On 18.02.19 18:28, Murali Karicheri wrote:
Enhance the netcp driver to support phys that can be configured for internal delay (rgmii-id, rgmii-rxid, rgmii-txid)
Signed-off-by: Murali Karicheri m-karicheri2@ti.com
drivers/net/ti/keystone_net.c | 22 +++++++++++++++++++++- 1 file changed, 21 insertions(+), 1 deletion(-)
diff --git a/drivers/net/ti/keystone_net.c b/drivers/net/ti/keystone_net.c index a3ba91cc3f..defc57b29f 100644 --- a/drivers/net/ti/keystone_net.c +++ b/drivers/net/ti/keystone_net.c @@ -88,6 +88,7 @@ struct ks2_eth_priv { struct mii_dev *mdio_bus; int phy_addr; phy_interface_t phy_if;
- int phy_of_handle; int sgmii_link_type; void *mdio_base; struct rx_buff_desc net_rx_buffs;
@@ -588,6 +589,10 @@ static int ks2_eth_probe(struct udevice *dev) if (priv->has_mdio) { priv->phydev = phy_connect(priv->mdio_bus, priv->phy_addr, dev, priv->phy_if); +#ifdef CONFIG_DM_ETH
- if (priv->phy_of_handle)
dev_set_of_offset(priv->phydev->dev, priv->phy_of_handle);+#endif
Above is not correct, it has to be smth. like
#ifdef CONFIG_DM_ETH if (priv->phy_of_handle) phydev->node = offset_to_ofnode(priv->phy_of_handle); #endif
see commit d4bb98170006e "drivers: net: cpsw: fix phy dt node setting"
phy_config(priv->phydev);}