Convert these boards to use a text environment.
For the boards check, the only differences are extra spaces after the semicolons in 'dfu_alt_info_ram' and 'partitions', both of which are permitted.
Add in the special boot command for old kernels, dropping the unnecessary and confusing hex prefixes.
Signed-off-by: Simon Glass sjg@chromium.org ---
Changes in v4: - Drop UUID_GPT_SYSTEM and UUID_GPT_ESP definitions - Drop special case for ARM64's devicetree subdir - Drop unwanted quotations and indentation in KERNEL_COMPAT path
Changes in v2: - Keep bootcmd_sunxi_compat if OLD_SUNXI_KERNEL_COMPAT is enabled
board/sunxi/sunxi.env | 140 ++++++++++++++++++++++++++++ include/configs/sunxi-common.h | 165 --------------------------------- 2 files changed, 140 insertions(+), 165 deletions(-) create mode 100644 board/sunxi/sunxi.env
diff --git a/board/sunxi/sunxi.env b/board/sunxi/sunxi.env new file mode 100644 index 00000000000..ec6e07c228f --- /dev/null +++ b/board/sunxi/sunxi.env @@ -0,0 +1,140 @@ +// SPDX-License-Identifier: GPL-2.0+ +/* + * Common sunxi environment + * + * Copyright 2024 Google LLC + * Written by Simon Glass sjg@chromium.org + / + +/**************************************************************************** + * environment variables holding default load addresses * + ****************************************************************************/ +/* + * We cannot use expressions here, because expressions won't be evaluated in + * autoconf.mk. + */ +#ifdef CONFIG_ARM64 +/* + * Boards seem to come with at least 512MB of DRAM. + * The kernel should go at 512K, which is the default text offset (that will + * be adjusted at runtime if needed). + * There is no compression for arm64 kernels (yet), so leave some space + * for really big kernels, say 256MB for now. + * Scripts, PXE and DTBs should go afterwards, leaving the rest for the initrd. + */ +#define BOOTM_SIZE 0xa000000 +#define KERNEL_ADDR_R SDRAM_OFFSET(0080000) +#define KERNEL_COMP_ADDR_R SDRAM_OFFSET(4000000) +#define KERNEL_COMP_SIZE 0xb000000 +#define FDT_ADDR_R SDRAM_OFFSET(FA00000) +#define SCRIPT_ADDR_R SDRAM_OFFSET(FC00000) +#define PXEFILE_ADDR_R SDRAM_OFFSET(FD00000) +#define FDTOVERLAY_ADDR_R SDRAM_OFFSET(FE00000) +#define RAMDISK_ADDR_R SDRAM_OFFSET(FF00000) + +#elif (CONFIG_SUNXI_MINIMUM_DRAM_MB >= 256) +/* + * 160M RAM (256M minimum minus 64MB heap + 32MB for u-boot, stack, fb, etc. + * 32M uncompressed kernel, 16M compressed kernel, 1M fdt, + * 1M script, 1M pxe, 1M dt overlay and the ramdisk at the end. + */ +#define BOOTM_SIZE 0xa000000 +#define KERNEL_ADDR_R SDRAM_OFFSET(2000000) +#define FDT_ADDR_R SDRAM_OFFSET(3000000) +#define SCRIPT_ADDR_R SDRAM_OFFSET(3100000) +#define PXEFILE_ADDR_R SDRAM_OFFSET(3200000) +#define FDTOVERLAY_ADDR_R SDRAM_OFFSET(3300000) +#define RAMDISK_ADDR_R SDRAM_OFFSET(3400000) + +#elif (CONFIG_SUNXI_MINIMUM_DRAM_MB >= 64) +/* + * 64M RAM minus 2MB heap + 16MB for u-boot, stack, fb, etc. + * 16M uncompressed kernel, 8M compressed kernel, 1M fdt, + * 1M script, 1M pxe, 1M dt overlay and the ramdisk at the end. + */ +#define BOOTM_SIZE 0x2e00000 +#define KERNEL_ADDR_R SDRAM_OFFSET(1000000) +#define FDT_ADDR_R SDRAM_OFFSET(1800000) +#define SCRIPT_ADDR_R SDRAM_OFFSET(1900000) +#define PXEFILE_ADDR_R SDRAM_OFFSET(1A00000) +#define FDTOVERLAY_ADDR_R SDRAM_OFFSET(1B00000) +#define RAMDISK_ADDR_R SDRAM_OFFSET(1C00000) + +#elif (CONFIG_SUNXI_MINIMUM_DRAM_MB >= 32) +/* + * 32M RAM minus 2.5MB for u-boot, heap, stack, etc. + * 16M uncompressed kernel, 7M compressed kernel, 128K fdt, 64K script, + * 128K DT overlay, 128K PXE and the ramdisk in the rest (max. 5MB) + */ +#define BOOTM_SIZE 0x1700000 +#define KERNEL_ADDR_R SDRAM_OFFSET(1000000) +#define FDT_ADDR_R SDRAM_OFFSET(1d50000) +#define SCRIPT_ADDR_R SDRAM_OFFSET(1d40000) +#define PXEFILE_ADDR_R SDRAM_OFFSET(1d00000) +#define FDTOVERLAY_ADDR_R SDRAM_OFFSET(1d20000) +#define RAMDISK_ADDR_R SDRAM_OFFSET(1800000) + +#else +#error Need at least 32MB of DRAM. Please adjust load addresses. +#endif + +stdin=serial +#ifdef CONFIG_USB_KEYBOARD +stdin+=,usbkbd +#endif + +stdout=serial +stderr=serial +#ifdef CONFIG_VIDEO +stdout+=,vidconsole +stderr+=,vidconsole +#endif + +bootm_size=BOOTM_SIZE +kernel_addr_r=KERNEL_ADDR_R +fdt_addr_r=FDT_ADDR_R +scriptaddr=SCRIPT_ADDR_R +pxefile_addr_r=PXEFILE_ADDR_R +fdtoverlay_addr_r=FDTOVERLAY_ADDR_R +ramdisk_addr_r=RAMDISK_ADDR_R + +#ifdef CONFIG_ARM64 +kernel_comp_addr_r=KERNEL_COMP_ADDR_R +kernel_comp_size=KERNEL_COMP_SIZE +#endif + +dfu_alt_info_ram= + kernel ram KERNEL_ADDR_R 0x1000000; + fdt ram FDT_ADDR_R 0x100000; + ramdisk ram RAMDISK_ADDR_R 0x4000000 + +fdtfile=DEFAULT_DEVICE_TREE.dtb + +console=ttyS0,115200 + +uuid_gpt_esp=c12a7328-f81f-11d2-ba4b-00a0c93ec93b +#ifdef CONFIG_ARM64 +uuid_gpt_system=b921b045-1df0-41c3-af44-4c6f280d3fae +#else +uuid_gpt_system=69dad710-2ce4-4e3c-b16c-21a1d49abed3 +#endif + +partitions= + name=loader1,start=8k,size=32k,uuid=${uuid_gpt_loader1}; + name=loader2,size=984k,uuid=${uuid_gpt_loader2}; + name=esp,size=128M,bootable,uuid=${uuid_gpt_esp}; + name=system,size=-,uuid=${uuid_gpt_system}; + +/* support booting a very old kernel */ +#ifdef CONFIG_OLD_SUNXI_KERNEL_COMPAT +bootcmd_sunxi_compat= + setenv root /dev/mmcblk0p3 rootwait; + if ext2load mmc 0 44000000 uEnv.txt; then + echo Loaded environment from uEnv.txt; + env import -t 44000000 ${filesize}; + fi; + setenv bootargs console=${console} root=${root} ${extraargs}; + ext2load mmc 0 43000000 script.bin && + ext2load mmc 0 48000000 uImage && + bootm 48000000 +#endif diff --git a/include/configs/sunxi-common.h b/include/configs/sunxi-common.h index 666553ccadb..ceea26494ad 100644 --- a/include/configs/sunxi-common.h +++ b/include/configs/sunxi-common.h @@ -61,169 +61,4 @@ #define PHYS_SDRAM_0 CFG_SYS_SDRAM_BASE #define PHYS_SDRAM_0_SIZE 0x80000000 /* 2 GiB */
-/**************************************************************************** - * environment variables holding default load addresses * - ****************************************************************************/ -/* - * We cannot use expressions here, because expressions won't be evaluated in - * autoconf.mk. - */ -#ifdef CONFIG_ARM64 -/* - * Boards seem to come with at least 512MB of DRAM. - * The kernel should go at 512K, which is the default text offset (that will - * be adjusted at runtime if needed). - * There is no compression for arm64 kernels (yet), so leave some space - * for really big kernels, say 256MB for now. - * Scripts, PXE and DTBs should go afterwards, leaving the rest for the initrd. - */ -#define BOOTM_SIZE __stringify(0xa000000) -#define KERNEL_ADDR_R __stringify(SDRAM_OFFSET(0080000)) -#define KERNEL_COMP_ADDR_R __stringify(SDRAM_OFFSET(4000000)) -#define KERNEL_COMP_SIZE __stringify(0xb000000) -#define FDT_ADDR_R __stringify(SDRAM_OFFSET(FA00000)) -#define SCRIPT_ADDR_R __stringify(SDRAM_OFFSET(FC00000)) -#define PXEFILE_ADDR_R __stringify(SDRAM_OFFSET(FD00000)) -#define FDTOVERLAY_ADDR_R __stringify(SDRAM_OFFSET(FE00000)) -#define RAMDISK_ADDR_R __stringify(SDRAM_OFFSET(FF00000)) - -#elif (CONFIG_SUNXI_MINIMUM_DRAM_MB >= 256) -/* - * 160M RAM (256M minimum minus 64MB heap + 32MB for u-boot, stack, fb, etc. - * 32M uncompressed kernel, 16M compressed kernel, 1M fdt, - * 1M script, 1M pxe, 1M dt overlay and the ramdisk at the end. - */ -#define BOOTM_SIZE __stringify(0xa000000) -#define KERNEL_ADDR_R __stringify(SDRAM_OFFSET(2000000)) -#define FDT_ADDR_R __stringify(SDRAM_OFFSET(3000000)) -#define SCRIPT_ADDR_R __stringify(SDRAM_OFFSET(3100000)) -#define PXEFILE_ADDR_R __stringify(SDRAM_OFFSET(3200000)) -#define FDTOVERLAY_ADDR_R __stringify(SDRAM_OFFSET(3300000)) -#define RAMDISK_ADDR_R __stringify(SDRAM_OFFSET(3400000)) - -#elif (CONFIG_SUNXI_MINIMUM_DRAM_MB >= 64) -/* - * 64M RAM minus 2MB heap + 16MB for u-boot, stack, fb, etc. - * 16M uncompressed kernel, 8M compressed kernel, 1M fdt, - * 1M script, 1M pxe, 1M dt overlay and the ramdisk at the end. - */ -#define BOOTM_SIZE __stringify(0x2e00000) -#define KERNEL_ADDR_R __stringify(SDRAM_OFFSET(1000000)) -#define FDT_ADDR_R __stringify(SDRAM_OFFSET(1800000)) -#define SCRIPT_ADDR_R __stringify(SDRAM_OFFSET(1900000)) -#define PXEFILE_ADDR_R __stringify(SDRAM_OFFSET(1A00000)) -#define FDTOVERLAY_ADDR_R __stringify(SDRAM_OFFSET(1B00000)) -#define RAMDISK_ADDR_R __stringify(SDRAM_OFFSET(1C00000)) - -#elif (CONFIG_SUNXI_MINIMUM_DRAM_MB >= 32) -/* - * 32M RAM minus 2.5MB for u-boot, heap, stack, etc. - * 16M uncompressed kernel, 7M compressed kernel, 128K fdt, 64K script, - * 128K DT overlay, 128K PXE and the ramdisk in the rest (max. 5MB) - */ -#define BOOTM_SIZE __stringify(0x1700000) -#define KERNEL_ADDR_R __stringify(SDRAM_OFFSET(1000000)) -#define FDT_ADDR_R __stringify(SDRAM_OFFSET(1d50000)) -#define SCRIPT_ADDR_R __stringify(SDRAM_OFFSET(1d40000)) -#define PXEFILE_ADDR_R __stringify(SDRAM_OFFSET(1d00000)) -#define FDTOVERLAY_ADDR_R __stringify(SDRAM_OFFSET(1d20000)) -#define RAMDISK_ADDR_R __stringify(SDRAM_OFFSET(1800000)) - -#else -#error Need at least 32MB of DRAM. Please adjust load addresses. -#endif - -#define MEM_LAYOUT_ENV_SETTINGS \ - "bootm_size=" BOOTM_SIZE "\0" \ - "kernel_addr_r=" KERNEL_ADDR_R "\0" \ - "fdt_addr_r=" FDT_ADDR_R "\0" \ - "scriptaddr=" SCRIPT_ADDR_R "\0" \ - "pxefile_addr_r=" PXEFILE_ADDR_R "\0" \ - "fdtoverlay_addr_r=" FDTOVERLAY_ADDR_R "\0" \ - "ramdisk_addr_r=" RAMDISK_ADDR_R "\0" - -#ifdef CONFIG_ARM64 -#define MEM_LAYOUT_ENV_EXTRA_SETTINGS \ - "kernel_comp_addr_r=" KERNEL_COMP_ADDR_R "\0" \ - "kernel_comp_size=" KERNEL_COMP_SIZE "\0" -#else -#define MEM_LAYOUT_ENV_EXTRA_SETTINGS "" -#endif - -#define DFU_ALT_INFO_RAM \ - "dfu_alt_info_ram=" \ - "kernel ram " KERNEL_ADDR_R " 0x1000000;" \ - "fdt ram " FDT_ADDR_R " 0x100000;" \ - "ramdisk ram " RAMDISK_ADDR_R " 0x4000000\0" - -#ifdef CONFIG_OLD_SUNXI_KERNEL_COMPAT -#define BOOTCMD_SUNXI_COMPAT \ - "bootcmd_sunxi_compat=" \ - "setenv root /dev/mmcblk0p3 rootwait; " \ - "if ext2load mmc 0 0x44000000 uEnv.txt; then " \ - "echo Loaded environment from uEnv.txt; " \ - "env import -t 0x44000000 ${filesize}; " \ - "fi; " \ - "setenv bootargs console=${console} root=${root} ${extraargs}; " \ - "ext2load mmc 0 0x43000000 script.bin && " \ - "ext2load mmc 0 0x48000000 uImage && " \ - "bootm 0x48000000\0" -#else -#define BOOTCMD_SUNXI_COMPAT -#endif - -#ifdef CONFIG_USB_KEYBOARD -#define CONSOLE_STDIN_SETTINGS \ - "stdin=serial,usbkbd\0" -#else -#define CONSOLE_STDIN_SETTINGS \ - "stdin=serial\0" -#endif - -#ifdef CONFIG_VIDEO -#define CONSOLE_STDOUT_SETTINGS \ - "stdout=serial,vidconsole\0" \ - "stderr=serial,vidconsole\0" -#else -#define CONSOLE_STDOUT_SETTINGS \ - "stdout=serial\0" \ - "stderr=serial\0" -#endif - -#define PARTS_DEFAULT \ - "name=loader1,start=8k,size=32k,uuid=${uuid_gpt_loader1};" \ - "name=loader2,size=984k,uuid=${uuid_gpt_loader2};" \ - "name=esp,size=128M,bootable,uuid=${uuid_gpt_esp};" \ - "name=system,size=-,uuid=${uuid_gpt_system};" - -#define UUID_GPT_ESP "c12a7328-f81f-11d2-ba4b-00a0c93ec93b" - -#ifdef CONFIG_ARM64 -#define UUID_GPT_SYSTEM "b921b045-1df0-41c3-af44-4c6f280d3fae" -#else -#define UUID_GPT_SYSTEM "69dad710-2ce4-4e3c-b16c-21a1d49abed3" -#endif - -#define CONSOLE_ENV_SETTINGS \ - CONSOLE_STDIN_SETTINGS \ - CONSOLE_STDOUT_SETTINGS - -#ifdef CONFIG_ARM64 -#define FDTFILE "allwinner/" CONFIG_DEFAULT_DEVICE_TREE ".dtb" -#else -#define FDTFILE CONFIG_DEFAULT_DEVICE_TREE ".dtb" -#endif - -#define CFG_EXTRA_ENV_SETTINGS \ - CONSOLE_ENV_SETTINGS \ - MEM_LAYOUT_ENV_SETTINGS \ - MEM_LAYOUT_ENV_EXTRA_SETTINGS \ - DFU_ALT_INFO_RAM \ - "fdtfile=" FDTFILE "\0" \ - "console=ttyS0,115200\0" \ - "uuid_gpt_esp=" UUID_GPT_ESP "\0" \ - "uuid_gpt_system=" UUID_GPT_SYSTEM "\0" \ - "partitions=" PARTS_DEFAULT "\0" \ - BOOTCMD_SUNXI_COMPAT - #endif /* _SUNXI_COMMON_CONFIG_H */