This commit adjusts the autoboot.cmd file to use ${mmcbootdev} instead of hardcoded value 0.
This is necessary to allow booting this board from the SD card.
Signed-off-by: Lukasz Majewski lukma@denx.de Tested-by: Anand Moon linux.amoon@gmail.com
---
Changes in v2: - Add tested-by - Rebase on the newest main line
board/samsung/common/bootscripts/autoboot.cmd | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-)
diff --git a/board/samsung/common/bootscripts/autoboot.cmd b/board/samsung/common/bootscripts/autoboot.cmd index 1faed8ba0c1a..11c724c4e095 100644 --- a/board/samsung/common/bootscripts/autoboot.cmd +++ b/board/samsung/common/bootscripts/autoboot.cmd @@ -74,15 +74,15 @@ setenv boot_img "
#### Routine: autoboot - choose proper boot path setenv autoboot " -if test -e mmc 0:${mmcbootpart} Image.itb; then +if test -e mmc ${mmcbootdev}:${mmcbootpart} Image.itb; then echo Found kernel image: Image.itb; run setboot_fit; run boot_img; -elif test -e mmc 0:${mmcbootpart} zImage; then +elif test -e mmc ${mmcbootdev}:${mmcbootpart} zImage; then echo Found kernel image: zImage; run setboot_zimg; run boot_img; -elif test -e mmc 0:${mmcbootpart} uImage; then +elif test -e mmc ${mmcbootdev}:${mmcbootpart} uImage; then echo Found kernel image: uImage; run setboot_uimg; run boot_img;