This is now handled automatically by the pinctrl driver.
Signed-off-by: Samuel Holland samuel@sholland.org ---
(no changes since v1)
arch/arm/include/asm/arch-sunxi/gpio.h | 2 - board/sunxi/gmac.c | 55 -------------------------- 2 files changed, 57 deletions(-)
diff --git a/arch/arm/include/asm/arch-sunxi/gpio.h b/arch/arm/include/asm/arch-sunxi/gpio.h index e93c9e84c9..2aa6bbb178 100644 --- a/arch/arm/include/asm/arch-sunxi/gpio.h +++ b/arch/arm/include/asm/arch-sunxi/gpio.h @@ -135,8 +135,6 @@ enum sunxi_gpio_number { #define SUNXI_GPIO_OUTPUT 1 #define SUNXI_GPIO_DISABLE 7
-#define SUN6I_GPA_GMAC 2 -#define SUN7I_GPA_GMAC 5 #define SUN8I_H3_GPA_UART0 2
#define SUN4I_GPB_PWM 2 diff --git a/board/sunxi/gmac.c b/board/sunxi/gmac.c index 1fa54ed72d..2a885305eb 100644 --- a/board/sunxi/gmac.c +++ b/board/sunxi/gmac.c @@ -1,13 +1,11 @@ #include <common.h> #include <netdev.h> #include <miiphy.h> -#include <asm/gpio.h> #include <asm/io.h> #include <asm/arch/clock.h>
void eth_init_board(void) { - int pin; struct sunxi_ccm_reg *const ccm = (struct sunxi_ccm_reg *)SUNXI_CCM_BASE;
@@ -21,57 +19,4 @@ void eth_init_board(void) setbits_le32(&ccm->gmac_clk_cfg, CCM_GMAC_CTRL_TX_CLK_SRC_MII | CCM_GMAC_CTRL_GPIT_MII); #endif - -#ifndef CONFIG_MACH_SUN6I - /* Configure pin mux settings for GMAC */ -#ifdef CONFIG_SUN7I_GMAC_FORCE_TXERR - for (pin = SUNXI_GPA(0); pin <= SUNXI_GPA(17); pin++) { -#else - for (pin = SUNXI_GPA(0); pin <= SUNXI_GPA(16); pin++) { -#endif -#ifdef CONFIG_RGMII - /* skip unused pins in RGMII mode */ - if (pin == SUNXI_GPA(9) || pin == SUNXI_GPA(14)) - continue; -#endif - sunxi_gpio_set_cfgpin(pin, SUN7I_GPA_GMAC); - sunxi_gpio_set_drv(pin, 3); - } -#elif defined CONFIG_RGMII - /* Configure sun6i RGMII mode pin mux settings */ - for (pin = SUNXI_GPA(0); pin <= SUNXI_GPA(3); pin++) { - sunxi_gpio_set_cfgpin(pin, SUN6I_GPA_GMAC); - sunxi_gpio_set_drv(pin, 3); - } - for (pin = SUNXI_GPA(9); pin <= SUNXI_GPA(14); pin++) { - sunxi_gpio_set_cfgpin(pin, SUN6I_GPA_GMAC); - sunxi_gpio_set_drv(pin, 3); - } - for (pin = SUNXI_GPA(19); pin <= SUNXI_GPA(20); pin++) { - sunxi_gpio_set_cfgpin(pin, SUN6I_GPA_GMAC); - sunxi_gpio_set_drv(pin, 3); - } - for (pin = SUNXI_GPA(25); pin <= SUNXI_GPA(27); pin++) { - sunxi_gpio_set_cfgpin(pin, SUN6I_GPA_GMAC); - sunxi_gpio_set_drv(pin, 3); - } -#elif defined CONFIG_GMII - /* Configure sun6i GMII mode pin mux settings */ - for (pin = SUNXI_GPA(0); pin <= SUNXI_GPA(27); pin++) { - sunxi_gpio_set_cfgpin(pin, SUN6I_GPA_GMAC); - sunxi_gpio_set_drv(pin, 2); - } -#else - /* Configure sun6i MII mode pin mux settings */ - for (pin = SUNXI_GPA(0); pin <= SUNXI_GPA(3); pin++) - sunxi_gpio_set_cfgpin(pin, SUN6I_GPA_GMAC); - for (pin = SUNXI_GPA(8); pin <= SUNXI_GPA(9); pin++) - sunxi_gpio_set_cfgpin(pin, SUN6I_GPA_GMAC); - for (pin = SUNXI_GPA(11); pin <= SUNXI_GPA(14); pin++) - sunxi_gpio_set_cfgpin(pin, SUN6I_GPA_GMAC); - for (pin = SUNXI_GPA(19); pin <= SUNXI_GPA(24); pin++) - sunxi_gpio_set_cfgpin(pin, SUN6I_GPA_GMAC); - for (pin = SUNXI_GPA(26); pin <= SUNXI_GPA(27); pin++) - sunxi_gpio_set_cfgpin(pin, SUN6I_GPA_GMAC); -#endif }