Re: [U-Boot] arm: spear: enable GPIO3 and 4 clocks when the GPIO controller driver is built

On Fri, Aug 31, 2018 at 04:15:53PM +0200, Quentin Schulz wrote:

There are multiple GPIOs that can be used with the same driver depending on the CONFIG_GPIO_BASE defined in the controller driver.

GPIO3 and 4 require a clock to be enabled so let's enable them when the driver is built.

Signed-off-by: Quentin Schulz quentin.schulz@bootlin.com

Applied to u-boot/master, thanks!