Re: [U-Boot] [PATCH 03/11] Blackfin: bf60x: add serial support

Dear Sonic Zhang,

In message 1360223258-6945-4-git-send-email-sonic.adi@gmail.com you wrote:

Add serial for bf60x.

There is a large number of checkpatch issues. Please fix!!

+/*

• • All Blackfin system MMRs are padded to 32bits even if the register
• • itself is only 16bits. So use a helper macro to streamline this.
• */

+#define __BFP(m) u16 m; u16 __pad_##m +struct bfin_mmr_serial { +#if BFIN_UART_HW_VER == 2

• __BFP(dll);
• __BFP(dlh);
• __BFP(gctl);
• __BFP(lcr);
• __BFP(mcr);
• __BFP(lsr);
• __BFP(msr);
• __BFP(scr);
• __BFP(ier_set);
• __BFP(ier_clear);
• __BFP(thr);
• __BFP(rbr);

+#else

• union {

• u16 dll;
  

• u16 thr;
  

• const u16 rbr;
  

• };
• const u16 __spad0;
• union {

• u16 dlh;
  

• u16 ier;
  

• };
• const u16 __spad1;
• const __BFP(iir);
• __BFP(lcr);
• __BFP(mcr);
• __BFP(lsr);
• __BFP(msr);
• __BFP(scr);
• const u32 __spad2;
• __BFP(gctl);

+#endif

Sorry, but this is totally unreadable.

+# define DO_MUX(port, mux_tx, mux_rx, tx, rx) \

• bfin_write_PORT##port##_MUX((bfin_read_PORT##port##_MUX() & ~(PORT_x_MUX_##mux_tx##_MASK | PORT_x_MUX_##mux_rx##_MASK)) | PORT_x_MUX_##mux_tx##_FUNC_1 | PORT_x_MUX_##mux_rx##_FUNC_1); \
• bfin_write_PORT##port##_FER(bfin_read_PORT##port##_FER() | P##port##tx | P##port##rx);
• switch (CONFIG_UART_CONSOLE) {
• case 0:

• DO_MUX(G, 7, 7, 12, 13);
  

• break;	/* Port G; mux 7; PG12 and PG13 */
  

• case 1:

• DO_MUX(F, 3, 3, 6, 7);
  

• break;	/* Port F; mux 3; PF6 and PF7 */
  

This is totally unreadable.

This needs serious fixing.

Best regards,

Wolfgang Denk