On Thursday, January 28, 2016 at 03:43:58 PM, Wills Wang wrote:
On Thursday, January 28, 2016 09:44 PM, Marek Vasut wrote:
On Thursday, January 28, 2016 at 02:31:11 PM, Wills Wang wrote:
On Thursday, January 28, 2016 07:51 AM, Marek Vasut wrote:
In order to support boards with ath79 from different vendors and thus located under /board/$VENDOR/ , we need to define SYS_VENDOR and SYS_SOC in the board-level Kconfig. Move these two variables into board-level Kconfig for both ap121 and ap143 boards.
Signed-off-by: Marek Vasut marex@denx.de Cc: Daniel Schwierzeck daniel.schwierzeck@gmail.com Cc: Wills Wang wills.wang@live.com
arch/mips/mach-ath79/Kconfig | 6 ------ board/ath79/ap121/Kconfig | 6 ++++++ board/ath79/ap143/Kconfig | 6 ++++++ 3 files changed, 12 insertions(+), 6 deletions(-)
diff --git a/arch/mips/mach-ath79/Kconfig b/arch/mips/mach-ath79/Kconfig index 95f7de9..8f07a77 100644 --- a/arch/mips/mach-ath79/Kconfig +++ b/arch/mips/mach-ath79/Kconfig @@ -1,12 +1,6 @@
menu "QCA/Athroes 7xxx/9xxx platforms"
depends on ARCH_ATH79-config SYS_VENDOR
- default "ath79"
-config SYS_SOC
default "ath79"
config SOC_AR933X
bool select SUPPORTS_BIG_ENDIAN
diff --git a/board/ath79/ap121/Kconfig b/board/ath79/ap121/Kconfig index ec72914..a4e5690 100644 --- a/board/ath79/ap121/Kconfig +++ b/board/ath79/ap121/Kconfig @@ -1,5 +1,11 @@
if BOARD_AP121
+config SYS_VENDOR
- default "ath79"
+config SYS_SOC
default "ath79"
config SYS_BOARD
default "ap121"
diff --git a/board/ath79/ap143/Kconfig b/board/ath79/ap143/Kconfig index 118b9b5..2e54fa7 100644 --- a/board/ath79/ap143/Kconfig +++ b/board/ath79/ap143/Kconfig @@ -1,5 +1,11 @@
if BOARD_AP143
+config SYS_VENDOR
- default "ath79"
+config SYS_SOC
default "ath79"
config SYS_BOARD
default "ap143"
I plan to place ap121 and ap143 into board/qca, and then move these into board directory.
That's fine, but keep this patch or something along those lines, since I want to create board/arduino/yun/ soon after your stuff is accepted.
btw. I got both EHCI and ethernet operational, but I am still struggling with booting the board from the SPI NOR. I think there's something broken in start.S or lowlevel_init.S . Which board do you use for your development and testing ?
My private board was made by myself, it originate from AP121, and it's circuit is compatible with AP121.
How do you program your board ? Do you have EJTAG?
What SPI NOR do you use?