There is a driver to support built in USB controller now, so lets add the USB nodes to DTSI.
Signed-off-by: Robert Marko robert.marko@sartura.hr --- arch/arm/dts/qcom-ipq4019.dtsi | 18 ++++++++++++++++++ 1 file changed, 18 insertions(+)
diff --git a/arch/arm/dts/qcom-ipq4019.dtsi b/arch/arm/dts/qcom-ipq4019.dtsi index 67122de9c0..e82f1253a1 100644 --- a/arch/arm/dts/qcom-ipq4019.dtsi +++ b/arch/arm/dts/qcom-ipq4019.dtsi @@ -89,5 +89,23 @@ gpio-bank-name="soc"; #gpio-cells = <2>; }; + + usb3: xhci@8a00000 { + compatible = "qcom,dwc3-ipq"; + #address-cells = <1>; + #size-cells = <1>; + reg = <0x8a00000 0xcd00>; + rst-ctrl = <0x181E038 0x4>; + status = "disabled"; + }; + + usb2: xhci@6000000 { + compatible = "qcom,dwc3-ipq"; + #address-cells = <1>; + #size-cells = <1>; + reg = <0x6000000 0xcd00>; + rst-ctrl = <0x181E01C 0x4>; + status = "disabled"; + }; }; };