Lucas,
-----Original Message----- From: Lucas Stach [mailto:dev@lynxeye.de] Sent: Friday, January 25, 2013 7:41 AM To: u-boot@lists.denx.de Cc: Tom Warren; Marek Vasut; Simon Glass; Stephen Warren Subject: [PATCH v2 0/7] Move Tegra EHCI drive to correct place
This moves out the Tegra EHCI driver from a platform specific directory to the standard driver/usb/host dir.
This is a preparation needed to share this driver between Tegra20 and Tegra30. No functional change in here, so Tegra30 is still not working.
Patch 6 could be a lot smaller if it were generated with -B, as GIT would detect that most of it is moving stuff over, but last time I did this it prevented git apply to work. So sorry for the big diff.
I think I incorporated all changes needed to reflect the review feedback I got on this last time.
I expect this series to go in through the Tegra tree.
I tried to apply this to u-boot-tegra/next and it needed some massaging to get it to apply cleanly. Minor stuff, but you'll need to rebase it on top of current u-boot-tegra/next (I just pushed a new version with my 'Move common clock code' patch and Allen's fix for the DTS sort patch. Sorry, but the Tegra repo is going to be fairly dynamic for the next few weeks.
Also, when I did get it applied and tried to ./MAKEALL -s tegra20 -s tegra30, I got the following warning on all T20 builds:
ehci-tegra.c: In function 'ehci_hcd_init': ehci-tegra.c:565: warning: assignment makes pointer from integer without a cast ehci-tegra.c:566: warning: assignment makes pointer from integer without a cast
Also, it appears that arch-tegra20/usb.h is still hanging around (in my edited patch series, at any rate). Shouldn't the moved arch-tegra/usb.h be used exclusively? Removing arch-tegra20/usb.h causes fatal errors in nvidia/common/board.c. If it does need to exist, then it needs to live in arch-tegra30, also, so it'll be available when T30 gets USB turned on.
Tom
Lucas Stach (7): tegra: usb: set USB_PORTS_MAX to correct value tegra: usb: make controller init functions more self contained tegra: usb: remove unneeded function parameter tegra: usb: move controller init into start_port tegra: usb: various small cleanups tegra: usb: move implementation into right directory tegra: usb: move [start|stop]_port into ehci_hcd_[init|stop]
arch/arm/cpu/armv7/tegra20/Makefile | 1 - arch/arm/cpu/armv7/tegra20/usb.c | 567 --------------------- .../include/asm/{arch-tegra20 => arch-tegra}/usb.h | 22 - arch/arm/include/asm/arch-tegra20/tegra.h | 1 - arch/arm/include/asm/arch-tegra30/tegra.h | 2 + board/nvidia/common/board.c | 2 +- drivers/usb/host/ehci-tegra.c | 546 +++++++++++++++++++- 7 files changed, 533 insertions(+), 608 deletions(-) delete mode 100644 arch/arm/cpu/armv7/tegra20/usb.c rename arch/arm/include/asm/{arch-tegra20 => arch-tegra}/usb.h (89%)
-- 1.8.0.2 -- nvpublic