This configures the PLL5P clock frequency to something in the ballpark of 1GHz and allows more choices for MBUS and G2D clock frequency selection (using their own divisors). In particular, it enables the use of 2/3 clock speed ratio between MBUS and DRAM.
Signed-off-by: Siarhei Siamashka siarhei.siamashka@gmail.com Acked-by: Ian Campbell ijc@hellion.org.uk --- Changes for v2: - break lines in the commit message in order not to exceed 72 characters line limit - no other changes
arch/arm/cpu/armv7/sunxi/dram.c | 28 +++++++++++----------------- 1 file changed, 11 insertions(+), 17 deletions(-)
diff --git a/arch/arm/cpu/armv7/sunxi/dram.c b/arch/arm/cpu/armv7/sunxi/dram.c index 2403659..6f98c6a 100644 --- a/arch/arm/cpu/armv7/sunxi/dram.c +++ b/arch/arm/cpu/armv7/sunxi/dram.c @@ -243,7 +243,7 @@ static void mctl_setup_dram_clock(u32 clk, u32 mbus_clk) /* PLL5P and PLL6 are the potential clock sources for MBUS */ u32 pll6x_div, pll5p_div; u32 pll6x_clk = clock_get_pll6() / 1000000; - u32 pll5p_clk = clk / 24 * 24; + u32 pll5p_clk = clk / 24 * 48; u32 pll5p_rate, pll6x_rate; #ifdef CONFIG_SUN7I pll6x_clk *= 2; /* sun7i uses PLL6*2, sun5i uses just PLL6 */ @@ -256,46 +256,40 @@ static void mctl_setup_dram_clock(u32 clk, u32 mbus_clk) reg_val &= ~CCM_PLL5_CTRL_N_MASK; /* set N to 0 (x0) */ reg_val &= ~CCM_PLL5_CTRL_P_MASK; /* set P to 0 (x1) */ if (clk >= 540 && clk < 552) { - /* dram = 540MHz, pll5p = 540MHz */ - pll5p_clk = 540; + /* dram = 540MHz, pll5p = 1080MHz */ + pll5p_clk = 1080; reg_val |= CCM_PLL5_CTRL_M(CCM_PLL5_CTRL_M_X(2)); reg_val |= CCM_PLL5_CTRL_K(CCM_PLL5_CTRL_K_X(3)); reg_val |= CCM_PLL5_CTRL_N(CCM_PLL5_CTRL_N_X(15)); - reg_val |= CCM_PLL5_CTRL_P(1); } else if (clk >= 512 && clk < 528) { - /* dram = 512MHz, pll5p = 384MHz */ - pll5p_clk = 384; + /* dram = 512MHz, pll5p = 1536MHz */ + pll5p_clk = 1536; reg_val |= CCM_PLL5_CTRL_M(CCM_PLL5_CTRL_M_X(3)); reg_val |= CCM_PLL5_CTRL_K(CCM_PLL5_CTRL_K_X(4)); reg_val |= CCM_PLL5_CTRL_N(CCM_PLL5_CTRL_N_X(16)); - reg_val |= CCM_PLL5_CTRL_P(2); } else if (clk >= 496 && clk < 504) { - /* dram = 496MHz, pll5p = 372MHz */ - pll5p_clk = 372; + /* dram = 496MHz, pll5p = 1488MHz */ + pll5p_clk = 1488; reg_val |= CCM_PLL5_CTRL_M(CCM_PLL5_CTRL_M_X(3)); reg_val |= CCM_PLL5_CTRL_K(CCM_PLL5_CTRL_K_X(2)); reg_val |= CCM_PLL5_CTRL_N(CCM_PLL5_CTRL_N_X(31)); - reg_val |= CCM_PLL5_CTRL_P(2); } else if (clk >= 468 && clk < 480) { - /* dram = 468MHz, pll5p = 468MHz */ - pll5p_clk = 468; + /* dram = 468MHz, pll5p = 936MHz */ + pll5p_clk = 936; reg_val |= CCM_PLL5_CTRL_M(CCM_PLL5_CTRL_M_X(2)); reg_val |= CCM_PLL5_CTRL_K(CCM_PLL5_CTRL_K_X(3)); reg_val |= CCM_PLL5_CTRL_N(CCM_PLL5_CTRL_N_X(13)); - reg_val |= CCM_PLL5_CTRL_P(1); } else if (clk >= 396 && clk < 408) { - /* dram = 396MHz, pll5p = 396MHz */ - pll5p_clk = 396; + /* dram = 396MHz, pll5p = 792MHz */ + pll5p_clk = 792; reg_val |= CCM_PLL5_CTRL_M(CCM_PLL5_CTRL_M_X(2)); reg_val |= CCM_PLL5_CTRL_K(CCM_PLL5_CTRL_K_X(3)); reg_val |= CCM_PLL5_CTRL_N(CCM_PLL5_CTRL_N_X(11)); - reg_val |= CCM_PLL5_CTRL_P(1); } else { /* any other frequency that is a multiple of 24 */ reg_val |= CCM_PLL5_CTRL_M(CCM_PLL5_CTRL_M_X(2)); reg_val |= CCM_PLL5_CTRL_K(CCM_PLL5_CTRL_K_X(2)); reg_val |= CCM_PLL5_CTRL_N(CCM_PLL5_CTRL_N_X(clk / 24)); - reg_val |= CCM_PLL5_CTRL_P(CCM_PLL5_CTRL_P_X(2)); } reg_val &= ~CCM_PLL5_CTRL_VCO_GAIN; /* PLL VCO Gain off */ reg_val |= CCM_PLL5_CTRL_EN; /* PLL On */