On 21/04/2018 17:11, Mans Rullgard wrote:
This allows using the full SPL framework on mxs devices. In this mode, the u-boot.sb image loaded by the boot ROM contains only the SPL which then loads U-Boot proper or a kernel in falcon mode.
Signed-off-by: Mans Rullgard mans@mansr.com
arch/arm/Kconfig | 2 +- arch/arm/cpu/arm926ejs/mxs/Makefile | 4 ++-- arch/arm/cpu/arm926ejs/mxs/mxsimage-spl.mx23.cfg | 5 +++++ arch/arm/cpu/arm926ejs/mxs/mxsimage-spl.mx28.cfg | 6 ++++++ arch/arm/cpu/arm926ejs/mxs/spl_boot.c | 2 ++ include/configs/mxs.h | 2 ++ 6 files changed, 18 insertions(+), 3 deletions(-) create mode 100644 arch/arm/cpu/arm926ejs/mxs/mxsimage-spl.mx23.cfg create mode 100644 arch/arm/cpu/arm926ejs/mxs/mxsimage-spl.mx28.cfg
diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig index 7212fc5afa72..0acdd162b4b3 100644 --- a/arch/arm/Kconfig +++ b/arch/arm/Kconfig @@ -1352,7 +1352,7 @@ source "arch/arm/Kconfig.debug" endmenu
config SPL_LDSCRIPT
default "arch/arm/cpu/arm926ejs/mxs/u-boot-spl.lds" if ARCH_MX23 || ARCH_MX28
default "arch/arm/cpu/arm926ejs/mxs/u-boot-spl.lds" if (ARCH_MX23 || ARCH_MX28) && !SPL_FRAMEWORK default "arch/arm/cpu/arm1136/u-boot-spl.lds" if CPU_ARM1136diff --git a/arch/arm/cpu/arm926ejs/mxs/Makefile b/arch/arm/cpu/arm926ejs/mxs/Makefile index 71c2c0e7b40c..83b05acfa4eb 100644 --- a/arch/arm/cpu/arm926ejs/mxs/Makefile +++ b/arch/arm/cpu/arm926ejs/mxs/Makefile @@ -14,8 +14,8 @@ obj-y += spl_boot.o spl_lradc_init.o spl_mem_init.o spl_power_init.o endif
# Specify the target for use in elftosb call -MKIMAGE_TARGET-$(CONFIG_MX23) = mxsimage.mx23.cfg -MKIMAGE_TARGET-$(CONFIG_MX28) = mxsimage.mx28.cfg +MKIMAGE_TARGET-$(CONFIG_MX23) = mxsimage$(CONFIG_SPL_FRAMEWORK:%=-spl).mx23.cfg +MKIMAGE_TARGET-$(CONFIG_MX28) = mxsimage$(CONFIG_SPL_FRAMEWORK:%=-spl).mx28.cfg
# Generate HAB-capable IVT # diff --git a/arch/arm/cpu/arm926ejs/mxs/mxsimage-spl.mx23.cfg b/arch/arm/cpu/arm926ejs/mxs/mxsimage-spl.mx23.cfg new file mode 100644 index 000000000000..ab2183ed3795 --- /dev/null +++ b/arch/arm/cpu/arm926ejs/mxs/mxsimage-spl.mx23.cfg @@ -0,0 +1,5 @@ +DISPLAYPROGRESS +SECTION 0x0 BOOTABLE
- TAG LAST
- LOAD 0x1000 spl/u-boot-spl.bin
- CALL 0x1000 0x0
diff --git a/arch/arm/cpu/arm926ejs/mxs/mxsimage-spl.mx28.cfg b/arch/arm/cpu/arm926ejs/mxs/mxsimage-spl.mx28.cfg new file mode 100644 index 000000000000..0d95064ff7f1 --- /dev/null +++ b/arch/arm/cpu/arm926ejs/mxs/mxsimage-spl.mx28.cfg @@ -0,0 +1,6 @@ +DISPLAYPROGRESS +SECTION 0x0 BOOTABLE
- TAG LAST
- LOAD 0x1000 spl/u-boot-spl.bin
- LOAD IVT 0x8000 0x1000
- CALL HAB 0x8000 0x0
diff --git a/arch/arm/cpu/arm926ejs/mxs/spl_boot.c b/arch/arm/cpu/arm926ejs/mxs/spl_boot.c index 0c3925640dc9..bc39465fc4e0 100644 --- a/arch/arm/cpu/arm926ejs/mxs/spl_boot.c +++ b/arch/arm/cpu/arm926ejs/mxs/spl_boot.c @@ -146,6 +146,7 @@ void mxs_common_spl_init(const uint32_t arg, const uint32_t *resptr, } }
+#ifndef CONFIG_SPL_FRAMEWORK /* Support aparatus */ inline void board_init_f(unsigned long bootflag) { @@ -158,3 +159,4 @@ inline void board_init_r(gd_t *id, ulong dest_addr) for (;;) ; } +#endif diff --git a/include/configs/mxs.h b/include/configs/mxs.h index f07f81c8415c..0fe0770e13f0 100644 --- a/include/configs/mxs.h +++ b/include/configs/mxs.h @@ -44,8 +44,10 @@ /* Startup hooks */
/* SPL */ +#ifndef CONFIG_SPL_FRAMEWORK #define CONFIG_SPL_NO_CPU_SUPPORT_CODE #define CONFIG_SPL_START_S_PATH "arch/arm/cpu/arm926ejs/mxs" +#endif
/* Memory sizes */ #define CONFIG_SYS_MALLOC_LEN 0x00400000 /* 4 MB for malloc */
Applied to u-boot-imx, thanks !
Best regards, Stefano Babic