Currently the DRAM bus gate and reset is changed at the same time in H6 DRAM initialization code, which disobeys the user manual's programming guide.
Fix the sequence by follow the sequence suggested by the user manual (ungate the bus clock after release the reset signal).
By some experiments it seems to fix the DRAM size detection failure that rarely happens.
Signed-off-by: Icenowy Zheng icenowy@aosc.io --- arch/arm/mach-sunxi/dram_sun50i_h6.c | 6 +++++- 1 file changed, 5 insertions(+), 1 deletion(-)
diff --git a/arch/arm/mach-sunxi/dram_sun50i_h6.c b/arch/arm/mach-sunxi/dram_sun50i_h6.c index 6b94cf38c5..5da90a2835 100644 --- a/arch/arm/mach-sunxi/dram_sun50i_h6.c +++ b/arch/arm/mach-sunxi/dram_sun50i_h6.c @@ -299,6 +299,8 @@ static void mctl_sys_init(struct dram_para *para)
/* Put all DRAM-related blocks to reset state */ clrbits_le32(&ccm->mbus_cfg, MBUS_ENABLE | MBUS_RESET); + clrbits_le32(&ccm->dram_gate_reset, BIT(0)); + udelay(5); writel(0, &ccm->dram_gate_reset); clrbits_le32(&ccm->pll5_cfg, CCM_PLL5_CTRL_EN); clrbits_le32(&ccm->dram_clk_cfg, DRAM_MOD_RESET); @@ -313,7 +315,9 @@ static void mctl_sys_init(struct dram_para *para) /* Configure DRAM mod clock */ writel(DRAM_CLK_SRC_PLL5, &ccm->dram_clk_cfg); setbits_le32(&ccm->dram_clk_cfg, DRAM_CLK_UPDATE); - writel(BIT(0) | BIT(RESET_SHIFT), &ccm->dram_gate_reset); + writel(BIT(RESET_SHIFT), &ccm->dram_gate_reset); + udelay(5); + setbits_le32(&ccm->dram_gate_reset, BIT(0));
/* Disable all channels */ writel(0, &mctl_com->maer0);