On Tue, Jun 16, 2020 at 5:51 PM Tom Rini trini@konsulko.com wrote:
Ah. So this is probably why the DT being right isn't helping then. If you want to blind-convert I'm happy to test, otherwise do you have a similar board conversion for me to look at? Thanks!
Please try Vladimir's suggestion as it seems to be the less intrusive approach:
--- a/board/solidrun/mx6cuboxi/mx6cuboxi.c +++ b/board/solidrun/mx6cuboxi/mx6cuboxi.c @@ -321,7 +321,7 @@ int board_eth_init(bd_t *bis) if (!bus) return -EINVAL;
- phydev = phy_find_by_mask(bus, ETH_PHY_MASK, PHY_INTERFACE_MODE_RGMII); + phydev = phy_find_by_mask(bus, ETH_PHY_MASK, PHY_INTERFACE_MODE_RGMII_ID); if (!phydev) { ret = -EINVAL; goto free_bus;
Here is a similar DM_ETH board conversion:
commit 02ee7a4aa57b37d6003263b69b1852c4cda5975e Author: Alifer Moraes alifer.wsdm@gmail.com Date: Mon Feb 10 11:28:01 2020 -0300
mx6sabresd: Convert ethernet to driver model
Convert imx6sabresd ethernet to driver model to fix the following warning:
===================== WARNING ====================== This board does not use CONFIG_DM_ETH (Driver Model for Ethernet drivers). Please update the board to use CONFIG_DM_ETH before the v2020.07 release. Failure to update by the deadline may result in board removal. See doc/driver-model/migration.rst for more info. ====================================================
Signed-off-by: Alifer Moraes alifer.wsdm@gmail.com Reviewed-by: Fabio Estevam festevam@gmail.com
Let us know if this helps.