock select: 0=8Hz, 1=4kHz */ - -#define INTSR3 0x2240 /* Interrupt Status register 3 --------------------- */ -#define MCPINT 0x00000001 /* MCP interface interrupt (FIQ) */ - -#define INTMR3 0x2280 /* Interrupt Mask register 3 ----------------------- */ -#define LEDFLSH 0x22C0 /* LED Flash control register ---------------------- */ -#define LEDFLSH_RATE 0x03 /* flash rate */ -#define LEDFLSH_RATE_SHIFT 0 -#define LEDFLSH_DUTY 0x3c /* duty ratio */ -#define LEDFLSH_DUTY_SHIFT 2 -#define LEDFLSH_ENABLE 0x40 /* enable */ - -#define IO_START CLPS7111_PHYS_BASE - -#define IO(offset) (IO_START + (offset)) - -#define IO_BYTE(offset) (*(volatile unsigned char *)(IO_START + (offset))) -#define IO_WORD(offset) (*(volatile unsigned long *)(IO_START + (offset))) - -#define IO_PADR IO_BYTE(PADR) -#define IO_PBDR IO_BYTE(PBDR) -#define IO_PDDR IO_BYTE(PDDR) -#define IO_PADDR IO_BYTE(PADDR) -#define IO_PBDDR IO_BYTE(PBDDR) -#define IO_PDDDR IO_BYTE(PDDDR) -#define IO_PEDR IO_BYTE(PEDR) -#define IO_PEDDR IO_BYTE(PEDDR) -#define IO_SYSCON IO_WORD(SYSCON) -#define IO_SYSFLG IO_WORD(SYSFLG) -#define IO_MEMCFG1 IO_WORD(MEMCFG1) -#define IO_MEMCFG2 IO_WORD(MEMCFG2) -#define IO_DRFPR IO_WORD(DRFPR) -#define IO_INTSR IO_WORD(INTSR) -#define IO_INTMR IO_WORD(INTMR) -#define IO_LCDCON IO_WORD(LCDCON) -#define IO_TC1D IO_WORD(TC1D) -#define IO_TC2D IO_WORD(TC2D) -#define IO_RTCDR IO_WORD(RTCDR) -#define IO_RTCMR IO_WORD(RTCMR) -#define IO_PMPCON IO_WORD(PMPCON) -#define IO_CODR IO_BYTE(CODR) -#define IO_UARTDR IO_WORD(UARTDR) -#define IO_UBRLCR IO_WORD(UBRLCR) -#define IO_SYNCIO IO_WORD(SYNCIO) -#define IO_PALLSW IO_WORD(PALLSW) -#define IO_PALMSW IO_WORD(PALMSW) -#define IO_STFCLR IO_WORD(STFCLR) -#define IO_BLEOI IO_WORD(BLEOI) -#define IO_MCEOI IO_WORD(MCEOI) -#define IO_TEOI IO_WORD(TEOI) -#define IO_TC1EOI IO_WORD(TC1EOI) -#define IO_TC2EOI IO_WORD(TC2EOI) -#define IO_RTCEOI IO_WORD(RTCEOI) -#define IO_UMSEOI IO_WORD(UMSEOI) -#define IO_COEOI IO_WORD(COEOI) -#define IO_HALT IO_WORD(HALT) -#define IO_STDBY IO_WORD(STDBY) -#define IO_SYSCON1 IO_WORD(SYSCON1) -#define IO_SYSFLG1 IO_WORD(SYSFLG1) -#define IO_INTSR1 IO_WORD(INTSR1) -#define IO_INTMR1 IO_WORD(INTMR1) -#define IO_UARTDR1 IO_WORD(UARTDR1) -#define IO_UBRLCR1 IO_WORD(UBRLCR1) -#define IO_FRBADDR IO_WORD(FRBADDR) -#define IO_SYSCON2 IO_WORD(SYSCON2) -#define IO_SYSFLG2 IO_WORD(SYSFLG2) -#define IO_INTSR2 IO_WORD(INTSR2) -#define IO_INTMR2 IO_WORD(INTMR2) -#define IO_UARTDR2 IO_WORD(UARTDR2) -#define IO_UBRLCR2 IO_WORD(UBRLCR2) -#define IO_KBDEOI IO_WORD(KBDEOI) - -#define IO_MCCR IO_WORD(MCCR) -#define IO_MCDR0 IO_WORD(MCDR0) -#define IO_MCDR1 IO_WORD(MCDR1) -#define IO_MCDR2 IO_WORD(MCDR2) -#define IO_MCSR IO_WORD(MCSR) -#define IO_SYSCON3 IO_WORD(SYSCON3) -#define IO_INTSR3 IO_WORD(INTSR3) -#define IO_INTMR3 IO_WORD(INTMR3) -#define IO_LEDFLSH IO_WORD(LEDFLSH) - -#endif /* __ASM_HARDWARE_CLPS7111_H */