This entry holds the padding between the end of of TPL binary and the end of BSS. This region must be left empty so that the devicetree can be appended correctly and remain accessible without interfering with BSS.
Signed-off-by: Simon Glass sjg@chromium.org ---
tools/binman/README.entries | 22 ++++++++++++ tools/binman/etype/u_boot_tpl_bss_pad.py | 44 ++++++++++++++++++++++++ tools/binman/ftest.py | 16 +++++++++ tools/binman/test/193_tpl_bss_pad.dts | 19 ++++++++++ 4 files changed, 101 insertions(+) create mode 100644 tools/binman/etype/u_boot_tpl_bss_pad.py create mode 100644 tools/binman/test/193_tpl_bss_pad.dts
diff --git a/tools/binman/README.entries b/tools/binman/README.entries index 253c579a62d..cd15073e6df 100644 --- a/tools/binman/README.entries +++ b/tools/binman/README.entries @@ -1047,6 +1047,28 @@ binman uses that to look up symbols to write into the TPL binary.
+Entry: u-boot-tpl-bss-pad: U-Boot TPL binary padded with a BSS region +--------------------------------------------------------------------- + +Properties / Entry arguments: + None + +This holds the padding added after the TPL binary to cover the BSS (Block +Started by Symbol) region. This region holds the various variables used by +TPL. It is set to 0 by TPL when it starts up. If you want to append data to +the TPL image (such as a device tree file), you must pad out the BSS region +to avoid the data overlapping with U-Boot variables. This entry is useful in +that case. It automatically pads out the entry size to cover both the code, +data and BSS. + +The contents of this entry will a certain number of zero bytes, determined +by __bss_size + +The ELF file 'tpl/u-boot-tpl' must also be available for this to work, since +binman uses that to look up the BSS address. + + + Entry: u-boot-tpl-dtb: U-Boot TPL device tree ---------------------------------------------
diff --git a/tools/binman/etype/u_boot_tpl_bss_pad.py b/tools/binman/etype/u_boot_tpl_bss_pad.py new file mode 100644 index 00000000000..521b24a384e --- /dev/null +++ b/tools/binman/etype/u_boot_tpl_bss_pad.py @@ -0,0 +1,44 @@ +# SPDX-License-Identifier: GPL-2.0+ +# Copyright 2021 Google LLC +# Written by Simon Glass sjg@chromium.org +# +# Entry-type module for BSS padding for tpl/u-boot-tpl.bin. This padding +# can be added after the TPL binary to ensure that anything concatenated +# to it will appear to TPL to be at the end of BSS rather than the start. +# + +from binman import elf +from binman.entry import Entry +from binman.etype.blob import Entry_blob +from patman import tools + +class Entry_u_boot_tpl_bss_pad(Entry_blob): + """U-Boot TPL binary padded with a BSS region + + Properties / Entry arguments: + None + + This holds the padding added after the TPL binary to cover the BSS (Block + Started by Symbol) region. This region holds the various variables used by + TPL. It is set to 0 by TPL when it starts up. If you want to append data to + the TPL image (such as a device tree file), you must pad out the BSS region + to avoid the data overlapping with U-Boot variables. This entry is useful in + that case. It automatically pads out the entry size to cover both the code, + data and BSS. + + The contents of this entry will a certain number of zero bytes, determined + by __bss_size + + The ELF file 'tpl/u-boot-tpl' must also be available for this to work, since + binman uses that to look up the BSS address. + """ + def __init__(self, section, etype, node): + super().__init__(section, etype, node) + + def ObtainContents(self): + fname = tools.GetInputFilename('tpl/u-boot-tpl') + bss_size = elf.GetSymbolAddress(fname, '__bss_size') + if not bss_size: + self.Raise('Expected __bss_size symbol in tpl/u-boot-tpl') + self.SetContents(tools.GetBytes(0, bss_size)) + return True diff --git a/tools/binman/ftest.py b/tools/binman/ftest.py index b989dd46caf..10edeab8784 100644 --- a/tools/binman/ftest.py +++ b/tools/binman/ftest.py @@ -4251,6 +4251,22 @@ class TestFunctional(unittest.TestCase): self.assertEqual(U_BOOT_TPL_NODTB_DATA, data[:len(U_BOOT_TPL_NODTB_DATA)])
+ def testTplBssPad(self): + """Test that we can pad TPL's BSS with zeros""" + # ELF file with a '__bss_size' symbol + self._SetupTplElf() + data = self._DoReadFile('193_tpl_bss_pad.dts') + self.assertEqual(U_BOOT_TPL_DATA + tools.GetBytes(0, 10) + U_BOOT_DATA, + data) + + def testTplBssPadMissing(self): + """Test that a missing symbol is detected""" + self._SetupTplElf('u_boot_ucode_ptr') + with self.assertRaises(ValueError) as e: + self._DoReadFile('193_tpl_bss_pad.dts') + self.assertIn('Expected __bss_size symbol in tpl/u-boot-tpl', + str(e.exception)) +
if __name__ == "__main__": unittest.main() diff --git a/tools/binman/test/193_tpl_bss_pad.dts b/tools/binman/test/193_tpl_bss_pad.dts new file mode 100644 index 00000000000..f5c2db0646c --- /dev/null +++ b/tools/binman/test/193_tpl_bss_pad.dts @@ -0,0 +1,19 @@ +// SPDX-License-Identifier: GPL-2.0+ + +/dts-v1/; + +/ { + #address-cells = <1>; + #size-cells = <1>; + + binman { + u-boot-tpl { + }; + + u-boot-tpl-bss-pad { + }; + + u-boot { + }; + }; +};