From: Stefan Herbrechtsmeier stefan.herbrechtsmeier@weidmueller.com
If available use the clock framework to calculate the clock rate of the zynq timer.
Signed-off-by: Stefan Herbrechtsmeier stefan.herbrechtsmeier@weidmueller.com ---
arch/arm/mach-zynq/timer.c | 25 +++++++++++++++++++++++++ 1 file changed, 25 insertions(+)
diff --git a/arch/arm/mach-zynq/timer.c b/arch/arm/mach-zynq/timer.c index 8ff82dc..0335cbe 100644 --- a/arch/arm/mach-zynq/timer.c +++ b/arch/arm/mach-zynq/timer.c @@ -1,4 +1,7 @@ /* + * Copyright (C) 2017 Weidmüller Interface GmbH & Co. KG + * Stefan Herbrechtsmeier stefan.herbrechtsmeier@weidmueller.com + * * Copyright (C) 2012 Michal Simek monstr@monstr.eu * Copyright (C) 2011-2012 Xilinx, Inc. All rights reserved. * @@ -25,8 +28,10 @@ * SPDX-License-Identifier: GPL-2.0+ */
+#include <clk.h> #include <common.h> #include <div64.h> +#include <dm.h> #include <asm/io.h> #include <asm/arch/hardware.h> #include <asm/arch/clk.h> @@ -56,6 +61,26 @@ int timer_init(void) (TIMER_PRESCALE << SCUTIMER_CONTROL_PRESCALER_SHIFT) | SCUTIMER_CONTROL_ENABLE_MASK;
+#if defined(CONFIG_CLK) || defined(CONFIG_SPL_CLK) + struct udevice *dev; + struct clk clk; + int ret; + + ret = uclass_get_device_by_driver(UCLASS_CLK, + DM_GET_DRIVER(zynq_clk), &dev); + if (ret) + return ret; + + clk.id = cpu_6or4x_clk; + ret = clk_request(dev, &clk); + if (ret < 0) + return ret; + + gd->cpu_clk = clk_get_rate(&clk); + + clk_free(&clk); +#endif + gd->arch.timer_rate_hz = (gd->cpu_clk / 2) / (TIMER_PRESCALE + 1);
/* Load the timer counter register */