Traditionally Allwinner SoCs have their boot ROM mapped just below 4GB, while the first SRAM region is mapped at address 0. With the extended physical memory support of the A80 this was changed, so the BROM is now at address 0 and the SRAM region starts right behind this at 64KB. This configuration seems to be called "high SRAM". Instead of enumerating the SoCs which have copied this configuration, let's call a spade a spade and introduce a Kconfig option for this setup. SoCs implementing this (A80, A64 and H5, so far), can then select this configuration. Simplify the config header definition on the way.
Signed-off-by: Andre Przywara andre.przywara@arm.com Acked-by: Maxime Ripard maxime.ripard@free-electrons.com --- arch/arm/include/asm/arch-sunxi/spl.h | 2 +- board/sunxi/Kconfig | 6 ++++++ include/configs/sunxi-common.h | 19 +++++++------------ 3 files changed, 14 insertions(+), 13 deletions(-)
diff --git a/arch/arm/include/asm/arch-sunxi/spl.h b/arch/arm/include/asm/arch-sunxi/spl.h index 5d7ab55..831d0c0 100644 --- a/arch/arm/include/asm/arch-sunxi/spl.h +++ b/arch/arm/include/asm/arch-sunxi/spl.h @@ -12,7 +12,7 @@ #define SPL_SIGNATURE "SPL" /* marks "sunxi" SPL header */ #define SPL_HEADER_VERSION 1
-#if defined(CONFIG_MACH_SUN9I) || defined(CONFIG_MACH_SUN50I) +#ifdef CONFIG_SUNXI_HIGH_SRAM #define SPL_ADDR 0x10000 #else #define SPL_ADDR 0x0 diff --git a/board/sunxi/Kconfig b/board/sunxi/Kconfig index ea0d658..688cb12 100644 --- a/board/sunxi/Kconfig +++ b/board/sunxi/Kconfig @@ -27,6 +27,10 @@ config SPL_POWER_SUPPORT config SPL_SERIAL_SUPPORT default y
+config SUNXI_HIGH_SRAM + bool + default n + # Note only one of these may be selected at a time! But hidden choices are # not supported by Kconfig config SUNXI_GEN_SUN4I @@ -120,6 +124,7 @@ config MACH_SUN8I_H3 config MACH_SUN9I bool "sun9i (Allwinner A80)" select CPU_V7 + select SUNXI_HIGH_SRAM select SUNXI_GEN_SUN6I select SUPPORT_SPL
@@ -127,6 +132,7 @@ config MACH_SUN50I bool "sun50i (Allwinner A64)" select ARM64 select SUNXI_GEN_SUN6I + select SUNXI_HIGH_SRAM select SUPPORT_SPL
endchoice diff --git a/include/configs/sunxi-common.h b/include/configs/sunxi-common.h index 2b67827..0997dfa 100644 --- a/include/configs/sunxi-common.h +++ b/include/configs/sunxi-common.h @@ -86,7 +86,7 @@
#define CONFIG_SPL_BSS_MAX_SIZE 0x00080000 /* 512 KiB */
-#if defined(CONFIG_MACH_SUN9I) || defined(CONFIG_MACH_SUN50I) +#ifdef CONFIG_SUNXI_HIGH_SRAM /* * The A80's A1 sram starts at 0x00010000 rather then at 0x00000000 and is * slightly bigger. Note that it is possible to map the first 32 KiB of the @@ -186,29 +186,24 @@ #define CONFIG_SPL_BOARD_LOAD_IMAGE #endif
-#if defined(CONFIG_MACH_SUN9I) || defined(CONFIG_MACH_SUN50I) +#ifdef CONFIG_SUNXI_HIGH_SRAM #define CONFIG_SPL_TEXT_BASE 0x10040 /* sram start+header */ -#define CONFIG_SPL_MAX_SIZE 0x7fc0 /* 32 KiB on sun9/50i */ +#define CONFIG_SPL_MAX_SIZE 0x7fc0 /* 32 KiB */ +#define LOW_LEVEL_SRAM_STACK 0x00018000 #else #define CONFIG_SPL_TEXT_BASE 0x40 /* sram start+header */ #define CONFIG_SPL_MAX_SIZE 0x5fc0 /* 24KB on sun4i/sun7i */ +#define LOW_LEVEL_SRAM_STACK 0x00008000 /* End of sram */ #endif
+#define CONFIG_SPL_STACK LOW_LEVEL_SRAM_STACK + #ifndef CONFIG_ARM64 #define CONFIG_SPL_LDSCRIPT "arch/arm/cpu/armv7/sunxi/u-boot-spl.lds" #endif
#define CONFIG_SPL_PAD_TO 32768 /* decimal for 'dd' */
-#if defined(CONFIG_MACH_SUN9I) || defined(CONFIG_MACH_SUN50I) -/* FIXME: 40 KiB instead of 32 KiB ? */ -#define LOW_LEVEL_SRAM_STACK 0x00018000 -#define CONFIG_SPL_STACK LOW_LEVEL_SRAM_STACK -#else -/* end of 32 KiB in sram */ -#define LOW_LEVEL_SRAM_STACK 0x00008000 /* End of sram */ -#define CONFIG_SPL_STACK LOW_LEVEL_SRAM_STACK -#endif
/* I2C */ #if defined CONFIG_AXP152_POWER || defined CONFIG_AXP209_POWER || \