Update various build and test components to use the new schema.
Signed-off-by: Simon Glass sjg@chromium.org ---
drivers/core/ofnode.c | 10 +++++----- drivers/video/video-uclass.c | 4 ++-- dts/Kconfig | 2 +- include/dm/device.h | 2 +- include/dm/ofnode.h | 10 +++++----- scripts/Makefile.lib | 12 ++++++------ test/dm/test-fdt.c | 2 +- test/py/tests/test_ofplatdata.py | 8 ++++---- tools/binman/binman.rst | 3 +-- tools/dtoc/test_fdt.py | 8 ++++---- 10 files changed, 30 insertions(+), 31 deletions(-)
diff --git a/drivers/core/ofnode.c b/drivers/core/ofnode.c index 4d56b1a7675..5249a60639b 100644 --- a/drivers/core/ofnode.c +++ b/drivers/core/ofnode.c @@ -1265,22 +1265,22 @@ bool ofnode_pre_reloc(ofnode node) { #if defined(CONFIG_SPL_BUILD) || defined(CONFIG_TPL_BUILD) /* for SPL and TPL the remaining nodes after the fdtgrep 1st pass - * had property dm-pre-reloc or u-boot,dm-spl/tpl. + * had property bootph-all or bootph-pre-sram/bootph-pre-ram. * They are removed in final dtb (fdtgrep 2nd pass) */ return true; #else - if (ofnode_read_bool(node, "u-boot,dm-pre-reloc")) + if (ofnode_read_bool(node, "bootph-all")) return true; - if (ofnode_read_bool(node, "u-boot,dm-pre-proper")) + if (ofnode_read_bool(node, "bootph-some-ram")) return true;
/* * In regular builds individual spl and tpl handling both * count as handled pre-relocation for later second init. */ - if (ofnode_read_bool(node, "u-boot,dm-spl") || - ofnode_read_bool(node, "u-boot,dm-tpl")) + if (ofnode_read_bool(node, "bootph-pre-ram") || + ofnode_read_bool(node, "bootph-pre-sram")) return true;
return false; diff --git a/drivers/video/video-uclass.c b/drivers/video/video-uclass.c index 0ce376ca3f1..17c47f546a1 100644 --- a/drivers/video/video-uclass.c +++ b/drivers/video/video-uclass.c @@ -529,8 +529,8 @@ static int video_post_bind(struct udevice *dev) addr = uc_priv->video_ptr; size = alloc_fb(dev, &addr); if (addr < gd->video_bottom) { - /* Device tree node may need the 'u-boot,dm-pre-reloc' or - * 'u-boot,dm-pre-proper' tag + /* Device tree node may need the 'bootph-all' or + * 'bootph-some-ram' tag */ printf("Video device '%s' cannot allocate frame buffer memory -ensure the device is set up before relocation\n", dev->name); diff --git a/dts/Kconfig b/dts/Kconfig index bc5f22029ff..d7206641c34 100644 --- a/dts/Kconfig +++ b/dts/Kconfig @@ -352,7 +352,7 @@ config OF_SPL_REMOVE_PROPS help Since SPL normally runs in a reduced memory space, the device tree is cut down to only what is needed to load and start U-Boot. Only - nodes marked with the property "u-boot,dm-pre-reloc" will be + nodes marked with the property "bootph-all" will be included. In addition, some properties are not used by U-Boot and can be discarded. This option defines the list of properties to discard. diff --git a/include/dm/device.h b/include/dm/device.h index f3f953c9afc..fa636001df1 100644 --- a/include/dm/device.h +++ b/include/dm/device.h @@ -1066,7 +1066,7 @@ static inline bool device_is_on_pci_bus(const struct udevice *dev) * sub-nodes and binds drivers for each node where a driver can be found. * * If this is called prior to relocation, only pre-relocation devices will be - * bound (those marked with u-boot,dm-pre-reloc in the device tree, or where + * bound (those marked with bootph-all in the device tree, or where * the driver has the DM_FLAG_PRE_RELOC flag set). Otherwise, all devices will * be bound. * diff --git a/include/dm/ofnode.h b/include/dm/ofnode.h index fa9865602d8..793ad37ff2c 100644 --- a/include/dm/ofnode.h +++ b/include/dm/ofnode.h @@ -1176,12 +1176,12 @@ int ofnode_read_simple_size_cells(ofnode node); * determine if a node was bound in one of SPL/TPL stages. * * There are 4 settings currently in use - * - u-boot,dm-pre-proper: U-Boot proper pre-relocation only - * - u-boot,dm-pre-reloc: legacy and indicates any of TPL or SPL + * - bootph-some-ram: U-Boot proper pre-relocation only + * - bootph-all: all phases * Existing platforms only use it to indicate nodes needed in - * SPL. Should probably be replaced by u-boot,dm-spl for new platforms. - * - u-boot,dm-spl: SPL and U-Boot pre-relocation - * - u-boot,dm-tpl: TPL and U-Boot pre-relocation + * SPL. Should probably be replaced by bootph-pre-ram for new platforms. + * - bootph-pre-ram: SPL and U-Boot pre-relocation + * - bootph-pre-sram: TPL and U-Boot pre-relocation * * @node: node to check * Return: true if node is needed in SPL/TL, false otherwise diff --git a/scripts/Makefile.lib b/scripts/Makefile.lib index ac45a884785..8f251831307 100644 --- a/scripts/Makefile.lib +++ b/scripts/Makefile.lib @@ -585,24 +585,24 @@ cmd_mkimage = $(objtree)/tools/mkimage $(MKIMAGEFLAGS_$(@F)) -d $< $@ \ # --------------------------------------------------------------------------- # Pass the original device tree file through fdtgrep twice. The first pass # removes any unwanted nodes (i.e. those which don't have the -# 'u-boot,dm-pre-reloc' property and thus are not needed by SPL. The second +# 'bootph-all' property and thus are not needed by SPL. The second # pass removes various unused properties from the remaining nodes. # The output is typically a much smaller device tree file. ifeq ($(CONFIG_VPL_BUILD),y) -fdtgrep_props := -b u-boot,dm-pre-reloc -b u-boot,dm-vpl +fdtgrep_props := -b bootph-all -b bootph-verify else ifeq ($(CONFIG_TPL_BUILD),y) -fdtgrep_props := -b u-boot,dm-pre-reloc -b u-boot,dm-tpl +fdtgrep_props := -b bootph-all -b bootph-pre-sram else -fdtgrep_props := -b u-boot,dm-pre-reloc -b u-boot,dm-spl +fdtgrep_props := -b bootph-all -b bootph-pre-ram endif endif quiet_cmd_fdtgrep = FDTGREP $@ cmd_fdtgrep = $(objtree)/tools/fdtgrep $(fdtgrep_props) -RT $< \ -n /chosen -n /config -O dtb | \ $(objtree)/tools/fdtgrep -r -O dtb - -o $@ \ - -P u-boot,dm-pre-reloc -P u-boot,dm-spl -P u-boot,dm-tpl \ - -P u-boot,dm-vpl \ + -P bootph-all -P bootph-pre-ram -P bootph-pre-sram \ + -P bootph-verify \ $(addprefix -P ,$(subst $",,$(CONFIG_OF_SPL_REMOVE_PROPS)))
# fdt_rm_props diff --git a/test/dm/test-fdt.c b/test/dm/test-fdt.c index 7cd2d046122..9e19ce7345c 100644 --- a/test/dm/test-fdt.c +++ b/test/dm/test-fdt.c @@ -214,7 +214,7 @@ static int dm_test_fdt_pre_reloc(struct unit_test_state *uts)
/* * These are 2 pre-reloc devices: - * one with "u-boot,dm-pre-reloc" property (a-test node), and the other + * one with "bootph-all" property (a-test node), and the other * one whose driver marked with DM_FLAG_PRE_RELOC flag (h-test node). */ ut_asserteq(2, list_count_items(&uc->dev_head)); diff --git a/test/py/tests/test_ofplatdata.py b/test/py/tests/test_ofplatdata.py index e9cce4daf48..51a188454f3 100644 --- a/test/py/tests/test_ofplatdata.py +++ b/test/py/tests/test_ofplatdata.py @@ -13,10 +13,10 @@ def test_spl_devicetree(u_boot_console): fdtgrep = cons.config.build_dir + '/tools/fdtgrep' output = util.run_and_log(cons, [fdtgrep, '-l', dtb])
- assert "u-boot,dm-pre-reloc" not in output - assert "u-boot,dm-pre-proper" not in output - assert "u-boot,dm-spl" not in output - assert "u-boot,dm-tpl" not in output + assert "bootph-all" not in output + assert "bootph-some-ram" not in output + assert "bootph-pre-ram" not in output + assert "bootph-pre-sram" not in output
assert "spl-test5" not in output assert "spl-test6" not in output diff --git a/tools/binman/binman.rst b/tools/binman/binman.rst index fa8abdcd86a..56e24b50d81 100644 --- a/tools/binman/binman.rst +++ b/tools/binman/binman.rst @@ -1114,8 +1114,7 @@ It is sometimes inconvenient to add a 'binman' node to the .dts file for each board. This can be done by using #include to bring in a common file. Another approach supported by the U-Boot build system is to automatically include a common header. You can then put the binman node (and anything else that is -specific to U-Boot, such as u-boot,dm-pre-reloc properies) in that header -file. +specific to U-Boot, such as bootph-all properies) in that header file.
Binman will search for the following files in arch/<arch>/dts::
diff --git a/tools/dtoc/test_fdt.py b/tools/dtoc/test_fdt.py index 1c33b888830..dffa86fc190 100755 --- a/tools/dtoc/test_fdt.py +++ b/tools/dtoc/test_fdt.py @@ -132,10 +132,10 @@ class TestFdt(unittest.TestCase): """Tests obtaining a list of properties""" node = self.dtb.GetNode('/spl-test') props = self.dtb.GetProps(node) - self.assertEqual(['boolval', 'bytearray', 'byteval', 'compatible', - 'int64val', 'intarray', 'intval', 'longbytearray', - 'maybe-empty-int', 'notstring', 'stringarray', - 'stringval', 'bootph-all'], + self.assertEqual(['boolval', 'bootph-all', 'bytearray', 'byteval', + 'compatible', 'int64val', 'intarray', 'intval', + 'longbytearray', 'maybe-empty-int', 'notstring', + 'stringarray', 'stringval', ], sorted(props.keys()))
def test_check_error(self):