-----Original Message----- From: joel.stan@gmail.com joel.stan@gmail.com On Behalf Of Joel Stanley Sent: Monday, June 20, 2022 3:25 PM To: Ryan Chen ryan_chen@aspeedtech.com; BMC-SW BMC-SW@aspeedtech.com; Heiko Schocher hs@denx.de Cc: u-boot@lists.denx.de; Cédric Le Goater clg@kaod.org Subject: [PATCH 03/10] ARM: dts: ast2600: Dsiable I2C nodes by default
Allow boards to enable the buses they use.
Signed-off-by: Joel Stanley joel@jms.id.au
Reviewed-by: Ryan Chen ryan_chen@aspeedtech.com
arch/arm/dts/ast2600.dtsi | 7 +++++++ 1 file changed, 7 insertions(+)
diff --git a/arch/arm/dts/ast2600.dtsi b/arch/arm/dts/ast2600.dtsi index 4b23d25ede0a..a37d062bcad7 100644 --- a/arch/arm/dts/ast2600.dtsi +++ b/arch/arm/dts/ast2600.dtsi @@ -868,6 +868,7 @@ clocks = <&scu ASPEED_CLK_APB2>; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_i2c3_default>;
status = "disabled";};
i2c3: i2c@200 {
@@ -883,6 +884,7 @@ clocks = <&scu ASPEED_CLK_APB2>; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_i2c4_default>;
status = "disabled";};
i2c4: i2c@280 {
@@ -898,6 +900,7 @@ clocks = <&scu ASPEED_CLK_APB2>; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_i2c5_default>;
status = "disabled";};
i2c5: i2c@300 {
@@ -913,6 +916,7 @@ clocks = <&scu ASPEED_CLK_APB2>; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_i2c6_default>;
status = "disabled";};
i2c6: i2c@380 {
@@ -928,6 +932,7 @@ clocks = <&scu ASPEED_CLK_APB2>; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_i2c7_default>;
status = "disabled";};
i2c7: i2c@400 {
@@ -943,6 +948,7 @@ clocks = <&scu ASPEED_CLK_APB2>; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_i2c8_default>;
status = "disabled";};
i2c8: i2c@480 {
@@ -958,6 +964,7 @@ clocks = <&scu ASPEED_CLK_APB2>; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_i2c9_default>;
status = "disabled";};
i2c9: i2c@500 {
-- 2.35.1