These boards have not been converted to generic board by the deadline. Remove dm355evm, dm355leopard, dm365evm, dm6467evm, dvevm, ea20, schmoogie, sffsdr, sonata.
Signed-off-by: Simon Glass sjg@chromium.org ---
arch/arm/mach-davinci/Kconfig | 36 ---- board/davinci/dm355evm/Kconfig | 12 -- board/davinci/dm355evm/MAINTAINERS | 6 - board/davinci/dm355evm/Makefile | 10 - board/davinci/dm355evm/config.mk | 11 - board/davinci/dm355evm/dm355evm.c | 144 ------------- board/davinci/dm355leopard/Kconfig | 12 -- board/davinci/dm355leopard/MAINTAINERS | 6 - board/davinci/dm355leopard/Makefile | 10 - board/davinci/dm355leopard/config.mk | 6 - board/davinci/dm355leopard/dm355leopard.c | 86 -------- board/davinci/dm365evm/Kconfig | 12 -- board/davinci/dm365evm/MAINTAINERS | 6 - board/davinci/dm365evm/Makefile | 10 - board/davinci/dm365evm/config.mk | 11 - board/davinci/dm365evm/dm365evm.c | 139 ------------ board/davinci/dm6467evm/Kconfig | 12 -- board/davinci/dm6467evm/MAINTAINERS | 7 - board/davinci/dm6467evm/Makefile | 10 - board/davinci/dm6467evm/config.mk | 2 - board/davinci/dm6467evm/dm6467evm.c | 76 ------- board/davinci/dvevm/Kconfig | 12 -- board/davinci/dvevm/MAINTAINERS | 6 - board/davinci/dvevm/Makefile | 11 - board/davinci/dvevm/board_init.S | 16 -- board/davinci/dvevm/config.mk | 39 ---- board/davinci/dvevm/dvevm.c | 91 -------- board/davinci/ea20/Kconfig | 12 -- board/davinci/ea20/MAINTAINERS | 6 - board/davinci/ea20/Makefile | 10 - board/davinci/ea20/ea20.c | 339 ------------------------------ board/davinci/schmoogie/Kconfig | 12 -- board/davinci/schmoogie/MAINTAINERS | 6 - board/davinci/schmoogie/Makefile | 11 - board/davinci/schmoogie/board_init.S | 16 -- board/davinci/schmoogie/config.mk | 39 ---- board/davinci/schmoogie/schmoogie.c | 119 ----------- board/davinci/sffsdr/Kconfig | 12 -- board/davinci/sffsdr/MAINTAINERS | 6 - board/davinci/sffsdr/Makefile | 11 - board/davinci/sffsdr/board_init.S | 16 -- board/davinci/sffsdr/config.mk | 23 -- board/davinci/sffsdr/sffsdr.c | 132 ------------ board/davinci/sonata/Kconfig | 12 -- board/davinci/sonata/MAINTAINERS | 6 - board/davinci/sonata/Makefile | 11 - board/davinci/sonata/board_init.S | 87 -------- board/davinci/sonata/config.mk | 39 ---- board/davinci/sonata/sonata.c | 87 -------- configs/davinci_dm355evm_defconfig | 9 - configs/davinci_dm355leopard_defconfig | 9 - configs/davinci_dm365evm_defconfig | 9 - configs/davinci_dm6467Tevm_defconfig | 9 - configs/davinci_dm6467evm_defconfig | 10 - configs/davinci_dvevm_defconfig | 9 - configs/davinci_schmoogie_defconfig | 9 - configs/davinci_sffsdr_defconfig | 9 - configs/davinci_sonata_defconfig | 7 - configs/ea20_defconfig | 8 - include/configs/davinci_dm355evm.h | 195 ----------------- include/configs/davinci_dm355leopard.h | 140 ------------ include/configs/davinci_dm365evm.h | 220 ------------------- include/configs/davinci_dm6467evm.h | 138 ------------ include/configs/davinci_dvevm.h | 216 ------------------- include/configs/davinci_schmoogie.h | 136 ------------ include/configs/davinci_sffsdr.h | 129 ------------ include/configs/davinci_sonata.h | 187 ---------------- include/configs/ea20.h | 308 --------------------------- 68 files changed, 3568 deletions(-) delete mode 100644 board/davinci/dm355evm/Kconfig delete mode 100644 board/davinci/dm355evm/MAINTAINERS delete mode 100644 board/davinci/dm355evm/Makefile delete mode 100644 board/davinci/dm355evm/config.mk delete mode 100644 board/davinci/dm355evm/dm355evm.c delete mode 100644 board/davinci/dm355leopard/Kconfig delete mode 100644 board/davinci/dm355leopard/MAINTAINERS delete mode 100644 board/davinci/dm355leopard/Makefile delete mode 100644 board/davinci/dm355leopard/config.mk delete mode 100644 board/davinci/dm355leopard/dm355leopard.c delete mode 100644 board/davinci/dm365evm/Kconfig delete mode 100644 board/davinci/dm365evm/MAINTAINERS delete mode 100644 board/davinci/dm365evm/Makefile delete mode 100644 board/davinci/dm365evm/config.mk delete mode 100644 board/davinci/dm365evm/dm365evm.c delete mode 100644 board/davinci/dm6467evm/Kconfig delete mode 100644 board/davinci/dm6467evm/MAINTAINERS delete mode 100644 board/davinci/dm6467evm/Makefile delete mode 100644 board/davinci/dm6467evm/config.mk delete mode 100644 board/davinci/dm6467evm/dm6467evm.c delete mode 100644 board/davinci/dvevm/Kconfig delete mode 100644 board/davinci/dvevm/MAINTAINERS delete mode 100644 board/davinci/dvevm/Makefile delete mode 100644 board/davinci/dvevm/board_init.S delete mode 100644 board/davinci/dvevm/config.mk delete mode 100644 board/davinci/dvevm/dvevm.c delete mode 100644 board/davinci/ea20/Kconfig delete mode 100644 board/davinci/ea20/MAINTAINERS delete mode 100644 board/davinci/ea20/Makefile delete mode 100644 board/davinci/ea20/ea20.c delete mode 100644 board/davinci/schmoogie/Kconfig delete mode 100644 board/davinci/schmoogie/MAINTAINERS delete mode 100644 board/davinci/schmoogie/Makefile delete mode 100644 board/davinci/schmoogie/board_init.S delete mode 100644 board/davinci/schmoogie/config.mk delete mode 100644 board/davinci/schmoogie/schmoogie.c delete mode 100644 board/davinci/sffsdr/Kconfig delete mode 100644 board/davinci/sffsdr/MAINTAINERS delete mode 100644 board/davinci/sffsdr/Makefile delete mode 100644 board/davinci/sffsdr/board_init.S delete mode 100644 board/davinci/sffsdr/config.mk delete mode 100644 board/davinci/sffsdr/sffsdr.c delete mode 100644 board/davinci/sonata/Kconfig delete mode 100644 board/davinci/sonata/MAINTAINERS delete mode 100644 board/davinci/sonata/Makefile delete mode 100644 board/davinci/sonata/board_init.S delete mode 100644 board/davinci/sonata/config.mk delete mode 100644 board/davinci/sonata/sonata.c delete mode 100644 configs/davinci_dm355evm_defconfig delete mode 100644 configs/davinci_dm355leopard_defconfig delete mode 100644 configs/davinci_dm365evm_defconfig delete mode 100644 configs/davinci_dm6467Tevm_defconfig delete mode 100644 configs/davinci_dm6467evm_defconfig delete mode 100644 configs/davinci_dvevm_defconfig delete mode 100644 configs/davinci_schmoogie_defconfig delete mode 100644 configs/davinci_sffsdr_defconfig delete mode 100644 configs/davinci_sonata_defconfig delete mode 100644 configs/ea20_defconfig delete mode 100644 include/configs/davinci_dm355evm.h delete mode 100644 include/configs/davinci_dm355leopard.h delete mode 100644 include/configs/davinci_dm365evm.h delete mode 100644 include/configs/davinci_dm6467evm.h delete mode 100644 include/configs/davinci_dvevm.h delete mode 100644 include/configs/davinci_schmoogie.h delete mode 100644 include/configs/davinci_sffsdr.h delete mode 100644 include/configs/davinci_sonata.h delete mode 100644 include/configs/ea20.h
diff --git a/arch/arm/mach-davinci/Kconfig b/arch/arm/mach-davinci/Kconfig index 681270d..790d177 100644 --- a/arch/arm/mach-davinci/Kconfig +++ b/arch/arm/mach-davinci/Kconfig @@ -22,33 +22,6 @@ config TARGET_OMAPL138_LCDK bool "OMAPL138 LCDK" select SUPPORT_SPL
-config TARGET_DAVINCI_DM355EVM - bool "DM355 EVM board" - -config TARGET_DAVINCI_DM355LEOPARD - bool "DM355 Leopard board" - -config TARGET_DAVINCI_DM365EVM - bool "DM365 EVM board" - -config TARGET_DAVINCI_DM6467EVM - bool "DM6467 EVM board" - -config TARGET_DAVINCI_DVEVM - bool "DVEVM board" - -config TARGET_EA20 - bool "EA20 board" - -config TARGET_DAVINCI_SCHMOOGIE - bool "Schmoogie board" - -config TARGET_DAVINCI_SFFSDR - bool "SFFSDR board" - -config TARGET_DAVINCI_SONATA - bool "Sonata board" - config TARGET_CALIMAIN bool "Calimain board"
@@ -60,15 +33,6 @@ config SYS_SOC source "board/enbw/enbw_cmc/Kconfig" source "board/Barix/ipam390/Kconfig" source "board/davinci/da8xxevm/Kconfig" -source "board/davinci/dm355evm/Kconfig" -source "board/davinci/dm355leopard/Kconfig" -source "board/davinci/dm365evm/Kconfig" -source "board/davinci/dm6467evm/Kconfig" -source "board/davinci/dvevm/Kconfig" -source "board/davinci/ea20/Kconfig" -source "board/davinci/schmoogie/Kconfig" -source "board/davinci/sffsdr/Kconfig" -source "board/davinci/sonata/Kconfig" source "board/omicron/calimain/Kconfig"
endif diff --git a/board/davinci/dm355evm/Kconfig b/board/davinci/dm355evm/Kconfig deleted file mode 100644 index ec2c276..0000000 --- a/board/davinci/dm355evm/Kconfig +++ /dev/null @@ -1,12 +0,0 @@ -if TARGET_DAVINCI_DM355EVM - -config SYS_BOARD - default "dm355evm" - -config SYS_VENDOR - default "davinci" - -config SYS_CONFIG_NAME - default "davinci_dm355evm" - -endif diff --git a/board/davinci/dm355evm/MAINTAINERS b/board/davinci/dm355evm/MAINTAINERS deleted file mode 100644 index c017e09..0000000 --- a/board/davinci/dm355evm/MAINTAINERS +++ /dev/null @@ -1,6 +0,0 @@ -DM355EVM BOARD -#M: Sandeep Paulraj s-paulraj@ti.com -S: Orphan (since 2014-08) -F: board/davinci/dm355evm/ -F: include/configs/davinci_dm355evm.h -F: configs/davinci_dm355evm_defconfig diff --git a/board/davinci/dm355evm/Makefile b/board/davinci/dm355evm/Makefile deleted file mode 100644 index bcb7e6f..0000000 --- a/board/davinci/dm355evm/Makefile +++ /dev/null @@ -1,10 +0,0 @@ -# -# (C) Copyright 2000, 2001, 2002 -# Wolfgang Denk, DENX Software Engineering, wd@denx.de. -# -# Copyright (C) 2007 Sergey Kubushyn ksi@koi8.net -# -# SPDX-License-Identifier: GPL-2.0+ -# - -obj-y := dm355evm.o diff --git a/board/davinci/dm355evm/config.mk b/board/davinci/dm355evm/config.mk deleted file mode 100644 index 9a06300..0000000 --- a/board/davinci/dm355evm/config.mk +++ /dev/null @@ -1,11 +0,0 @@ -# -# Spectrum Digital DM355 EVM board -# dm355evm board has 1 bank of 128 MB DDR RAM -# Physical Address: 8000'0000 to 8800'0000 -# -# Linux Kernel is expected to be at 8000'8000, entry 8000'8000 -# (mem base + reserved) -# - -#Provide at least 16MB spacing between us and the Linux Kernel image -CONFIG_SYS_TEXT_BASE = 0x81080000 diff --git a/board/davinci/dm355evm/dm355evm.c b/board/davinci/dm355evm/dm355evm.c deleted file mode 100644 index e5a958f..0000000 --- a/board/davinci/dm355evm/dm355evm.c +++ /dev/null @@ -1,144 +0,0 @@ -/* - * Copyright (C) 2009 David Brownell - * - * SPDX-License-Identifier: GPL-2.0+ - */ - -#include <common.h> -#include <nand.h> -#include <asm/io.h> -#include <asm/arch/hardware.h> -#include <asm/ti-common/davinci_nand.h> -#include <asm/arch/davinci_misc.h> -#include <net.h> -#include <netdev.h> -#ifdef CONFIG_DAVINCI_MMC -#include <mmc.h> -#include <asm/arch/sdmmc_defs.h> -#endif - -DECLARE_GLOBAL_DATA_PTR; - -/* - * With the DM355 EVM, u-boot is *always* a third stage loader, - * unless a JTAG debugger handles the first two stages: - * - * - 1st stage is ROM Boot Loader (RBL), which searches for a - * second stage loader in one of three places based on SW7: - * NAND (with MMC/SD fallback), MMC/SD, or UART. - * - * - 2nd stage is User Boot Loader (UBL), using at most 30KB - * of on-chip SRAM, responsible for lowlevel init, and for - * loading the third stage loader into DRAM. - * - * - 3rd stage, that's us! - */ - -int board_init(void) -{ - gd->bd->bi_arch_number = MACH_TYPE_DAVINCI_DM355_EVM; - gd->bd->bi_boot_params = PHYS_SDRAM_1 + 0x100; - - /* We expect the UBL to have handled "lowlevel init", which - * involves setting up at least: - * - clocks - * + PLL1 (for ARM and peripherals) and PLL2 (for DDR) - * + clock divisors for those PLLs - * + LPSC_DDR module enabled - * + LPSC_TIMER0 module (still) enabled - * - EMIF - * + DDR init and timings - * + AEMIF timings (for NAND and DM9000) - * - pinmux - * - * Some of that is repeated here, mostly as a precaution. - */ - - /* AEMIF: Some "address" lines are available as GPIOs. A3..A13 - * could be too if we used A12 as a GPIO during NAND chipselect - * (and Linux did too), letting us control the LED on A7/GPIO61. - */ - REG(PINMUX2) = 0x0c08; - - /* UART0 may still be in SyncReset if we didn't boot from UART */ - davinci_enable_uart0(); - - /* EDMA may be in SyncReset too; turn it on, Linux won't (yet) */ - lpsc_on(DAVINCI_LPSC_TPCC); - lpsc_on(DAVINCI_LPSC_TPTC0); - lpsc_on(DAVINCI_LPSC_TPTC1); - - return 0; -} - -#ifdef CONFIG_DRIVER_DM9000 -int board_eth_init(bd_t *bis) -{ - return dm9000_initialize(bis); -} -#endif - -#ifdef CONFIG_NAND_DAVINCI - -static void nand_dm355evm_select_chip(struct mtd_info *mtd, int chip) -{ - struct nand_chip *this = mtd->priv; - unsigned long wbase = (unsigned long) this->IO_ADDR_W; - unsigned long rbase = (unsigned long) this->IO_ADDR_R; - - if (chip == 1) { - __set_bit(14, &wbase); - __set_bit(14, &rbase); - } else { - __clear_bit(14, &wbase); - __clear_bit(14, &rbase); - } - this->IO_ADDR_W = (void *)wbase; - this->IO_ADDR_R = (void *)rbase; -} - -int board_nand_init(struct nand_chip *nand) -{ - davinci_nand_init(nand); - nand->select_chip = nand_dm355evm_select_chip; - return 0; -} - -#endif - -#ifdef CONFIG_DAVINCI_MMC -static struct davinci_mmc mmc_sd0 = { - .reg_base = (struct davinci_mmc_regs *)DAVINCI_MMC_SD0_BASE, - .input_clk = 108000000, - .host_caps = MMC_MODE_4BIT, - .voltages = MMC_VDD_32_33 | MMC_VDD_33_34, - .version = MMC_CTLR_VERSION_1, -}; - -#ifdef CONFIG_DAVINCI_MMC_SD1 -static struct davinci_mmc mmc_sd1 = { - .reg_base = (struct davinci_mmc_regs *)DAVINCI_MMC_SD1_BASE, - .input_clk = 108000000, - .host_caps = MMC_MODE_4BIT, - .voltages = MMC_VDD_32_33 | MMC_VDD_33_34, - .version = MMC_CTLR_VERSION_1, -}; -#endif - -int board_mmc_init(bd_t *bis) -{ - int err; - - /* Add slot-0 to mmc subsystem */ - err = davinci_mmc_init(bis, &mmc_sd0); - if (err) - return err; - -#ifdef CONFIG_DAVINCI_MMC_SD1 - /* Add slot-1 to mmc subsystem */ - err = davinci_mmc_init(bis, &mmc_sd1); -#endif - - return err; -} -#endif diff --git a/board/davinci/dm355leopard/Kconfig b/board/davinci/dm355leopard/Kconfig deleted file mode 100644 index ab4230a..0000000 --- a/board/davinci/dm355leopard/Kconfig +++ /dev/null @@ -1,12 +0,0 @@ -if TARGET_DAVINCI_DM355LEOPARD - -config SYS_BOARD - default "dm355leopard" - -config SYS_VENDOR - default "davinci" - -config SYS_CONFIG_NAME - default "davinci_dm355leopard" - -endif diff --git a/board/davinci/dm355leopard/MAINTAINERS b/board/davinci/dm355leopard/MAINTAINERS deleted file mode 100644 index ed04d43..0000000 --- a/board/davinci/dm355leopard/MAINTAINERS +++ /dev/null @@ -1,6 +0,0 @@ -DM355LEOPARD BOARD -#M: Sandeep Paulraj s-paulraj@ti.com -S: Orphan (since 2014-08) -F: board/davinci/dm355leopard/ -F: include/configs/davinci_dm355leopard.h -F: configs/davinci_dm355leopard_defconfig diff --git a/board/davinci/dm355leopard/Makefile b/board/davinci/dm355leopard/Makefile deleted file mode 100644 index 7035429..0000000 --- a/board/davinci/dm355leopard/Makefile +++ /dev/null @@ -1,10 +0,0 @@ -# -# (C) Copyright 2000, 2001, 2002 -# Wolfgang Denk, DENX Software Engineering, wd@denx.de. -# -# Copyright (C) 2007 Sergey Kubushyn ksi@koi8.net -# -# SPDX-License-Identifier: GPL-2.0+ -# - -obj-y := dm355leopard.o diff --git a/board/davinci/dm355leopard/config.mk b/board/davinci/dm355leopard/config.mk deleted file mode 100644 index 28ff3f3..0000000 --- a/board/davinci/dm355leopard/config.mk +++ /dev/null @@ -1,6 +0,0 @@ -# Linux Kernel is expected to be at 8000'8000, entry 8000'8000 -# (mem base + reserved) -# - -#Provide at least 16MB spacing between us and the Linux Kernel image -CONFIG_SYS_TEXT_BASE = 0x81080000 diff --git a/board/davinci/dm355leopard/dm355leopard.c b/board/davinci/dm355leopard/dm355leopard.c deleted file mode 100644 index 53902f9..0000000 --- a/board/davinci/dm355leopard/dm355leopard.c +++ /dev/null @@ -1,86 +0,0 @@ -/* - * Copyright (C) 2009 Texas Instruments Incorporated - * - * SPDX-License-Identifier: GPL-2.0+ - */ - -#include <common.h> -#include <nand.h> -#include <asm/io.h> -#include <asm/arch/hardware.h> -#include <asm/arch/gpio.h> -#include <asm/ti-common/davinci_nand.h> -#include <asm/arch/davinci_misc.h> -#include <net.h> -#include <netdev.h> - -DECLARE_GLOBAL_DATA_PTR; - -int board_init(void) -{ - struct davinci_gpio *gpio01_base = - (struct davinci_gpio *)DAVINCI_GPIO_BANK01; - struct davinci_gpio *gpio23_base = - (struct davinci_gpio *)DAVINCI_GPIO_BANK23; - struct davinci_gpio *gpio67_base = - (struct davinci_gpio *)DAVINCI_GPIO_BANK67; - - gd->bd->bi_arch_number = MACH_TYPE_DM355_LEOPARD; - gd->bd->bi_boot_params = PHYS_SDRAM_1 + 0x100; - - /* GIO 9 & 10 are used for IO */ - writel((readl(PINMUX3) & 0XF8FFFFFF), PINMUX3); - - /* Interrupt set GIO 9 */ - writel((readl(DAVINCI_GPIO_BINTEN) | 0x1), DAVINCI_GPIO_BINTEN); - - /* set GIO 9 input */ - writel((readl(&gpio01_base->dir) | (1 << 9)), &gpio01_base->dir); - - /* Both edge trigger GIO 9 */ - writel((readl(&gpio01_base->set_rising) | (1 << 9)), - &gpio01_base->set_rising); - writel((readl(&gpio01_base->dir) & ~(1 << 5)), &gpio01_base->dir); - - /* output low */ - writel((readl(&gpio01_base->set_data) & ~(1 << 5)), - &gpio01_base->set_data); - - /* set GIO 10 output */ - writel((readl(&gpio01_base->dir) & ~(1 << 10)), &gpio01_base->dir); - - /* output high */ - writel((readl(&gpio01_base->set_data) | (1 << 10)), - &gpio01_base->set_data); - - /* set GIO 32 output */ - writel((readl(&gpio23_base->dir) & ~(1 << 0)), &gpio23_base->dir); - - /* output High */ - writel((readl(&gpio23_base->set_data) | (1 << 0)), - &gpio23_base->set_data); - - /* Enable UART1 MUX Lines */ - writel((readl(PINMUX0) & ~3), PINMUX0); - writel((readl(&gpio67_base->dir) & ~(1 << 6)), &gpio67_base->dir); - writel((readl(&gpio67_base->set_data) | (1 << 6)), - &gpio67_base->set_data); - - return 0; -} - -#ifdef CONFIG_DRIVER_DM9000 -int board_eth_init(bd_t *bis) -{ - return dm9000_initialize(bis); -} -#endif - -#ifdef CONFIG_NAND_DAVINCI -int board_nand_init(struct nand_chip *nand) -{ - davinci_nand_init(nand); - - return 0; -} -#endif diff --git a/board/davinci/dm365evm/Kconfig b/board/davinci/dm365evm/Kconfig deleted file mode 100644 index 724c7b6..0000000 --- a/board/davinci/dm365evm/Kconfig +++ /dev/null @@ -1,12 +0,0 @@ -if TARGET_DAVINCI_DM365EVM - -config SYS_BOARD - default "dm365evm" - -config SYS_VENDOR - default "davinci" - -config SYS_CONFIG_NAME - default "davinci_dm365evm" - -endif diff --git a/board/davinci/dm365evm/MAINTAINERS b/board/davinci/dm365evm/MAINTAINERS deleted file mode 100644 index 97c3ed3..0000000 --- a/board/davinci/dm365evm/MAINTAINERS +++ /dev/null @@ -1,6 +0,0 @@ -DM365EVM BOARD -#M: Sandeep Paulraj s-paulraj@ti.com -S: Orphan (since 2014-08) -F: board/davinci/dm365evm/ -F: include/configs/davinci_dm365evm.h -F: configs/davinci_dm365evm_defconfig diff --git a/board/davinci/dm365evm/Makefile b/board/davinci/dm365evm/Makefile deleted file mode 100644 index d35d81c..0000000 --- a/board/davinci/dm365evm/Makefile +++ /dev/null @@ -1,10 +0,0 @@ -# -# (C) Copyright 2000, 2001, 2002 -# Wolfgang Denk, DENX Software Engineering, wd@denx.de. -# -# Copyright (C) 2007 Sergey Kubushyn ksi@koi8.net -# -# SPDX-License-Identifier: GPL-2.0+ -# - -obj-y := dm365evm.o diff --git a/board/davinci/dm365evm/config.mk b/board/davinci/dm365evm/config.mk deleted file mode 100644 index 7b1e900..0000000 --- a/board/davinci/dm365evm/config.mk +++ /dev/null @@ -1,11 +0,0 @@ -# -# Spectrum Digital DM365 EVM board -# DM365 EVM board has 1 bank of 128 MB DDR RAM -# Physical Address: 8000'0000 to 8800'0000 -# -# Linux Kernel is expected to be at 8000'8000, entry 8000'8000 -# (mem base + reserved) -# - -#Provide at least 16MB spacing between us and the Linux Kernel image -CONFIG_SYS_TEXT_BASE = 0x81080000 diff --git a/board/davinci/dm365evm/dm365evm.c b/board/davinci/dm365evm/dm365evm.c deleted file mode 100644 index 24bec56..0000000 --- a/board/davinci/dm365evm/dm365evm.c +++ /dev/null @@ -1,139 +0,0 @@ -/* - * Copyright (C) 2009 Texas Instruments Incorporated - * - * SPDX-License-Identifier: GPL-2.0+ - */ - -#include <common.h> -#include <nand.h> -#include <asm/io.h> -#include <asm/arch/hardware.h> -#include <asm/ti-common/davinci_nand.h> -#include <asm/arch/gpio.h> -#include <netdev.h> -#include <asm/arch/davinci_misc.h> -#ifdef CONFIG_DAVINCI_MMC -#include <mmc.h> -#include <asm/arch/sdmmc_defs.h> -#endif - -DECLARE_GLOBAL_DATA_PTR; - -int board_init(void) -{ - gd->bd->bi_arch_number = MACH_TYPE_DAVINCI_DM365_EVM; - gd->bd->bi_boot_params = PHYS_SDRAM_1 + 0x100; - - return 0; -} - -#ifdef CONFIG_DRIVER_TI_EMAC -int board_eth_init(bd_t *bis) -{ - uint8_t eeprom_enetaddr[6]; - int i; - struct davinci_gpio *gpio1_base = - (struct davinci_gpio *)DAVINCI_GPIO_BANK01; - - /* Configure PINMUX 3 to enable EMAC pins */ - writel((readl(PINMUX3) | 0x1affff), PINMUX3); - - /* Configure GPIO20 as output */ - writel((readl(&gpio1_base->dir) & ~(1 << 20)), &gpio1_base->dir); - - /* Toggle GPIO 20 */ - for (i = 0; i < 20; i++) { - /* GPIO 20 low */ - writel((readl(&gpio1_base->out_data) & ~(1 << 20)), - &gpio1_base->out_data); - - udelay(1000); - - /* GPIO 20 high */ - writel((readl(&gpio1_base->out_data) | (1 << 20)), - &gpio1_base->out_data); - } - - /* Configure I2C pins so that EEPROM can be read */ - writel((readl(PINMUX3) | 0x01400000), PINMUX3); - - /* Read Ethernet MAC address from EEPROM */ - if (dvevm_read_mac_address(eeprom_enetaddr)) - davinci_sync_env_enetaddr(eeprom_enetaddr); - - davinci_emac_initialize(); - - return 0; -} -#endif - -#ifdef CONFIG_NAND_DAVINCI -static void nand_dm365evm_select_chip(struct mtd_info *mtd, int chip) -{ - struct nand_chip *this = mtd->priv; - unsigned long wbase = (unsigned long) this->IO_ADDR_W; - unsigned long rbase = (unsigned long) this->IO_ADDR_R; - - if (chip == 1) { - __set_bit(14, &wbase); - __set_bit(14, &rbase); - } else { - __clear_bit(14, &wbase); - __clear_bit(14, &rbase); - } - this->IO_ADDR_W = (void *)wbase; - this->IO_ADDR_R = (void *)rbase; -} - -int board_nand_init(struct nand_chip *nand) -{ - davinci_nand_init(nand); - nand->select_chip = nand_dm365evm_select_chip; - return 0; -} -#endif - -#ifdef CONFIG_DAVINCI_MMC -static struct davinci_mmc mmc_sd0 = { - .reg_base = (struct davinci_mmc_regs *)DAVINCI_MMC_SD0_BASE, - .input_clk = 121500000, - .host_caps = MMC_MODE_4BIT, - .voltages = MMC_VDD_32_33 | MMC_VDD_33_34, - .version = MMC_CTLR_VERSION_2, -}; - -#ifdef CONFIG_DAVINCI_MMC_SD1 -static struct davinci_mmc mmc_sd1 = { - .reg_base = (struct davinci_mmc_regs *)DAVINCI_MMC_SD1_BASE, - .input_clk = 121500000, - .host_caps = MMC_MODE_4BIT, - .voltages = MMC_VDD_32_33 | MMC_VDD_33_34, - .version = MMC_CTLR_VERSION_2, -}; -#endif - -int board_mmc_init(bd_t *bis) -{ - int err; - - /* Add slot-0 to mmc subsystem */ - err = davinci_mmc_init(bis, &mmc_sd0); - if (err) - return err; - -#ifdef CONFIG_DAVINCI_MMC_SD1 -#define PUPDCTL1 0x01c4007c - /* PINMUX(4)-DAT0-3/CMD; PINMUX(0)-CLK */ - writel((readl(PINMUX4) | 0x55400000), PINMUX4); - writel((readl(PINMUX0) | 0x00010000), PINMUX0); - - /* Configure MMC/SD pins as pullup */ - writel((readl(PUPDCTL1) & ~0x07c0), PUPDCTL1); - - /* Add slot-1 to mmc subsystem */ - err = davinci_mmc_init(bis, &mmc_sd1); -#endif - - return err; -} -#endif diff --git a/board/davinci/dm6467evm/Kconfig b/board/davinci/dm6467evm/Kconfig deleted file mode 100644 index 56d2ab4..0000000 --- a/board/davinci/dm6467evm/Kconfig +++ /dev/null @@ -1,12 +0,0 @@ -if TARGET_DAVINCI_DM6467EVM - -config SYS_BOARD - default "dm6467evm" - -config SYS_VENDOR - default "davinci" - -config SYS_CONFIG_NAME - default "davinci_dm6467evm" - -endif diff --git a/board/davinci/dm6467evm/MAINTAINERS b/board/davinci/dm6467evm/MAINTAINERS deleted file mode 100644 index 8ca53c4..0000000 --- a/board/davinci/dm6467evm/MAINTAINERS +++ /dev/null @@ -1,7 +0,0 @@ -DM6467EVM BOARD -#M: Sandeep Paulraj s-paulraj@ti.com -S: Orphan (since 2014-08) -F: board/davinci/dm6467evm/ -F: include/configs/davinci_dm6467evm.h -F: configs/davinci_dm6467evm_defconfig -F: configs/davinci_dm6467Tevm_defconfig diff --git a/board/davinci/dm6467evm/Makefile b/board/davinci/dm6467evm/Makefile deleted file mode 100644 index acbbdd5..0000000 --- a/board/davinci/dm6467evm/Makefile +++ /dev/null @@ -1,10 +0,0 @@ -# -# (C) Copyright 2000, 2001, 2002 -# Wolfgang Denk, DENX Software Engineering, wd@denx.de. -# -# Copyright (C) 2007 Sergey Kubushyn ksi@koi8.net -# -# SPDX-License-Identifier: GPL-2.0+ -# - -obj-y := dm6467evm.o diff --git a/board/davinci/dm6467evm/config.mk b/board/davinci/dm6467evm/config.mk deleted file mode 100644 index 3751043..0000000 --- a/board/davinci/dm6467evm/config.mk +++ /dev/null @@ -1,2 +0,0 @@ -#Provide at least 16MB spacing between us and the Linux Kernel image -CONFIG_SYS_TEXT_BASE = 0x81080000 diff --git a/board/davinci/dm6467evm/dm6467evm.c b/board/davinci/dm6467evm/dm6467evm.c deleted file mode 100644 index e51cc9e..0000000 --- a/board/davinci/dm6467evm/dm6467evm.c +++ /dev/null @@ -1,76 +0,0 @@ -/* - * Copyright (C) 2009 Texas Instruments Incorporated - * - * SPDX-License-Identifier: GPL-2.0+ - */ - -#include <common.h> -#include <netdev.h> -#include <asm/io.h> -#include <nand.h> -#include <asm/arch/hardware.h> -#include <asm/ti-common/davinci_nand.h> - -DECLARE_GLOBAL_DATA_PTR; - -#define REV_DM6467EVM 0 -#define REV_DM6467TEVM 1 -/* - * get_board_rev() - setup to pass kernel board revision information - * Returns: - * bit[0-3] System clock frequency - * 0000b - 27 MHz - * 0001b - 33 MHz - */ -u32 get_board_rev(void) -{ - -#ifdef CONFIG_DAVINCI_DM6467TEVM - return REV_DM6467TEVM; -#else - return REV_DM6467EVM; -#endif - -} - -int board_init(void) -{ - gd->bd->bi_arch_number = MACH_TYPE_DAVINCI_DM6467_EVM; - gd->bd->bi_boot_params = PHYS_SDRAM_1 + 0x100; - - lpsc_on(DAVINCI_DM646X_LPSC_TIMER0); - lpsc_on(DAVINCI_DM646X_LPSC_UART0); - lpsc_on(DAVINCI_DM646X_LPSC_I2C); - lpsc_on(DAVINCI_DM646X_LPSC_EMAC); - - /* Enable GIO3.3V cells used for EMAC */ - REG(VDD3P3V_PWDN) = 0x80000c0; - - /* Select UART function on UART0 */ - REG(PINMUX0) &= ~(0x0000003f << 18); - REG(PINMUX1) &= ~(0x00000003); - - return 0; -} - -#if defined(CONFIG_DRIVER_TI_EMAC) - -int board_eth_init(bd_t *bis) -{ - if (!davinci_emac_initialize()) { - printf("Error: Ethernet init failed!\n"); - return -1; - } - - return 0; -} -#endif /* CONFIG_DRIVER_TI_EMAC */ - -#ifdef CONFIG_NAND_DAVINCI -int board_nand_init(struct nand_chip *nand) -{ - davinci_nand_init(nand); - - return 0; -} -#endif diff --git a/board/davinci/dvevm/Kconfig b/board/davinci/dvevm/Kconfig deleted file mode 100644 index 3f0ef82..0000000 --- a/board/davinci/dvevm/Kconfig +++ /dev/null @@ -1,12 +0,0 @@ -if TARGET_DAVINCI_DVEVM - -config SYS_BOARD - default "dvevm" - -config SYS_VENDOR - default "davinci" - -config SYS_CONFIG_NAME - default "davinci_dvevm" - -endif diff --git a/board/davinci/dvevm/MAINTAINERS b/board/davinci/dvevm/MAINTAINERS deleted file mode 100644 index a718b90..0000000 --- a/board/davinci/dvevm/MAINTAINERS +++ /dev/null @@ -1,6 +0,0 @@ -DVEVM BOARD -#M: - -S: Maintained -F: board/davinci/dvevm/ -F: include/configs/davinci_dvevm.h -F: configs/davinci_dvevm_defconfig diff --git a/board/davinci/dvevm/Makefile b/board/davinci/dvevm/Makefile deleted file mode 100644 index 7ade325..0000000 --- a/board/davinci/dvevm/Makefile +++ /dev/null @@ -1,11 +0,0 @@ -# -# (C) Copyright 2000, 2001, 2002 -# Wolfgang Denk, DENX Software Engineering, wd@denx.de. -# -# Copyright (C) 2007 Sergey Kubushyn ksi@koi8.net -# -# SPDX-License-Identifier: GPL-2.0+ -# - -obj-y := dvevm.o -obj-y += board_init.o diff --git a/board/davinci/dvevm/board_init.S b/board/davinci/dvevm/board_init.S deleted file mode 100644 index ded0590..0000000 --- a/board/davinci/dvevm/board_init.S +++ /dev/null @@ -1,16 +0,0 @@ -/* - * Copyright (C) 2007 Sergey Kubushyn ksi@koi8.net - * - * Board-specific low level initialization code. Called at the very end - * of arch/arm/cpu/arm926ejs/davinci/lowlevel_init.S. Just returns if there is no - * initialization required. - * - * SPDX-License-Identifier: GPL-2.0+ - */ - -#include <config.h> - -.globl dv_board_init -dv_board_init: - - mov pc, lr diff --git a/board/davinci/dvevm/config.mk b/board/davinci/dvevm/config.mk deleted file mode 100644 index ed80707..0000000 --- a/board/davinci/dvevm/config.mk +++ /dev/null @@ -1,39 +0,0 @@ -# -# (C) Copyright 2002 -# Gary Jennejohn, DENX Software Engineering, garyj@denx.de -# David Mueller, ELSOFT AG, d.mueller@elsoft.ch -# -# (C) Copyright 2003 -# Texas Instruments, <www.ti.com> -# Swaminathan swami.iyer@ti.com -# -# Davinci EVM board (ARM925EJS) cpu -# see http://www.ti.com/ for more information on Texas Instruments -# -# Davinci EVM has 1 bank of 256 MB DDR RAM -# Physical Address: -# 8000'0000 to 9000'0000 -# -# Copyright (C) 2007 Sergey Kubushyn ksi@koi8.net -# -# Visioneering Corp. Sonata board (ARM926EJS) cpu -# -# Sonata board has 1 bank of 128 MB DDR RAM -# Physical Address: -# 8000'0000 to 8800'0000 -# -# Razorstream, LLC. SCHMOOGIE board (ARM926EJS) cpu -# -# Schmoogie board has 1 bank of 128 MB DDR RAM -# Physical Address: -# 8000'0000 to 8800'0000 -# -# Linux-Kernel is expected to be at 8000'8000, entry 8000'8000 -# (mem base + reserved) -# -# we load ourself to 8108 '0000 -# -# - -#Provide at least 16MB spacing between us and the Linux Kernel image -CONFIG_SYS_TEXT_BASE = 0x81080000 diff --git a/board/davinci/dvevm/dvevm.c b/board/davinci/dvevm/dvevm.c deleted file mode 100644 index c34bde4..0000000 --- a/board/davinci/dvevm/dvevm.c +++ /dev/null @@ -1,91 +0,0 @@ -/* - * Copyright (C) 2007 Sergey Kubushyn ksi@koi8.net - * - * Parts are shamelessly stolen from various TI sources, original copyright - * follows: - * ----------------------------------------------------------------- - * - * Copyright (C) 2004 Texas Instruments. - * - * ---------------------------------------------------------------------------- - * SPDX-License-Identifier: GPL-2.0+ - * ---------------------------------------------------------------------------- - */ - -#include <common.h> -#include <i2c.h> -#include <asm/arch/hardware.h> -#include <asm/arch/davinci_misc.h> - -DECLARE_GLOBAL_DATA_PTR; - -int board_init(void) -{ - /* arch number of the board */ - gd->bd->bi_arch_number = MACH_TYPE_DAVINCI_EVM; - - /* address of boot parameters */ - gd->bd->bi_boot_params = LINUX_BOOT_PARAM_ADDR; - - /* Configure AEMIF pins (although this should be configured at boot time - * with pull-up/pull-down resistors) */ - REG(PINMUX0) = 0x00000c1f; - - davinci_errata_workarounds(); - - /* Power on required peripherals */ - lpsc_on(DAVINCI_LPSC_GPIO); - lpsc_on(DAVINCI_LPSC_USB); - -#if !defined(CONFIG_SYS_USE_DSPLINK) - /* Powerup the DSP */ - dsp_on(); -#endif /* CONFIG_SYS_USE_DSPLINK */ - - davinci_enable_uart0(); - davinci_enable_emac(); - davinci_enable_i2c(); - - lpsc_on(DAVINCI_LPSC_TIMER1); - timer_init(); - - return(0); -} - -int misc_init_r(void) -{ - uint8_t video_mode; - uint8_t eeprom_enetaddr[6]; - - /* Read Ethernet MAC address from EEPROM if available. */ - if (dvevm_read_mac_address(eeprom_enetaddr)) - davinci_sync_env_enetaddr(eeprom_enetaddr); - - i2c_read(0x39, 0x00, 1, &video_mode, 1); - - setenv("videostd", ((video_mode & 0x80) ? "pal" : "ntsc")); - - return(0); -} - -#ifdef CONFIG_USB_DAVINCI - -/* IO Expander I2C address and USB VBUS enable mask */ -#define IOEXP_I2C_ADDR 0x3A -#define IOEXP_VBUSEN_MASK 1 - -/* - * This function enables USB VBUS by writting to IO expander using I2C. - * Note that the I2C is already initialized at this stage. This - * function is used by davinci specific USB wrapper code. - */ -void enable_vbus(void) -{ - uchar data; /* IO Expander data to enable VBUS */ - - /* Write to IO expander to enable VBUS */ - i2c_read(IOEXP_I2C_ADDR, 0, 0, &data, 1); - data &= ~IOEXP_VBUSEN_MASK; - i2c_write(IOEXP_I2C_ADDR, 0, 0, &data, 1); -} -#endif diff --git a/board/davinci/ea20/Kconfig b/board/davinci/ea20/Kconfig deleted file mode 100644 index ae5b16e..0000000 --- a/board/davinci/ea20/Kconfig +++ /dev/null @@ -1,12 +0,0 @@ -if TARGET_EA20 - -config SYS_BOARD - default "ea20" - -config SYS_VENDOR - default "davinci" - -config SYS_CONFIG_NAME - default "ea20" - -endif diff --git a/board/davinci/ea20/MAINTAINERS b/board/davinci/ea20/MAINTAINERS deleted file mode 100644 index 5c300a3..0000000 --- a/board/davinci/ea20/MAINTAINERS +++ /dev/null @@ -1,6 +0,0 @@ -EA20 BOARD -M: Stefano Babic sbabic@denx.de -S: Maintained -F: board/davinci/ea20/ -F: include/configs/ea20.h -F: configs/ea20_defconfig diff --git a/board/davinci/ea20/Makefile b/board/davinci/ea20/Makefile deleted file mode 100644 index a5311c4..0000000 --- a/board/davinci/ea20/Makefile +++ /dev/null @@ -1,10 +0,0 @@ -# -# (C) Copyright 2000, 2001, 2002 -# Wolfgang Denk, DENX Software Engineering, wd@denx.de. -# -# Copyright (C) 2007 Sergey Kubushyn ksi@koi8.net -# -# SPDX-License-Identifier: GPL-2.0+ -# - -obj-y += ea20.o diff --git a/board/davinci/ea20/ea20.c b/board/davinci/ea20/ea20.c deleted file mode 100644 index 66804d7..0000000 --- a/board/davinci/ea20/ea20.c +++ /dev/null @@ -1,339 +0,0 @@ -/* - * (C) Copyright 2010 - * Stefano Babic, DENX Software Engineering, sbabic@denx.de - * - * Based on da850evm.c, original Copyrights follow: - * - * Copyright (C) 2010 Texas Instruments Incorporated - http://www.ti.com/ - * - * Based on da830evm.c. Original Copyrights follow: - * - * Copyright (C) 2009 Nick Thompson, GE Fanuc, Ltd. nick.thompson@gefanuc.com - * Copyright (C) 2007 Sergey Kubushyn ksi@koi8.net - * - * SPDX-License-Identifier: GPL-2.0+ - */ - -#include <common.h> -#include <i2c.h> -#include <net.h> -#include <netdev.h> -#include <asm/arch/hardware.h> -#include <asm/ti-common/davinci_nand.h> -#include <asm/arch/emac_defs.h> -#include <asm/io.h> -#include <asm/arch/davinci_misc.h> -#include <asm/gpio.h> -#include "../../../drivers/video/da8xx-fb.h" - -DECLARE_GLOBAL_DATA_PTR; - -static const struct da8xx_panel lcd_panel = { - /* Casio COM57H531x */ - .name = "Casio_COM57H531x", - .width = 640, - .height = 480, - .hfp = 12, - .hbp = 144, - .hsw = 30, - .vfp = 10, - .vbp = 35, - .vsw = 3, - .pxl_clk = 25000000, - .invert_pxl_clk = 0, -}; - -static const struct display_panel disp_panel = { - QVGA, - 16, - 16, - COLOR_ACTIVE, -}; - -static const struct lcd_ctrl_config lcd_cfg = { - &disp_panel, - .ac_bias = 255, - .ac_bias_intrpt = 0, - .dma_burst_sz = 16, - .bpp = 16, - .fdd = 255, - .tft_alt_mode = 0, - .stn_565_mode = 0, - .mono_8bit_mode = 0, - .invert_line_clock = 1, - .invert_frm_clock = 1, - .sync_edge = 0, - .sync_ctrl = 1, - .raster_order = 0, -}; - -/* SPI0 pin muxer settings */ -static const struct pinmux_config spi1_pins[] = { - { pinmux(5), 1, 1 }, - { pinmux(5), 1, 2 }, - { pinmux(5), 1, 4 }, - { pinmux(5), 1, 5 } -}; - -/* I2C pin muxer settings */ -static const struct pinmux_config i2c_pins[] = { - { pinmux(4), 2, 2 }, - { pinmux(4), 2, 3 } -}; - -/* UART0 pin muxer settings */ -static const struct pinmux_config uart_pins[] = { - { pinmux(3), 2, 7 }, - { pinmux(3), 2, 6 }, - { pinmux(3), 2, 4 }, - { pinmux(3), 2, 5 } -}; - -#ifdef CONFIG_DRIVER_TI_EMAC -#define HAS_RMII 1 -static const struct pinmux_config emac_pins[] = { - { pinmux(14), 8, 2 }, - { pinmux(14), 8, 3 }, - { pinmux(14), 8, 4 }, - { pinmux(14), 8, 5 }, - { pinmux(14), 8, 6 }, - { pinmux(14), 8, 7 }, - { pinmux(15), 8, 1 }, - { pinmux(4), 8, 0 }, - { pinmux(4), 8, 1 } -}; -#endif - -#ifdef CONFIG_NAND_DAVINCI -const struct pinmux_config nand_pins[] = { - { pinmux(7), 1, 0}, /* CS2 */ - { pinmux(7), 0, 1}, /* CS3 in three state*/ - { pinmux(7), 1, 4 }, /* EMA_WE */ - { pinmux(7), 1, 5 }, /* EMA_OE */ - { pinmux(9), 1, 0 }, /* EMA_D[7] */ - { pinmux(9), 1, 1 }, /* EMA_D[6] */ - { pinmux(9), 1, 2 }, /* EMA_D[5] */ - { pinmux(9), 1, 3 }, /* EMA_D[4] */ - { pinmux(9), 1, 4 }, /* EMA_D[3] */ - { pinmux(9), 1, 5 }, /* EMA_D[2] */ - { pinmux(9), 1, 6 }, /* EMA_D[1] */ - { pinmux(9), 1, 7 }, /* EMA_D[0] */ - { pinmux(12), 1, 5 }, /* EMA_A[2] */ - { pinmux(12), 1, 6 }, /* EMA_A[1] */ - { pinmux(6), 1, 0 } /* EMA_CLK */ -}; -#endif - -const struct pinmux_config gpio_pins[] = { - { pinmux(13), 8, 0 }, /* GPIO6[15] RESETOUTn on SOM*/ - { pinmux(13), 8, 5 }, /* GPIO6[10] U0_SW0 on EA20-00101_2*/ - { pinmux(13), 8, 3 }, /* GPIO6[12] U0_SW1 on EA20-00101_2*/ - { pinmux(19), 8, 5 }, /* GPIO6[1] DISP_ON */ - { pinmux(14), 8, 1 } /* GPIO6[6] LCD_B_PWR*/ -}; - -const struct pinmux_config lcd_pins[] = { - { pinmux(17), 2, 1 }, /* LCD_D_0 */ - { pinmux(17), 2, 0 }, /* LCD_D_1 */ - { pinmux(16), 2, 7 }, /* LCD_D_2 */ - { pinmux(16), 2, 6 }, /* LCD_D_3 */ - { pinmux(16), 2, 5 }, /* LCD_D_4 */ - { pinmux(16), 2, 4 }, /* LCD_D_5 */ - { pinmux(16), 2, 3 }, /* LCD_D_6 */ - { pinmux(16), 2, 2 }, /* LCD_D_7 */ - { pinmux(18), 2, 1 }, /* LCD_D_8 */ - { pinmux(18), 2, 0 }, /* LCD_D_9 */ - { pinmux(17), 2, 7 }, /* LCD_D_10 */ - { pinmux(17), 2, 6 }, /* LCD_D_11 */ - { pinmux(17), 2, 5 }, /* LCD_D_12 */ - { pinmux(17), 2, 4 }, /* LCD_D_13 */ - { pinmux(17), 2, 3 }, /* LCD_D_14 */ - { pinmux(17), 2, 2 }, /* LCD_D_15 */ - { pinmux(18), 2, 6 }, /* LCD_PCLK */ - { pinmux(19), 2, 0 }, /* LCD_HSYNC */ - { pinmux(19), 2, 1 }, /* LCD_VSYNC */ - { pinmux(19), 2, 6 }, /* DA850_NLCD_AC_ENB_CS */ -}; - -const struct pinmux_config halten_pin[] = { - { pinmux(3), 4, 2 } /* GPIO8[6] HALTEN */ -}; - -static const struct pinmux_resource pinmuxes[] = { -#ifdef CONFIG_SPI_FLASH - PINMUX_ITEM(spi1_pins), -#endif - PINMUX_ITEM(uart_pins), - PINMUX_ITEM(i2c_pins), -#ifdef CONFIG_NAND_DAVINCI - PINMUX_ITEM(nand_pins), -#endif -#ifdef CONFIG_VIDEO - PINMUX_ITEM(lcd_pins), -#endif -}; - -static const struct lpsc_resource lpsc[] = { - { DAVINCI_LPSC_AEMIF }, /* NAND, NOR */ - { DAVINCI_LPSC_SPI1 }, /* Serial Flash */ - { DAVINCI_LPSC_EMAC }, /* image download */ - { DAVINCI_LPSC_UART0 }, /* console */ - { DAVINCI_LPSC_GPIO }, - { DAVINCI_LPSC_LCDC }, /* LCD */ -}; - -int board_early_init_f(void) -{ - /* PinMux for GPIO */ - if (davinci_configure_pin_mux(gpio_pins, ARRAY_SIZE(gpio_pins)) != 0) - return 1; - - /* Set DISP_ON high to enable LCD output*/ - gpio_direction_output(97, 1); - - /* Set the RESETOUTn low */ - gpio_direction_output(111, 0); - - /* Set U0_SW0 low for UART0 as console*/ - gpio_direction_output(106, 0); - - /* Set U0_SW1 low for UART0 as console*/ - gpio_direction_output(108, 0); - - /* Set LCD_B_PWR low to power down LCD Backlight*/ - gpio_direction_output(102, 0); - -#ifndef CONFIG_USE_IRQ - irq_init(); -#endif - - /* - * NAND CS setup - cycle counts based on da850evm NAND timings in the - * Linux kernel @ 25MHz EMIFA - */ -#ifdef CONFIG_NAND_DAVINCI - writel((DAVINCI_ABCR_WSETUP(0) | - DAVINCI_ABCR_WSTROBE(1) | - DAVINCI_ABCR_WHOLD(0) | - DAVINCI_ABCR_RSETUP(0) | - DAVINCI_ABCR_RSTROBE(1) | - DAVINCI_ABCR_RHOLD(0) | - DAVINCI_ABCR_TA(0) | - DAVINCI_ABCR_ASIZE_8BIT), - &davinci_emif_regs->ab1cr); /* CS2 */ -#endif - - /* - * Power on required peripherals - * ARM does not have access by default to PSC0 and PSC1 - * assuming here that the DSP bootloader has set the IOPU - * such that PSC access is available to ARM - */ - if (da8xx_configure_lpsc_items(lpsc, ARRAY_SIZE(lpsc))) - return 1; - - /* setup the SUSPSRC for ARM to control emulation suspend */ - writel(readl(&davinci_syscfg_regs->suspsrc) & - ~(DAVINCI_SYSCFG_SUSPSRC_EMAC | DAVINCI_SYSCFG_SUSPSRC_I2C | - DAVINCI_SYSCFG_SUSPSRC_SPI1 | DAVINCI_SYSCFG_SUSPSRC_TIMER0 | - DAVINCI_SYSCFG_SUSPSRC_UART0), - &davinci_syscfg_regs->suspsrc); - - /* configure pinmux settings */ - if (davinci_configure_pin_mux_items(pinmuxes, ARRAY_SIZE(pinmuxes))) - return 1; - -#ifdef CONFIG_DRIVER_TI_EMAC - if (davinci_configure_pin_mux(emac_pins, ARRAY_SIZE(emac_pins)) != 0) - return 1; - - davinci_emac_mii_mode_sel(HAS_RMII); -#endif /* CONFIG_DRIVER_TI_EMAC */ - - /* enable the console UART */ - writel((DAVINCI_UART_PWREMU_MGMT_FREE | DAVINCI_UART_PWREMU_MGMT_URRST | - DAVINCI_UART_PWREMU_MGMT_UTRST), - &davinci_uart0_ctrl_regs->pwremu_mgmt); - - /* - * Reconfigure the LCDC priority to the highest to ensure that - * the throughput/latency requirements for the LCDC are met. - */ - writel(readl(&davinci_syscfg_regs->mstpri[2]) & 0x0fffffff, - &davinci_syscfg_regs->mstpri[2]); - - - return 0; -} - -/* - * Do not overwrite the console - * Use always serial for U-Boot console - */ -int overwrite_console(void) -{ - return 1; -} - -int board_init(void) -{ - /* arch number of the board */ - gd->bd->bi_arch_number = MACH_TYPE_EA20; - - /* address of boot parameters */ - gd->bd->bi_boot_params = LINUX_BOOT_PARAM_ADDR; - - da8xx_video_init(&lcd_panel, &lcd_cfg, 16); - - return 0; -} - -#ifdef CONFIG_BOARD_LATE_INIT - -int board_late_init(void) -{ - unsigned char buf[2]; - int ret; - - /* PinMux for HALTEN */ - if (davinci_configure_pin_mux(halten_pin, ARRAY_SIZE(halten_pin)) != 0) - return 1; - - /* Set HALTEN to high */ - gpio_direction_output(134, 1); - - /* Set fixed contrast settings for LCD via I2C potentiometer */ - buf[0] = 0x00; - buf[1] = 0xd7; - ret = i2c_write(0x2e, 6, 1, buf, 2); - if (ret) - puts("\nContrast Settings FAILED\n"); - - /* Set LCD_B_PWR high to power up LCD Backlight*/ - gpio_set_value(102, 1); - return 0; -} -#endif /* CONFIG_BOARD_LATE_INIT */ - -#ifdef CONFIG_DRIVER_TI_EMAC - -/* - * Initializes on-board ethernet controllers. - */ -int board_eth_init(bd_t *bis) -{ - if (!davinci_emac_initialize()) { - printf("Error: Ethernet init failed!\n"); - return -1; - } - - /* - * This board has a RMII PHY. However, the MDC line on the SOM - * must not be disabled (there is no MII PHY on the - * baseboard) via the GPIO2[6], because this pin - * disables at the same time the SPI flash. - */ - - return 0; -} -#endif /* CONFIG_DRIVER_TI_EMAC */ diff --git a/board/davinci/schmoogie/Kconfig b/board/davinci/schmoogie/Kconfig deleted file mode 100644 index 3581075..0000000 --- a/board/davinci/schmoogie/Kconfig +++ /dev/null @@ -1,12 +0,0 @@ -if TARGET_DAVINCI_SCHMOOGIE - -config SYS_BOARD - default "schmoogie" - -config SYS_VENDOR - default "davinci" - -config SYS_CONFIG_NAME - default "davinci_schmoogie" - -endif diff --git a/board/davinci/schmoogie/MAINTAINERS b/board/davinci/schmoogie/MAINTAINERS deleted file mode 100644 index 808e7fc..0000000 --- a/board/davinci/schmoogie/MAINTAINERS +++ /dev/null @@ -1,6 +0,0 @@ -SCHMOOGIE BOARD -#M: - -S: Maintained -F: board/davinci/schmoogie/ -F: include/configs/davinci_schmoogie.h -F: configs/davinci_schmoogie_defconfig diff --git a/board/davinci/schmoogie/Makefile b/board/davinci/schmoogie/Makefile deleted file mode 100644 index e170d55..0000000 --- a/board/davinci/schmoogie/Makefile +++ /dev/null @@ -1,11 +0,0 @@ -# -# (C) Copyright 2000, 2001, 2002 -# Wolfgang Denk, DENX Software Engineering, wd@denx.de. -# -# Copyright (C) 2007 Sergey Kubushyn ksi@koi8.net -# -# SPDX-License-Identifier: GPL-2.0+ -# - -obj-y := schmoogie.o -obj-y += board_init.o diff --git a/board/davinci/schmoogie/board_init.S b/board/davinci/schmoogie/board_init.S deleted file mode 100644 index ded0590..0000000 --- a/board/davinci/schmoogie/board_init.S +++ /dev/null @@ -1,16 +0,0 @@ -/* - * Copyright (C) 2007 Sergey Kubushyn ksi@koi8.net - * - * Board-specific low level initialization code. Called at the very end - * of arch/arm/cpu/arm926ejs/davinci/lowlevel_init.S. Just returns if there is no - * initialization required. - * - * SPDX-License-Identifier: GPL-2.0+ - */ - -#include <config.h> - -.globl dv_board_init -dv_board_init: - - mov pc, lr diff --git a/board/davinci/schmoogie/config.mk b/board/davinci/schmoogie/config.mk deleted file mode 100644 index ed80707..0000000 --- a/board/davinci/schmoogie/config.mk +++ /dev/null @@ -1,39 +0,0 @@ -# -# (C) Copyright 2002 -# Gary Jennejohn, DENX Software Engineering, garyj@denx.de -# David Mueller, ELSOFT AG, d.mueller@elsoft.ch -# -# (C) Copyright 2003 -# Texas Instruments, <www.ti.com> -# Swaminathan swami.iyer@ti.com -# -# Davinci EVM board (ARM925EJS) cpu -# see http://www.ti.com/ for more information on Texas Instruments -# -# Davinci EVM has 1 bank of 256 MB DDR RAM -# Physical Address: -# 8000'0000 to 9000'0000 -# -# Copyright (C) 2007 Sergey Kubushyn ksi@koi8.net -# -# Visioneering Corp. Sonata board (ARM926EJS) cpu -# -# Sonata board has 1 bank of 128 MB DDR RAM -# Physical Address: -# 8000'0000 to 8800'0000 -# -# Razorstream, LLC. SCHMOOGIE board (ARM926EJS) cpu -# -# Schmoogie board has 1 bank of 128 MB DDR RAM -# Physical Address: -# 8000'0000 to 8800'0000 -# -# Linux-Kernel is expected to be at 8000'8000, entry 8000'8000 -# (mem base + reserved) -# -# we load ourself to 8108 '0000 -# -# - -#Provide at least 16MB spacing between us and the Linux Kernel image -CONFIG_SYS_TEXT_BASE = 0x81080000 diff --git a/board/davinci/schmoogie/schmoogie.c b/board/davinci/schmoogie/schmoogie.c deleted file mode 100644 index 741afc4..0000000 --- a/board/davinci/schmoogie/schmoogie.c +++ /dev/null @@ -1,119 +0,0 @@ -/* - * Copyright (C) 2007 Sergey Kubushyn ksi@koi8.net - * - * Parts are shamelessly stolen from various TI sources, original copyright - * follows: - * ----------------------------------------------------------------- - * - * Copyright (C) 2004 Texas Instruments. - * - * ---------------------------------------------------------------------------- - * SPDX-License-Identifier: GPL-2.0+ - * ---------------------------------------------------------------------------- - */ - -#include <common.h> -#include <i2c.h> -#include <asm/arch/hardware.h> -#include <asm/arch/davinci_misc.h> - -DECLARE_GLOBAL_DATA_PTR; - -int board_init(void) -{ - /* address of boot parameters */ - gd->bd->bi_boot_params = LINUX_BOOT_PARAM_ADDR; - - /* Configure AEMIF pins (although this should be configured at boot time - * with pull-up/pull-down resistors) */ - REG(PINMUX0) = 0x00000c1f; - - davinci_errata_workarounds(); - - /* Power on required peripherals */ - lpsc_on(DAVINCI_LPSC_GPIO); - -#if !defined(CONFIG_SYS_USE_DSPLINK) - /* Powerup the DSP */ - dsp_on(); -#endif /* CONFIG_SYS_USE_DSPLINK */ - - davinci_enable_uart0(); - davinci_enable_emac(); - davinci_enable_i2c(); - - lpsc_on(DAVINCI_LPSC_TIMER1); - timer_init(); - - return(0); -} - -int misc_init_r(void) -{ - u_int8_t tmp[20], buf[10]; - int i = 0; - - /* Set serial number from UID chip */ - const u_int8_t crc_tbl[256] = { - 0x00, 0x5e, 0xbc, 0xe2, 0x61, 0x3f, 0xdd, 0x83, - 0xc2, 0x9c, 0x7e, 0x20, 0xa3, 0xfd, 0x1f, 0x41, - 0x9d, 0xc3, 0x21, 0x7f, 0xfc, 0xa2, 0x40, 0x1e, - 0x5f, 0x01, 0xe3, 0xbd, 0x3e, 0x60, 0x82, 0xdc, - 0x23, 0x7d, 0x9f, 0xc1, 0x42, 0x1c, 0xfe, 0xa0, - 0xe1, 0xbf, 0x5d, 0x03, 0x80, 0xde, 0x3c, 0x62, - 0xbe, 0xe0, 0x02, 0x5c, 0xdf, 0x81, 0x63, 0x3d, - 0x7c, 0x22, 0xc0, 0x9e, 0x1d, 0x43, 0xa1, 0xff, - 0x46, 0x18, 0xfa, 0xa4, 0x27, 0x79, 0x9b, 0xc5, - 0x84, 0xda, 0x38, 0x66, 0xe5, 0xbb, 0x59, 0x07, - 0xdb, 0x85, 0x67, 0x39, 0xba, 0xe4, 0x06, 0x58, - 0x19, 0x47, 0xa5, 0xfb, 0x78, 0x26, 0xc4, 0x9a, - 0x65, 0x3b, 0xd9, 0x87, 0x04, 0x5a, 0xb8, 0xe6, - 0xa7, 0xf9, 0x1b, 0x45, 0xc6, 0x98, 0x7a, 0x24, - 0xf8, 0xa6, 0x44, 0x1a, 0x99, 0xc7, 0x25, 0x7b, - 0x3a, 0x64, 0x86, 0xd8, 0x5b, 0x05, 0xe7, 0xb9, - 0x8c, 0xd2, 0x30, 0x6e, 0xed, 0xb3, 0x51, 0x0f, - 0x4e, 0x10, 0xf2, 0xac, 0x2f, 0x71, 0x93, 0xcd, - 0x11, 0x4f, 0xad, 0xf3, 0x70, 0x2e, 0xcc, 0x92, - 0xd3, 0x8d, 0x6f, 0x31, 0xb2, 0xec, 0x0e, 0x50, - 0xaf, 0xf1, 0x13, 0x4d, 0xce, 0x90, 0x72, 0x2c, - 0x6d, 0x33, 0xd1, 0x8f, 0x0c, 0x52, 0xb0, 0xee, - 0x32, 0x6c, 0x8e, 0xd0, 0x53, 0x0d, 0xef, 0xb1, - 0xf0, 0xae, 0x4c, 0x12, 0x91, 0xcf, 0x2d, 0x73, - 0xca, 0x94, 0x76, 0x28, 0xab, 0xf5, 0x17, 0x49, - 0x08, 0x56, 0xb4, 0xea, 0x69, 0x37, 0xd5, 0x8b, - 0x57, 0x09, 0xeb, 0xb5, 0x36, 0x68, 0x8a, 0xd4, - 0x95, 0xcb, 0x29, 0x77, 0xf4, 0xaa, 0x48, 0x16, - 0xe9, 0xb7, 0x55, 0x0b, 0x88, 0xd6, 0x34, 0x6a, - 0x2b, 0x75, 0x97, 0xc9, 0x4a, 0x14, 0xf6, 0xa8, - 0x74, 0x2a, 0xc8, 0x96, 0x15, 0x4b, 0xa9, 0xf7, - 0xb6, 0xe8, 0x0a, 0x54, 0xd7, 0x89, 0x6b, 0x35 - }; - - /* Set serial number from UID chip */ - if (i2c_read(CONFIG_SYS_UID_ADDR, 0, 1, buf, 8)) { - printf("\nUID @ 0x%02x read FAILED!!!\n", CONFIG_SYS_UID_ADDR); - setenv("serial#", "FAILED"); - } else { - if (buf[0] != 0x70) { - /* Device Family Code */ - printf("\nUID @ 0x%02x read FAILED!!!\n", CONFIG_SYS_UID_ADDR); - setenv("serial#", "FAILED"); - } - } - /* Now check CRC */ - tmp[0] = 0; - for (i = 0; i < 8; i++) - tmp[0] = crc_tbl[tmp[0] ^ buf[i]]; - - if (tmp[0] != 0) { - printf("\nUID @ 0x%02x - BAD CRC!!!\n", CONFIG_SYS_UID_ADDR); - setenv("serial#", "FAILED"); - } else { - /* CRC OK, set "serial" env variable */ - sprintf((char *)&tmp[0], "%02x%02x%02x%02x%02x%02x", - buf[6], buf[5], buf[4], buf[3], buf[2], buf[1]); - setenv("serial#", (char *)&tmp[0]); - } - - return(0); -} diff --git a/board/davinci/sffsdr/Kconfig b/board/davinci/sffsdr/Kconfig deleted file mode 100644 index dc48f31..0000000 --- a/board/davinci/sffsdr/Kconfig +++ /dev/null @@ -1,12 +0,0 @@ -if TARGET_DAVINCI_SFFSDR - -config SYS_BOARD - default "sffsdr" - -config SYS_VENDOR - default "davinci" - -config SYS_CONFIG_NAME - default "davinci_sffsdr" - -endif diff --git a/board/davinci/sffsdr/MAINTAINERS b/board/davinci/sffsdr/MAINTAINERS deleted file mode 100644 index 5c7e132..0000000 --- a/board/davinci/sffsdr/MAINTAINERS +++ /dev/null @@ -1,6 +0,0 @@ -SFFSDR BOARD -#M: - -S: Maintained -F: board/davinci/sffsdr/ -F: include/configs/davinci_sffsdr.h -F: configs/davinci_sffsdr_defconfig diff --git a/board/davinci/sffsdr/Makefile b/board/davinci/sffsdr/Makefile deleted file mode 100644 index 4ab30a4..0000000 --- a/board/davinci/sffsdr/Makefile +++ /dev/null @@ -1,11 +0,0 @@ -# -# (C) Copyright 2000, 2001, 2002 -# Wolfgang Denk, DENX Software Engineering, wd@denx.de. -# -# Copyright (C) 2007 Sergey Kubushyn ksi@koi8.net -# -# SPDX-License-Identifier: GPL-2.0+ -# - -obj-y := sffsdr.o -obj-y += board_init.o diff --git a/board/davinci/sffsdr/board_init.S b/board/davinci/sffsdr/board_init.S deleted file mode 100644 index ded0590..0000000 --- a/board/davinci/sffsdr/board_init.S +++ /dev/null @@ -1,16 +0,0 @@ -/* - * Copyright (C) 2007 Sergey Kubushyn ksi@koi8.net - * - * Board-specific low level initialization code. Called at the very end - * of arch/arm/cpu/arm926ejs/davinci/lowlevel_init.S. Just returns if there is no - * initialization required. - * - * SPDX-License-Identifier: GPL-2.0+ - */ - -#include <config.h> - -.globl dv_board_init -dv_board_init: - - mov pc, lr diff --git a/board/davinci/sffsdr/config.mk b/board/davinci/sffsdr/config.mk deleted file mode 100644 index 4fe9007..0000000 --- a/board/davinci/sffsdr/config.mk +++ /dev/null @@ -1,23 +0,0 @@ -# -# (C) Copyright 2002 -# Gary Jennejohn, DENX Software Engineering, garyj@denx.de -# David Mueller, ELSOFT AG, d.mueller@elsoft.ch -# -# Copyright (C) 2008 Lyrtech <www.lyrtech.com> -# Copyright (C) 2008 Philip Balister, OpenSDR philip@opensdr.com -# -# Lyrtech SFF SDR board (ARM926EJS) cpu -# -# SFF SDR board has 1 bank of 128 MB DDR RAM -# Physical Address: -# 8000'0000 to 87FF'FFFF -# -# Linux-Kernel is expected to be at 8000'8000, entry 8000'8000 -# (mem base + reserved) -# -# Integrity kernel is expected to be at 8000'0000, entry 8000'00D0, -# up to 81FF'FFFF (uses up to 32 MB of memory for text, heap, etc). -# -# we load ourself to 8400'0000 to provide at least 32MB spacing -# between us and the Integrity kernel image -CONFIG_SYS_TEXT_BASE = 0x84000000 diff --git a/board/davinci/sffsdr/sffsdr.c b/board/davinci/sffsdr/sffsdr.c deleted file mode 100644 index f6ab91e..0000000 --- a/board/davinci/sffsdr/sffsdr.c +++ /dev/null @@ -1,132 +0,0 @@ -/* - * Copyright (C) 2007 Sergey Kubushyn ksi@koi8.net - * - * Copyright (C) 2008 Lyrtech <www.lyrtech.com> - * Copyright (C) 2008 Philip Balister, OpenSDR philip@opensdr.com - * - * Parts are shamelessly stolen from various TI sources, original copyright - * follows: - * - * Copyright (C) 2004 Texas Instruments. - * - * SPDX-License-Identifier: GPL-2.0+ - */ - -#include <common.h> -#include <i2c.h> -#include <asm/arch/hardware.h> -#include <asm/arch/davinci_misc.h> - -#define DAVINCI_A3CR (0x01E00014) /* EMIF-A CS3 config register. */ -#define DAVINCI_A3CR_VAL (0x3FFFFFFD) /* EMIF-A CS3 value for FPGA. */ - -#define INTEGRITY_SYSCFG_OFFSET 0x7E8 -#define INTEGRITY_CHECKWORD_OFFSET 0x7F8 -#define INTEGRITY_CHECKWORD_VALUE 0x10ADBEEF - -DECLARE_GLOBAL_DATA_PTR; - -int board_init(void) -{ - /* arch number of the board */ - gd->bd->bi_arch_number = MACH_TYPE_SFFSDR; - - /* address of boot parameters */ - gd->bd->bi_boot_params = LINUX_BOOT_PARAM_ADDR; - - davinci_errata_workarounds(); - - /* Power on required peripherals */ - lpsc_on(DAVINCI_LPSC_GPIO); - -#if !defined(CONFIG_SYS_USE_DSPLINK) - /* Powerup the DSP */ - dsp_on(); -#endif /* CONFIG_SYS_USE_DSPLINK */ - - davinci_enable_uart0(); - davinci_enable_emac(); - davinci_enable_i2c(); - - lpsc_on(DAVINCI_LPSC_TIMER1); - timer_init(); - - return(0); -} - -/* Read ethernet MAC address from Integrity data structure inside EEPROM. - * Returns 1 if found, 0 otherwise. - */ -static int sffsdr_read_mac_address(uint8_t *buf) -{ - u_int32_t value, mac[2], address; - - /* Read Integrity data structure checkword. */ - if (i2c_read(CONFIG_SYS_I2C_EEPROM_ADDR, INTEGRITY_CHECKWORD_OFFSET, - CONFIG_SYS_I2C_EEPROM_ADDR_LEN, (uint8_t *) &value, 4)) - goto err; - if (value != INTEGRITY_CHECKWORD_VALUE) - return 0; - - /* Read SYSCFG structure offset. */ - if (i2c_read(CONFIG_SYS_I2C_EEPROM_ADDR, INTEGRITY_SYSCFG_OFFSET, - CONFIG_SYS_I2C_EEPROM_ADDR_LEN, (uint8_t *) &value, 4)) - goto err; - address = 0x800 + (int) value; /* Address of SYSCFG structure. */ - - /* Read NET CONFIG structure offset. */ - if (i2c_read(CONFIG_SYS_I2C_EEPROM_ADDR, address, - CONFIG_SYS_I2C_EEPROM_ADDR_LEN, (uint8_t *) &value, 4)) - goto err; - address = 0x800 + (int) value; /* Address of NET CONFIG structure. */ - address += 12; /* Address of NET INTERFACE CONFIG structure. */ - - /* Read NET INTERFACE CONFIG 2 structure offset. */ - if (i2c_read(CONFIG_SYS_I2C_EEPROM_ADDR, address, - CONFIG_SYS_I2C_EEPROM_ADDR_LEN, (uint8_t *) &value, 4)) - goto err; - address = 0x800 + 16 + (int) value; /* Address of NET INTERFACE - * CONFIG 2 structure. */ - - /* Read MAC address. */ - if (i2c_read(CONFIG_SYS_I2C_EEPROM_ADDR, address, - CONFIG_SYS_I2C_EEPROM_ADDR_LEN, (uint8_t *) &mac[0], 8)) - goto err; - - buf[0] = mac[0] >> 24; - buf[1] = mac[0] >> 16; - buf[2] = mac[0] >> 8; - buf[3] = mac[0]; - buf[4] = mac[1] >> 24; - buf[5] = mac[1] >> 16; - - return 1; /* Found */ - -err: - printf("Read from EEPROM @ 0x%02x failed\n", CONFIG_SYS_I2C_EEPROM_ADDR); - return 0; -} - -/* Platform dependent initialisation. */ -int misc_init_r(void) -{ - uint8_t i2cbuf; - uint8_t eeprom_enetaddr[6]; - - /* EMIF-A CS3 configuration for FPGA. */ - REG(DAVINCI_A3CR) = DAVINCI_A3CR_VAL; - - /* Configure I2C switch (PCA9543) to enable channel 0. */ - i2cbuf = CONFIG_SYS_I2C_PCA9543_ENABLE_CH0; - if (i2c_write(CONFIG_SYS_I2C_PCA9543_ADDR, 0, - CONFIG_SYS_I2C_PCA9543_ADDR_LEN, &i2cbuf, 1)) { - printf("Write to MUX @ 0x%02x failed\n", CONFIG_SYS_I2C_PCA9543_ADDR); - return 1; - } - - /* Read Ethernet MAC address from EEPROM if available. */ - if (sffsdr_read_mac_address(eeprom_enetaddr)) - davinci_sync_env_enetaddr(eeprom_enetaddr); - - return(0); -} diff --git a/board/davinci/sonata/Kconfig b/board/davinci/sonata/Kconfig deleted file mode 100644 index 4440d95..0000000 --- a/board/davinci/sonata/Kconfig +++ /dev/null @@ -1,12 +0,0 @@ -if TARGET_DAVINCI_SONATA - -config SYS_BOARD - default "sonata" - -config SYS_VENDOR - default "davinci" - -config SYS_CONFIG_NAME - default "davinci_sonata" - -endif diff --git a/board/davinci/sonata/MAINTAINERS b/board/davinci/sonata/MAINTAINERS deleted file mode 100644 index 40659e5..0000000 --- a/board/davinci/sonata/MAINTAINERS +++ /dev/null @@ -1,6 +0,0 @@ -SONATA BOARD -#M: - -S: Maintained -F: board/davinci/sonata/ -F: include/configs/davinci_sonata.h -F: configs/davinci_sonata_defconfig diff --git a/board/davinci/sonata/Makefile b/board/davinci/sonata/Makefile deleted file mode 100644 index 92e1a18..0000000 --- a/board/davinci/sonata/Makefile +++ /dev/null @@ -1,11 +0,0 @@ -# -# (C) Copyright 2000, 2001, 2002 -# Wolfgang Denk, DENX Software Engineering, wd@denx.de. -# -# Copyright (C) 2007 Sergey Kubushyn ksi@koi8.net -# -# SPDX-License-Identifier: GPL-2.0+ -# - -obj-y := sonata.o -obj-y += board_init.o diff --git a/board/davinci/sonata/board_init.S b/board/davinci/sonata/board_init.S deleted file mode 100644 index 0a47ad5..0000000 --- a/board/davinci/sonata/board_init.S +++ /dev/null @@ -1,87 +0,0 @@ -/* - * Copyright (C) 2007 Sergey Kubushyn ksi@koi8.net - * - * Board-specific low level initialization code. Called at the very end - * of arch/arm/cpu/arm926ejs/davinci/lowlevel_init.S. Just returns if there is no - * initialization required. - * - * For _OLDER_ Sonata boards sets up GPIO4 to control NAND WP line. Newer - * Sonata boards, AFAIK, don't use this so it's just return by default. Ask - * Visioneering if they reinvented the wheel once again to make sure :) - * - * SPDX-License-Identifier: GPL-2.0+ - */ - -#include <config.h> - -.globl dv_board_init -dv_board_init: -#ifdef SONATA_BOARD_GPIOWP - /* Set PINMUX0 to enable GPIO4 */ - ldr r0, _PINMUX0 - ldr r1, GPIO4_EN_MASK - ldr r2, [r0] - and r2, r2, r1 - str r2, [r0] - - /* Enable GPIO LPSC module */ - ldr r0, PTSTAT - -gpio_ptstat_loop1: - ldr r2, [r0] - tst r2, $0x00000001 - bne gpio_ptstat_loop1 - - ldr r1, MDCTL_GPIO - ldr r2, [r1] - and r2, r2, $0xfffffff8 - orr r2, r2, $0x00000003 - str r2, [r1] - - orr r2, r2, $0x00000200 - str r2, [r1] - - ldr r1, PTCMD - mov r2, $0x00000001 - str r2, [r1] - -gpio_ptstat_loop2: - ldr r2, [r0] - tst r2, $0x00000001 - bne gpio_ptstat_loop2 - - ldr r0, MDSTAT_GPIO -gpio_mdstat_loop: - ldr r2, [r0] - and r2, r2, $0x0000001f - teq r2, $0x00000003 - bne gpio_mdstat_loop - - /* GPIO4 -> output */ - ldr r0, GPIO_DIR01 - mov r1, $0x10 - ldr r2, [r0] - bic r2, r2, r0 - str r2, [r0] - - /* Set it to 0 (Write Protect) */ - ldr r0, GPIO_CLR_DATA01 - str r1, [r0] -#endif - - mov pc, lr - -#ifdef SONATA_BOARD_GPIOWP -.ltorg - -GPIO4_EN_MASK: - .word 0xf77fffff -MDCTL_GPIO: - .word 0x01c41a68 -MDSTAT_GPIO: - .word 0x01c41868 -GPIO_DIR01: - .word 0x01c67010 -GPIO_CLR_DATA01: - .word 0x01c6701c -#endif diff --git a/board/davinci/sonata/config.mk b/board/davinci/sonata/config.mk deleted file mode 100644 index ed80707..0000000 --- a/board/davinci/sonata/config.mk +++ /dev/null @@ -1,39 +0,0 @@ -# -# (C) Copyright 2002 -# Gary Jennejohn, DENX Software Engineering, garyj@denx.de -# David Mueller, ELSOFT AG, d.mueller@elsoft.ch -# -# (C) Copyright 2003 -# Texas Instruments, <www.ti.com> -# Swaminathan swami.iyer@ti.com -# -# Davinci EVM board (ARM925EJS) cpu -# see http://www.ti.com/ for more information on Texas Instruments -# -# Davinci EVM has 1 bank of 256 MB DDR RAM -# Physical Address: -# 8000'0000 to 9000'0000 -# -# Copyright (C) 2007 Sergey Kubushyn ksi@koi8.net -# -# Visioneering Corp. Sonata board (ARM926EJS) cpu -# -# Sonata board has 1 bank of 128 MB DDR RAM -# Physical Address: -# 8000'0000 to 8800'0000 -# -# Razorstream, LLC. SCHMOOGIE board (ARM926EJS) cpu -# -# Schmoogie board has 1 bank of 128 MB DDR RAM -# Physical Address: -# 8000'0000 to 8800'0000 -# -# Linux-Kernel is expected to be at 8000'8000, entry 8000'8000 -# (mem base + reserved) -# -# we load ourself to 8108 '0000 -# -# - -#Provide at least 16MB spacing between us and the Linux Kernel image -CONFIG_SYS_TEXT_BASE = 0x81080000 diff --git a/board/davinci/sonata/sonata.c b/board/davinci/sonata/sonata.c deleted file mode 100644 index f5c3258..0000000 --- a/board/davinci/sonata/sonata.c +++ /dev/null @@ -1,87 +0,0 @@ -/* - * Copyright (C) 2007 Sergey Kubushyn ksi@koi8.net - * - * Parts are shamelessly stolen from various TI sources, original copyright - * follows: - * ----------------------------------------------------------------- - * - * Copyright (C) 2004 Texas Instruments. - * - * ---------------------------------------------------------------------------- - * SPDX-License-Identifier: GPL-2.0+ - * ---------------------------------------------------------------------------- - */ - -#include <common.h> -#include <nand.h> -#include <asm/ti-common/davinci_nand.h> -#include <asm/arch/hardware.h> -#include <asm/arch/davinci_misc.h> - -DECLARE_GLOBAL_DATA_PTR; - -int board_init(void) -{ - /* address of boot parameters */ - gd->bd->bi_boot_params = LINUX_BOOT_PARAM_ADDR; - - /* Configure AEMIF pins (although this should be configured at boot time - * with pull-up/pull-down resistors) */ - REG(PINMUX0) = 0x00000c1f; - - davinci_errata_workarounds(); - - /* Power on required peripherals */ - lpsc_on(DAVINCI_LPSC_GPIO); - -#if !defined(CONFIG_SYS_USE_DSPLINK) - /* Powerup the DSP */ - dsp_on(); -#endif /* CONFIG_SYS_USE_DSPLINK */ - - davinci_enable_uart0(); - davinci_enable_emac(); - davinci_enable_i2c(); - - lpsc_on(DAVINCI_LPSC_TIMER1); - timer_init(); - - return(0); -} - -int misc_init_r(void) -{ - uint8_t eeprom_enetaddr[6]; - - /* Read Ethernet MAC address from EEPROM if available. */ - if (dvevm_read_mac_address(eeprom_enetaddr)) - davinci_sync_env_enetaddr(eeprom_enetaddr); - - return(0); -} - -#ifdef CONFIG_NAND_DAVINCI - -/* Set WP on deselect, write enable on select */ -static void nand_sonata_select_chip(struct mtd_info *mtd, int chip) -{ -#define GPIO_SET_DATA01 0x01c67018 -#define GPIO_CLR_DATA01 0x01c6701c -#define GPIO_NAND_WP (1 << 4) -#ifdef SONATA_BOARD_GPIOWP - if (chip < 0) { - REG(GPIO_CLR_DATA01) |= GPIO_NAND_WP; - } else { - REG(GPIO_SET_DATA01) |= GPIO_NAND_WP; - } -#endif -} - -int board_nand_init(struct nand_chip *nand) -{ - davinci_nand_init(nand); - nand->select_chip = nand_sonata_select_chip; - return 0; -} - -#endif /* CONFIG_NAND_DAVINCI */ diff --git a/configs/davinci_dm355evm_defconfig b/configs/davinci_dm355evm_defconfig deleted file mode 100644 index 4513ce4..0000000 --- a/configs/davinci_dm355evm_defconfig +++ /dev/null @@ -1,9 +0,0 @@ -CONFIG_ARM=y -CONFIG_ARCH_DAVINCI=y -CONFIG_TARGET_DAVINCI_DM355EVM=y -# CONFIG_CMD_BDI is not set -# CONFIG_CMD_IMLS is not set -# CONFIG_CMD_FLASH is not set -# CONFIG_CMD_FPGA is not set -# CONFIG_CMD_SETEXPR is not set -CONFIG_SYS_PROMPT="DM355 EVM # " diff --git a/configs/davinci_dm355leopard_defconfig b/configs/davinci_dm355leopard_defconfig deleted file mode 100644 index 7945605..0000000 --- a/configs/davinci_dm355leopard_defconfig +++ /dev/null @@ -1,9 +0,0 @@ -CONFIG_ARM=y -CONFIG_ARCH_DAVINCI=y -CONFIG_TARGET_DAVINCI_DM355LEOPARD=y -# CONFIG_CMD_BDI is not set -# CONFIG_CMD_IMLS is not set -# CONFIG_CMD_FLASH is not set -# CONFIG_CMD_FPGA is not set -# CONFIG_CMD_SETEXPR is not set -CONFIG_SYS_PROMPT="DM355 LEOPARD # " diff --git a/configs/davinci_dm365evm_defconfig b/configs/davinci_dm365evm_defconfig deleted file mode 100644 index 3550e75..0000000 --- a/configs/davinci_dm365evm_defconfig +++ /dev/null @@ -1,9 +0,0 @@ -CONFIG_ARM=y -CONFIG_ARCH_DAVINCI=y -CONFIG_TARGET_DAVINCI_DM365EVM=y -# CONFIG_CMD_BDI is not set -# CONFIG_CMD_IMLS is not set -# CONFIG_CMD_FLASH is not set -# CONFIG_CMD_FPGA is not set -# CONFIG_CMD_SETEXPR is not set -CONFIG_SYS_PROMPT="DM36x EVM # " diff --git a/configs/davinci_dm6467Tevm_defconfig b/configs/davinci_dm6467Tevm_defconfig deleted file mode 100644 index 3749b81..0000000 --- a/configs/davinci_dm6467Tevm_defconfig +++ /dev/null @@ -1,9 +0,0 @@ -CONFIG_ARM=y -CONFIG_ARCH_DAVINCI=y -CONFIG_TARGET_DAVINCI_DM6467EVM=y -CONFIG_SYS_EXTRA_OPTIONS="DAVINCI_DM6467TEVM,REFCLK_FREQ=33000000" -# CONFIG_CMD_BDI is not set -# CONFIG_CMD_IMLS is not set -# CONFIG_CMD_FLASH is not set -# CONFIG_CMD_FPGA is not set -# CONFIG_CMD_SETEXPR is not set diff --git a/configs/davinci_dm6467evm_defconfig b/configs/davinci_dm6467evm_defconfig deleted file mode 100644 index b2021af..0000000 --- a/configs/davinci_dm6467evm_defconfig +++ /dev/null @@ -1,10 +0,0 @@ -CONFIG_ARM=y -CONFIG_ARCH_DAVINCI=y -CONFIG_TARGET_DAVINCI_DM6467EVM=y -CONFIG_SYS_EXTRA_OPTIONS="REFCLK_FREQ=27000000" -# CONFIG_CMD_BDI is not set -# CONFIG_CMD_IMLS is not set -# CONFIG_CMD_FLASH is not set -# CONFIG_CMD_FPGA is not set -# CONFIG_CMD_SETEXPR is not set -CONFIG_SYS_PROMPT="DM6467 EVM > " diff --git a/configs/davinci_dvevm_defconfig b/configs/davinci_dvevm_defconfig deleted file mode 100644 index 7c6f03e..0000000 --- a/configs/davinci_dvevm_defconfig +++ /dev/null @@ -1,9 +0,0 @@ -CONFIG_ARM=y -CONFIG_ARCH_DAVINCI=y -CONFIG_TARGET_DAVINCI_DVEVM=y -# CONFIG_CMD_BDI is not set -# CONFIG_CMD_IMLS is not set -# CONFIG_CMD_FLASH is not set -# CONFIG_CMD_FPGA is not set -# CONFIG_CMD_SETEXPR is not set -CONFIG_SYS_PROMPT="U-Boot > " diff --git a/configs/davinci_schmoogie_defconfig b/configs/davinci_schmoogie_defconfig deleted file mode 100644 index 2fb4d9f..0000000 --- a/configs/davinci_schmoogie_defconfig +++ /dev/null @@ -1,9 +0,0 @@ -CONFIG_ARM=y -CONFIG_ARCH_DAVINCI=y -CONFIG_TARGET_DAVINCI_SCHMOOGIE=y -# CONFIG_CMD_BDI is not set -# CONFIG_CMD_IMLS is not set -# CONFIG_CMD_FLASH is not set -# CONFIG_CMD_FPGA is not set -# CONFIG_CMD_SETEXPR is not set -CONFIG_SYS_PROMPT="U-Boot > " diff --git a/configs/davinci_sffsdr_defconfig b/configs/davinci_sffsdr_defconfig deleted file mode 100644 index 633b4a8..0000000 --- a/configs/davinci_sffsdr_defconfig +++ /dev/null @@ -1,9 +0,0 @@ -CONFIG_ARM=y -CONFIG_ARCH_DAVINCI=y -CONFIG_TARGET_DAVINCI_SFFSDR=y -# CONFIG_CMD_BDI is not set -# CONFIG_CMD_IMLS is not set -# CONFIG_CMD_FLASH is not set -# CONFIG_CMD_FPGA is not set -# CONFIG_CMD_SETEXPR is not set -CONFIG_SYS_PROMPT="U-Boot > " diff --git a/configs/davinci_sonata_defconfig b/configs/davinci_sonata_defconfig deleted file mode 100644 index 697ce06..0000000 --- a/configs/davinci_sonata_defconfig +++ /dev/null @@ -1,7 +0,0 @@ -CONFIG_ARM=y -CONFIG_ARCH_DAVINCI=y -CONFIG_TARGET_DAVINCI_SONATA=y -# CONFIG_CMD_BDI is not set -# CONFIG_CMD_FPGA is not set -# CONFIG_CMD_SETEXPR is not set -CONFIG_SYS_PROMPT="U-Boot > " diff --git a/configs/ea20_defconfig b/configs/ea20_defconfig deleted file mode 100644 index 1d7494f..0000000 --- a/configs/ea20_defconfig +++ /dev/null @@ -1,8 +0,0 @@ -CONFIG_ARM=y -CONFIG_ARCH_DAVINCI=y -CONFIG_TARGET_EA20=y -# CONFIG_CMD_IMLS is not set -# CONFIG_CMD_FLASH is not set -# CONFIG_CMD_SETEXPR is not set -CONFIG_SPI_FLASH=y -CONFIG_SYS_PROMPT="ea20 > " diff --git a/include/configs/davinci_dm355evm.h b/include/configs/davinci_dm355evm.h deleted file mode 100644 index 72296a0..0000000 --- a/include/configs/davinci_dm355evm.h +++ /dev/null @@ -1,195 +0,0 @@ -/* - * Copyright (C) 2009 David Brownell - * - * SPDX-License-Identifier: GPL-2.0+ - */ - -#ifndef __CONFIG_H -#define __CONFIG_H - -/* Spectrum Digital TMS320DM355 EVM board */ -#define DAVINCI_DM355EVM - -#define CONFIG_SKIP_LOWLEVEL_INIT /* U-Boot is a 3rd stage loader */ -#define CONFIG_SYS_NO_FLASH /* that is, no *NOR* flash */ -#define CONFIG_SYS_CONSOLE_INFO_QUIET - -/* SoC Configuration */ -#define CONFIG_SYS_TIMERBASE 0x01c21400 /* use timer 0 */ -#define CONFIG_SYS_HZ_CLOCK 24000000 /* timer0 freq */ -#define CONFIG_SOC_DM355 - -/* Memory Info */ -#define CONFIG_NR_DRAM_BANKS 1 -#define PHYS_SDRAM_1 0x80000000 -#define PHYS_SDRAM_1_SIZE (128 << 20) /* 128 MiB */ - -/* Serial Driver info: UART0 for console */ -#define CONFIG_SYS_NS16550 -#define CONFIG_SYS_NS16550_SERIAL -#define CONFIG_SYS_NS16550_REG_SIZE -4 -#define CONFIG_SYS_NS16550_COM1 0x01c20000 -#define CONFIG_SYS_NS16550_CLK CONFIG_SYS_HZ_CLOCK -#define CONFIG_CONS_INDEX 1 -#define CONFIG_BAUDRATE 115200 - -/* Ethernet: external DM9000 */ -#define CONFIG_DRIVER_DM9000 1 -#define CONFIG_DM9000_BASE 0x04014000 -#define DM9000_IO CONFIG_DM9000_BASE -#define DM9000_DATA (CONFIG_DM9000_BASE + 2) - -/* I2C */ -#define CONFIG_SYS_I2C -#define CONFIG_SYS_I2C_DAVINCI -#define CONFIG_SYS_DAVINCI_I2C_SPEED 400000 -#define CONFIG_SYS_DAVINCI_I2C_SLAVE 0x10 /* SMBus host address */ - -/* NAND: socketed, two chipselects, normally 2 GBytes */ -#define CONFIG_NAND_DAVINCI -#define CONFIG_SYS_NAND_CS 2 -#define CONFIG_SYS_NAND_USE_FLASH_BBT -#define CONFIG_SYS_NAND_4BIT_HW_ECC_OOBFIRST -#define CONFIG_SYS_NAND_PAGE_2K - -#define CONFIG_SYS_NAND_LARGEPAGE -#define CONFIG_SYS_NAND_BASE_LIST { 0x02000000, } -/* socket has two chipselects, nCE0 gated by address BIT(14) */ -#define CONFIG_SYS_MAX_NAND_DEVICE 1 -#define CONFIG_SYS_NAND_MAX_CHIPS 2 - -/* SD/MMC */ -#define CONFIG_MMC -#define CONFIG_GENERIC_MMC -#define CONFIG_DAVINCI_MMC -#define CONFIG_DAVINCI_MMC_SD1 -#define CONFIG_MMC_MBLOCK - -/* USB: OTG connector */ -/* NYET -- #define CONFIG_USB_DAVINCI */ - -/* U-Boot command configuration */ -#define CONFIG_CMD_ASKENV -#define CONFIG_CMD_DHCP -#define CONFIG_CMD_I2C -#define CONFIG_CMD_PING -#define CONFIG_CMD_SAVES - -#ifdef CONFIG_CMD_BDI -#define CONFIG_CLOCKS -#endif - -#ifdef CONFIG_MMC -#define CONFIG_DOS_PARTITION -#define CONFIG_CMD_EXT2 -#define CONFIG_CMD_FAT -#define CONFIG_CMD_MMC -#endif - -#ifdef CONFIG_NAND_DAVINCI -#define CONFIG_CMD_MTDPARTS -#define CONFIG_MTD_PARTITIONS -#define CONFIG_MTD_DEVICE -#define CONFIG_CMD_NAND -#define CONFIG_CMD_UBI -#define CONFIG_RBTREE -#endif - -#ifdef CONFIG_USB_DAVINCI -#define CONFIG_USB_MUSB_HCD -#define CONFIG_CMD_USB -#define CONFIG_USB_STORAGE -#else -#undef CONFIG_USB_MUSB_HCD -#undef CONFIG_CMD_USB -#undef CONFIG_USB_STORAGE -#endif - -#define CONFIG_CRC32_VERIFY -#define CONFIG_MX_CYCLIC - -/* U-Boot general configuration */ -#define CONFIG_BOOTFILE "uImage" /* Boot file name */ -#define CONFIG_SYS_CBSIZE 1024 /* Console I/O Buffer Size */ -#define CONFIG_SYS_PBSIZE /* Print buffer size */ \ - (CONFIG_SYS_CBSIZE + sizeof(CONFIG_SYS_PROMPT) + 16) -#define CONFIG_SYS_MAXARGS 16 /* max number of command args */ -#define CONFIG_SYS_HUSH_PARSER -#define CONFIG_SYS_LONGHELP - -#ifdef CONFIG_NAND_DAVINCI -#define CONFIG_ENV_SIZE (256 << 10) /* 256 KiB */ -#define CONFIG_ENV_IS_IN_NAND -#define CONFIG_ENV_OFFSET 0x3C0000 -#undef CONFIG_ENV_IS_IN_FLASH -#endif - -#if defined(CONFIG_MMC) && !defined(CONFIG_ENV_IS_IN_NAND) -#define CONFIG_CMD_ENV -#define CONFIG_ENV_SIZE (16 << 10) /* 16 KiB */ -#define CONFIG_ENV_OFFSET (51 << 9) /* Sector 51 */ -#define CONFIG_ENV_IS_IN_MMC -#undef CONFIG_ENV_IS_IN_FLASH -#endif - -#define CONFIG_BOOTDELAY 5 -#define CONFIG_BOOTCOMMAND \ - "dhcp;bootm" -#define CONFIG_BOOTARGS \ - "console=ttyS0,115200n8 " \ - "root=/dev/mmcblk0p1 rootwait rootfstype=ext3 ro" - -#define CONFIG_CMDLINE_EDITING -#define CONFIG_VERSION_VARIABLE -#define CONFIG_TIMESTAMP - -#define CONFIG_NET_RETRY_COUNT 10 - -/* U-Boot memory configuration */ -#define CONFIG_SYS_MALLOC_LEN (1 << 20) /* 1 MiB */ -#define CONFIG_SYS_MEMTEST_START 0x87000000 /* physical address */ -#define CONFIG_SYS_MEMTEST_END 0x88000000 /* test 16MB RAM */ - -/* Linux interfacing */ -#define CONFIG_CMDLINE_TAG -#define CONFIG_SETUP_MEMORY_TAGS -#define CONFIG_SYS_BARGSIZE 1024 /* bootarg Size */ -#define CONFIG_SYS_LOAD_ADDR 0x80700000 /* kernel address */ - - -/* NAND configuration ... socketed with two chipselects. It normally comes - * with a 2GByte SLC part with 2KB pages (and 128KB erase blocks); other - * 2GByte parts may have 4KB pages, 256KB erase blocks, and use MLC. (MLC - * pretty much demands the 4-bit ECC support.) You can of course swap in - * other parts, including small page ones. - * - * This presents a single read-only partition for all bootloader stuff. - * UBL (1+ block), U-Boot (256KB+), U-Boot environment (one block), and - * some extra space to help cope with bad blocks in that data. Linux - * shouldn't care about its detailed layout, and will probably want to use - * UBI/UBFS for the rest (except maybe on smallpage chips). It's easy to - * override this default partitioning using MTDPARTS and cmdlinepart. - */ -#define MTDIDS_DEFAULT "nand0=davinci_nand.0" - -#ifdef CONFIG_SYS_NAND_LARGEPAGE -/* Use same layout for 128K/256K blocks; allow some bad blocks */ -#define PART_BOOT "2m(bootloader)ro," -#else -/* Assume 16K erase blocks; allow a few bad ones. */ -#define PART_BOOT "512k(bootloader)ro," -#endif - -#define PART_KERNEL "4m(kernel)," /* kernel + initramfs */ -#define PART_REST "-(filesystem)" - -#define MTDPARTS_DEFAULT \ - "mtdparts=davinci_nand.0:" PART_BOOT PART_KERNEL PART_REST - -#define CONFIG_MAX_RAM_BANK_SIZE (256 << 20) /* 256 MB */ - -#define CONFIG_SYS_SDRAM_BASE PHYS_SDRAM_1 -#define CONFIG_SYS_INIT_SP_ADDR \ - (CONFIG_SYS_SDRAM_BASE + 0x1000 - GENERATED_GBL_DATA_SIZE) - -#endif /* __CONFIG_H */ diff --git a/include/configs/davinci_dm355leopard.h b/include/configs/davinci_dm355leopard.h deleted file mode 100644 index e3ff943..0000000 --- a/include/configs/davinci_dm355leopard.h +++ /dev/null @@ -1,140 +0,0 @@ -/* - * Copyright (C) 2009 Texas Instruments Incorporated - * - * SPDX-License-Identifier: GPL-2.0+ - */ - -#ifndef __CONFIG_H -#define __CONFIG_H - -#define DAVINCI_DM355LEOPARD - -#define CONFIG_SKIP_LOWLEVEL_INIT /* U-Boot is a 3rd stage loader */ -#define CONFIG_SYS_NO_FLASH /* that is, no *NOR* flash */ -#define CONFIG_SYS_CONSOLE_INFO_QUIET - -/* SoC Configuration */ -#define CONFIG_SYS_TIMERBASE 0x01c21400 /* use timer 0 */ -#define CONFIG_SYS_HZ_CLOCK 24000000 /* timer0 freq */ -#define CONFIG_SOC_DM355 /* DM355 based board */ - -/* Memory Info */ -#define CONFIG_NR_DRAM_BANKS 1 -#define PHYS_SDRAM_1 0x80000000 -#define PHYS_SDRAM_1_SIZE (128 << 20) /* 128 MiB */ - -/* Serial Driver info: UART0 for console */ -#define CONFIG_SYS_NS16550 -#define CONFIG_SYS_NS16550_SERIAL -#define CONFIG_SYS_NS16550_REG_SIZE -4 -#define CONFIG_SYS_NS16550_COM1 0x01c20000 -#define CONFIG_SYS_NS16550_CLK CONFIG_SYS_HZ_CLOCK -#define CONFIG_CONS_INDEX 1 -#define CONFIG_BAUDRATE 115200 - -/* Ethernet: external DM9000 */ -#define CONFIG_DRIVER_DM9000 1 -#define CONFIG_DM9000_BASE 0x04000000 -#define DM9000_IO CONFIG_DM9000_BASE -#define DM9000_DATA (CONFIG_DM9000_BASE + 16) - -/* I2C */ -#define CONFIG_SYS_I2C -#define CONFIG_SYS_I2C_DAVINCI -#define CONFIG_SYS_DAVINCI_I2C_SPEED 400000 -#define CONFIG_SYS_DAVINCI_I2C_SLAVE 0x10 - -/* NAND */ -#define CONFIG_NAND_DAVINCI -#define CONFIG_SYS_NAND_CS 2 -#define CONFIG_SYS_NAND_USE_FLASH_BBT -#define CONFIG_SYS_NAND_HW_ECC - -#define CONFIG_SYS_NAND_BASE_LIST { 0x02000000, } -#define CONFIG_SYS_MAX_NAND_DEVICE 1 - -/* U-Boot command configuration */ -#define CONFIG_CMD_ASKENV -#define CONFIG_CMD_DHCP -#define CONFIG_CMD_I2C -#define CONFIG_CMD_PING -#define CONFIG_CMD_SAVES - -#ifdef CONFIG_CMD_BDI -#define CONFIG_CLOCKS -#endif - -#ifdef CONFIG_NAND_DAVINCI -#define CONFIG_CMD_MTDPARTS -#define CONFIG_MTD_PARTITIONS -#define CONFIG_MTD_DEVICE -#define CONFIG_CMD_NAND -#define CONFIG_CMD_UBI -#define CONFIG_RBTREE -#endif - -#define CONFIG_CRC32_VERIFY -#define CONFIG_MX_CYCLIC - -/* U-Boot general configuration */ -#define CONFIG_BOOTFILE "uImage" /* Boot file name */ -#define CONFIG_SYS_CBSIZE 1024 /* Console I/O Buffer Size */ -#define CONFIG_SYS_PBSIZE /* Print buffer size */ \ - (CONFIG_SYS_CBSIZE + sizeof(CONFIG_SYS_PROMPT) + 16) -#define CONFIG_SYS_MAXARGS 16 /* max number of command args */ -#define CONFIG_SYS_HUSH_PARSER -#define CONFIG_SYS_LONGHELP - -#ifdef CONFIG_NAND_DAVINCI -#define CONFIG_ENV_SIZE (256 << 10) /* 256 KiB */ -#define CONFIG_ENV_IS_IN_NAND -#define CONFIG_ENV_OFFSET 0x3C0000 -#undef CONFIG_ENV_IS_IN_FLASH -#define CONFIG_ENV_OVERWRITE -#endif - -#define CONFIG_BOOTDELAY 3 -#define CONFIG_BOOTCOMMAND "dhcp;bootm" -#define CONFIG_BOOTARGS \ - "console=ttyS0,115200n8 " \ - "root=/dev/mmcblk0p1 rootwait rootfstype=ext3 ro" - -#define CONFIG_CMDLINE_EDITING -#define CONFIG_VERSION_VARIABLE -#define CONFIG_TIMESTAMP - -#define CONFIG_NET_RETRY_COUNT 10 - -/* U-Boot memory configuration */ -#define CONFIG_SYS_MALLOC_LEN (1 << 20) /* 1 MiB */ -#define CONFIG_SYS_MEMTEST_START 0x87000000 /* physical address */ -#define CONFIG_SYS_MEMTEST_END 0x88000000 /* test 16MB RAM */ - -/* Linux interfacing */ -#define CONFIG_CMDLINE_TAG -#define CONFIG_SETUP_MEMORY_TAGS -#define CONFIG_SYS_BARGSIZE 1024 /* bootarg Size */ -#define CONFIG_SYS_LOAD_ADDR 0x80700000 /* kernel address */ - -#define MTDIDS_DEFAULT "nand0=davinci_nand.0" - -#ifdef CONFIG_SYS_NAND_LARGEPAGE -#define PART_BOOT "2m(bootloader)ro," -#else -/* Assume 16K erase blocks; allow a few bad ones. */ -#define PART_BOOT "512k(bootloader)ro," -#endif - -#define PART_KERNEL "4m(kernel)," /* kernel + initramfs */ -#define PART_REST "-(filesystem)" - -#define MTDPARTS_DEFAULT \ - "mtdparts=davinci_nand.0:" PART_BOOT PART_KERNEL PART_REST - -#define CONFIG_MAX_RAM_BANK_SIZE (256 << 20) /* 256 MB */ - -#define CONFIG_SYS_SDRAM_BASE PHYS_SDRAM_1 -#define CONFIG_SYS_INIT_SP_ADDR \ - (CONFIG_SYS_SDRAM_BASE + 0x1000 - GENERATED_GBL_DATA_SIZE) - -#endif /* __CONFIG_H */ diff --git a/include/configs/davinci_dm365evm.h b/include/configs/davinci_dm365evm.h deleted file mode 100644 index bbc801b..0000000 --- a/include/configs/davinci_dm365evm.h +++ /dev/null @@ -1,220 +0,0 @@ -/* - * Copyright (C) 2009 Texas Instruments Incorporated - * - * SPDX-License-Identifier: GPL-2.0+ - */ - -#ifndef __CONFIG_H -#define __CONFIG_H - -/* Spectrum Digital TMS320DM365 EVM board */ -#define DAVINCI_DM365EVM - -#define CONFIG_SKIP_LOWLEVEL_INIT /* U-Boot is a 3rd stage loader */ -#define CONFIG_SYS_NO_FLASH /* that is, no *NOR* flash */ -#define CONFIG_SYS_CONSOLE_INFO_QUIET - -/* SoC Configuration */ -#define CONFIG_SYS_TIMERBASE 0x01c21400 /* use timer 0 */ -#define CONFIG_SYS_HZ_CLOCK 24000000 /* timer0 freq */ -#define CONFIG_SOC_DM365 - -/* Memory Info */ -#define CONFIG_NR_DRAM_BANKS 1 -#define PHYS_SDRAM_1 0x80000000 -#define PHYS_SDRAM_1_SIZE (128 << 20) /* 128 MiB */ - -/* Serial Driver info: UART0 for console */ -#define CONFIG_SYS_NS16550 -#define CONFIG_SYS_NS16550_SERIAL -#define CONFIG_SYS_NS16550_REG_SIZE -4 -#define CONFIG_SYS_NS16550_COM1 0x01c20000 -#define CONFIG_SYS_NS16550_CLK CONFIG_SYS_HZ_CLOCK -#define CONFIG_CONS_INDEX 1 -#define CONFIG_BAUDRATE 115200 - -/* EEPROM definitions for EEPROM on DM365 EVM */ -#define CONFIG_SYS_I2C_EEPROM_ADDR_LEN 2 -#define CONFIG_SYS_I2C_EEPROM_ADDR 0x50 -#define CONFIG_SYS_EEPROM_PAGE_WRITE_BITS 6 -#define CONFIG_SYS_EEPROM_PAGE_WRITE_DELAY_MS 20 - -/* Network Configuration */ -#define CONFIG_DRIVER_TI_EMAC -#define CONFIG_MII -#define CONFIG_BOOTP_DNS -#define CONFIG_BOOTP_DNS2 -#define CONFIG_BOOTP_SEND_HOSTNAME -#define CONFIG_NET_RETRY_COUNT 10 - -/* I2C */ -#define CONFIG_SYS_I2C -#define CONFIG_SYS_I2C_DAVINCI -#define CONFIG_SYS_DAVINCI_I2C_SPEED 400000 -#define CONFIG_SYS_DAVINCI_I2C_SLAVE 0x10 /* SMBus host address */ - -/* NAND: socketed, two chipselects, normally 2 GBytes */ -#define CONFIG_NAND_DAVINCI -#define CONFIG_SYS_NAND_CS 2 -#define CONFIG_SYS_NAND_USE_FLASH_BBT -#define CONFIG_SYS_NAND_4BIT_HW_ECC_OOBFIRST -#define CONFIG_SYS_NAND_PAGE_2K - -#define CONFIG_SYS_NAND_LARGEPAGE -#define CONFIG_SYS_NAND_BASE_LIST { 0x02000000, } -/* socket has two chipselects, nCE0 gated by address BIT(14) */ -#define CONFIG_SYS_MAX_NAND_DEVICE 1 -#define CONFIG_SYS_NAND_MAX_CHIPS 2 - -/* SD/MMC */ -#define CONFIG_MMC -#define CONFIG_GENERIC_MMC -#define CONFIG_DAVINCI_MMC -#define CONFIG_DAVINCI_MMC_SD1 -#define CONFIG_MMC_MBLOCK - -#define PINMUX4_USBDRVBUS_BITCLEAR 0x3000 -#define PINMUX4_USBDRVBUS_BITSET 0x2000 - -/* USB Configuration */ -#define CONFIG_USB_DAVINCI -#define CONFIG_USB_MUSB_HCD - -#ifdef CONFIG_USB_DAVINCI -#define CONFIG_CMD_USB /* include support for usb */ -#define CONFIG_CMD_STORAGE /* include support for usb */ -#define CONFIG_CMD_FAT /* include support for FAT/storage*/ -#define CONFIG_DOS_PARTITION /* include support for FAT/storage*/ -#endif - -#ifdef CONFIG_USB_MUSB_HCD /* include support for usb host */ -#define CONFIG_CMD_USB /* include support for usb cmd */ -#define CONFIG_USB_STORAGE /* MSC class support */ -#define CONFIG_CMD_STORAGE /* inclue support for usb-storage cmd */ -#define CONFIG_CMD_FAT /* inclue support for FAT/storage */ -#define CONFIG_DOS_PARTITION /* inclue support for FAT/storage */ - -#ifdef CONFIG_USB_KEYBOARD /* HID class support */ -#define CONFIG_SYS_USB_EVENT_POLL - -#define CONFIG_PREBOOT "usb start" -#endif /* CONFIG_USB_KEYBOARD */ -#endif /* CONFIG_USB_MUSB_HCD */ - -#ifdef CONFIG_USB_MUSB_UDC -#define CONFIG_USB_DEVICE 1 -#define CONFIG_USB_TTY 1 -#define CONFIG_SYS_CONSOLE_IS_IN_ENV 1 -#define CONFIG_USBD_VENDORID 0x0451 -#define CONFIG_USBD_PRODUCTID 0x5678 -#define CONFIG_USBD_MANUFACTURER "Texas Instruments" -#define CONFIG_USBD_PRODUCT_NAME "DM365VM" -#endif /* CONFIG_USB_MUSB_UDC */ - -/* U-Boot command configuration */ -#define CONFIG_CMD_ASKENV -#define CONFIG_CMD_DHCP -#define CONFIG_CMD_I2C -#define CONFIG_CMD_PING -#define CONFIG_CMD_SAVES - -#ifdef CONFIG_CMD_BDI -#define CONFIG_CLOCKS -#endif - -#ifdef CONFIG_MMC -#define CONFIG_DOS_PARTITION -#define CONFIG_CMD_EXT2 -#define CONFIG_CMD_FAT -#define CONFIG_CMD_MMC -#endif - -#ifdef CONFIG_NAND_DAVINCI -#define CONFIG_CMD_MTDPARTS -#define CONFIG_MTD_PARTITIONS -#define CONFIG_MTD_DEVICE -#define CONFIG_CMD_NAND -#define CONFIG_CMD_UBI -#define CONFIG_RBTREE -#endif - -#define CONFIG_CRC32_VERIFY -#define CONFIG_MX_CYCLIC - -/* U-Boot general configuration */ -#define CONFIG_BOOTFILE "uImage" /* Boot file name */ -#define CONFIG_SYS_CBSIZE 1024 /* Console I/O Buffer Size */ -#define CONFIG_SYS_PBSIZE /* Print buffer size */ \ - (CONFIG_SYS_CBSIZE + sizeof(CONFIG_SYS_PROMPT) + 16) -#define CONFIG_SYS_MAXARGS 16 /* max number of command args */ -#define CONFIG_SYS_HUSH_PARSER -#define CONFIG_SYS_LONGHELP - -#ifdef CONFIG_NAND_DAVINCI -#define CONFIG_ENV_SIZE (256 << 10) /* 256 KiB */ -#define CONFIG_ENV_IS_IN_NAND -#define CONFIG_ENV_OFFSET 0x3C0000 -#undef CONFIG_ENV_IS_IN_FLASH -#endif - -#if defined(CONFIG_MMC) && !defined(CONFIG_ENV_IS_IN_NAND) -#define CONFIG_CMD_ENV -#define CONFIG_ENV_SIZE (16 << 10) /* 16 KiB */ -#define CONFIG_ENV_OFFSET (51 << 9) /* Sector 51 */ -#define CONFIG_ENV_IS_IN_MMC -#undef CONFIG_ENV_IS_IN_FLASH -#endif - -#define CONFIG_BOOTDELAY 3 -#define CONFIG_BOOTCOMMAND \ - "dhcp;bootm" -#define CONFIG_BOOTARGS \ - "console=ttyS0,115200n8 " \ - "root=/dev/mmcblk0p1 rootwait rootfstype=ext3 ro" - -#define CONFIG_CMDLINE_EDITING -#define CONFIG_VERSION_VARIABLE -#define CONFIG_TIMESTAMP - -/* U-Boot memory configuration */ -#define CONFIG_SYS_MALLOC_LEN (1 << 20) /* 1 MiB */ -#define CONFIG_SYS_MEMTEST_START 0x87000000 /* physical address */ -#define CONFIG_SYS_MEMTEST_END 0x88000000 /* test 16MB RAM */ - -/* Linux interfacing */ -#define CONFIG_CMDLINE_TAG -#define CONFIG_SETUP_MEMORY_TAGS -#define CONFIG_SYS_BARGSIZE 1024 /* bootarg Size */ -#define CONFIG_SYS_LOAD_ADDR 0x80700000 /* kernel address */ - - -/* NAND configuration issocketed with two chipselects just like the DM355 EVM. - * It normally comes with a 2GByte SLC part with 2KB pages - * (and 128KB erase blocks); other - * 2GByte parts may have 4KB pages, 256KB erase blocks, and use MLC. (MLC - * pretty much demands the 4-bit ECC support.) You can of course swap in - * other parts, including small page ones. - */ -#define MTDIDS_DEFAULT "nand0=davinci_nand.0" - -#ifdef CONFIG_SYS_NAND_LARGEPAGE -/* Use same layout for 128K/256K blocks; allow some bad blocks */ -#define PART_BOOT "2m(bootloader)ro," -#else -/* Assume 16K erase blocks; allow a few bad ones. */ -#define PART_BOOT "512k(bootloader)ro," -#endif - -#define PART_KERNEL "4m(kernel)," /* kernel + initramfs */ -#define PART_REST "-(filesystem)" - -#define MTDPARTS_DEFAULT \ - "mtdparts=davinci_nand.0:" PART_BOOT PART_KERNEL PART_REST - -#define CONFIG_MAX_RAM_BANK_SIZE (256 << 20) /* 256 MB */ - -#define CONFIG_SYS_SDRAM_BASE PHYS_SDRAM_1 -#define CONFIG_SYS_INIT_SP_ADDR \ - (CONFIG_SYS_SDRAM_BASE + 0x1000 - GENERATED_GBL_DATA_SIZE) - -#endif /* __CONFIG_H */ diff --git a/include/configs/davinci_dm6467evm.h b/include/configs/davinci_dm6467evm.h deleted file mode 100644 index 6346422..0000000 --- a/include/configs/davinci_dm6467evm.h +++ /dev/null @@ -1,138 +0,0 @@ -/* - * Copyright (C) 2009 Texas Instruments Incorporated - * - * SPDX-License-Identifier: GPL-2.0+ - */ - -#ifndef __CONFIG_H -#define __CONFIG_H - -/* Spectrum Digital TMS320DM6467 EVM board */ -#define DAVINCI_DM6467EVM -#define CONFIG_SYS_USE_NAND -#define CONFIG_SYS_NAND_SMALLPAGE - -#define CONFIG_SKIP_LOWLEVEL_INIT - -/* SoC Configuration */ - -/* Clock rates detection */ -#ifndef __ASSEMBLY__ -extern unsigned int davinci_arm_clk_get(void); -#endif - -/* Arm Clock frequency */ -#define CONFIG_SYS_CLK_FREQ davinci_arm_clk_get() -/* Timer Input clock freq */ -#define CONFIG_SYS_HZ_CLOCK (CONFIG_SYS_CLK_FREQ/2) -#define CONFIG_SYS_TIMERBASE 0x01c21400 /* use timer 0 */ -#define CONFIG_SOC_DM646X - -/* EEPROM definitions for EEPROM */ -#define CONFIG_SYS_I2C_EEPROM_ADDR_LEN 2 -#define CONFIG_SYS_I2C_EEPROM_ADDR 0x50 -#define CONFIG_SYS_EEPROM_PAGE_WRITE_BITS 6 -#define CONFIG_SYS_EEPROM_PAGE_WRITE_DELAY_MS 20 - -/* Memory Info */ -#define CONFIG_SYS_MALLOC_LEN (1 << 20) /* 1 MiB */ -#define CONFIG_SYS_MEMTEST_START 0x80000000 -#define CONFIG_SYS_MEMTEST_END 0x81000000 /* 16MB RAM test */ -#define CONFIG_NR_DRAM_BANKS 1 -#define PHYS_SDRAM_1 0x80000000 /* DDR Start */ -#define PHYS_SDRAM_1_SIZE (256 << 20) /* DDR size 256MB */ - -/* Linux interfacing */ -#define CONFIG_CMDLINE_TAG -#define CONFIG_SETUP_MEMORY_TAGS -#define CONFIG_SYS_BARGSIZE 1024 /* Bootarg Size */ -#define CONFIG_SYS_LOAD_ADDR 0x80700000 /* kernel address */ -#define CONFIG_REVISION_TAG - -/* Serial Driver info */ -#define CONFIG_SYS_NS16550 -#define CONFIG_SYS_NS16550_SERIAL -#define CONFIG_SYS_NS16550_REG_SIZE 4 -#define CONFIG_SYS_NS16550_COM1 0x01c20000 -#define CONFIG_SYS_NS16550_CLK 24000000 -#define CONFIG_CONS_INDEX 1 -#define CONFIG_BAUDRATE 115200 - -/* I2C Configuration */ -#define CONFIG_SYS_I2C -#define CONFIG_SYS_I2C_DAVINCI -#define CONFIG_SYS_DAVINCI_I2C_SPEED 80000 -#define CONFIG_SYS_DAVINCI_I2C_SLAVE 10 - -/* Network & Ethernet Configuration */ -#define CONFIG_DRIVER_TI_EMAC -#define CONFIG_MII -#define CONFIG_BOOTP_DNS -#define CONFIG_BOOTP_DNS2 -#define CONFIG_BOOTP_SEND_HOSTNAME -#define CONFIG_NET_RETRY_COUNT 10 - -/* Flash & Environment */ -#define CONFIG_SYS_NO_FLASH -#ifdef CONFIG_SYS_USE_NAND -#define CONFIG_NAND_DAVINCI -#define CONFIG_SYS_NAND_MASK_CLE 0x80000 -#define CONFIG_SYS_NAND_MASK_ALE 0x40000 -#define CONFIG_SYS_NAND_CS 2 -#undef CONFIG_ENV_IS_IN_FLASH -#define CONFIG_ENV_IS_IN_NAND -#define CONFIG_ENV_SIZE (16 << 10) /* 16 KiB */ -#define CONFIG_SYS_NAND_BASE_LIST {0x42000000, } -#define CONFIG_SYS_NAND_HW_ECC -#define CONFIG_SYS_MAX_NAND_DEVICE 1 -#define CONFIG_ENV_OFFSET 0 -#else -#define CONFIG_ENV_IS_NOWHERE -#define CONFIG_ENV_SIZE (4 << 10) /* 4 KiB */ -#endif - -/* U-Boot general configuration */ -#define CONFIG_BOOTDELAY 3 -#define CONFIG_BOOTFILE "uImage" /* Boot file name */ -#define CONFIG_SYS_CBSIZE 1024 /* Console I/O Buffer Size */ -#define CONFIG_SYS_PBSIZE \ - (CONFIG_SYS_CBSIZE + sizeof(CONFIG_SYS_PROMPT) + 16) -#define CONFIG_SYS_MAXARGS 16 -#define CONFIG_VERSION_VARIABLE -#define CONFIG_AUTO_COMPLETE -#define CONFIG_SYS_HUSH_PARSER -#define CONFIG_CMDLINE_EDITING -#define CONFIG_SYS_LONGHELP -#define CONFIG_CRC32_VERIFY -#define CONFIG_MX_CYCLIC -#define CONFIG_BOOTCOMMAND "source 0x82080000; dhcp; bootm" -#define CONFIG_BOOTARGS \ - "mem=120M console=ttyS0,115200n8 " \ - "root=/dev/hda1 rw noinitrd ip=dhcp" - -/* U-Boot commands */ -#define CONFIG_CMD_ASKENV -#define CONFIG_CMD_DIAG -#define CONFIG_CMD_I2C -#define CONFIG_CMD_MII -#define CONFIG_CMD_SAVES -#define CONFIG_CMD_EEPROM -#define CONFIG_CMD_PING -#define CONFIG_CMD_DHCP -#ifdef CONFIG_SYS_USE_NAND -#define CONFIG_CMD_NAND -#endif - -#ifdef CONFIG_CMD_BDI -#define CONFIG_CLOCKS -#endif - -#define CONFIG_MAX_RAM_BANK_SIZE (256 << 20) /* 256 MB */ - -#define CONFIG_SYS_SDRAM_BASE PHYS_SDRAM_1 -#define CONFIG_SYS_INIT_RAM_SIZE 0x1000 -#define CONFIG_SYS_INIT_SP_ADDR (CONFIG_SYS_SDRAM_BASE + \ - CONFIG_SYS_INIT_RAM_SIZE - \ - GENERATED_GBL_DATA_SIZE) - -#endif /* __CONFIG_H */ diff --git a/include/configs/davinci_dvevm.h b/include/configs/davinci_dvevm.h deleted file mode 100644 index 15d8150..0000000 --- a/include/configs/davinci_dvevm.h +++ /dev/null @@ -1,216 +0,0 @@ -/* - * Copyright (C) 2007 Sergey Kubushyn ksi@koi8.net - * - * SPDX-License-Identifier: GPL-2.0+ - */ - -#ifndef __CONFIG_H -#define __CONFIG_H - -/* - * Define this to make U-Boot skip low level initialization when loaded - * by initial bootloader. Not required by NAND U-Boot version but IS - * required for a NOR version used to burn the real NOR U-Boot into - * NOR Flash. NAND and NOR support for DaVinci chips is mutually exclusive - * so it is NOT possible to build a U-Boot with both NAND and NOR routines. - * NOR U-Boot is loaded directly from Flash so it must perform all the - * low level initialization itself. NAND version is loaded by an initial - * bootloader (UBL in TI-ese) that performs such an initialization so it's - * skipped in NAND version. The third DaVinci boot mode loads a bootloader - * via UART0 and that bootloader in turn loads and runs U-Boot (or whatever) - * performing low level init prior to loading. All that means we can NOT use - * NAND version to put U-Boot into NOR because it doesn't have NOR support and - * we can NOT use NOR version because it performs low level initialization - * effectively destroying itself in DDR memory. That's why a separate NOR - * version with this define is needed. It is loaded via UART, then one uses - * it to somehow download a proper NOR version built WITHOUT this define to - * RAM (tftp?) and burn it to NOR Flash. I would be probably able to squeeze - * NOR support into the initial bootloader so it won't be needed but DaVinci - * static RAM might be too small for this (I have something like 2Kbytes left - * as of now, without NOR support) so this might've not happened... - * -#define CONFIG_NOR_UART_BOOT - */ - -/*=======*/ -/* Board */ -/*=======*/ -#define DV_EVM -#define CONFIG_SYS_NAND_SMALLPAGE -#define CONFIG_SYS_USE_NAND -/*===================*/ -/* SoC Configuration */ -/*===================*/ -#define CONFIG_SYS_TIMERBASE 0x01c21400 /* use timer 0 */ -#define CONFIG_SYS_HZ_CLOCK 27000000 /* Timer Input clock freq */ -#define CONFIG_SOC_DM644X -/*====================================================*/ -/* EEPROM definitions for Atmel 24C256BN SEEPROM chip */ -/* on Sonata/DV_EVM board. No EEPROM on schmoogie. */ -/*====================================================*/ -#define CONFIG_SYS_I2C_EEPROM_ADDR_LEN 2 -#define CONFIG_SYS_I2C_EEPROM_ADDR 0x50 -#define CONFIG_SYS_EEPROM_PAGE_WRITE_BITS 6 -#define CONFIG_SYS_EEPROM_PAGE_WRITE_DELAY_MS 20 -/*=============*/ -/* Memory Info */ -/*=============*/ -#define CONFIG_SYS_MALLOC_LEN (0x10000 + 128*1024) /* malloc() len */ -#define CONFIG_SYS_MEMTEST_START 0x80000000 /* memtest start address */ -#define CONFIG_SYS_MEMTEST_END 0x81000000 /* 16MB RAM test */ -#define CONFIG_NR_DRAM_BANKS 1 /* we have 1 bank of DRAM */ -#define PHYS_SDRAM_1 0x80000000 /* DDR Start */ -#define PHYS_SDRAM_1_SIZE 0x10000000 /* DDR size 256MB */ - -#define DDR_8BANKS /* 8-bank DDR2 (256MB) */ -/*====================*/ -/* Serial Driver info */ -/*====================*/ -#define CONFIG_SYS_NS16550 -#define CONFIG_SYS_NS16550_SERIAL -#define CONFIG_SYS_NS16550_REG_SIZE -4 /* NS16550 register size, byteorder */ -#define CONFIG_SYS_NS16550_COM1 0x01c20000 /* Base address of UART0 */ -#define CONFIG_SYS_NS16550_CLK CONFIG_SYS_HZ_CLOCK /* Input clock to NS16550 */ -#define CONFIG_CONS_INDEX 1 /* use UART0 for console */ -#define CONFIG_BAUDRATE 115200 /* Default baud rate */ -/*===================*/ -/* I2C Configuration */ -/*===================*/ -#define CONFIG_SYS_I2C -#define CONFIG_SYS_I2C_DAVINCI -#define CONFIG_SYS_DAVINCI_I2C_SPEED 80000 /* 100Kbps won't work, silicon bug */ -#define CONFIG_SYS_DAVINCI_I2C_SLAVE 10 /* Bogus, master-only in U-Boot */ -/*==================================*/ -/* Network & Ethernet Configuration */ -/*==================================*/ -#define CONFIG_DRIVER_TI_EMAC -#define CONFIG_MII -#define CONFIG_BOOTP_DNS -#define CONFIG_BOOTP_DNS2 -#define CONFIG_BOOTP_SEND_HOSTNAME -#define CONFIG_NET_RETRY_COUNT 10 -/*=====================*/ -/* Flash & Environment */ -/*=====================*/ -#ifdef CONFIG_SYS_USE_NAND -#define CONFIG_NAND_DAVINCI -#define CONFIG_SYS_NAND_CS 2 -#undef CONFIG_ENV_IS_IN_FLASH -#define CONFIG_SYS_NO_FLASH -#define CONFIG_ENV_IS_IN_NAND /* U-Boot env in NAND Flash */ -#ifdef CONFIG_SYS_NAND_SMALLPAGE -#define CONFIG_ENV_SECT_SIZE 512 /* Env sector Size */ -#define CONFIG_ENV_SIZE (16 << 10) /* 16 KiB */ -#define CONFIG_MTD_PARTITIONS -#define CONFIG_MTD_DEVICE -#define CONFIG_CMD_MTDPARTS -#define MTDIDS_DEFAULT \ - "nand0=davinci_nand.0" -#define MTDPARTS_DEFAULT \ - "mtdparts=davinci_nand.0:384k(bootloader)ro,4m(kernel),-(filesystem)" -#else -#define CONFIG_ENV_SECT_SIZE 2048 /* Env sector Size */ -#define CONFIG_ENV_SIZE (128 << 10) /* 128 KiB */ -#endif -#define CONFIG_SKIP_LOWLEVEL_INIT /* U-Boot is loaded by a bootloader */ -#define CONFIG_SYS_NAND_BASE 0x02000000 -#define CONFIG_SYS_NAND_USE_FLASH_BBT -#define CONFIG_SYS_NAND_HW_ECC -#define CONFIG_SYS_MAX_NAND_DEVICE 1 /* Max number of NAND devices */ -#define CONFIG_ENV_OFFSET 0x0 /* Block 0--not used by bootcode */ -#elif defined(CONFIG_SYS_USE_NOR) -#ifdef CONFIG_NOR_UART_BOOT -#define CONFIG_SKIP_LOWLEVEL_INIT /* U-Boot is loaded by a bootloader */ -#else -#undef CONFIG_SKIP_LOWLEVEL_INIT -#endif -#define CONFIG_ENV_IS_IN_FLASH -#undef CONFIG_SYS_NO_FLASH -#define CONFIG_FLASH_CFI_DRIVER -#define CONFIG_SYS_FLASH_CFI -#define CONFIG_SYS_MAX_FLASH_BANKS 1 /* max number of flash banks */ -#define CONFIG_SYS_FLASH_SECT_SZ 0x10000 /* 64KB sect size AMD Flash */ -#define CONFIG_ENV_OFFSET (CONFIG_SYS_FLASH_SECT_SZ*3) -#define PHYS_FLASH_1 0x02000000 /* CS2 Base address */ -#define CONFIG_SYS_FLASH_BASE PHYS_FLASH_1 /* Flash Base for U-Boot */ -#define PHYS_FLASH_SIZE 0x2000000 /* Flash size 32MB */ -#define CONFIG_SYS_MAX_FLASH_SECT (PHYS_FLASH_SIZE/CONFIG_SYS_FLASH_SECT_SZ) -#define CONFIG_ENV_SECT_SIZE CONFIG_SYS_FLASH_SECT_SZ /* Env sector Size */ -#endif -/*==============================*/ -/* U-Boot general configuration */ -/*==============================*/ -#define CONFIG_MISC_INIT_R -#undef CONFIG_BOOTDELAY -#define CONFIG_BOOTFILE "uImage" /* Boot file name */ -#define CONFIG_SYS_CBSIZE 1024 /* Console I/O Buffer Size */ -#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16) /* Print buffer sz */ -#define CONFIG_SYS_MAXARGS 16 /* max number of command args */ -#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE /* Boot Argument Buffer Size */ -#define CONFIG_SYS_LOAD_ADDR 0x80700000 /* default Linux kernel load address */ -#define CONFIG_VERSION_VARIABLE -#define CONFIG_AUTO_COMPLETE /* Won't work with hush so far, may be later */ -#define CONFIG_SYS_HUSH_PARSER -#define CONFIG_CMDLINE_EDITING -#define CONFIG_SYS_LONGHELP -#define CONFIG_CRC32_VERIFY -#define CONFIG_MX_CYCLIC -#define CONFIG_USB_MUSB_HCD -#define CONFIG_USB_DAVINCI -/*===================*/ -/* Linux Information */ -/*===================*/ -#define LINUX_BOOT_PARAM_ADDR 0x80000100 -#define CONFIG_CMDLINE_TAG -#define CONFIG_SETUP_MEMORY_TAGS -#define CONFIG_BOOTARGS "mem=120M console=ttyS0,115200n8 root=/dev/hda1 rw noinitrd ip=dhcp" -#define CONFIG_BOOTCOMMAND "setenv setboot setenv bootargs \$(bootargs) video=dm64xxfb:output=\$(videostd);run setboot; bootm 0x2050000" -/*=================*/ -/* U-Boot commands */ -/*=================*/ -#define CONFIG_CMD_ASKENV -#define CONFIG_CMD_DHCP -#define CONFIG_CMD_DIAG -#define CONFIG_CMD_I2C -#define CONFIG_CMD_MII -#define CONFIG_CMD_PING -#define CONFIG_CMD_SAVES -#define CONFIG_CMD_EEPROM - -#ifdef CONFIG_CMD_BDI -#define CONFIG_CLOCKS -#endif - -#ifdef CONFIG_SYS_USE_NAND -#define CONFIG_CMD_NAND -#elif defined(CONFIG_SYS_USE_NOR) -#define CONFIG_CMD_JFFS2 -#else -#error "Either CONFIG_SYS_USE_NAND or CONFIG_SYS_USE_NOR _MUST_ be defined !!!" -#endif -/*==========================*/ -/* USB MSC support (if any) */ -/*==========================*/ -#ifdef CONFIG_USB_DAVINCI -#define CONFIG_CMD_USB -#ifdef CONFIG_USB_MUSB_HCD -#define CONFIG_USB_STORAGE -#define CONFIG_CMD_STORAGE -#define CONFIG_CMD_FAT -#define CONFIG_DOS_PARTITION -#endif -#ifdef CONFIG_USB_KEYBOARD -#define CONFIG_SYS_USB_EVENT_POLL -#define CONFIG_PREBOOT "usb start" -#endif -#endif - -#define CONFIG_MAX_RAM_BANK_SIZE (256 << 20) /* 256 MB */ - -#define CONFIG_SYS_SDRAM_BASE PHYS_SDRAM_1 -#define CONFIG_SYS_INIT_RAM_SIZE 0x1000 -#define CONFIG_SYS_INIT_SP_ADDR (CONFIG_SYS_SDRAM_BASE + \ - CONFIG_SYS_INIT_RAM_SIZE - \ - GENERATED_GBL_DATA_SIZE) - -#endif /* __CONFIG_H */ diff --git a/include/configs/davinci_schmoogie.h b/include/configs/davinci_schmoogie.h deleted file mode 100644 index bc5e1ca..0000000 --- a/include/configs/davinci_schmoogie.h +++ /dev/null @@ -1,136 +0,0 @@ -/* - * Copyright (C) 2007 Sergey Kubushyn ksi@koi8.net - * - * SPDX-License-Identifier: GPL-2.0+ - */ - -#ifndef __CONFIG_H -#define __CONFIG_H - -/*=======*/ -/* Board */ -/*=======*/ -#define SCHMOOGIE -#define CONFIG_SYS_NAND_LARGEPAGE -#define CONFIG_SYS_USE_NAND -#define MACH_TYPE_SCHMOOGIE 1255 -#define CONFIG_MACH_TYPE MACH_TYPE_SCHMOOGIE - -/*===================*/ -/* SoC Configuration */ -/*===================*/ -#define CONFIG_SYS_TIMERBASE 0x01c21400 /* use timer 0 */ -#define CONFIG_SYS_HZ_CLOCK 27000000 /* Timer Input clock freq */ -#define CONFIG_SOC_DM644X -/*=============*/ -/* Memory Info */ -/*=============*/ -#define CONFIG_SYS_MALLOC_LEN (0x10000 + 256*1024) /* malloc() len */ -#define CONFIG_SYS_MEMTEST_START 0x80000000 /* memtest start address */ -#define CONFIG_SYS_MEMTEST_END 0x81000000 /* 16MB RAM test */ -#define CONFIG_NR_DRAM_BANKS 1 /* we have 1 bank of DRAM */ -#define PHYS_SDRAM_1 0x80000000 /* DDR Start */ -#define PHYS_SDRAM_1_SIZE 0x08000000 /* DDR size 128MB */ -#define DDR_4BANKS /* 4-bank DDR2 (128MB) */ -/*====================*/ -/* Serial Driver info */ -/*====================*/ -#define CONFIG_SYS_NS16550 -#define CONFIG_SYS_NS16550_SERIAL -#define CONFIG_SYS_NS16550_REG_SIZE -4 /* NS16550 register size, byteorder */ -#define CONFIG_SYS_NS16550_COM1 0x01c20000 /* Base address of UART0 */ -#define CONFIG_SYS_NS16550_CLK CONFIG_SYS_HZ_CLOCK /* Input clock to NS16550 */ -#define CONFIG_CONS_INDEX 1 /* use UART0 for console */ -#define CONFIG_BAUDRATE 115200 /* Default baud rate */ -/*===================*/ -/* I2C Configuration */ -/*===================*/ -#define CONFIG_SYS_I2C -#define CONFIG_SYS_I2C_DAVINCI -#define CONFIG_SYS_DAVINCI_I2C_SPEED 80000 /* 100Kbps won't work, silicon bug */ -#define CONFIG_SYS_DAVINCI_I2C_SLAVE 10 /* Bogus, master-only in U-Boot */ -/*==================================*/ -/* Network & Ethernet Configuration */ -/*==================================*/ -#define CONFIG_DRIVER_TI_EMAC -#define CONFIG_MII -#define CONFIG_BOOTP_DNS -#define CONFIG_BOOTP_DNS2 -#define CONFIG_BOOTP_SEND_HOSTNAME -#define CONFIG_NET_RETRY_COUNT 10 -#define CONFIG_OVERWRITE_ETHADDR_ONCE -/*=====================*/ -/* Flash & Environment */ -/*=====================*/ -#undef CONFIG_ENV_IS_IN_FLASH -#define CONFIG_SYS_NO_FLASH -#define CONFIG_NAND_DAVINCI -#define CONFIG_SYS_NAND_CS 2 -#define CONFIG_ENV_IS_IN_NAND /* U-Boot env in NAND Flash */ -#define CONFIG_ENV_SECT_SIZE 2048 /* Env sector Size */ -#define CONFIG_ENV_SIZE (128 << 10) /* 128 KiB */ -#define CONFIG_SKIP_LOWLEVEL_INIT /* U-Boot is loaded by a bootloader */ -#define CONFIG_SYS_NAND_BASE 0x02000000 -#define CONFIG_SYS_NAND_HW_ECC -#define CONFIG_SYS_MAX_NAND_DEVICE 1 /* Max number of NAND devices */ -#define CONFIG_ENV_OFFSET 0x0 /* Block 0--not used by bootcode */ -/*=====================*/ -/* Board related stuff */ -/*=====================*/ -#define CONFIG_RTC_DS1307 /* RTC chip on SCHMOOGIE */ -#define CONFIG_SYS_I2C_RTC_ADDR 0x6f /* RTC chip I2C address */ -#define CONFIG_UID_DS28CM00 /* Unique ID on SCHMOOGIE */ -#define CONFIG_SYS_UID_ADDR 0x50 /* UID chip I2C address */ -/*==============================*/ -/* U-Boot general configuration */ -/*==============================*/ -#define CONFIG_MISC_INIT_R -#undef CONFIG_BOOTDELAY -#define CONFIG_BOOTFILE "uImage" /* Boot file name */ -#define CONFIG_SYS_CBSIZE 1024 /* Console I/O Buffer Size */ -#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16) /* Print buffer sz */ -#define CONFIG_SYS_MAXARGS 16 /* max number of command args */ -#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE /* Boot Argument Buffer Size */ -#define CONFIG_SYS_LOAD_ADDR 0x80700000 /* default Linux kernel load address */ -#define CONFIG_VERSION_VARIABLE -#define CONFIG_AUTO_COMPLETE /* Won't work with hush so far, may be later */ -#define CONFIG_SYS_HUSH_PARSER -#define CONFIG_CMDLINE_EDITING -#define CONFIG_SYS_LONGHELP -#define CONFIG_CRC32_VERIFY -#define CONFIG_MX_CYCLIC -/*===================*/ -/* Linux Information */ -/*===================*/ -#define LINUX_BOOT_PARAM_ADDR 0x80000100 -#define CONFIG_CMDLINE_TAG -#define CONFIG_SETUP_MEMORY_TAGS -#define CONFIG_BOOTARGS "mem=56M console=ttyS0,115200n8 root=/dev/hda1 rw noinitrd ip=dhcp" -#define CONFIG_BOOTCOMMAND "setenv setboot setenv bootargs \$(bootargs) video=dm64xxfb:output=\$(videostd);run setboot" -/*=================*/ -/* U-Boot commands */ -/*=================*/ -#define CONFIG_CMD_ASKENV -#define CONFIG_CMD_DHCP -#define CONFIG_CMD_DIAG -#define CONFIG_CMD_I2C -#define CONFIG_CMD_MII -#define CONFIG_CMD_PING -#define CONFIG_CMD_SAVES -#define CONFIG_CMD_DATE -#define CONFIG_CMD_NAND -#undef CONFIG_CMD_EEPROM - -#ifdef CONFIG_CMD_BDI -#define CONFIG_CLOCKS -#endif - -#define CONFIG_MAX_RAM_BANK_SIZE (256 << 20) /* 256 MB */ - -#define CONFIG_SYS_SDRAM_BASE PHYS_SDRAM_1 -#define CONFIG_SYS_INIT_RAM_SIZE 0x1000 -#define CONFIG_SYS_INIT_SP_ADDR (CONFIG_SYS_SDRAM_BASE + \ - CONFIG_SYS_INIT_RAM_SIZE - \ - GENERATED_GBL_DATA_SIZE) - -#endif /* __CONFIG_H */ diff --git a/include/configs/davinci_sffsdr.h b/include/configs/davinci_sffsdr.h deleted file mode 100644 index e719388..0000000 --- a/include/configs/davinci_sffsdr.h +++ /dev/null @@ -1,129 +0,0 @@ -/* - * Copyright (C) 2007 Sergey Kubushyn ksi@koi8.net - * - * Copyright (C) 2008 Lyrtech <www.lyrtech.com> - * Copyright (C) 2008 Philip Balister, OpenSDR philip@opensdr.com - * - * SPDX-License-Identifier: GPL-2.0+ - */ - -#ifndef __CONFIG_H -#define __CONFIG_H - -/* Board */ -#define SFFSDR -#define CONFIG_SYS_NAND_LARGEPAGE -#define CONFIG_SYS_USE_NAND -#define CONFIG_SYS_USE_DSPLINK /* don't power up the DSP. */ -/* SoC Configuration */ -#define CONFIG_SYS_TIMERBASE 0x01c21400 /* use timer 0 */ -#define CONFIG_SYS_HZ_CLOCK 27000000 /* Timer Input clock freq */ -#define CONFIG_SOC_DM644X -/* EEPROM definitions for Atmel 24LC64 EEPROM chip */ -#define CONFIG_SYS_I2C_EEPROM_ADDR_LEN 2 -#define CONFIG_SYS_I2C_EEPROM_ADDR 0x50 -#define CONFIG_SYS_EEPROM_PAGE_WRITE_BITS 5 -#define CONFIG_SYS_EEPROM_PAGE_WRITE_DELAY_MS 20 -/* Memory Info */ -#define CONFIG_SYS_MALLOC_LEN (0x10000 + 256*1024) /* malloc() len */ -#define CONFIG_SYS_MEMTEST_START 0x80000000 /* memtest start address */ -#define CONFIG_SYS_MEMTEST_END 0x81000000 /* 16MB RAM test */ -#define CONFIG_NR_DRAM_BANKS 1 /* we have 1 bank of DRAM */ -#define PHYS_SDRAM_1 0x80000000 /* DDR Start */ -#define PHYS_SDRAM_1_SIZE 0x08000000 /* DDR size 128MB */ -#define DDR_4BANKS /* 4-bank DDR2 (128MB) */ -/* Serial Driver info */ -#define CONFIG_SYS_NS16550 -#define CONFIG_SYS_NS16550_SERIAL -#define CONFIG_SYS_NS16550_REG_SIZE -4 /* NS16550 register size, byteorder */ -#define CONFIG_SYS_NS16550_COM1 0x01c20000 /* Base address of UART0 */ -#define CONFIG_SYS_NS16550_CLK CONFIG_SYS_HZ_CLOCK /* Input clock to NS16550 */ -#define CONFIG_CONS_INDEX 1 /* use UART0 for console */ -#define CONFIG_BAUDRATE 115200 /* Default baud rate */ -/* I2C Configuration */ -#define CONFIG_SYS_I2C -#define CONFIG_SYS_I2C_DAVINCI -#define CONFIG_SYS_DAVINCI_I2C_SPEED 80000 /* 100Kbps won't work, silicon bug */ -#define CONFIG_SYS_DAVINCI_I2C_SLAVE 10 /* Bogus, master-only in U-Boot */ -/* Network & Ethernet Configuration */ -#define CONFIG_DRIVER_TI_EMAC -#define CONFIG_MII -#define CONFIG_BOOTP_DNS -#define CONFIG_BOOTP_DNS2 -#define CONFIG_BOOTP_SEND_HOSTNAME -#define CONFIG_NET_RETRY_COUNT 10 -#define CONFIG_OVERWRITE_ETHADDR_ONCE -/* Flash & Environment */ -#undef CONFIG_ENV_IS_IN_FLASH -#define CONFIG_SYS_NO_FLASH -#define CONFIG_NAND_DAVINCI -#define CONFIG_SYS_NAND_CS 2 -#define CONFIG_ENV_IS_IN_NAND /* U-Boot env in NAND Flash */ -#define CONFIG_ENV_SECT_SIZE 2048 /* Env sector Size */ -#define CONFIG_ENV_SIZE (128 << 10) /* 128 KiB */ -#define CONFIG_SKIP_LOWLEVEL_INIT /* U-Boot is loaded by a bootloader */ -#define CONFIG_SYS_NAND_BASE 0x02000000 -#define CONFIG_SYS_NAND_HW_ECC -#define CONFIG_SYS_MAX_NAND_DEVICE 1 /* Max number of NAND devices */ -#define CONFIG_ENV_OFFSET 0x0 /* Block 0--not used by bootcode */ -/* I2C switch definitions for PCA9543 chip */ -#define CONFIG_SYS_I2C_PCA9543_ADDR 0x70 -#define CONFIG_SYS_I2C_PCA9543_ADDR_LEN 0 /* Single register. */ -#define CONFIG_SYS_I2C_PCA9543_ENABLE_CH0 0x01 /* Enable channel 0. */ -/* U-Boot general configuration */ -#define CONFIG_MISC_INIT_R -#define CONFIG_BOOTDELAY 5 /* Autoboot after 5 seconds. */ -#define CONFIG_BOOTFILE "uImage" /* Boot file name */ -#define CONFIG_SYS_CBSIZE 1024 /* Console I/O Buffer Size */ -#define CONFIG_SYS_PBSIZE \ - (CONFIG_SYS_CBSIZE + sizeof(CONFIG_SYS_PROMPT) + 16) /* Print buffer size */ -#define CONFIG_SYS_MAXARGS 16 /* max number of command args */ -#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE /* Boot Argument Buffer Size */ -#define CONFIG_SYS_LOAD_ADDR 0x80700000 /* Default Linux kernel - * load address. */ -#define CONFIG_VERSION_VARIABLE -#define CONFIG_AUTO_COMPLETE /* Won't work with hush so far, - * may be later */ -#define CONFIG_SYS_HUSH_PARSER -#define CONFIG_CMDLINE_EDITING -#define CONFIG_SYS_LONGHELP -#define CONFIG_CRC32_VERIFY -#define CONFIG_MX_CYCLIC -/* Linux Information */ -#define LINUX_BOOT_PARAM_ADDR 0x80000100 -#define CONFIG_CMDLINE_TAG -#define CONFIG_SETUP_MEMORY_TAGS -#define CONFIG_BOOTARGS \ - "mem=56M " \ - "console=ttyS0,115200n8 " \ - "root=/dev/nfs rw noinitrd ip=dhcp " \ - "nfsroot=${serverip}:/nfsroot/sffsdr " \ - "eth0=${ethaddr}" -#define CONFIG_BOOTCOMMAND \ - "nand read 87A00000 100000 300000;" \ - "bootelf 87A00000" -/* U-Boot commands */ -#define CONFIG_CMD_ASKENV -#define CONFIG_CMD_DHCP -#define CONFIG_CMD_DIAG -#define CONFIG_CMD_I2C -#define CONFIG_CMD_MII -#define CONFIG_CMD_PING -#define CONFIG_CMD_SAVES -#define CONFIG_CMD_NAND -#define CONFIG_CMD_EEPROM -#define CONFIG_CMD_ELF /* Needed to load Integrity kernel. */ - -#ifdef CONFIG_CMD_BDI -#define CONFIG_CLOCKS -#endif - -#define CONFIG_MAX_RAM_BANK_SIZE (256 << 20) /* 256 MB */ - -#define CONFIG_SYS_SDRAM_BASE PHYS_SDRAM_1 -#define CONFIG_SYS_INIT_RAM_SIZE 0x1000 -#define CONFIG_SYS_INIT_SP_ADDR (CONFIG_SYS_SDRAM_BASE + \ - CONFIG_SYS_INIT_RAM_SIZE - \ - GENERATED_GBL_DATA_SIZE) - -#endif /* __CONFIG_H */ diff --git a/include/configs/davinci_sonata.h b/include/configs/davinci_sonata.h deleted file mode 100644 index b85c988..0000000 --- a/include/configs/davinci_sonata.h +++ /dev/null @@ -1,187 +0,0 @@ -/* - * Copyright (C) 2007 Sergey Kubushyn ksi@koi8.net - * - * SPDX-License-Identifier: GPL-2.0+ - */ - -#ifndef __CONFIG_H -#define __CONFIG_H - -/* - * Define this to make U-Boot skip low level initialization when loaded - * by initial bootloader. Not required by NAND U-Boot version but IS - * required for a NOR version used to burn the real NOR U-Boot into - * NOR Flash. NAND and NOR support for DaVinci chips is mutually exclusive - * so it is NOT possible to build a U-Boot with both NAND and NOR routines. - * NOR U-Boot is loaded directly from Flash so it must perform all the - * low level initialization itself. NAND version is loaded by an initial - * bootloader (UBL in TI-ese) that performs such an initialization so it's - * skipped in NAND version. The third DaVinci boot mode loads a bootloader - * via UART0 and that bootloader in turn loads and runs U-Boot (or whatever) - * performing low level init prior to loading. All that means we can NOT use - * NAND version to put U-Boot into NOR because it doesn't have NOR support and - * we can NOT use NOR version because it performs low level initialization - * effectively destroying itself in DDR memory. That's why a separate NOR - * version with this define is needed. It is loaded via UART, then one uses - * it to somehow download a proper NOR version built WITHOUT this define to - * RAM (tftp?) and burn it to NOR Flash. I would be probably able to squeeze - * NOR support into the initial bootloader so it won't be needed but DaVinci - * static RAM might be too small for this (I have something like 2Kbytes left - * as of now, without NOR support) so this might've not happened... - * -#define CONFIG_NOR_UART_BOOT - */ - -/*=======*/ -/* Board */ -/*=======*/ -#define SONATA_BOARD -#define CONFIG_SYS_NAND_SMALLPAGE -#define CONFIG_SYS_USE_NOR -#define MACH_TYPE_SONATA 1254 -#define CONFIG_MACH_TYPE MACH_TYPE_SONATA -/*===================*/ -/* SoC Configuration */ -/*===================*/ -#define CONFIG_SYS_TIMERBASE 0x01c21400 /* use timer 0 */ -#define CONFIG_SYS_HZ_CLOCK 27000000 /* Timer Input clock freq */ -#define CONFIG_SOC_DM644X -/*====================================================*/ -/* EEPROM definitions for Atmel 24C256BN SEEPROM chip */ -/* on Sonata/DV_EVM board. No EEPROM on schmoogie. */ -/*====================================================*/ -#define CONFIG_SYS_I2C_EEPROM_ADDR_LEN 2 -#define CONFIG_SYS_I2C_EEPROM_ADDR 0x50 -#define CONFIG_SYS_EEPROM_PAGE_WRITE_BITS 6 -#define CONFIG_SYS_EEPROM_PAGE_WRITE_DELAY_MS 20 -/*=============*/ -/* Memory Info */ -/*=============*/ -#define CONFIG_SYS_MALLOC_LEN (0x10000 + 128*1024) /* malloc() len */ -#define CONFIG_SYS_MEMTEST_START 0x80000000 /* memtest start address */ -#define CONFIG_SYS_MEMTEST_END 0x81000000 /* 16MB RAM test */ -#define CONFIG_NR_DRAM_BANKS 1 /* we have 1 bank of DRAM */ -#define PHYS_SDRAM_1 0x80000000 /* DDR Start */ -#define PHYS_SDRAM_1_SIZE 0x08000000 /* DDR size 128MB */ -#define DDR_4BANKS /* 4-bank DDR2 (128MB) */ -/*====================*/ -/* Serial Driver info */ -/*====================*/ -#define CONFIG_SYS_NS16550 -#define CONFIG_SYS_NS16550_SERIAL -#define CONFIG_SYS_NS16550_REG_SIZE -4 /* NS16550 register size, byteorder */ -#define CONFIG_SYS_NS16550_COM1 0x01c20000 /* Base address of UART0 */ -#define CONFIG_SYS_NS16550_CLK CONFIG_SYS_HZ_CLOCK /* Input clock to NS16550 */ -#define CONFIG_CONS_INDEX 1 /* use UART0 for console */ -#define CONFIG_BAUDRATE 115200 /* Default baud rate */ -/*===================*/ -/* I2C Configuration */ -/*===================*/ -#define CONFIG_SYS_I2C -#define CONFIG_SYS_I2C_DAVINCI -#define CONFIG_SYS_DAVINCI_I2C_SPEED 80000 /* 100Kbps won't work, silicon bug */ -#define CONFIG_SYS_DAVINCI_I2C_SLAVE 10 /* Bogus, master-only in U-Boot */ -/*==================================*/ -/* Network & Ethernet Configuration */ -/*==================================*/ -#define CONFIG_DRIVER_TI_EMAC -#define CONFIG_MII -#define CONFIG_BOOTP_DNS -#define CONFIG_BOOTP_DNS2 -#define CONFIG_BOOTP_SEND_HOSTNAME -#define CONFIG_NET_RETRY_COUNT 10 -/*=====================*/ -/* Flash & Environment */ -/*=====================*/ -#ifdef CONFIG_SYS_USE_NAND -#define CONFIG_NAND_DAVINCI -#define CONFIG_SYS_NAND_CS 2 -#undef CONFIG_ENV_IS_IN_FLASH -#define CONFIG_SYS_NO_FLASH -#define CONFIG_ENV_OVERWRITE /* instead if obsoleted forceenv() */ -#define CONFIG_ENV_IS_IN_NAND /* U-Boot env in NAND Flash */ -#define CONFIG_ENV_SECT_SIZE 512 /* Env sector Size */ -#define CONFIG_ENV_SIZE (16 << 10) /* 16 KiB */ -#define CONFIG_SKIP_LOWLEVEL_INIT /* U-Boot is loaded by a bootloader */ -#define CONFIG_SYS_NAND_BASE 0x02000000 -#define CONFIG_SYS_NAND_HW_ECC -#define CONFIG_SYS_MAX_NAND_DEVICE 1 /* Max number of NAND devices */ -#define CONFIG_ENV_OFFSET 0x0 /* Block 0--not used by bootcode */ -#elif defined(CONFIG_SYS_USE_NOR) -#ifdef CONFIG_NOR_UART_BOOT -#define CONFIG_SKIP_LOWLEVEL_INIT /* U-Boot is loaded by a bootloader */ -#else -#undef CONFIG_SKIP_LOWLEVEL_INIT -#endif -#define CONFIG_ENV_IS_IN_FLASH -#undef CONFIG_SYS_NO_FLASH -#define CONFIG_FLASH_CFI_DRIVER -#define CONFIG_SYS_FLASH_CFI -#define CONFIG_SYS_MAX_FLASH_BANKS 1 /* max number of flash banks */ -#define CONFIG_SYS_FLASH_SECT_SZ 0x20000 /* 128KB sect size AMD Flash */ -#define CONFIG_ENV_OFFSET (CONFIG_SYS_FLASH_SECT_SZ*2) -#define CONFIG_ENV_SIZE CONFIG_SYS_FLASH_SECT_SZ -#define PHYS_FLASH_1 0x02000000 /* CS2 Base address */ -#define CONFIG_SYS_FLASH_BASE PHYS_FLASH_1 /* Flash Base for U-Boot */ -#define PHYS_FLASH_SIZE 0x2000000 /* Flash size 32MB */ -#define CONFIG_SYS_MAX_FLASH_SECT (PHYS_FLASH_SIZE/CONFIG_SYS_FLASH_SECT_SZ) -#define CONFIG_ENV_SECT_SIZE CONFIG_SYS_FLASH_SECT_SZ /* Env sector Size */ -#endif -/*==============================*/ -/* U-Boot general configuration */ -/*==============================*/ -#define CONFIG_MISC_INIT_R -#undef CONFIG_BOOTDELAY -#define CONFIG_BOOTFILE "uImage" /* Boot file name */ -#define CONFIG_SYS_CBSIZE 1024 /* Console I/O Buffer Size */ -#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16) /* Print buffer sz */ -#define CONFIG_SYS_MAXARGS 16 /* max number of command args */ -#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE /* Boot Argument Buffer Size */ -#define CONFIG_SYS_LOAD_ADDR 0x80700000 /* default Linux kernel load address */ -#define CONFIG_VERSION_VARIABLE -#define CONFIG_AUTO_COMPLETE /* Won't work with hush so far, may be later */ -#define CONFIG_SYS_HUSH_PARSER -#define CONFIG_CMDLINE_EDITING -#define CONFIG_SYS_LONGHELP -#define CONFIG_CRC32_VERIFY -#define CONFIG_MX_CYCLIC -/*===================*/ -/* Linux Information */ -/*===================*/ -#define LINUX_BOOT_PARAM_ADDR 0x80000100 -#define CONFIG_CMDLINE_TAG -#define CONFIG_SETUP_MEMORY_TAGS -#define CONFIG_BOOTARGS "mem=56M console=ttyS0,115200n8 root=/dev/hda1 rw noinitrd ip=dhcp" -#define CONFIG_BOOTCOMMAND "setenv setboot setenv bootargs \$(bootargs) video=dm64xxfb:output=\$(videostd);run setboot; bootm 0x2060000" -/*=================*/ -/* U-Boot commands */ -/*=================*/ -#define CONFIG_CMD_ASKENV -#define CONFIG_CMD_DHCP -#define CONFIG_CMD_DIAG -#define CONFIG_CMD_I2C -#define CONFIG_CMD_MII -#define CONFIG_CMD_PING -#define CONFIG_CMD_SAVES -#define CONFIG_CMD_EEPROM -#ifdef CONFIG_SYS_USE_NAND -#define CONFIG_CMD_NAND -#elif defined(CONFIG_SYS_USE_NOR) -#define CONFIG_CMD_JFFS2 -#else -#error "Either CONFIG_SYS_USE_NAND or CONFIG_SYS_USE_NOR _MUST_ be defined !!!" -#endif - -#ifdef CONFIG_CMD_BDI -#define CONFIG_CLOCKS -#endif - -#define CONFIG_MAX_RAM_BANK_SIZE (256 << 20) /* 256 MB */ - -#define CONFIG_SYS_SDRAM_BASE PHYS_SDRAM_1 -#define CONFIG_SYS_INIT_RAM_SIZE 0x1000 -#define CONFIG_SYS_INIT_SP_ADDR (CONFIG_SYS_SDRAM_BASE + \ - CONFIG_SYS_INIT_RAM_SIZE - \ - GENERATED_GBL_DATA_SIZE) - -#endif /* __CONFIG_H */ diff --git a/include/configs/ea20.h b/include/configs/ea20.h deleted file mode 100644 index 9a70aae..0000000 --- a/include/configs/ea20.h +++ /dev/null @@ -1,308 +0,0 @@ -/* - * Copyright (C) 2010 Texas Instruments Incorporated - http://www.ti.com/ - * - * Based on davinci_dvevm.h. Original Copyrights follow: - * - * Copyright (C) 2007 Sergey Kubushyn ksi@koi8.net - * - * SPDX-License-Identifier: GPL-2.0+ - */ - -#ifndef __CONFIG_H -#define __CONFIG_H - -/* - * Board - */ -#define CONFIG_DRIVER_TI_EMAC -#define CONFIG_USE_SPIFLASH -#define CONFIG_SYS_USE_NAND -#define CONFIG_DRIVER_TI_EMAC_USE_RMII -#define CONFIG_DRIVER_TI_EMAC_RMII_NO_NEGOTIATE -#define CONFIG_BOARD_EARLY_INIT_F -#define CONFIG_BOARD_LATE_INIT -#define CONFIG_VIDEO -#define CONFIG_PREBOOT - -/* - * SoC Configuration - */ -#define CONFIG_MACH_DAVINCI_DA850_EVM -#define CONFIG_SOC_DA8XX /* TI DA8xx SoC */ -#define CONFIG_SOC_DA850 /* TI DA850 SoC */ -#define CONFIG_SYS_CLK_FREQ clk_get(DAVINCI_ARM_CLKID) -#define CONFIG_SYS_OSCIN_FREQ 24000000 -#define CONFIG_SYS_TIMERBASE DAVINCI_TIMER0_BASE -#define CONFIG_SYS_HZ_CLOCK clk_get(DAVINCI_AUXCLK_CLKID) -#define CONFIG_SKIP_LOWLEVEL_INIT -#define CONFIG_SYS_TEXT_BASE 0xc1080000 -#define CONFIG_DA8XX_GPIO - -/* - * Memory Info - */ -#define CONFIG_SYS_MALLOC_LEN (0x10000 + 4*1024*1024) /* malloc() len */ -#define PHYS_SDRAM_1 DAVINCI_DDR_EMIF_DATA_BASE /* DDR Start */ -#define PHYS_SDRAM_1_SIZE (64 << 20) /* SDRAM size 64MB */ -#define CONFIG_MAX_RAM_BANK_SIZE (512 << 20) /* max size from SPRS586*/ - -/* memtest start addr */ -#define CONFIG_SYS_MEMTEST_START (PHYS_SDRAM_1 + 0x2000000) - -/* memtest will be run on 16MB */ -#define CONFIG_SYS_MEMTEST_END (PHYS_SDRAM_1 + 0x2000000 + 16*1024*1024) - -#define CONFIG_NR_DRAM_BANKS 1 /* we have 1 bank of DRAM */ - -/* - * Serial Driver info - */ -#define CONFIG_SYS_NS16550 -#define CONFIG_SYS_NS16550_SERIAL -#define CONFIG_SYS_NS16550_REG_SIZE -4 /* NS16550 register size */ -#define CONFIG_SYS_NS16550_COM1 DAVINCI_UART0_BASE /* Base address of UART0 */ -#define CONFIG_SYS_NS16550_CLK clk_get(DAVINCI_UART2_CLKID) -#define CONFIG_CONS_INDEX 1 /* use UART0 for console */ -#define CONFIG_BAUDRATE 115200 /* Default baud rate */ - -#define CONFIG_SPI -#define CONFIG_SPI_FLASH_STMICRO -#define CONFIG_DAVINCI_SPI -#define CONFIG_SYS_SPI_BASE DAVINCI_SPI1_BASE -#define CONFIG_SYS_SPI_CLK clk_get(DAVINCI_SPI1_CLKID) -#define CONFIG_SF_DEFAULT_SPEED 30000000 -#define CONFIG_ENV_SPI_MAX_HZ CONFIG_SF_DEFAULT_SPEED - -/* - * I2C Configuration - */ -#define CONFIG_SYS_I2C -#define CONFIG_SYS_I2C_DAVINCI -#define CONFIG_SYS_DAVINCI_I2C_SPEED 100000 -#define CONFIG_SYS_DAVINCI_I2C_SLAVE 10 /* Bogus, master-only in U-Boot */ - -/* - * Network & Ethernet Configuration - */ -#ifdef CONFIG_DRIVER_TI_EMAC -#define CONFIG_EMAC_MDIO_PHY_NUM 0 -#define CONFIG_MII -#define CONFIG_BOOTP_DNS -#define CONFIG_BOOTP_DNS2 -#define CONFIG_BOOTP_SEND_HOSTNAME -#define CONFIG_NET_RETRY_COUNT 10 -#endif - -#ifdef CONFIG_USE_SPIFLASH -#undef CONFIG_ENV_IS_IN_FLASH -#undef CONFIG_ENV_IS_IN_NAND -#define CONFIG_ENV_IS_IN_SPI_FLASH -#define CONFIG_ENV_SIZE (8 << 10) -#define CONFIG_ENV_OFFSET 0x80000 -#define CONFIG_ENV_SECT_SIZE (64 << 10) -#define CONFIG_SYS_NO_FLASH -#endif - - -#if defined(CONFIG_VIDEO) -#define CONFIG_VIDEO_DA8XX -#define CONFIG_CFB_CONSOLE -#define CONFIG_VGA_AS_SINGLE_DEVICE -#define CONFIG_SPLASH_SCREEN_ALIGN -#define CONFIG_VIDEO_LOGO -#define CONFIG_SYS_CONSOLE_INFO_QUIET -#define CONFIG_VIDEO_BMP_RLE8 -#define CONFIG_VIDEO_BMP_LOGO -#define CONFIG_CMD_BMP -#define CONFIG_SYS_CONSOLE_IS_IN_ENV -#define CONFIG_SYS_CONSOLE_OVERWRITE_ROUTINE -#endif - -/* - * U-Boot general configuration - */ -#define CONFIG_BOOTFILE "uImage" /* Boot file name */ -#define CONFIG_SYS_CBSIZE 1024 /* Console I/O Buffer Size */ -#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16) -#define CONFIG_SYS_MAXARGS 16 /* max number of command args */ -#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE /* Boot Args Buffer Size */ -#define CONFIG_SYS_LOAD_ADDR (PHYS_SDRAM_1 + 0x700000) -#define CONFIG_VERSION_VARIABLE -#define CONFIG_AUTO_COMPLETE -#define CONFIG_SYS_HUSH_PARSER -#define CONFIG_CMDLINE_EDITING -#define CONFIG_SYS_LONGHELP -#define CONFIG_CRC32_VERIFY -#define CONFIG_MX_CYCLIC - -/* - * Linux Information - */ -#define LINUX_BOOT_PARAM_ADDR (PHYS_SDRAM_1 + 0x100) -#define CONFIG_CMDLINE_TAG -#define CONFIG_SETUP_MEMORY_TAGS -#define CONFIG_BOOTDELAY 3 - -/* - * U-Boot commands - */ -#define CONFIG_CMD_ENV -#define CONFIG_CMD_ASKENV -#define CONFIG_CMD_DHCP -#define CONFIG_CMD_DIAG -#define CONFIG_CMD_MII -#define CONFIG_CMD_PING -#define CONFIG_CMD_SAVES -#define CONFIG_CMD_I2C -#define CONFIG_CMD_GPIO - -#ifdef CONFIG_CMD_BDI -#define CONFIG_CLOCKS -#endif - -#ifndef CONFIG_DRIVER_TI_EMAC -#undef CONFIG_CMD_DHCP -#undef CONFIG_CMD_MII -#undef CONFIG_CMD_PING -#endif - -/* NAND Setup */ -#ifdef CONFIG_SYS_USE_NAND -#define CONFIG_CMD_NAND - -#define CONFIG_CMD_MTDPARTS -#define CONFIG_MTD_DEVICE -#define CONFIG_MTD_PARTITIONS -#define CONFIG_LZO -#define CONFIG_RBTREE -#define CONFIG_CMD_UBI -#define CONFIG_CMD_UBIFS - -#define CONFIG_NAND_DAVINCI -#define CONFIG_SYS_NAND_PAGE_2K -#define CONFIG_SYS_NAND_NO_SUBPAGE -#define CONFIG_SYS_NAND_CS 2 -#define CONFIG_SYS_NAND_BASE DAVINCI_ASYNC_EMIF_DATA_CE2_BASE -#undef CONFIG_SYS_NAND_HW_ECC -#define CONFIG_SYS_NAND_4BIT_HW_ECC_OOBFIRST -#define CONFIG_SYS_NAND_USE_FLASH_BBT -#define CONFIG_SYS_MAX_NAND_DEVICE 1 /* Max number of NAND devices */ -#endif - -/* SPI Flash */ -#ifdef CONFIG_USE_SPIFLASH -#define CONFIG_CMD_SPI -#define CONFIG_CMD_SF -#endif - -#if !defined(CONFIG_SYS_USE_NAND) && \ - !defined(CONFIG_USE_NOR) && \ - !defined(CONFIG_USE_SPIFLASH) -#define CONFIG_ENV_IS_NOWHERE -#define CONFIG_SYS_NO_FLASH -#define CONFIG_ENV_SIZE (16 << 10) -#undef CONFIG_CMD_ENV -#endif - -/* additions for new relocation code, must added to all boards */ -#define CONFIG_SYS_SDRAM_BASE 0xc0000000 -#define CONFIG_SYS_INIT_SP_ADDR (CONFIG_SYS_SDRAM_BASE + 0x1000 - \ - GENERATED_GBL_DATA_SIZE) -/* - * Default environment and default scripts - * to update uboot and load kernel - */ - -#define CONFIG_HOSTNAME ea20 -#define CONFIG_EXTRA_ENV_SETTINGS \ - "as=3\0" \ - "netdev=eth0\0" \ - "nfsargs=setenv bootargs root=/dev/nfs rw " \ - "nfsroot=${serverip}:${rootpath}\0" \ - "rfsbargs=setenv bootargs root=/dev/nfs rw " \ - "nfsroot=${serverip}:${rfsbpath}\0" \ - "testrfsargs=setenv bootargs root=/dev/nfs rw " \ - "nfsroot=${serverip}:${testrfspath}\0" \ - "ramargs=setenv bootargs root=/dev/ram rw initrd=" \ - "0x${ramdisk_addr_r},4M\0" \ - "mtdids=nand0=davinci_nand.0\0" \ - "serverip=192.168.5.249\0" \ - "ipaddr=192.168.5.248\0" \ - "rootpath=/opt/eldk/arm\0" \ - "splashpos=230,180\0" \ - "testrfspath=/opt/eldk/test_arm\0" \ - "nandargs=setenv bootargs rootfstype=ubifs ro chk_data_crc " \ - "ubi.mtd=${as} root=ubi0:rootfs\0" \ - "nandrwargs=setenv bootargs rootfstype=ubifs rw chk_data_crc " \ - "ubi.mtd=${as} root=ubi0:rootfs\0" \ - "addip_sta=setenv bootargs ${bootargs} " \ - "ip=${ipaddr}:${serverip}:${gatewayip}:${netmask}" \ - ":${hostname}:${netdev}:off panic=1\0" \ - "addip_dyn=setenv bootargs ${bootargs} ip=dhcp\0" \ - "addip=if test -n ${ipdyn};then run addip_dyn;" \ - "else run addip_sta;fi\0" \ - "addmtd=setenv bootargs ${bootargs} ${mtdparts}\0" \ - "addtty=setenv bootargs ${bootargs}" \ - " console=${consoledev},${baudrate}n8\0" \ - "addmisc=setenv bootargs ${bootargs} ${misc}\0" \ - "addmem=setenv bootargs ${bootargs} mem=${memory}\0" \ - "consoledev=ttyS0\0" \ - "loadaddr=c0000014\0" \ - "memory=32M\0" \ - "kernel_addr_r=c0700000\0" \ - "hostname=" __stringify(CONFIG_HOSTNAME) "\0" \ - "bootfile=" __stringify(CONFIG_HOSTNAME) "/uImage\0" \ - "ramdisk_file=" __stringify(CONFIG_HOSTNAME) "/image.ext2\0" \ - "flash_self=run ramargs addip addtty addmtd addmisc addmem;" \ - "bootm ${kernel_addr_r}\0" \ - "flash_nfs=run nfsargs addip addtty addmtd addmisc addmem;" \ - "bootm ${kernel_addr}\0" \ - "net_nfs=tftp ${kernel_addr_r} ${bootfile}; " \ - "run nfsargs addip addtty addmtd addmisc addmem;" \ - "bootm ${kernel_addr_r}\0" \ - "net_rfsb=tftp ${kernel_addr_r} ${bootfile}; " \ - "run rfsbargs addip addtty addmtd addmisc addmem; " \ - "bootm ${kernel_addr_r}\0" \ - "net_testrfs=tftp ${kernel_addr_r} ${bootfile}; " \ - "run testrfsargs addip addtty addmtd addmisc addmem; " \ - "bootm ${kernel_addr_r}\0" \ - "net_self_load=tftp ${kernel_addr_r} ${bootfile};" \ - "tftp ${ramdisk_addr_r} ${ramdisk_file};\0" \ - "nand_nand=ubi part nand0,${as};ubifsmount ubi:rootfs;" \ - "ubifsload ${kernel_addr_r} /boot/uImage;" \ - "ubifsumount; run nandargs addip addtty " \ - "addmtd addmisc addmem;clrlogo;" \ - "bootm ${kernel_addr_r}\0" \ - "nand_nandrw=ubi part nand0,${as};ubifsmount ubi:rootfs;" \ - "ubifsload ${kernel_addr_r} /boot/uImage;" \ - "ubifsumount; run nandrwargs addip addtty " \ - "addmtd addmisc addmem;clrlogo;" \ - "bootm ${kernel_addr_r}\0" \ - "net_nandrw=tftp ${kernel_addr_r} ${bootfile}; run nandrwargs" \ - " addip addtty addmtd addmisc addmem;" \ - "clrlogo;bootm ${kernel_addr_r}\0" \ - "u-boot=" __stringify(CONFIG_HOSTNAME) "/u-boot.bin\0" \ - "load_magic=if sf probe 0;then sf " \ - "read c0000000 0x10000 0x60000;fi\0" \ - "load_nand=ubi part nand0,${as};ubifsmount ubi:rootfs;" \ - "if ubifsload c0000014 /boot/u-boot.bin;" \ - "then mw c0000008 ${filesize};else echo Error reading" \ - " u-boot from nand!;fi\0" \ - "load_net=if sf probe 0;then sf read c0000000 0x10000 " \ - "0x60000;tftp c0000014 ${u-boot};" \ - "mw c0000008 ${filesize};fi\0" \ - "upd=if sf probe 0;then sf erase 10000 60000;" \ - "sf write c0000000 10000 60000;fi\0" \ - "ublupdate=if tftp C0700000 ${ublname};then sf probe 0; " \ - "sf erase 0 10000;" \ - "sf write 0xc0700000 0 ${filesize};fi\0" \ - "ubootupd_net=if run load_net;then echo Updating u-boot;" \ - "if run upd; then echo U-Boot updated;" \ - "else echo Error updating u-boot !;" \ - "echo Board without bootloader !!;" \ - "fi;" \ - "else echo U-Boot not downloaded..exiting;fi\0" \ - "ubootupd_nand=echo run load_magic,run load_nand,run upd;\0" \ - "bootcmd=run net_testrfs\0" - -#endif /* __CONFIG_H */