Hi everyone,
This series add some missing peripheral support and fixed that was implemented on U-Boot 2013.01 Marvell version: 2015_T1.0p16 - helios4: Update Load address - helios4: mmc: move environment before 1M - helios4: Enable I2C - helios4: Reset uSOM onboard phy during board init
and added new peripheral support and improvement - helios4: Enable mvebu GPIO and IO Expander - helios4: Enable SPI flash support - helios4: Reduce U-Boot image size
--- Aditya Prayoga (7): arm: mvebu: helios4: Update Load address arm: mvebu: helios4: mmc: move environment before 1M arm: mvebu: helios4: Enable I2C arm: mvebu: helios4: Enable mvebu GPIO and IO Expander arm: mvebu: helios4: Reduce U-Boot image size arm: mvebu: helios4: Enable SPI flash support arm: mvebu: helios4: Reset uSOM onboard phy during board init
arch/arm/dts/armada-388-helios4.dts | 9 ++++++ board/kobol/helios4/helios4.c | 37 ++++------------------- configs/helios4_defconfig | 13 +++++---- include/configs/helios4.h | 58 +++++++++++++++++++++++++------------ 4 files changed, 62 insertions(+), 55 deletions(-)