Hi
On Sat, Dec 17, 2022 at 2:00 PM Roger Quadros rogerq@kernel.org wrote:
Hi Michael & Dario,
On 12/12/2022 11:39, Michael Nazzareno Trimarchi wrote:
Hi Roger
Most of the building problem can be tested with this configuration
make ARCH=arm chiliboard_defconfig
I resolved the original issue for all boards but now face a new issue only with the chiliboard.
arm-none-linux-gnueabihf-ld.bfd: drivers/mtd/nand/raw/omap_elm.o: in function `dev_read_resource': /work/u-boot/include/dm/read.h:1139: undefined reference to `ofnode_read_resource' AR common/built-in.o make[2]: *** [/work/u-boot/scripts/Makefile.spl:527: spl/u-boot-spl] Error 1 make[1]: *** [/work/u-boot/Makefile:2071: spl/u-boot-spl] Error 2 make[1]: *** Waiting for unfinished jobs.... make[1]: Leaving directory '/tmp' make: *** [Makefile:177: sub-make] Error 2
The following config options are set CONFIG_DM_DEV_READ_INLINE=y
What happen is that is not set?
Michael
CONFIG_SUPPORT_OF_CONTROL=y
My understanding is that in case of spl build (Makefile.spl), the drivers/core/ofnode.o does not seem to be included thus causing the linking error.
Any suggestions how to fix this?
I've pushed the patches here https://github.com/rogerq/u-boot/commits/for-v2023.01/am64-nand-base-1.4
cheers, -roger
Michael
On Mon, Dec 12, 2022 at 10:27 AM Dario Binacchi dario.binacchi@amarulasolutions.com wrote:
Hi Roger,
On Mon, Dec 12, 2022 at 10:12 AM Roger Quadros rogerq@kernel.org wrote:
Hi Dario,
On 11/12/2022 15:56, Dario Binacchi wrote:
Hi Roger,
On Fri, Nov 25, 2022 at 1:38 PM Roger Quadros rogerq@kernel.org wrote:
Hi Michael,
On 08/11/2022 11:26, Michael Nazzareno Trimarchi wrote: > Hi Roger > > On Fri, Nov 4, 2022 at 2:27 PM Roger Quadros rogerq@kernel.org wrote: >> >> Hi, >> >> On 11/10/2022 14:49, Roger Quadros wrote: >>> Hi, >>> >>> This series adds driver model support for rawnand: omap_gpmc >>> and omap_elm drivers. >>> >>> This will enable the driver to be used on K2/K3 platforms as well. >> >> Any comments on patches 5 and later? Thanks >> > > We will try to close this week.
Could you please give your comments on the last few patches. Thanks!
cheers, -roger
> > Michael > >> >> cheers, >> -roger >> >>> >>> cheers, >>> -roger >>> >>> Roger Quadros (14): >>> mtd: rawnand: omap_gpmc: Deprecate asm/arch/mem.h >>> mtd: rawnand: omap_gpmc: Enable build for K2/K3 platforms >>> mtd: rawnand: omap_gpmc: Fix build warning on 64-bit platforms >>> mtd: rawnand: omap_gpmc: Optimize NAND reads >>> mtd: rawnand: omap_gpmc: Fix BCH6/16 HW based correction >>> mtd: rawnand: nand_base: Allow base driver to be used in SPL without >>> nand_bbt >>> mtd: rawnand: nand_spl_loaders: Fix cast type build warning >>> mtd: rawnand: omap_gpmc: Reduce .bss usage >>> dt-bindings: mtd: Add ti,gpmc-nand DT binding documentation >>> mtd: rawnand: omap_gpmc: support u-boot driver model >>> mtd: rawnand: omap_gpmc: Add SPL NAND support >>> mtd: rawnand: omap_gpmc: Enable SYS_NAND_PAGE_COUNT for OMAP_GPMC >>> dt-bindings: mtd: Add ti,elm DT binding documentation >>> mtd: rawnand: omap_elm: u-boot driver model support >>> >>> doc/device-tree-bindings/mtd/ti,elm.yaml | 72 +++ >>> .../mtd/ti,gpmc-nand.yaml | 129 +++++ >>> drivers/mtd/nand/raw/Kconfig | 11 +- >>> drivers/mtd/nand/raw/Makefile | 2 +- >>> drivers/mtd/nand/raw/nand_base.c | 18 +- >>> drivers/mtd/nand/raw/nand_spl_loaders.c | 2 +- >>> drivers/mtd/nand/raw/omap_elm.c | 33 +- >>> .../mtd => drivers/mtd/nand/raw}/omap_elm.h | 6 + >>> drivers/mtd/nand/raw/omap_gpmc.c | 500 +++++++++++++----- >>> 9 files changed, 637 insertions(+), 136 deletions(-) >>> create mode 100644 doc/device-tree-bindings/mtd/ti,elm.yaml >>> create mode 100644 doc/device-tree-bindings/mtd/ti,gpmc-nand.yaml >>> rename {include/linux/mtd => drivers/mtd/nand/raw}/omap_elm.h (97%) >>> > > >
I tried to merge your whole series but after the second fix and the third time the CI/CD pipeline failed
Do you have the link to the failure?
These are the CI/CD pipelines links: https://source.denx.de/u-boot/custodians/u-boot-nand-flash/-/jobs/540827 https://source.denx.de/u-boot/custodians/u-boot-nand-flash/-/jobs/540876 but I think you don't have permission to access them.
Anyway:
for https://source.denx.de/u-boot/custodians/u-boot-nand-flash/-/jobs/540827: +==================================================== 345 arm: + am335x_guardian 346+drivers/mtd/nand/raw/omap_gpmc.c:1208:26: error: 'nand_chip' defined but not used [-Werror=unused-variable] 347+ 1208 | static struct nand_chip *nand_chip; /* First NAND chip for SPL use only */ 348+ | ^~~~~~~~~ 349+cc1: all warnings being treated as errors 350+make[5]: *** [scripts/Makefile.build:258: drivers/mtd/nand/raw/omap_gpmc.o] Error 1 351+make[4]: *** [scripts/Makefile.build:398: drivers/mtd/nand/raw] Error 2 352+make[3]: *** [scripts/Makefile.build:398: drivers/mtd/nand] Error 2 353+make[2]: *** [scripts/Makefile.build:398: drivers/mtd] Error 2 354+make[1]: *** [Makefile:1871: drivers] Error 2 355+make: *** [Makefile:177: sub-make] Error 2
for https://source.denx.de/u-boot/custodians/u-boot-nand-flash/-/jobs/540876: +==================================================== 498 arm: + chiliboard 499+arm-linux-gnueabi-ld.bfd: drivers/mtd/nand/raw/nand.o: in function `nand_init_chip': 500+drivers/mtd/nand/raw/nand.c:92: undefined reference to `board_nand_init' 501+make[1]: *** [Makefile:1778: u-boot] Error 1 502+make: *** [Makefile:177: sub-make] Error 2 503 arm: w+ am335x_shc_netboot 504+===================== WARNING ====================== 505+This board does not use CONFIG_DM_I2C (Driver Model 506+for I2C drivers). Please update the board to use 507+CONFIG_DM_I2C before the v2022.04 release. Failure to 508+update by the deadline may result in board removal. 509+See doc/develop/driver-model/migration.rst for more info. 510+==================================================== 511 arm: + cm_t43 512+arm-linux-gnueabi-ld.bfd: drivers/mtd/nand/raw/nand.o: in function `nand_init_chip': 513+drivers/mtd/nand/raw/nand.c:92: undefined reference to `board_nand_init' 514+make[1]: *** [Makefile:1778: u-boot] Error 1 515+make: *** [Makefile:177: sub-make] Error 2 516 arm: w+ am335x_shc_sdboot
In both cases failed the "build all 32bit ARM platforms" test.
I think you have to run the command: ./tools/buildman/buildman -o /tmp -PEWM arm -x aarch64 if you have to run the tests locally.
Thanks and regards, Dario
I thought it's better you fix the problems. So, I only accepted some of the first few patches in the series: 01/14 mtd: rawnand: omap_gpmc: Deprecate asm/arch/mem.h 02/14 mtd: rawnand: omap_gpmc: Enable build for K2/K3 platforms 03/14 mtd: rawnand: omap_gpmc: Fix build warning on 64-bit platforms 04/14 mtd: rawnand: omap_gpmc: Optimize NAND reads 07/14 mtd: rawnand: nand_spl_loaders: Fix cast type build warning 08/14 mtd: rawnand: omap_gpmc: Reduce .bss usage
For the others, please fix them to run the tests successfully.
No problem. I will try to fix and run them through the CI testing myself before re-posting.
cheers, -roger
--
Dario Binacchi
Embedded Linux Developer
dario.binacchi@amarulasolutions.com
Amarula Solutions SRL
Via Le Canevare 30, 31100 Treviso, Veneto, IT
T. +39 042 243 5310 info@amarulasolutions.com
www.amarulasolutions.com