On 4/21/19 6:57 PM, Philipp Tomsich wrote:
The SPL for the Tinker Board has to fit into 32 KiB. Currently this limit is exceeded.
CONFIG_SPL_I2C_SUPPORT is not needed to move to main U-Boot. So let's disable it.
Suggested-by: David Wu david.wu@rock-chips.com Signed-off-by: Heinrich Schuchardt xypron.glpk@gmx.de Reviewed-by: David Wu david.wu@rock-chips.com
This solves only one of the problems with the boards in v2019.04. The next problem is that reading the environment from MMC fails.
The patch [PATCH v3 1/1] configs: rk3288: Tinker Board SPL file must fit into 32 KiB https://lists.denx.de/pipermail/u-boot/2019-February/358883.html makes the problem visibe.
configs/tinker-rk3288_defconfig | 1 - 1 file changed, 1 deletion(-)
Reviewed-by: Philipp Tomsich philipp.tomsich@theobroma-systems.com
Hello Tom,
could you, please, merge this patch that has been lingering since February to fix the build issue for the TinkerBoard:
https://lists.denx.de/pipermail/u-boot/2019-February/360367.html https://patchwork.ozlabs.org/patch/1049112/
You will have to rebase the patch:
CONFIG_SPL_TEXT_BASE=0xff704000 <<<< change this line CONFIG_SPL_STACK_R=y CONFIG_SPL_STACK_R_MALLOC_SIMPLE_LEN=0x2000 -CONFIG_SPL_I2C_SUPPORT=y CONFIG_CMD_GPIO=y CONFIG_CMD_GPT=y CONFIG_CMD_I2C=y
Best regards
Heinrich