On Wed, Mar 28, 2012 at 12:16 AM, Marek Vasut marek.vasut@gmail.com wrote:
Dear Scott Wood,
On 03/27/2012 03:53 PM, Wolfgang Denk wrote:
Dear Frank,
In message
CADNf2sxrQFDU0LLQWp5huRGgQiKbaLik1+2C=Oj=gjORP6XacA@mail.gmail.com you wrote:
I'm trying to figure out if anyone has ported a PPC system to QEMU that is capable of booting U-Boot. Similar to the ARM versatilepb target, but for PPC instead. I've tried the Bamboo and MPC8544DS but it seems they only use stubs to OS calls and parses a DTB for info.
Did you check which configurations the Yocto project are using? They provide qemu based emulations for ARM, MIPS, PPC and x86, and I would be really surprised if the ARM and PPC configs were not based on U-Boot ... [ARM: beagleboard; PPC: mpc8315e-rdb; MIPS: routerstationpro]
I'm not familiar with what Yocto does, but at least for Freescale PPC chips QEMU does not emulate enough of the hardware to run U-Boot (at least, not without significant U-Boot hacking that I'm not aware of anyone having done). QEMU loads Linux directly.
I don't see mpc83xx support in QEMU at all.
Yep, either bamboo or taihu don't boot for me in qemu :-(
Hi Marek, taihu was my next target to test, so thanks for sparing my time. Next would be to try to dig up a target called Walnut. Check this: http://lists.denx.de/pipermail/u-boot/2008-November/043400.html
I cannot see that QEMU lists walnut as a target. Maybe the patches wasn't sent?
Best regards, Frank