Wolfgang Denk wrote:
Dear George,
in message 3F61D58D.7090308@comcast.net you wrote:
Um, it's not the cross compiler that's doing it in this case. gccincdir is not defined for drivers/sk98lin. Try the attached patch. It WFM/YMMV.
Well, gccincdir is not needed for drivers/sk98lin/* - at least not with the compilers used in the ELDK.
Hm, that's odd. FWIW, I just tested:
ftp://ftp.leo.org/pub/eldk/2.1.0/eldk-arm-linux-x86
and it has the exact same build failure as:
ftp://ftp.arm.linux.org.uk/pub/armlinux/toolchain/cross-2.95.3.tar.bz2
Due to:
make[1]: Entering directory `/Projects/OSS/cvs.sourceforge.net/u-boot/u-boot/drivers/sk98lin' arm-linux-gcc ... -isystem /usr/lib/gcc-lib/i386-redhat-linux/2.96/include ... -c -o skge.o skge.c
W/o the patch. But I'm just being pedantic now. : )
Also, I seriously doubt if drivers/sk98lin is actually used by the omap1610inn board.
Correct, it's not used for omap1610inn board. But it gets built anyway and causes the build to fail due to "-isystem $(gccincdir)" where gccincdir is not explicitly defined and is probably just picking up a default from some builtin makerules or something?
-- Regards, George
--- drivers/sk98lin/Makefile.orig Fri Sep 12 10:15:26 2003 +++ drivers/sk98lin/Makefile Fri Sep 12 10:11:56 2003 @@ -25,6 +25,8 @@ # Makefile for the SysKonnect SK-98xx device driver. #
+include $(TOPDIR)/config.mk
But this patch is OK anyway. Thanks for the hint.
Best regards,
Wolfgang Denk