Add device tree bindings and actual device trees for SM8150 SoC and SA8155P-ADP board. Those files were imported from Linux kernel 6.8-rc5 as is. In this configuration they will not work with U-Boot for couple reasons:
- memory@ node is incomplete, as Linux expects that bootloader at the previous stage would populate the node with the actual memory configuration
- pinctrl node uses multi-tile register mapping which is not supported by the U-Boot driver
Next patches will address this issues. We are importing the existing files as is in this separate patch to ease up tracking changes from Linux.
Signed-off-by: Volodymyr Babchuk volodymyr_babchuk@epam.com ---
arch/arm/dts/pmm8155au_1.dtsi | 135 + arch/arm/dts/pmm8155au_2.dtsi | 108 + arch/arm/dts/sa8155p-adp.dts | 606 ++ arch/arm/dts/sa8155p.dtsi | 40 + arch/arm/dts/sm8150.dtsi | 5293 +++++++++++++++++ .../dt-bindings/clock/qcom,dispcc-sm8150.h | 76 + include/dt-bindings/clock/qcom,gcc-sm8150.h | 252 + include/dt-bindings/clock/qcom,gpucc-sm8150.h | 33 + include/dt-bindings/clock/qcom,rpmh.h | 37 + include/dt-bindings/dma/qcom-gpi.h | 11 + include/dt-bindings/firmware/qcom,scm.h | 39 + include/dt-bindings/iio/qcom,spmi-vadc.h | 303 + .../dt-bindings/interconnect/qcom,osm-l3.h | 15 + .../dt-bindings/interconnect/qcom,sm8150.h | 159 + include/dt-bindings/phy/phy-qcom-qmp.h | 20 + include/dt-bindings/power/qcom-rpmpd.h | 412 ++ .../regulator/qcom,rpmh-regulator.h | 36 + include/dt-bindings/soc/qcom,rpmh-rsc.h | 14 + 18 files changed, 7589 insertions(+) create mode 100644 arch/arm/dts/pmm8155au_1.dtsi create mode 100644 arch/arm/dts/pmm8155au_2.dtsi create mode 100644 arch/arm/dts/sa8155p-adp.dts create mode 100644 arch/arm/dts/sa8155p.dtsi create mode 100644 arch/arm/dts/sm8150.dtsi create mode 100644 include/dt-bindings/clock/qcom,dispcc-sm8150.h create mode 100644 include/dt-bindings/clock/qcom,gcc-sm8150.h create mode 100644 include/dt-bindings/clock/qcom,gpucc-sm8150.h create mode 100644 include/dt-bindings/clock/qcom,rpmh.h create mode 100644 include/dt-bindings/dma/qcom-gpi.h create mode 100644 include/dt-bindings/firmware/qcom,scm.h create mode 100644 include/dt-bindings/iio/qcom,spmi-vadc.h create mode 100644 include/dt-bindings/interconnect/qcom,osm-l3.h create mode 100644 include/dt-bindings/interconnect/qcom,sm8150.h create mode 100644 include/dt-bindings/phy/phy-qcom-qmp.h create mode 100644 include/dt-bindings/power/qcom-rpmpd.h create mode 100644 include/dt-bindings/regulator/qcom,rpmh-regulator.h create mode 100644 include/dt-bindings/soc/qcom,rpmh-rsc.h
diff --git a/arch/arm/dts/pmm8155au_1.dtsi b/arch/arm/dts/pmm8155au_1.dtsi new file mode 100644 index 0000000000..7072e5a2e7 --- /dev/null +++ b/arch/arm/dts/pmm8155au_1.dtsi @@ -0,0 +1,135 @@ +// SPDX-License-Identifier: BSD-3-Clause +/* + * Copyright (c) 2021, Linaro Limited + */ + +#include <dt-bindings/input/input.h> +#include <dt-bindings/interrupt-controller/irq.h> +#include <dt-bindings/spmi/spmi.h> +#include <dt-bindings/iio/qcom,spmi-vadc.h> + +/ { + thermal-zones { + pmm8155au-1-thermal { + polling-delay-passive = <100>; + polling-delay = <0>; + + thermal-sensors = <&pmm8155au_1_temp>; + + trips { + trip0 { + temperature = <95000>; + hysteresis = <0>; + type = "passive"; + }; + + trip1 { + temperature = <115000>; + hysteresis = <0>; + type = "hot"; + }; + + trip2 { + temperature = <145000>; + hysteresis = <0>; + type = "critical"; + }; + }; + }; + }; +}; + +&spmi_bus { + pmic@0 { + compatible = "qcom,pmm8155au", "qcom,spmi-pmic"; + reg = <0x0 SPMI_USID>; + #address-cells = <1>; + #size-cells = <0>; + + pon: power-on@800 { + compatible = "qcom,pm8916-pon"; + reg = <0x0800>; + pwrkey { + compatible = "qcom,pm8941-pwrkey"; + interrupts = <0x0 0x8 0x0 IRQ_TYPE_EDGE_BOTH>; + debounce = <15625>; + bias-pull-up; + linux,code = <KEY_POWER>; + + status = "disabled"; + }; + }; + + pmm8155au_1_temp: temp-alarm@2400 { + compatible = "qcom,spmi-temp-alarm"; + reg = <0x2400>; + interrupts = <0x0 0x24 0x0 IRQ_TYPE_EDGE_BOTH>; + io-channels = <&pmm8155au_1_adc ADC5_DIE_TEMP>; + io-channel-names = "thermal"; + #thermal-sensor-cells = <0>; + }; + + pmm8155au_1_adc: adc@3100 { + compatible = "qcom,spmi-adc5"; + reg = <0x3100>; + #address-cells = <1>; + #size-cells = <0>; + #io-channel-cells = <1>; + interrupts = <0x0 0x31 0x0 IRQ_TYPE_EDGE_RISING>; + + ref-gnd@0 { + reg = <ADC5_REF_GND>; + qcom,pre-scaling = <1 1>; + label = "ref_gnd"; + }; + + vref-1p25@1 { + reg = <ADC5_1P25VREF>; + qcom,pre-scaling = <1 1>; + label = "vref_1p25"; + }; + + die-temp@6 { + reg = <ADC5_DIE_TEMP>; + qcom,pre-scaling = <1 1>; + label = "die_temp"; + }; + }; + + pmm8155au_1_adc_tm: adc-tm@3500 { + compatible = "qcom,spmi-adc-tm5"; + reg = <0x3500>; + interrupts = <0x0 0x35 0x0 IRQ_TYPE_EDGE_RISING>; + #thermal-sensor-cells = <1>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + pmm8155au_1_rtc: rtc@6000 { + compatible = "qcom,pm8941-rtc"; + reg = <0x6000>; + reg-names = "rtc", "alarm"; + interrupts = <0x0 0x61 0x1 IRQ_TYPE_NONE>; + + status = "disabled"; + }; + + pmm8155au_1_gpios: gpio@c000 { + compatible = "qcom,pmm8155au-gpio"; + reg = <0xc000>; + gpio-controller; + #gpio-cells = <2>; + gpio-ranges = <&pmm8155au_1_gpios 0 0 10>; + interrupt-controller; + #interrupt-cells = <2>; + }; + }; + + pmic@1 { + compatible = "qcom,pmm8155au", "qcom,spmi-pmic"; + reg = <0x1 SPMI_USID>; + #address-cells = <1>; + #size-cells = <0>; + }; +}; diff --git a/arch/arm/dts/pmm8155au_2.dtsi b/arch/arm/dts/pmm8155au_2.dtsi new file mode 100644 index 0000000000..72075964fb --- /dev/null +++ b/arch/arm/dts/pmm8155au_2.dtsi @@ -0,0 +1,108 @@ +// SPDX-License-Identifier: BSD-3-Clause +/* + * Copyright (c) 2021, Linaro Limited + */ + +#include <dt-bindings/input/input.h> +#include <dt-bindings/interrupt-controller/irq.h> +#include <dt-bindings/spmi/spmi.h> + +/ { + thermal-zones { + pmm8155au-2-thermal { + polling-delay-passive = <100>; + polling-delay = <0>; + + thermal-sensors = <&pmm8155au_2_temp>; + + trips { + trip0 { + temperature = <95000>; + hysteresis = <0>; + type = "passive"; + }; + + trip1 { + temperature = <115000>; + hysteresis = <0>; + type = "hot"; + }; + + trip2 { + temperature = <145000>; + hysteresis = <0>; + type = "critical"; + }; + }; + }; + }; +}; + +&spmi_bus { + pmic@4 { + compatible = "qcom,pmm8155au", "qcom,spmi-pmic"; + reg = <0x4 SPMI_USID>; + #address-cells = <1>; + #size-cells = <0>; + + power-on@800 { + compatible = "qcom,pm8916-pon"; + reg = <0x0800>; + + status = "disabled"; + }; + + pmm8155au_2_temp: temp-alarm@2400 { + compatible = "qcom,spmi-temp-alarm"; + reg = <0x2400>; + interrupts = <0x4 0x24 0x0 IRQ_TYPE_EDGE_BOTH>; + io-channels = <&pmm8155au_2_adc ADC5_DIE_TEMP>; + io-channel-names = "thermal"; + #thermal-sensor-cells = <0>; + }; + + pmm8155au_2_adc: adc@3100 { + compatible = "qcom,spmi-adc5"; + reg = <0x3100>; + #address-cells = <1>; + #size-cells = <0>; + #io-channel-cells = <1>; + interrupts = <0x4 0x31 0x0 IRQ_TYPE_EDGE_RISING>; + + ref-gnd@0 { + reg = <ADC5_REF_GND>; + qcom,pre-scaling = <1 1>; + label = "ref_gnd"; + }; + + vref-1p25@1 { + reg = <ADC5_1P25VREF>; + qcom,pre-scaling = <1 1>; + label = "vref_1p25"; + }; + + die-temp@6 { + reg = <ADC5_DIE_TEMP>; + qcom,pre-scaling = <1 1>; + label = "die_temp"; + }; + }; + + pmm8155au_2_gpios: gpio@c000 { + compatible = "qcom,pmm8155au-gpio"; + reg = <0xc000>; + gpio-controller; + #gpio-cells = <2>; + gpio-ranges = <&pmm8155au_2_gpios 0 0 10>; + interrupt-controller; + #interrupt-cells = <2>; + }; + }; + + pmic@5 { + compatible = "qcom,pmm8155au", "qcom,spmi-pmic"; + reg = <0x5 SPMI_USID>; + #address-cells = <1>; + #size-cells = <0>; + }; +}; diff --git a/arch/arm/dts/sa8155p-adp.dts b/arch/arm/dts/sa8155p-adp.dts new file mode 100644 index 0000000000..5e4287f8c8 --- /dev/null +++ b/arch/arm/dts/sa8155p-adp.dts @@ -0,0 +1,606 @@ +// SPDX-License-Identifier: BSD-3-Clause +/* + * Copyright (c) 2021, Linaro Limited + */ + +/dts-v1/; + +#include <dt-bindings/regulator/qcom,rpmh-regulator.h> +#include <dt-bindings/gpio/gpio.h> +#include "sa8155p.dtsi" +#include "pmm8155au_1.dtsi" +#include "pmm8155au_2.dtsi" + +/ { + model = "Qualcomm Technologies, Inc. SA8155P ADP"; + compatible = "qcom,sa8155p-adp", "qcom,sa8155p"; + + aliases { + serial0 = &uart2; + serial1 = &uart9; + }; + + chosen { + stdout-path = "serial0:115200n8"; + }; + + vreg_3p3: vreg-3p3-regulator { + compatible = "regulator-fixed"; + regulator-name = "vreg_3p3"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + }; + + /* + * S4A is always on and not controllable through RPMh. + * So model it as a fixed regulator. + */ + vreg_s4a_1p8: smps4 { + compatible = "regulator-fixed"; + regulator-name = "vreg_s4a_1p8"; + + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + + regulator-always-on; + regulator-boot-on; + + vin-supply = <&vreg_3p3>; + }; +}; + +&apps_rsc { + regulators-0 { + compatible = "qcom,pmm8155au-rpmh-regulators"; + qcom,pmic-id = "a"; + + vdd-s1-supply = <&vreg_3p3>; + vdd-s2-supply = <&vreg_3p3>; + vdd-s3-supply = <&vreg_3p3>; + vdd-s4-supply = <&vreg_3p3>; + vdd-s5-supply = <&vreg_3p3>; + vdd-s6-supply = <&vreg_3p3>; + vdd-s7-supply = <&vreg_3p3>; + vdd-s8-supply = <&vreg_3p3>; + vdd-s9-supply = <&vreg_3p3>; + vdd-s10-supply = <&vreg_3p3>; + + vdd-l1-l8-l11-supply = <&vreg_s6a_0p92>; + vdd-l2-l10-supply = <&vreg_3p3>; + vdd-l3-l4-l5-l18-supply = <&vreg_s6a_0p92>; + vdd-l6-l9-supply = <&vreg_s6a_0p92>; + vdd-l7-l12-l14-l15-supply = <&vreg_s5a_2p04>; + vdd-l13-l16-l17-supply = <&vreg_3p3>; + + vreg_s5a_2p04: smps5 { + regulator-name = "vreg_s5a_2p04"; + regulator-min-microvolt = <1904000>; + regulator-max-microvolt = <2000000>; + }; + + vreg_s6a_0p92: smps6 { + regulator-name = "vreg_s6a_0p92"; + regulator-min-microvolt = <920000>; + regulator-max-microvolt = <1128000>; + }; + + vreg_l1a_0p752: ldo1 { + regulator-name = "vreg_l1a_0p752"; + regulator-min-microvolt = <752000>; + regulator-max-microvolt = <752000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vdda_usb_hs_3p1: + vreg_l2a_3p072: ldo2 { + regulator-name = "vreg_l2a_3p072"; + regulator-min-microvolt = <3072000>; + regulator-max-microvolt = <3072000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l3a_0p8: ldo3 { + regulator-name = "vreg_l3a_0p8"; + regulator-min-microvolt = <800000>; + regulator-max-microvolt = <800000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vdd_usb_hs_core: + vdda_usb_ss_dp_core_1: + vreg_l5a_0p88: ldo5 { + regulator-name = "vreg_l5a_0p88"; + regulator-min-microvolt = <880000>; + regulator-max-microvolt = <880000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + regulator-allow-set-load; + regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM + RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l7a_1p8: ldo7 { + regulator-name = "vreg_l7a_1p8"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l10a_2p96: ldo10 { + regulator-name = "vreg_l10a_2p96"; + regulator-min-microvolt = <2504000>; + regulator-max-microvolt = <2960000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + regulator-allow-set-load; + regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM + RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l11a_0p8: ldo11 { + regulator-name = "vreg_l11a_0p8"; + regulator-min-microvolt = <800000>; + regulator-max-microvolt = <800000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vdda_usb_hs_1p8: + vreg_l12a_1p8: ldo12 { + regulator-name = "vreg_l12a_1p8"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l13a_2p7: ldo13 { + regulator-name = "vreg_l13a_2p7"; + regulator-min-microvolt = <2704000>; + regulator-max-microvolt = <2704000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l15a_1p7: ldo15 { + regulator-name = "vreg_l15a_1p7"; + regulator-min-microvolt = <1704000>; + regulator-max-microvolt = <1704000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l16a_2p7: ldo16 { + regulator-name = "vreg_l16a_2p7"; + regulator-min-microvolt = <2704000>; + regulator-max-microvolt = <2960000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l17a_2p96: ldo17 { + regulator-name = "vreg_l17a_2p96"; + regulator-min-microvolt = <2504000>; + regulator-max-microvolt = <2960000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + }; + + regulators-1 { + compatible = "qcom,pmm8155au-rpmh-regulators"; + qcom,pmic-id = "c"; + + vdd-s1-supply = <&vreg_3p3>; + vdd-s2-supply = <&vreg_3p3>; + vdd-s3-supply = <&vreg_3p3>; + vdd-s4-supply = <&vreg_3p3>; + vdd-s5-supply = <&vreg_3p3>; + vdd-s6-supply = <&vreg_3p3>; + vdd-s7-supply = <&vreg_3p3>; + vdd-s8-supply = <&vreg_3p3>; + vdd-s9-supply = <&vreg_3p3>; + vdd-s10-supply = <&vreg_3p3>; + + vdd-l1-l8-l11-supply = <&vreg_s4c_1p352>; + vdd-l2-l10-supply = <&vreg_3p3>; + vdd-l3-l4-l5-l18-supply = <&vreg_s4c_1p352>; + vdd-l6-l9-supply = <&vreg_s6c_1p128>; + vdd-l7-l12-l14-l15-supply = <&vreg_s5c_2p04>; + vdd-l13-l16-l17-supply = <&vreg_3p3>; + + vreg_s4c_1p352: smps4 { + regulator-name = "vreg_s4c_1p352"; + regulator-min-microvolt = <1352000>; + regulator-max-microvolt = <1352000>; + }; + + vreg_s5c_2p04: smps5 { + regulator-name = "vreg_s5c_2p04"; + regulator-min-microvolt = <1904000>; + regulator-max-microvolt = <2000000>; + }; + + vreg_s6c_1p128: smps6 { + regulator-name = "vreg_s6c_1p128"; + regulator-min-microvolt = <1128000>; + regulator-max-microvolt = <1128000>; + }; + + vreg_l1c_1p304: ldo1 { + regulator-name = "vreg_l1c_1p304"; + regulator-min-microvolt = <1304000>; + regulator-max-microvolt = <1304000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l2c_1p808: ldo2 { + regulator-name = "vreg_l2c_1p808"; + regulator-min-microvolt = <1704000>; + regulator-max-microvolt = <2928000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l5c_1p2: ldo5 { + regulator-name = "vreg_l5c_1p2"; + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + regulator-allow-set-load; + regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM + RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l7c_1p8: ldo7 { + regulator-name = "vreg_l7c_1p8"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l8c_1p2: ldo8 { + regulator-name = "vreg_l8c_1p2"; + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + regulator-allow-set-load; + regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM + RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l10c_3p3: ldo10 { + regulator-name = "vreg_l10c_3p3"; + regulator-min-microvolt = <3000000>; + regulator-max-microvolt = <3312000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l11c_0p8: ldo11 { + regulator-name = "vreg_l11c_0p8"; + regulator-min-microvolt = <800000>; + regulator-max-microvolt = <800000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l12c_1p808: ldo12 { + regulator-name = "vreg_l12c_1p808"; + regulator-min-microvolt = <1704000>; + regulator-max-microvolt = <2928000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l13c_2p96: ldo13 { + regulator-name = "vreg_l13c_2p96"; + regulator-min-microvolt = <2504000>; + regulator-max-microvolt = <2960000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l15c_1p9: ldo15 { + regulator-name = "vreg_l15c_1p9"; + regulator-min-microvolt = <1704000>; + regulator-max-microvolt = <2928000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l16c_3p008: ldo16 { + regulator-name = "vreg_l16c_3p008"; + regulator-min-microvolt = <3008000>; + regulator-max-microvolt = <3008000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l18c_0p88: ldo18 { + regulator-name = "vreg_l18c_0p88"; + regulator-min-microvolt = <880000>; + regulator-max-microvolt = <880000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + }; +}; + +ðernet { + status = "okay"; + + snps,reset-gpio = <&tlmm 79 GPIO_ACTIVE_LOW>; + snps,reset-active-low; + snps,reset-delays-us = <0 11000 70000>; + + snps,mtl-rx-config = <&mtl_rx_setup>; + snps,mtl-tx-config = <&mtl_tx_setup>; + + pinctrl-names = "default"; + pinctrl-0 = <ðernet_defaults>; + + phy-handle = <&rgmii_phy>; + phy-mode = "rgmii"; + max-speed = <1000>; + + mdio { + compatible = "snps,dwmac-mdio"; + #address-cells = <1>; + #size-cells = <0>; + + /* Micrel KSZ9031RNZ PHY */ + rgmii_phy: phy@7 { + compatible = "ethernet-phy-ieee802.3-c22"; + reg = <0x7>; + + interrupts-extended = <&tlmm 124 IRQ_TYPE_EDGE_FALLING>; + device_type = "ethernet-phy"; + }; + }; + + mtl_rx_setup: rx-queues-config { + snps,rx-queues-to-use = <1>; + snps,rx-sched-sp; + + queue0 { + snps,dcb-algorithm; + snps,map-to-dma-channel = <0x0>; + snps,route-up; + snps,priority = <0x1>; + }; + }; + + mtl_tx_setup: tx-queues-config { + snps,tx-queues-to-use = <1>; + snps,tx-sched-wrr; + + queue0 { + snps,weight = <0x10>; + snps,dcb-algorithm; + snps,priority = <0x0>; + }; + }; +}; + +&qupv3_id_1 { + status = "okay"; +}; + +&remoteproc_adsp { + status = "okay"; + firmware-name = "qcom/sa8155p/adsp.mdt"; +}; + +&remoteproc_cdsp { + status = "okay"; + firmware-name = "qcom/sa8155p/cdsp.mdt"; +}; + +&sdhc_2 { + status = "okay"; + + cd-gpios = <&tlmm 4 GPIO_ACTIVE_LOW>; + pinctrl-names = "default", "sleep"; + pinctrl-0 = <&sdc2_on>; + pinctrl-1 = <&sdc2_off>; + vqmmc-supply = <&vreg_l13c_2p96>; /* IO line power */ + vmmc-supply = <&vreg_l17a_2p96>; /* Card power line */ + bus-width = <4>; + no-sdio; + no-mmc; +}; + +&uart2 { + status = "okay"; +}; + +&uart9 { + status = "okay"; +}; + +&ufs_mem_hc { + status = "okay"; + + reset-gpios = <&tlmm 175 GPIO_ACTIVE_LOW>; + + vcc-supply = <&vreg_l10a_2p96>; + vcc-max-microamp = <750000>; + vccq-supply = <&vreg_l5c_1p2>; + vccq-max-microamp = <700000>; + vccq2-supply = <&vreg_s4a_1p8>; + vccq2-max-microamp = <750000>; +}; + +&ufs_mem_phy { + status = "okay"; + + vdda-phy-supply = <&vreg_l8c_1p2>; + vdda-pll-supply = <&vreg_l5a_0p88>; +}; + +&usb_1 { + status = "okay"; +}; + +&usb_1_dwc3 { + dr_mode = "host"; + + pinctrl-names = "default"; + pinctrl-0 = <&usb2phy_ac_en1_default>; +}; + +&usb_1_hsphy { + status = "okay"; + vdda-pll-supply = <&vdd_usb_hs_core>; + vdda33-supply = <&vdda_usb_hs_3p1>; + vdda18-supply = <&vdda_usb_hs_1p8>; +}; + +&usb_1_qmpphy { + status = "disabled"; +}; + +&usb_2 { + status = "okay"; +}; + +&usb_2_dwc3 { + dr_mode = "host"; + + pinctrl-names = "default"; + pinctrl-0 = <&usb2phy_ac_en2_default>; +}; + +&usb_2_hsphy { + status = "okay"; + vdda-pll-supply = <&vdd_usb_hs_core>; + vdda33-supply = <&vdda_usb_hs_3p1>; + vdda18-supply = <&vdda_usb_hs_1p8>; +}; + +&usb_2_qmpphy { + status = "okay"; + vdda-phy-supply = <&vreg_l8c_1p2>; + vdda-pll-supply = <&vdda_usb_ss_dp_core_1>; +}; + +&pcie0 { + status = "okay"; +}; + +&pcie0_phy { + status = "okay"; + vdda-phy-supply = <&vreg_l18c_0p88>; + vdda-pll-supply = <&vreg_l8c_1p2>; +}; + +&pcie1_phy { + vdda-phy-supply = <&vreg_l18c_0p88>; + vdda-pll-supply = <&vreg_l8c_1p2>; +}; + +&tlmm { + gpio-reserved-ranges = <0 4>; + + sdc2_on: sdc2-on-state { + clk-pins { + pins = "sdc2_clk"; + bias-disable; /* No pull */ + drive-strength = <16>; /* 16 MA */ + }; + + cmd-pins { + pins = "sdc2_cmd"; + bias-pull-up; /* pull up */ + drive-strength = <16>; /* 16 MA */ + }; + + data-pins { + pins = "sdc2_data"; + bias-pull-up; /* pull up */ + drive-strength = <16>; /* 16 MA */ + }; + + sd-cd-pins { + pins = "gpio96"; + function = "gpio"; + bias-pull-up; /* pull up */ + drive-strength = <2>; /* 2 MA */ + }; + }; + + sdc2_off: sdc2-off-state { + clk-pins { + pins = "sdc2_clk"; + bias-disable; /* No pull */ + drive-strength = <2>; /* 2 MA */ + }; + + cmd-pins { + pins = "sdc2_cmd"; + bias-pull-up; /* pull up */ + drive-strength = <2>; /* 2 MA */ + }; + + data-pins { + pins = "sdc2_data"; + bias-pull-up; /* pull up */ + drive-strength = <2>; /* 2 MA */ + }; + + sd-cd-pins { + pins = "gpio96"; + function = "gpio"; + bias-pull-up; /* pull up */ + drive-strength = <2>; /* 2 MA */ + }; + }; + + usb2phy_ac_en1_default: usb2phy-ac-en1-default-state { + pins = "gpio113"; + function = "usb2phy_ac"; + bias-disable; + drive-strength = <2>; + }; + + usb2phy_ac_en2_default: usb2phy-ac-en2-default-state { + pins = "gpio123"; + function = "usb2phy_ac"; + bias-disable; + drive-strength = <2>; + }; + + ethernet_defaults: ethernet-defaults-state { + mdc-pins { + pins = "gpio7"; + function = "rgmii"; + bias-pull-up; + }; + + mdio-pins { + pins = "gpio59"; + function = "rgmii"; + bias-pull-up; + }; + + rgmii-rx-pins { + pins = "gpio117", "gpio118", "gpio119", "gpio120", "gpio115", "gpio116"; + function = "rgmii"; + bias-disable; + drive-strength = <2>; + }; + + rgmii-tx-pins { + pins = "gpio122", "gpio4", "gpio5", "gpio6", "gpio114", "gpio121"; + function = "rgmii"; + bias-pull-up; + drive-strength = <16>; + }; + + phy-intr-pins { + pins = "gpio124"; + function = "emac_phy"; + bias-disable; + drive-strength = <8>; + }; + + pps-pins { + pins = "gpio81"; + function = "emac_pps"; + bias-disable; + drive-strength = <8>; + }; + + phy-reset-pins { + pins = "gpio79"; + function = "gpio"; + bias-pull-up; + drive-strength = <16>; + }; + }; +}; diff --git a/arch/arm/dts/sa8155p.dtsi b/arch/arm/dts/sa8155p.dtsi new file mode 100644 index 0000000000..ffb7ab6952 --- /dev/null +++ b/arch/arm/dts/sa8155p.dtsi @@ -0,0 +1,40 @@ +// SPDX-License-Identifier: BSD-3-Clause +/* + * Copyright (c) 2023, Linaro Limited + * + * SA8155P is an automotive variant of SM8150, with some minor changes. + * Most notably, the RPMhPD setup differs: MMCX and LCX/LMX rails are gone, + * though the cmd-db doesn't reflect that and access attemps result in a bite. + */ + +#include "sm8150.dtsi" + +&dispcc { + power-domains = <&rpmhpd SA8155P_CX>; +}; + +&mdss_dsi0 { + power-domains = <&rpmhpd SA8155P_CX>; +}; + +&mdss_dsi1 { + power-domains = <&rpmhpd SA8155P_CX>; +}; + +&mdss_mdp { + power-domains = <&rpmhpd SA8155P_CX>; +}; + +&remoteproc_slpi { + power-domains = <&rpmhpd SA8155P_CX>, + <&rpmhpd SA8155P_MX>; +}; + +&rpmhpd { + /* + * The bindings were crafted such that SA8155P PDs match their + * SM8150 counterparts to make it more maintainable and only + * necessitate adjusting entries that actually differ + */ + compatible = "qcom,sa8155p-rpmhpd"; +}; diff --git a/arch/arm/dts/sm8150.dtsi b/arch/arm/dts/sm8150.dtsi new file mode 100644 index 0000000000..761a6757dc --- /dev/null +++ b/arch/arm/dts/sm8150.dtsi @@ -0,0 +1,5293 @@ +// SPDX-License-Identifier: BSD-3-Clause +/* + * Copyright (c) 2017-2019, The Linux Foundation. All rights reserved. + * Copyright (c) 2019, Linaro Limited + */ + +#include <dt-bindings/dma/qcom-gpi.h> +#include <dt-bindings/firmware/qcom,scm.h> +#include <dt-bindings/interrupt-controller/arm-gic.h> +#include <dt-bindings/phy/phy-qcom-qmp.h> +#include <dt-bindings/power/qcom-rpmpd.h> +#include <dt-bindings/soc/qcom,rpmh-rsc.h> +#include <dt-bindings/clock/qcom,rpmh.h> +#include <dt-bindings/clock/qcom,dispcc-sm8150.h> +#include <dt-bindings/clock/qcom,gcc-sm8150.h> +#include <dt-bindings/clock/qcom,gpucc-sm8150.h> +#include <dt-bindings/interconnect/qcom,osm-l3.h> +#include <dt-bindings/interconnect/qcom,sm8150.h> +#include <dt-bindings/thermal/thermal.h> + +/ { + interrupt-parent = <&intc>; + + #address-cells = <2>; + #size-cells = <2>; + + chosen { }; + + clocks { + xo_board: xo-board { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <38400000>; + clock-output-names = "xo_board"; + }; + + sleep_clk: sleep-clk { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <32764>; + clock-output-names = "sleep_clk"; + }; + }; + + cpus { + #address-cells = <2>; + #size-cells = <0>; + + CPU0: cpu@0 { + device_type = "cpu"; + compatible = "qcom,kryo485"; + reg = <0x0 0x0>; + clocks = <&cpufreq_hw 0>; + enable-method = "psci"; + capacity-dmips-mhz = <488>; + dynamic-power-coefficient = <232>; + next-level-cache = <&L2_0>; + qcom,freq-domain = <&cpufreq_hw 0>; + operating-points-v2 = <&cpu0_opp_table>; + interconnects = <&gem_noc MASTER_AMPSS_M0 0 &mc_virt SLAVE_EBI_CH0 0>, + <&osm_l3 MASTER_OSM_L3_APPS &osm_l3 SLAVE_OSM_L3>; + power-domains = <&CPU_PD0>; + power-domain-names = "psci"; + #cooling-cells = <2>; + L2_0: l2-cache { + compatible = "cache"; + cache-level = <2>; + cache-unified; + next-level-cache = <&L3_0>; + L3_0: l3-cache { + compatible = "cache"; + cache-level = <3>; + cache-unified; + }; + }; + }; + + CPU1: cpu@100 { + device_type = "cpu"; + compatible = "qcom,kryo485"; + reg = <0x0 0x100>; + clocks = <&cpufreq_hw 0>; + enable-method = "psci"; + capacity-dmips-mhz = <488>; + dynamic-power-coefficient = <232>; + next-level-cache = <&L2_100>; + qcom,freq-domain = <&cpufreq_hw 0>; + operating-points-v2 = <&cpu0_opp_table>; + interconnects = <&gem_noc MASTER_AMPSS_M0 0 &mc_virt SLAVE_EBI_CH0 0>, + <&osm_l3 MASTER_OSM_L3_APPS &osm_l3 SLAVE_OSM_L3>; + power-domains = <&CPU_PD1>; + power-domain-names = "psci"; + #cooling-cells = <2>; + L2_100: l2-cache { + compatible = "cache"; + cache-level = <2>; + cache-unified; + next-level-cache = <&L3_0>; + }; + }; + + CPU2: cpu@200 { + device_type = "cpu"; + compatible = "qcom,kryo485"; + reg = <0x0 0x200>; + clocks = <&cpufreq_hw 0>; + enable-method = "psci"; + capacity-dmips-mhz = <488>; + dynamic-power-coefficient = <232>; + next-level-cache = <&L2_200>; + qcom,freq-domain = <&cpufreq_hw 0>; + operating-points-v2 = <&cpu0_opp_table>; + interconnects = <&gem_noc MASTER_AMPSS_M0 0 &mc_virt SLAVE_EBI_CH0 0>, + <&osm_l3 MASTER_OSM_L3_APPS &osm_l3 SLAVE_OSM_L3>; + power-domains = <&CPU_PD2>; + power-domain-names = "psci"; + #cooling-cells = <2>; + L2_200: l2-cache { + compatible = "cache"; + cache-level = <2>; + cache-unified; + next-level-cache = <&L3_0>; + }; + }; + + CPU3: cpu@300 { + device_type = "cpu"; + compatible = "qcom,kryo485"; + reg = <0x0 0x300>; + clocks = <&cpufreq_hw 0>; + enable-method = "psci"; + capacity-dmips-mhz = <488>; + dynamic-power-coefficient = <232>; + next-level-cache = <&L2_300>; + qcom,freq-domain = <&cpufreq_hw 0>; + operating-points-v2 = <&cpu0_opp_table>; + interconnects = <&gem_noc MASTER_AMPSS_M0 0 &mc_virt SLAVE_EBI_CH0 0>, + <&osm_l3 MASTER_OSM_L3_APPS &osm_l3 SLAVE_OSM_L3>; + power-domains = <&CPU_PD3>; + power-domain-names = "psci"; + #cooling-cells = <2>; + L2_300: l2-cache { + compatible = "cache"; + cache-level = <2>; + cache-unified; + next-level-cache = <&L3_0>; + }; + }; + + CPU4: cpu@400 { + device_type = "cpu"; + compatible = "qcom,kryo485"; + reg = <0x0 0x400>; + clocks = <&cpufreq_hw 1>; + enable-method = "psci"; + capacity-dmips-mhz = <1024>; + dynamic-power-coefficient = <369>; + next-level-cache = <&L2_400>; + qcom,freq-domain = <&cpufreq_hw 1>; + operating-points-v2 = <&cpu4_opp_table>; + interconnects = <&gem_noc MASTER_AMPSS_M0 0 &mc_virt SLAVE_EBI_CH0 0>, + <&osm_l3 MASTER_OSM_L3_APPS &osm_l3 SLAVE_OSM_L3>; + power-domains = <&CPU_PD4>; + power-domain-names = "psci"; + #cooling-cells = <2>; + L2_400: l2-cache { + compatible = "cache"; + cache-level = <2>; + cache-unified; + next-level-cache = <&L3_0>; + }; + }; + + CPU5: cpu@500 { + device_type = "cpu"; + compatible = "qcom,kryo485"; + reg = <0x0 0x500>; + clocks = <&cpufreq_hw 1>; + enable-method = "psci"; + capacity-dmips-mhz = <1024>; + dynamic-power-coefficient = <369>; + next-level-cache = <&L2_500>; + qcom,freq-domain = <&cpufreq_hw 1>; + operating-points-v2 = <&cpu4_opp_table>; + interconnects = <&gem_noc MASTER_AMPSS_M0 0 &mc_virt SLAVE_EBI_CH0 0>, + <&osm_l3 MASTER_OSM_L3_APPS &osm_l3 SLAVE_OSM_L3>; + power-domains = <&CPU_PD5>; + power-domain-names = "psci"; + #cooling-cells = <2>; + L2_500: l2-cache { + compatible = "cache"; + cache-level = <2>; + cache-unified; + next-level-cache = <&L3_0>; + }; + }; + + CPU6: cpu@600 { + device_type = "cpu"; + compatible = "qcom,kryo485"; + reg = <0x0 0x600>; + clocks = <&cpufreq_hw 1>; + enable-method = "psci"; + capacity-dmips-mhz = <1024>; + dynamic-power-coefficient = <369>; + next-level-cache = <&L2_600>; + qcom,freq-domain = <&cpufreq_hw 1>; + operating-points-v2 = <&cpu4_opp_table>; + interconnects = <&gem_noc MASTER_AMPSS_M0 0 &mc_virt SLAVE_EBI_CH0 0>, + <&osm_l3 MASTER_OSM_L3_APPS &osm_l3 SLAVE_OSM_L3>; + power-domains = <&CPU_PD6>; + power-domain-names = "psci"; + #cooling-cells = <2>; + L2_600: l2-cache { + compatible = "cache"; + cache-level = <2>; + cache-unified; + next-level-cache = <&L3_0>; + }; + }; + + CPU7: cpu@700 { + device_type = "cpu"; + compatible = "qcom,kryo485"; + reg = <0x0 0x700>; + clocks = <&cpufreq_hw 2>; + enable-method = "psci"; + capacity-dmips-mhz = <1024>; + dynamic-power-coefficient = <421>; + next-level-cache = <&L2_700>; + qcom,freq-domain = <&cpufreq_hw 2>; + operating-points-v2 = <&cpu7_opp_table>; + interconnects = <&gem_noc MASTER_AMPSS_M0 0 &mc_virt SLAVE_EBI_CH0 0>, + <&osm_l3 MASTER_OSM_L3_APPS &osm_l3 SLAVE_OSM_L3>; + power-domains = <&CPU_PD7>; + power-domain-names = "psci"; + #cooling-cells = <2>; + L2_700: l2-cache { + compatible = "cache"; + cache-level = <2>; + cache-unified; + next-level-cache = <&L3_0>; + }; + }; + + cpu-map { + cluster0 { + core0 { + cpu = <&CPU0>; + }; + + core1 { + cpu = <&CPU1>; + }; + + core2 { + cpu = <&CPU2>; + }; + + core3 { + cpu = <&CPU3>; + }; + + core4 { + cpu = <&CPU4>; + }; + + core5 { + cpu = <&CPU5>; + }; + + core6 { + cpu = <&CPU6>; + }; + + core7 { + cpu = <&CPU7>; + }; + }; + }; + + idle-states { + entry-method = "psci"; + + LITTLE_CPU_SLEEP_0: cpu-sleep-0-0 { + compatible = "arm,idle-state"; + idle-state-name = "little-rail-power-collapse"; + arm,psci-suspend-param = <0x40000004>; + entry-latency-us = <355>; + exit-latency-us = <909>; + min-residency-us = <3934>; + local-timer-stop; + }; + + BIG_CPU_SLEEP_0: cpu-sleep-1-0 { + compatible = "arm,idle-state"; + idle-state-name = "big-rail-power-collapse"; + arm,psci-suspend-param = <0x40000004>; + entry-latency-us = <241>; + exit-latency-us = <1461>; + min-residency-us = <4488>; + local-timer-stop; + }; + }; + + domain-idle-states { + CLUSTER_SLEEP_0: cluster-sleep-0 { + compatible = "domain-idle-state"; + arm,psci-suspend-param = <0x4100c244>; + entry-latency-us = <3263>; + exit-latency-us = <6562>; + min-residency-us = <9987>; + }; + }; + }; + + cpu0_opp_table: opp-table-cpu0 { + compatible = "operating-points-v2"; + opp-shared; + + cpu0_opp1: opp-300000000 { + opp-hz = /bits/ 64 <300000000>; + opp-peak-kBps = <800000 9600000>; + }; + + cpu0_opp2: opp-403200000 { + opp-hz = /bits/ 64 <403200000>; + opp-peak-kBps = <800000 9600000>; + }; + + cpu0_opp3: opp-499200000 { + opp-hz = /bits/ 64 <499200000>; + opp-peak-kBps = <800000 12902400>; + }; + + cpu0_opp4: opp-576000000 { + opp-hz = /bits/ 64 <576000000>; + opp-peak-kBps = <800000 12902400>; + }; + + cpu0_opp5: opp-672000000 { + opp-hz = /bits/ 64 <672000000>; + opp-peak-kBps = <800000 15974400>; + }; + + cpu0_opp6: opp-768000000 { + opp-hz = /bits/ 64 <768000000>; + opp-peak-kBps = <1804000 19660800>; + }; + + cpu0_opp7: opp-844800000 { + opp-hz = /bits/ 64 <844800000>; + opp-peak-kBps = <1804000 19660800>; + }; + + cpu0_opp8: opp-940800000 { + opp-hz = /bits/ 64 <940800000>; + opp-peak-kBps = <1804000 22732800>; + }; + + cpu0_opp9: opp-1036800000 { + opp-hz = /bits/ 64 <1036800000>; + opp-peak-kBps = <1804000 22732800>; + }; + + cpu0_opp10: opp-1113600000 { + opp-hz = /bits/ 64 <1113600000>; + opp-peak-kBps = <2188000 25804800>; + }; + + cpu0_opp11: opp-1209600000 { + opp-hz = /bits/ 64 <1209600000>; + opp-peak-kBps = <2188000 31948800>; + }; + + cpu0_opp12: opp-1305600000 { + opp-hz = /bits/ 64 <1305600000>; + opp-peak-kBps = <3072000 31948800>; + }; + + cpu0_opp13: opp-1382400000 { + opp-hz = /bits/ 64 <1382400000>; + opp-peak-kBps = <3072000 31948800>; + }; + + cpu0_opp14: opp-1478400000 { + opp-hz = /bits/ 64 <1478400000>; + opp-peak-kBps = <3072000 31948800>; + }; + + cpu0_opp15: opp-1555200000 { + opp-hz = /bits/ 64 <1555200000>; + opp-peak-kBps = <3072000 40550400>; + }; + + cpu0_opp16: opp-1632000000 { + opp-hz = /bits/ 64 <1632000000>; + opp-peak-kBps = <3072000 40550400>; + }; + + cpu0_opp17: opp-1708800000 { + opp-hz = /bits/ 64 <1708800000>; + opp-peak-kBps = <3072000 43008000>; + }; + + cpu0_opp18: opp-1785600000 { + opp-hz = /bits/ 64 <1785600000>; + opp-peak-kBps = <3072000 43008000>; + }; + }; + + cpu4_opp_table: opp-table-cpu4 { + compatible = "operating-points-v2"; + opp-shared; + + cpu4_opp1: opp-710400000 { + opp-hz = /bits/ 64 <710400000>; + opp-peak-kBps = <1804000 15974400>; + }; + + cpu4_opp2: opp-825600000 { + opp-hz = /bits/ 64 <825600000>; + opp-peak-kBps = <2188000 19660800>; + }; + + cpu4_opp3: opp-940800000 { + opp-hz = /bits/ 64 <940800000>; + opp-peak-kBps = <2188000 22732800>; + }; + + cpu4_opp4: opp-1056000000 { + opp-hz = /bits/ 64 <1056000000>; + opp-peak-kBps = <3072000 25804800>; + }; + + cpu4_opp5: opp-1171200000 { + opp-hz = /bits/ 64 <1171200000>; + opp-peak-kBps = <3072000 31948800>; + }; + + cpu4_opp6: opp-1286400000 { + opp-hz = /bits/ 64 <1286400000>; + opp-peak-kBps = <4068000 31948800>; + }; + + cpu4_opp7: opp-1401600000 { + opp-hz = /bits/ 64 <1401600000>; + opp-peak-kBps = <4068000 31948800>; + }; + + cpu4_opp8: opp-1497600000 { + opp-hz = /bits/ 64 <1497600000>; + opp-peak-kBps = <4068000 40550400>; + }; + + cpu4_opp9: opp-1612800000 { + opp-hz = /bits/ 64 <1612800000>; + opp-peak-kBps = <4068000 40550400>; + }; + + cpu4_opp10: opp-1708800000 { + opp-hz = /bits/ 64 <1708800000>; + opp-peak-kBps = <4068000 43008000>; + }; + + cpu4_opp11: opp-1804800000 { + opp-hz = /bits/ 64 <1804800000>; + opp-peak-kBps = <6220000 43008000>; + }; + + cpu4_opp12: opp-1920000000 { + opp-hz = /bits/ 64 <1920000000>; + opp-peak-kBps = <6220000 49152000>; + }; + + cpu4_opp13: opp-2016000000 { + opp-hz = /bits/ 64 <2016000000>; + opp-peak-kBps = <7216000 49152000>; + }; + + cpu4_opp14: opp-2131200000 { + opp-hz = /bits/ 64 <2131200000>; + opp-peak-kBps = <8368000 49152000>; + }; + + cpu4_opp15: opp-2227200000 { + opp-hz = /bits/ 64 <2227200000>; + opp-peak-kBps = <8368000 51609600>; + }; + + cpu4_opp16: opp-2323200000 { + opp-hz = /bits/ 64 <2323200000>; + opp-peak-kBps = <8368000 51609600>; + }; + + cpu4_opp17: opp-2419200000 { + opp-hz = /bits/ 64 <2419200000>; + opp-peak-kBps = <8368000 51609600>; + }; + }; + + cpu7_opp_table: opp-table-cpu7 { + compatible = "operating-points-v2"; + opp-shared; + + cpu7_opp1: opp-825600000 { + opp-hz = /bits/ 64 <825600000>; + opp-peak-kBps = <2188000 19660800>; + }; + + cpu7_opp2: opp-940800000 { + opp-hz = /bits/ 64 <940800000>; + opp-peak-kBps = <2188000 22732800>; + }; + + cpu7_opp3: opp-1056000000 { + opp-hz = /bits/ 64 <1056000000>; + opp-peak-kBps = <3072000 25804800>; + }; + + cpu7_opp4: opp-1171200000 { + opp-hz = /bits/ 64 <1171200000>; + opp-peak-kBps = <3072000 31948800>; + }; + + cpu7_opp5: opp-1286400000 { + opp-hz = /bits/ 64 <1286400000>; + opp-peak-kBps = <4068000 31948800>; + }; + + cpu7_opp6: opp-1401600000 { + opp-hz = /bits/ 64 <1401600000>; + opp-peak-kBps = <4068000 31948800>; + }; + + cpu7_opp7: opp-1497600000 { + opp-hz = /bits/ 64 <1497600000>; + opp-peak-kBps = <4068000 40550400>; + }; + + cpu7_opp8: opp-1612800000 { + opp-hz = /bits/ 64 <1612800000>; + opp-peak-kBps = <4068000 40550400>; + }; + + cpu7_opp9: opp-1708800000 { + opp-hz = /bits/ 64 <1708800000>; + opp-peak-kBps = <4068000 43008000>; + }; + + cpu7_opp10: opp-1804800000 { + opp-hz = /bits/ 64 <1804800000>; + opp-peak-kBps = <6220000 43008000>; + }; + + cpu7_opp11: opp-1920000000 { + opp-hz = /bits/ 64 <1920000000>; + opp-peak-kBps = <6220000 49152000>; + }; + + cpu7_opp12: opp-2016000000 { + opp-hz = /bits/ 64 <2016000000>; + opp-peak-kBps = <7216000 49152000>; + }; + + cpu7_opp13: opp-2131200000 { + opp-hz = /bits/ 64 <2131200000>; + opp-peak-kBps = <8368000 49152000>; + }; + + cpu7_opp14: opp-2227200000 { + opp-hz = /bits/ 64 <2227200000>; + opp-peak-kBps = <8368000 51609600>; + }; + + cpu7_opp15: opp-2323200000 { + opp-hz = /bits/ 64 <2323200000>; + opp-peak-kBps = <8368000 51609600>; + }; + + cpu7_opp16: opp-2419200000 { + opp-hz = /bits/ 64 <2419200000>; + opp-peak-kBps = <8368000 51609600>; + }; + + cpu7_opp17: opp-2534400000 { + opp-hz = /bits/ 64 <2534400000>; + opp-peak-kBps = <8368000 51609600>; + }; + + cpu7_opp18: opp-2649600000 { + opp-hz = /bits/ 64 <2649600000>; + opp-peak-kBps = <8368000 51609600>; + }; + + cpu7_opp19: opp-2745600000 { + opp-hz = /bits/ 64 <2745600000>; + opp-peak-kBps = <8368000 51609600>; + }; + + cpu7_opp20: opp-2841600000 { + opp-hz = /bits/ 64 <2841600000>; + opp-peak-kBps = <8368000 51609600>; + }; + }; + + firmware { + scm: scm { + compatible = "qcom,scm-sm8150", "qcom,scm"; + #reset-cells = <1>; + }; + }; + + memory@80000000 { + device_type = "memory"; + /* We expect the bootloader to fill in the size */ + reg = <0x0 0x80000000 0x0 0x0>; + }; + + pmu { + compatible = "arm,armv8-pmuv3"; + interrupts = <GIC_PPI 5 IRQ_TYPE_LEVEL_HIGH>; + }; + + psci { + compatible = "arm,psci-1.0"; + method = "smc"; + + CPU_PD0: power-domain-cpu0 { + #power-domain-cells = <0>; + power-domains = <&CLUSTER_PD>; + domain-idle-states = <&LITTLE_CPU_SLEEP_0>; + }; + + CPU_PD1: power-domain-cpu1 { + #power-domain-cells = <0>; + power-domains = <&CLUSTER_PD>; + domain-idle-states = <&LITTLE_CPU_SLEEP_0>; + }; + + CPU_PD2: power-domain-cpu2 { + #power-domain-cells = <0>; + power-domains = <&CLUSTER_PD>; + domain-idle-states = <&LITTLE_CPU_SLEEP_0>; + }; + + CPU_PD3: power-domain-cpu3 { + #power-domain-cells = <0>; + power-domains = <&CLUSTER_PD>; + domain-idle-states = <&LITTLE_CPU_SLEEP_0>; + }; + + CPU_PD4: power-domain-cpu4 { + #power-domain-cells = <0>; + power-domains = <&CLUSTER_PD>; + domain-idle-states = <&BIG_CPU_SLEEP_0>; + }; + + CPU_PD5: power-domain-cpu5 { + #power-domain-cells = <0>; + power-domains = <&CLUSTER_PD>; + domain-idle-states = <&BIG_CPU_SLEEP_0>; + }; + + CPU_PD6: power-domain-cpu6 { + #power-domain-cells = <0>; + power-domains = <&CLUSTER_PD>; + domain-idle-states = <&BIG_CPU_SLEEP_0>; + }; + + CPU_PD7: power-domain-cpu7 { + #power-domain-cells = <0>; + power-domains = <&CLUSTER_PD>; + domain-idle-states = <&BIG_CPU_SLEEP_0>; + }; + + CLUSTER_PD: power-domain-cpu-cluster0 { + #power-domain-cells = <0>; + domain-idle-states = <&CLUSTER_SLEEP_0>; + }; + }; + + reserved-memory { + #address-cells = <2>; + #size-cells = <2>; + ranges; + + hyp_mem: memory@85700000 { + reg = <0x0 0x85700000 0x0 0x600000>; + no-map; + }; + + xbl_mem: memory@85d00000 { + reg = <0x0 0x85d00000 0x0 0x140000>; + no-map; + }; + + aop_mem: memory@85f00000 { + reg = <0x0 0x85f00000 0x0 0x20000>; + no-map; + }; + + aop_cmd_db: memory@85f20000 { + compatible = "qcom,cmd-db"; + reg = <0x0 0x85f20000 0x0 0x20000>; + no-map; + }; + + smem_mem: memory@86000000 { + reg = <0x0 0x86000000 0x0 0x200000>; + no-map; + }; + + tz_mem: memory@86200000 { + reg = <0x0 0x86200000 0x0 0x3900000>; + no-map; + }; + + rmtfs_mem: memory@89b00000 { + compatible = "qcom,rmtfs-mem"; + reg = <0x0 0x89b00000 0x0 0x200000>; + no-map; + + qcom,client-id = <1>; + qcom,vmid = <QCOM_SCM_VMID_MSS_MSA>; + }; + + camera_mem: memory@8b700000 { + reg = <0x0 0x8b700000 0x0 0x500000>; + no-map; + }; + + wlan_mem: memory@8bc00000 { + reg = <0x0 0x8bc00000 0x0 0x180000>; + no-map; + }; + + npu_mem: memory@8bd80000 { + reg = <0x0 0x8bd80000 0x0 0x80000>; + no-map; + }; + + adsp_mem: memory@8be00000 { + reg = <0x0 0x8be00000 0x0 0x1a00000>; + no-map; + }; + + mpss_mem: memory@8d800000 { + reg = <0x0 0x8d800000 0x0 0x9600000>; + no-map; + }; + + venus_mem: memory@96e00000 { + reg = <0x0 0x96e00000 0x0 0x500000>; + no-map; + }; + + slpi_mem: memory@97300000 { + reg = <0x0 0x97300000 0x0 0x1400000>; + no-map; + }; + + ipa_fw_mem: memory@98700000 { + reg = <0x0 0x98700000 0x0 0x10000>; + no-map; + }; + + ipa_gsi_mem: memory@98710000 { + reg = <0x0 0x98710000 0x0 0x5000>; + no-map; + }; + + gpu_mem: memory@98715000 { + reg = <0x0 0x98715000 0x0 0x2000>; + no-map; + }; + + spss_mem: memory@98800000 { + reg = <0x0 0x98800000 0x0 0x100000>; + no-map; + }; + + cdsp_mem: memory@98900000 { + reg = <0x0 0x98900000 0x0 0x1400000>; + no-map; + }; + + qseecom_mem: memory@9e400000 { + reg = <0x0 0x9e400000 0x0 0x1400000>; + no-map; + }; + }; + + smem { + compatible = "qcom,smem"; + memory-region = <&smem_mem>; + hwlocks = <&tcsr_mutex 3>; + }; + + smp2p-cdsp { + compatible = "qcom,smp2p"; + qcom,smem = <94>, <432>; + + interrupts = <GIC_SPI 576 IRQ_TYPE_EDGE_RISING>; + + mboxes = <&apss_shared 6>; + + qcom,local-pid = <0>; + qcom,remote-pid = <5>; + + cdsp_smp2p_out: master-kernel { + qcom,entry-name = "master-kernel"; + #qcom,smem-state-cells = <1>; + }; + + cdsp_smp2p_in: slave-kernel { + qcom,entry-name = "slave-kernel"; + + interrupt-controller; + #interrupt-cells = <2>; + }; + }; + + smp2p-lpass { + compatible = "qcom,smp2p"; + qcom,smem = <443>, <429>; + + interrupts = <GIC_SPI 158 IRQ_TYPE_EDGE_RISING>; + + mboxes = <&apss_shared 10>; + + qcom,local-pid = <0>; + qcom,remote-pid = <2>; + + adsp_smp2p_out: master-kernel { + qcom,entry-name = "master-kernel"; + #qcom,smem-state-cells = <1>; + }; + + adsp_smp2p_in: slave-kernel { + qcom,entry-name = "slave-kernel"; + + interrupt-controller; + #interrupt-cells = <2>; + }; + }; + + smp2p-mpss { + compatible = "qcom,smp2p"; + qcom,smem = <435>, <428>; + + interrupts = <GIC_SPI 451 IRQ_TYPE_EDGE_RISING>; + + mboxes = <&apss_shared 14>; + + qcom,local-pid = <0>; + qcom,remote-pid = <1>; + + modem_smp2p_out: master-kernel { + qcom,entry-name = "master-kernel"; + #qcom,smem-state-cells = <1>; + }; + + modem_smp2p_in: slave-kernel { + qcom,entry-name = "slave-kernel"; + + interrupt-controller; + #interrupt-cells = <2>; + }; + }; + + smp2p-slpi { + compatible = "qcom,smp2p"; + qcom,smem = <481>, <430>; + + interrupts = <GIC_SPI 172 IRQ_TYPE_EDGE_RISING>; + + mboxes = <&apss_shared 26>; + + qcom,local-pid = <0>; + qcom,remote-pid = <3>; + + slpi_smp2p_out: master-kernel { + qcom,entry-name = "master-kernel"; + #qcom,smem-state-cells = <1>; + }; + + slpi_smp2p_in: slave-kernel { + qcom,entry-name = "slave-kernel"; + + interrupt-controller; + #interrupt-cells = <2>; + }; + }; + + soc: soc@0 { + #address-cells = <2>; + #size-cells = <2>; + ranges = <0 0 0 0 0x10 0>; + dma-ranges = <0 0 0 0 0x10 0>; + compatible = "simple-bus"; + + gcc: clock-controller@100000 { + compatible = "qcom,gcc-sm8150"; + reg = <0x0 0x00100000 0x0 0x1f0000>; + #clock-cells = <1>; + #reset-cells = <1>; + #power-domain-cells = <1>; + clock-names = "bi_tcxo", + "sleep_clk"; + clocks = <&rpmhcc RPMH_CXO_CLK>, + <&sleep_clk>; + }; + + gpi_dma0: dma-controller@800000 { + compatible = "qcom,sm8150-gpi-dma", "qcom,sdm845-gpi-dma"; + reg = <0 0x00800000 0 0x60000>; + interrupts = <GIC_SPI 244 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 245 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 246 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 247 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 248 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 249 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 250 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 251 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 252 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 253 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 254 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 255 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 256 IRQ_TYPE_LEVEL_HIGH>; + dma-channels = <13>; + dma-channel-mask = <0xfa>; + iommus = <&apps_smmu 0x00d6 0x0>; + #dma-cells = <3>; + status = "disabled"; + }; + + ethernet: ethernet@20000 { + compatible = "qcom,sm8150-ethqos"; + reg = <0x0 0x00020000 0x0 0x10000>, + <0x0 0x00036000 0x0 0x100>; + reg-names = "stmmaceth", "rgmii"; + clock-names = "stmmaceth", "pclk", "ptp_ref", "rgmii"; + clocks = <&gcc GCC_EMAC_AXI_CLK>, + <&gcc GCC_EMAC_SLV_AHB_CLK>, + <&gcc GCC_EMAC_PTP_CLK>, + <&gcc GCC_EMAC_RGMII_CLK>; + interrupts = <GIC_SPI 689 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 699 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "macirq", "eth_lpi"; + + power-domains = <&gcc EMAC_GDSC>; + resets = <&gcc GCC_EMAC_BCR>; + + iommus = <&apps_smmu 0x3c0 0x0>; + + snps,tso; + rx-fifo-depth = <4096>; + tx-fifo-depth = <4096>; + + status = "disabled"; + }; + + qfprom: efuse@784000 { + compatible = "qcom,sm8150-qfprom", "qcom,qfprom"; + reg = <0 0x00784000 0 0x8ff>; + #address-cells = <1>; + #size-cells = <1>; + + gpu_speed_bin: gpu_speed_bin@133 { + reg = <0x133 0x1>; + bits = <5 3>; + }; + }; + + qupv3_id_0: geniqup@8c0000 { + compatible = "qcom,geni-se-qup"; + reg = <0x0 0x008c0000 0x0 0x6000>; + clock-names = "m-ahb", "s-ahb"; + clocks = <&gcc GCC_QUPV3_WRAP_0_M_AHB_CLK>, + <&gcc GCC_QUPV3_WRAP_0_S_AHB_CLK>; + iommus = <&apps_smmu 0xc3 0x0>; + #address-cells = <2>; + #size-cells = <2>; + ranges; + status = "disabled"; + + i2c0: i2c@880000 { + compatible = "qcom,geni-i2c"; + reg = <0 0x00880000 0 0x4000>; + clock-names = "se"; + clocks = <&gcc GCC_QUPV3_WRAP0_S0_CLK>; + dmas = <&gpi_dma0 0 0 QCOM_GPI_I2C>, + <&gpi_dma0 1 0 QCOM_GPI_I2C>; + dma-names = "tx", "rx"; + pinctrl-names = "default"; + pinctrl-0 = <&qup_i2c0_default>; + interrupts = <GIC_SPI 601 IRQ_TYPE_LEVEL_HIGH>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + spi0: spi@880000 { + compatible = "qcom,geni-spi"; + reg = <0 0x00880000 0 0x4000>; + reg-names = "se"; + clock-names = "se"; + clocks = <&gcc GCC_QUPV3_WRAP0_S0_CLK>; + dmas = <&gpi_dma0 0 0 QCOM_GPI_SPI>, + <&gpi_dma0 1 0 QCOM_GPI_SPI>; + dma-names = "tx", "rx"; + pinctrl-names = "default"; + pinctrl-0 = <&qup_spi0_default>; + interrupts = <GIC_SPI 601 IRQ_TYPE_LEVEL_HIGH>; + spi-max-frequency = <50000000>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + i2c1: i2c@884000 { + compatible = "qcom,geni-i2c"; + reg = <0 0x00884000 0 0x4000>; + clock-names = "se"; + clocks = <&gcc GCC_QUPV3_WRAP0_S1_CLK>; + dmas = <&gpi_dma0 0 1 QCOM_GPI_I2C>, + <&gpi_dma0 1 1 QCOM_GPI_I2C>; + dma-names = "tx", "rx"; + pinctrl-names = "default"; + pinctrl-0 = <&qup_i2c1_default>; + interrupts = <GIC_SPI 602 IRQ_TYPE_LEVEL_HIGH>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + spi1: spi@884000 { + compatible = "qcom,geni-spi"; + reg = <0 0x00884000 0 0x4000>; + reg-names = "se"; + clock-names = "se"; + clocks = <&gcc GCC_QUPV3_WRAP0_S1_CLK>; + dmas = <&gpi_dma0 0 1 QCOM_GPI_SPI>, + <&gpi_dma0 1 1 QCOM_GPI_SPI>; + dma-names = "tx", "rx"; + pinctrl-names = "default"; + pinctrl-0 = <&qup_spi1_default>; + interrupts = <GIC_SPI 602 IRQ_TYPE_LEVEL_HIGH>; + spi-max-frequency = <50000000>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + i2c2: i2c@888000 { + compatible = "qcom,geni-i2c"; + reg = <0 0x00888000 0 0x4000>; + clock-names = "se"; + clocks = <&gcc GCC_QUPV3_WRAP0_S2_CLK>; + dmas = <&gpi_dma0 0 2 QCOM_GPI_I2C>, + <&gpi_dma0 1 2 QCOM_GPI_I2C>; + dma-names = "tx", "rx"; + pinctrl-names = "default"; + pinctrl-0 = <&qup_i2c2_default>; + interrupts = <GIC_SPI 603 IRQ_TYPE_LEVEL_HIGH>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + spi2: spi@888000 { + compatible = "qcom,geni-spi"; + reg = <0 0x00888000 0 0x4000>; + reg-names = "se"; + clock-names = "se"; + clocks = <&gcc GCC_QUPV3_WRAP0_S2_CLK>; + dmas = <&gpi_dma0 0 2 QCOM_GPI_SPI>, + <&gpi_dma0 1 2 QCOM_GPI_SPI>; + dma-names = "tx", "rx"; + pinctrl-names = "default"; + pinctrl-0 = <&qup_spi2_default>; + interrupts = <GIC_SPI 603 IRQ_TYPE_LEVEL_HIGH>; + spi-max-frequency = <50000000>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + i2c3: i2c@88c000 { + compatible = "qcom,geni-i2c"; + reg = <0 0x0088c000 0 0x4000>; + clock-names = "se"; + clocks = <&gcc GCC_QUPV3_WRAP0_S3_CLK>; + dmas = <&gpi_dma0 0 3 QCOM_GPI_I2C>, + <&gpi_dma0 1 3 QCOM_GPI_I2C>; + dma-names = "tx", "rx"; + pinctrl-names = "default"; + pinctrl-0 = <&qup_i2c3_default>; + interrupts = <GIC_SPI 604 IRQ_TYPE_LEVEL_HIGH>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + spi3: spi@88c000 { + compatible = "qcom,geni-spi"; + reg = <0 0x0088c000 0 0x4000>; + reg-names = "se"; + clock-names = "se"; + clocks = <&gcc GCC_QUPV3_WRAP0_S3_CLK>; + dmas = <&gpi_dma0 0 3 QCOM_GPI_SPI>, + <&gpi_dma0 1 3 QCOM_GPI_SPI>; + dma-names = "tx", "rx"; + pinctrl-names = "default"; + pinctrl-0 = <&qup_spi3_default>; + interrupts = <GIC_SPI 604 IRQ_TYPE_LEVEL_HIGH>; + spi-max-frequency = <50000000>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + i2c4: i2c@890000 { + compatible = "qcom,geni-i2c"; + reg = <0 0x00890000 0 0x4000>; + clock-names = "se"; + clocks = <&gcc GCC_QUPV3_WRAP0_S4_CLK>; + dmas = <&gpi_dma0 0 4 QCOM_GPI_I2C>, + <&gpi_dma0 1 4 QCOM_GPI_I2C>; + dma-names = "tx", "rx"; + pinctrl-names = "default"; + pinctrl-0 = <&qup_i2c4_default>; + interrupts = <GIC_SPI 605 IRQ_TYPE_LEVEL_HIGH>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + spi4: spi@890000 { + compatible = "qcom,geni-spi"; + reg = <0 0x00890000 0 0x4000>; + reg-names = "se"; + clock-names = "se"; + clocks = <&gcc GCC_QUPV3_WRAP0_S4_CLK>; + dmas = <&gpi_dma0 0 4 QCOM_GPI_SPI>, + <&gpi_dma0 1 4 QCOM_GPI_SPI>; + dma-names = "tx", "rx"; + pinctrl-names = "default"; + pinctrl-0 = <&qup_spi4_default>; + interrupts = <GIC_SPI 605 IRQ_TYPE_LEVEL_HIGH>; + spi-max-frequency = <50000000>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + i2c5: i2c@894000 { + compatible = "qcom,geni-i2c"; + reg = <0 0x00894000 0 0x4000>; + clock-names = "se"; + clocks = <&gcc GCC_QUPV3_WRAP0_S5_CLK>; + dmas = <&gpi_dma0 0 5 QCOM_GPI_I2C>, + <&gpi_dma0 1 5 QCOM_GPI_I2C>; + dma-names = "tx", "rx"; + pinctrl-names = "default"; + pinctrl-0 = <&qup_i2c5_default>; + interrupts = <GIC_SPI 606 IRQ_TYPE_LEVEL_HIGH>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + spi5: spi@894000 { + compatible = "qcom,geni-spi"; + reg = <0 0x00894000 0 0x4000>; + reg-names = "se"; + clock-names = "se"; + clocks = <&gcc GCC_QUPV3_WRAP0_S5_CLK>; + dmas = <&gpi_dma0 0 5 QCOM_GPI_SPI>, + <&gpi_dma0 1 5 QCOM_GPI_SPI>; + dma-names = "tx", "rx"; + pinctrl-names = "default"; + pinctrl-0 = <&qup_spi5_default>; + interrupts = <GIC_SPI 606 IRQ_TYPE_LEVEL_HIGH>; + spi-max-frequency = <50000000>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + i2c6: i2c@898000 { + compatible = "qcom,geni-i2c"; + reg = <0 0x00898000 0 0x4000>; + clock-names = "se"; + clocks = <&gcc GCC_QUPV3_WRAP0_S6_CLK>; + dmas = <&gpi_dma0 0 6 QCOM_GPI_I2C>, + <&gpi_dma0 1 6 QCOM_GPI_I2C>; + dma-names = "tx", "rx"; + pinctrl-names = "default"; + pinctrl-0 = <&qup_i2c6_default>; + interrupts = <GIC_SPI 607 IRQ_TYPE_LEVEL_HIGH>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + spi6: spi@898000 { + compatible = "qcom,geni-spi"; + reg = <0 0x00898000 0 0x4000>; + reg-names = "se"; + clock-names = "se"; + clocks = <&gcc GCC_QUPV3_WRAP0_S6_CLK>; + dmas = <&gpi_dma0 0 6 QCOM_GPI_SPI>, + <&gpi_dma0 1 6 QCOM_GPI_SPI>; + dma-names = "tx", "rx"; + pinctrl-names = "default"; + pinctrl-0 = <&qup_spi6_default>; + interrupts = <GIC_SPI 607 IRQ_TYPE_LEVEL_HIGH>; + spi-max-frequency = <50000000>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + i2c7: i2c@89c000 { + compatible = "qcom,geni-i2c"; + reg = <0 0x0089c000 0 0x4000>; + clock-names = "se"; + clocks = <&gcc GCC_QUPV3_WRAP0_S7_CLK>; + dmas = <&gpi_dma0 0 7 QCOM_GPI_I2C>, + <&gpi_dma0 1 7 QCOM_GPI_I2C>; + dma-names = "tx", "rx"; + pinctrl-names = "default"; + pinctrl-0 = <&qup_i2c7_default>; + interrupts = <GIC_SPI 608 IRQ_TYPE_LEVEL_HIGH>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + spi7: spi@89c000 { + compatible = "qcom,geni-spi"; + reg = <0 0x0089c000 0 0x4000>; + reg-names = "se"; + clock-names = "se"; + clocks = <&gcc GCC_QUPV3_WRAP0_S7_CLK>; + dmas = <&gpi_dma0 0 7 QCOM_GPI_SPI>, + <&gpi_dma0 1 7 QCOM_GPI_SPI>; + dma-names = "tx", "rx"; + pinctrl-names = "default"; + pinctrl-0 = <&qup_spi7_default>; + interrupts = <GIC_SPI 608 IRQ_TYPE_LEVEL_HIGH>; + spi-max-frequency = <50000000>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + }; + + gpi_dma1: dma-controller@a00000 { + compatible = "qcom,sm8150-gpi-dma", "qcom,sdm845-gpi-dma"; + reg = <0 0x00a00000 0 0x60000>; + interrupts = <GIC_SPI 279 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 280 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 281 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 282 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 283 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 284 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 293 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 294 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 295 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 296 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 297 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 298 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 299 IRQ_TYPE_LEVEL_HIGH>; + dma-channels = <13>; + dma-channel-mask = <0xfa>; + iommus = <&apps_smmu 0x0616 0x0>; + #dma-cells = <3>; + status = "disabled"; + }; + + qupv3_id_1: geniqup@ac0000 { + compatible = "qcom,geni-se-qup"; + reg = <0x0 0x00ac0000 0x0 0x6000>; + clock-names = "m-ahb", "s-ahb"; + clocks = <&gcc GCC_QUPV3_WRAP_1_M_AHB_CLK>, + <&gcc GCC_QUPV3_WRAP_1_S_AHB_CLK>; + iommus = <&apps_smmu 0x603 0x0>; + #address-cells = <2>; + #size-cells = <2>; + ranges; + status = "disabled"; + + i2c8: i2c@a80000 { + compatible = "qcom,geni-i2c"; + reg = <0 0x00a80000 0 0x4000>; + clock-names = "se"; + clocks = <&gcc GCC_QUPV3_WRAP1_S0_CLK>; + dmas = <&gpi_dma1 0 0 QCOM_GPI_I2C>, + <&gpi_dma1 1 0 QCOM_GPI_I2C>; + dma-names = "tx", "rx"; + pinctrl-names = "default"; + pinctrl-0 = <&qup_i2c8_default>; + interrupts = <GIC_SPI 353 IRQ_TYPE_LEVEL_HIGH>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + spi8: spi@a80000 { + compatible = "qcom,geni-spi"; + reg = <0 0x00a80000 0 0x4000>; + reg-names = "se"; + clock-names = "se"; + clocks = <&gcc GCC_QUPV3_WRAP1_S0_CLK>; + dmas = <&gpi_dma1 0 0 QCOM_GPI_SPI>, + <&gpi_dma1 1 0 QCOM_GPI_SPI>; + dma-names = "tx", "rx"; + pinctrl-names = "default"; + pinctrl-0 = <&qup_spi8_default>; + interrupts = <GIC_SPI 353 IRQ_TYPE_LEVEL_HIGH>; + spi-max-frequency = <50000000>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + i2c9: i2c@a84000 { + compatible = "qcom,geni-i2c"; + reg = <0 0x00a84000 0 0x4000>; + clock-names = "se"; + clocks = <&gcc GCC_QUPV3_WRAP1_S1_CLK>; + dmas = <&gpi_dma1 0 1 QCOM_GPI_I2C>, + <&gpi_dma1 1 1 QCOM_GPI_I2C>; + dma-names = "tx", "rx"; + pinctrl-names = "default"; + pinctrl-0 = <&qup_i2c9_default>; + interrupts = <GIC_SPI 354 IRQ_TYPE_LEVEL_HIGH>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + spi9: spi@a84000 { + compatible = "qcom,geni-spi"; + reg = <0 0x00a84000 0 0x4000>; + reg-names = "se"; + clock-names = "se"; + clocks = <&gcc GCC_QUPV3_WRAP1_S1_CLK>; + dmas = <&gpi_dma1 0 1 QCOM_GPI_SPI>, + <&gpi_dma1 1 1 QCOM_GPI_SPI>; + dma-names = "tx", "rx"; + pinctrl-names = "default"; + pinctrl-0 = <&qup_spi9_default>; + interrupts = <GIC_SPI 354 IRQ_TYPE_LEVEL_HIGH>; + spi-max-frequency = <50000000>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + uart9: serial@a84000 { + compatible = "qcom,geni-uart"; + reg = <0x0 0x00a84000 0x0 0x4000>; + clocks = <&gcc GCC_QUPV3_WRAP1_S1_CLK>; + clock-names = "se"; + pinctrl-0 = <&qup_uart9_default>; + pinctrl-names = "default"; + interrupts = <GIC_SPI 354 IRQ_TYPE_LEVEL_HIGH>; + status = "disabled"; + }; + + i2c10: i2c@a88000 { + compatible = "qcom,geni-i2c"; + reg = <0 0x00a88000 0 0x4000>; + clock-names = "se"; + clocks = <&gcc GCC_QUPV3_WRAP1_S2_CLK>; + dmas = <&gpi_dma1 0 2 QCOM_GPI_I2C>, + <&gpi_dma1 1 2 QCOM_GPI_I2C>; + dma-names = "tx", "rx"; + pinctrl-names = "default"; + pinctrl-0 = <&qup_i2c10_default>; + interrupts = <GIC_SPI 355 IRQ_TYPE_LEVEL_HIGH>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + spi10: spi@a88000 { + compatible = "qcom,geni-spi"; + reg = <0 0x00a88000 0 0x4000>; + reg-names = "se"; + clock-names = "se"; + clocks = <&gcc GCC_QUPV3_WRAP1_S2_CLK>; + dmas = <&gpi_dma1 0 2 QCOM_GPI_SPI>, + <&gpi_dma1 1 2 QCOM_GPI_SPI>; + dma-names = "tx", "rx"; + pinctrl-names = "default"; + pinctrl-0 = <&qup_spi10_default>; + interrupts = <GIC_SPI 355 IRQ_TYPE_LEVEL_HIGH>; + spi-max-frequency = <50000000>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + i2c11: i2c@a8c000 { + compatible = "qcom,geni-i2c"; + reg = <0 0x00a8c000 0 0x4000>; + clock-names = "se"; + clocks = <&gcc GCC_QUPV3_WRAP1_S3_CLK>; + dmas = <&gpi_dma1 0 3 QCOM_GPI_I2C>, + <&gpi_dma1 1 3 QCOM_GPI_I2C>; + dma-names = "tx", "rx"; + pinctrl-names = "default"; + pinctrl-0 = <&qup_i2c11_default>; + interrupts = <GIC_SPI 356 IRQ_TYPE_LEVEL_HIGH>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + spi11: spi@a8c000 { + compatible = "qcom,geni-spi"; + reg = <0 0x00a8c000 0 0x4000>; + reg-names = "se"; + clock-names = "se"; + clocks = <&gcc GCC_QUPV3_WRAP1_S3_CLK>; + dmas = <&gpi_dma1 0 3 QCOM_GPI_SPI>, + <&gpi_dma1 1 3 QCOM_GPI_SPI>; + dma-names = "tx", "rx"; + pinctrl-names = "default"; + pinctrl-0 = <&qup_spi11_default>; + interrupts = <GIC_SPI 356 IRQ_TYPE_LEVEL_HIGH>; + spi-max-frequency = <50000000>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + uart2: serial@a90000 { + compatible = "qcom,geni-debug-uart"; + reg = <0x0 0x00a90000 0x0 0x4000>; + clock-names = "se"; + clocks = <&gcc GCC_QUPV3_WRAP1_S4_CLK>; + interrupts = <GIC_SPI 357 IRQ_TYPE_LEVEL_HIGH>; + status = "disabled"; + }; + + i2c12: i2c@a90000 { + compatible = "qcom,geni-i2c"; + reg = <0 0x00a90000 0 0x4000>; + clock-names = "se"; + clocks = <&gcc GCC_QUPV3_WRAP1_S4_CLK>; + dmas = <&gpi_dma1 0 4 QCOM_GPI_I2C>, + <&gpi_dma1 1 4 QCOM_GPI_I2C>; + dma-names = "tx", "rx"; + pinctrl-names = "default"; + pinctrl-0 = <&qup_i2c12_default>; + interrupts = <GIC_SPI 357 IRQ_TYPE_LEVEL_HIGH>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + spi12: spi@a90000 { + compatible = "qcom,geni-spi"; + reg = <0 0x00a90000 0 0x4000>; + reg-names = "se"; + clock-names = "se"; + clocks = <&gcc GCC_QUPV3_WRAP1_S4_CLK>; + dmas = <&gpi_dma1 0 4 QCOM_GPI_SPI>, + <&gpi_dma1 1 4 QCOM_GPI_SPI>; + dma-names = "tx", "rx"; + pinctrl-names = "default"; + pinctrl-0 = <&qup_spi12_default>; + interrupts = <GIC_SPI 357 IRQ_TYPE_LEVEL_HIGH>; + spi-max-frequency = <50000000>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + i2c16: i2c@94000 { + compatible = "qcom,geni-i2c"; + reg = <0 0x00094000 0 0x4000>; + clock-names = "se"; + clocks = <&gcc GCC_QUPV3_WRAP1_S5_CLK>; + dmas = <&gpi_dma2 0 5 QCOM_GPI_I2C>, + <&gpi_dma2 1 5 QCOM_GPI_I2C>; + dma-names = "tx", "rx"; + pinctrl-names = "default"; + pinctrl-0 = <&qup_i2c16_default>; + interrupts = <GIC_SPI 358 IRQ_TYPE_LEVEL_HIGH>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + spi16: spi@a94000 { + compatible = "qcom,geni-spi"; + reg = <0 0x00a94000 0 0x4000>; + reg-names = "se"; + clock-names = "se"; + clocks = <&gcc GCC_QUPV3_WRAP1_S5_CLK>; + dmas = <&gpi_dma2 0 5 QCOM_GPI_SPI>, + <&gpi_dma2 1 5 QCOM_GPI_SPI>; + dma-names = "tx", "rx"; + pinctrl-names = "default"; + pinctrl-0 = <&qup_spi16_default>; + interrupts = <GIC_SPI 358 IRQ_TYPE_LEVEL_HIGH>; + spi-max-frequency = <50000000>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + }; + + gpi_dma2: dma-controller@c00000 { + compatible = "qcom,sm8150-gpi-dma", "qcom,sdm845-gpi-dma"; + reg = <0 0x00c00000 0 0x60000>; + interrupts = <GIC_SPI 588 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 589 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 590 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 591 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 592 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 593 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 594 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 595 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 596 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 597 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 598 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 599 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 600 IRQ_TYPE_LEVEL_HIGH>; + dma-channels = <13>; + dma-channel-mask = <0xfa>; + iommus = <&apps_smmu 0x07b6 0x0>; + #dma-cells = <3>; + status = "disabled"; + }; + + qupv3_id_2: geniqup@cc0000 { + compatible = "qcom,geni-se-qup"; + reg = <0x0 0x00cc0000 0x0 0x6000>; + + clock-names = "m-ahb", "s-ahb"; + clocks = <&gcc GCC_QUPV3_WRAP_2_M_AHB_CLK>, + <&gcc GCC_QUPV3_WRAP_2_S_AHB_CLK>; + iommus = <&apps_smmu 0x7a3 0x0>; + #address-cells = <2>; + #size-cells = <2>; + ranges; + status = "disabled"; + + i2c17: i2c@c80000 { + compatible = "qcom,geni-i2c"; + reg = <0 0x00c80000 0 0x4000>; + clock-names = "se"; + clocks = <&gcc GCC_QUPV3_WRAP2_S0_CLK>; + dmas = <&gpi_dma2 0 0 QCOM_GPI_I2C>, + <&gpi_dma2 1 0 QCOM_GPI_I2C>; + dma-names = "tx", "rx"; + pinctrl-names = "default"; + pinctrl-0 = <&qup_i2c17_default>; + interrupts = <GIC_SPI 373 IRQ_TYPE_LEVEL_HIGH>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + spi17: spi@c80000 { + compatible = "qcom,geni-spi"; + reg = <0 0x00c80000 0 0x4000>; + reg-names = "se"; + clock-names = "se"; + clocks = <&gcc GCC_QUPV3_WRAP2_S0_CLK>; + dmas = <&gpi_dma2 0 0 QCOM_GPI_SPI>, + <&gpi_dma2 1 0 QCOM_GPI_SPI>; + dma-names = "tx", "rx"; + pinctrl-names = "default"; + pinctrl-0 = <&qup_spi17_default>; + interrupts = <GIC_SPI 373 IRQ_TYPE_LEVEL_HIGH>; + spi-max-frequency = <50000000>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + i2c18: i2c@c84000 { + compatible = "qcom,geni-i2c"; + reg = <0 0x00c84000 0 0x4000>; + clock-names = "se"; + clocks = <&gcc GCC_QUPV3_WRAP2_S1_CLK>; + dmas = <&gpi_dma2 0 1 QCOM_GPI_I2C>, + <&gpi_dma2 1 1 QCOM_GPI_I2C>; + dma-names = "tx", "rx"; + pinctrl-names = "default"; + pinctrl-0 = <&qup_i2c18_default>; + interrupts = <GIC_SPI 583 IRQ_TYPE_LEVEL_HIGH>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + spi18: spi@c84000 { + compatible = "qcom,geni-spi"; + reg = <0 0x00c84000 0 0x4000>; + reg-names = "se"; + clock-names = "se"; + clocks = <&gcc GCC_QUPV3_WRAP2_S1_CLK>; + dmas = <&gpi_dma2 0 1 QCOM_GPI_SPI>, + <&gpi_dma2 1 1 QCOM_GPI_SPI>; + dma-names = "tx", "rx"; + pinctrl-names = "default"; + pinctrl-0 = <&qup_spi18_default>; + interrupts = <GIC_SPI 583 IRQ_TYPE_LEVEL_HIGH>; + spi-max-frequency = <50000000>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + i2c19: i2c@c88000 { + compatible = "qcom,geni-i2c"; + reg = <0 0x00c88000 0 0x4000>; + clock-names = "se"; + clocks = <&gcc GCC_QUPV3_WRAP2_S2_CLK>; + dmas = <&gpi_dma2 0 2 QCOM_GPI_I2C>, + <&gpi_dma2 1 2 QCOM_GPI_I2C>; + dma-names = "tx", "rx"; + pinctrl-names = "default"; + pinctrl-0 = <&qup_i2c19_default>; + interrupts = <GIC_SPI 584 IRQ_TYPE_LEVEL_HIGH>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + spi19: spi@c88000 { + compatible = "qcom,geni-spi"; + reg = <0 0x00c88000 0 0x4000>; + reg-names = "se"; + clock-names = "se"; + clocks = <&gcc GCC_QUPV3_WRAP2_S2_CLK>; + dmas = <&gpi_dma2 0 2 QCOM_GPI_SPI>, + <&gpi_dma2 1 2 QCOM_GPI_SPI>; + dma-names = "tx", "rx"; + pinctrl-names = "default"; + pinctrl-0 = <&qup_spi19_default>; + interrupts = <GIC_SPI 584 IRQ_TYPE_LEVEL_HIGH>; + spi-max-frequency = <50000000>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + i2c13: i2c@c8c000 { + compatible = "qcom,geni-i2c"; + reg = <0 0x00c8c000 0 0x4000>; + clock-names = "se"; + clocks = <&gcc GCC_QUPV3_WRAP2_S3_CLK>; + dmas = <&gpi_dma2 0 3 QCOM_GPI_I2C>, + <&gpi_dma2 1 3 QCOM_GPI_I2C>; + dma-names = "tx", "rx"; + pinctrl-names = "default"; + pinctrl-0 = <&qup_i2c13_default>; + interrupts = <GIC_SPI 585 IRQ_TYPE_LEVEL_HIGH>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + spi13: spi@c8c000 { + compatible = "qcom,geni-spi"; + reg = <0 0x00c8c000 0 0x4000>; + reg-names = "se"; + clock-names = "se"; + clocks = <&gcc GCC_QUPV3_WRAP2_S3_CLK>; + dmas = <&gpi_dma2 0 3 QCOM_GPI_SPI>, + <&gpi_dma2 1 3 QCOM_GPI_SPI>; + dma-names = "tx", "rx"; + pinctrl-names = "default"; + pinctrl-0 = <&qup_spi13_default>; + interrupts = <GIC_SPI 585 IRQ_TYPE_LEVEL_HIGH>; + spi-max-frequency = <50000000>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + i2c14: i2c@c90000 { + compatible = "qcom,geni-i2c"; + reg = <0 0x00c90000 0 0x4000>; + clock-names = "se"; + clocks = <&gcc GCC_QUPV3_WRAP2_S4_CLK>; + dmas = <&gpi_dma2 0 4 QCOM_GPI_I2C>, + <&gpi_dma2 1 4 QCOM_GPI_I2C>; + dma-names = "tx", "rx"; + pinctrl-names = "default"; + pinctrl-0 = <&qup_i2c14_default>; + interrupts = <GIC_SPI 586 IRQ_TYPE_LEVEL_HIGH>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + spi14: spi@c90000 { + compatible = "qcom,geni-spi"; + reg = <0 0x00c90000 0 0x4000>; + reg-names = "se"; + clock-names = "se"; + clocks = <&gcc GCC_QUPV3_WRAP2_S4_CLK>; + dmas = <&gpi_dma2 0 4 QCOM_GPI_SPI>, + <&gpi_dma2 1 4 QCOM_GPI_SPI>; + dma-names = "tx", "rx"; + pinctrl-names = "default"; + pinctrl-0 = <&qup_spi14_default>; + interrupts = <GIC_SPI 586 IRQ_TYPE_LEVEL_HIGH>; + spi-max-frequency = <50000000>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + i2c15: i2c@c94000 { + compatible = "qcom,geni-i2c"; + reg = <0 0x00c94000 0 0x4000>; + clock-names = "se"; + clocks = <&gcc GCC_QUPV3_WRAP2_S5_CLK>; + dmas = <&gpi_dma2 0 5 QCOM_GPI_I2C>, + <&gpi_dma2 1 5 QCOM_GPI_I2C>; + dma-names = "tx", "rx"; + pinctrl-names = "default"; + pinctrl-0 = <&qup_i2c15_default>; + interrupts = <GIC_SPI 587 IRQ_TYPE_LEVEL_HIGH>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + spi15: spi@c94000 { + compatible = "qcom,geni-spi"; + reg = <0 0x00c94000 0 0x4000>; + reg-names = "se"; + clock-names = "se"; + clocks = <&gcc GCC_QUPV3_WRAP2_S5_CLK>; + dmas = <&gpi_dma2 0 5 QCOM_GPI_SPI>, + <&gpi_dma2 1 5 QCOM_GPI_SPI>; + dma-names = "tx", "rx"; + pinctrl-names = "default"; + pinctrl-0 = <&qup_spi15_default>; + interrupts = <GIC_SPI 587 IRQ_TYPE_LEVEL_HIGH>; + spi-max-frequency = <50000000>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + }; + + config_noc: interconnect@1500000 { + compatible = "qcom,sm8150-config-noc"; + reg = <0 0x01500000 0 0x7400>; + #interconnect-cells = <2>; + qcom,bcm-voters = <&apps_bcm_voter>; + }; + + system_noc: interconnect@1620000 { + compatible = "qcom,sm8150-system-noc"; + reg = <0 0x01620000 0 0x19400>; + #interconnect-cells = <2>; + qcom,bcm-voters = <&apps_bcm_voter>; + }; + + mc_virt: interconnect@163a000 { + compatible = "qcom,sm8150-mc-virt"; + reg = <0 0x0163a000 0 0x1000>; + #interconnect-cells = <2>; + qcom,bcm-voters = <&apps_bcm_voter>; + }; + + aggre1_noc: interconnect@16e0000 { + compatible = "qcom,sm8150-aggre1-noc"; + reg = <0 0x016e0000 0 0xd080>; + #interconnect-cells = <2>; + qcom,bcm-voters = <&apps_bcm_voter>; + }; + + aggre2_noc: interconnect@1700000 { + compatible = "qcom,sm8150-aggre2-noc"; + reg = <0 0x01700000 0 0x20000>; + #interconnect-cells = <2>; + qcom,bcm-voters = <&apps_bcm_voter>; + }; + + compute_noc: interconnect@1720000 { + compatible = "qcom,sm8150-compute-noc"; + reg = <0 0x01720000 0 0x7000>; + #interconnect-cells = <2>; + qcom,bcm-voters = <&apps_bcm_voter>; + }; + + mmss_noc: interconnect@1740000 { + compatible = "qcom,sm8150-mmss-noc"; + reg = <0 0x01740000 0 0x1c100>; + #interconnect-cells = <2>; + qcom,bcm-voters = <&apps_bcm_voter>; + }; + + system-cache-controller@9200000 { + compatible = "qcom,sm8150-llcc"; + reg = <0 0x09200000 0 0x50000>, <0 0x09280000 0 0x50000>, + <0 0x09300000 0 0x50000>, <0 0x09380000 0 0x50000>, + <0 0x09600000 0 0x50000>; + reg-names = "llcc0_base", "llcc1_base", "llcc2_base", + "llcc3_base", "llcc_broadcast_base"; + interrupts = <GIC_SPI 582 IRQ_TYPE_LEVEL_HIGH>; + }; + + dma@10a2000 { + compatible = "qcom,sm8150-dcc", "qcom,dcc"; + reg = <0x0 0x010a2000 0x0 0x1000>, + <0x0 0x010ad000 0x0 0x3000>; + }; + + pcie0: pcie@1c00000 { + compatible = "qcom,pcie-sm8150"; + reg = <0 0x01c00000 0 0x3000>, + <0 0x60000000 0 0xf1d>, + <0 0x60000f20 0 0xa8>, + <0 0x60001000 0 0x1000>, + <0 0x60100000 0 0x100000>; + reg-names = "parf", "dbi", "elbi", "atu", "config"; + device_type = "pci"; + linux,pci-domain = <0>; + bus-range = <0x00 0xff>; + num-lanes = <1>; + + #address-cells = <3>; + #size-cells = <2>; + + ranges = <0x01000000 0x0 0x00000000 0x0 0x60200000 0x0 0x100000>, + <0x02000000 0x0 0x60300000 0x0 0x60300000 0x0 0x3d00000>; + + interrupts = <GIC_SPI 141 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "msi"; + #interrupt-cells = <1>; + interrupt-map-mask = <0 0 0 0x7>; + interrupt-map = <0 0 0 1 &intc 0 149 IRQ_TYPE_LEVEL_HIGH>, /* int_a */ + <0 0 0 2 &intc 0 150 IRQ_TYPE_LEVEL_HIGH>, /* int_b */ + <0 0 0 3 &intc 0 151 IRQ_TYPE_LEVEL_HIGH>, /* int_c */ + <0 0 0 4 &intc 0 152 IRQ_TYPE_LEVEL_HIGH>; /* int_d */ + + clocks = <&gcc GCC_PCIE_0_PIPE_CLK>, + <&gcc GCC_PCIE_0_AUX_CLK>, + <&gcc GCC_PCIE_0_CFG_AHB_CLK>, + <&gcc GCC_PCIE_0_MSTR_AXI_CLK>, + <&gcc GCC_PCIE_0_SLV_AXI_CLK>, + <&gcc GCC_PCIE_0_SLV_Q2A_AXI_CLK>, + <&gcc GCC_AGGRE_NOC_PCIE_TBU_CLK>; + clock-names = "pipe", + "aux", + "cfg", + "bus_master", + "bus_slave", + "slave_q2a", + "tbu"; + + iommu-map = <0x0 &apps_smmu 0x1d80 0x1>, + <0x100 &apps_smmu 0x1d81 0x1>; + + resets = <&gcc GCC_PCIE_0_BCR>; + reset-names = "pci"; + + power-domains = <&gcc PCIE_0_GDSC>; + + phys = <&pcie0_phy>; + phy-names = "pciephy"; + + perst-gpios = <&tlmm 35 GPIO_ACTIVE_HIGH>; + enable-gpio = <&tlmm 37 GPIO_ACTIVE_HIGH>; + + pinctrl-names = "default"; + pinctrl-0 = <&pcie0_default_state>; + + status = "disabled"; + }; + + pcie0_phy: phy@1c06000 { + compatible = "qcom,sm8150-qmp-gen3x1-pcie-phy"; + reg = <0 0x01c06000 0 0x1000>; + clocks = <&gcc GCC_PCIE_PHY_AUX_CLK>, + <&gcc GCC_PCIE_0_CFG_AHB_CLK>, + <&gcc GCC_PCIE_0_CLKREF_CLK>, + <&gcc GCC_PCIE0_PHY_REFGEN_CLK>, + <&gcc GCC_PCIE_0_PIPE_CLK>; + clock-names = "aux", + "cfg_ahb", + "ref", + "refgen", + "pipe"; + + clock-output-names = "pcie_0_pipe_clk"; + #clock-cells = <0>; + + #phy-cells = <0>; + + resets = <&gcc GCC_PCIE_0_PHY_BCR>; + reset-names = "phy"; + + assigned-clocks = <&gcc GCC_PCIE0_PHY_REFGEN_CLK>; + assigned-clock-rates = <100000000>; + + status = "disabled"; + }; + + pcie1: pcie@1c08000 { + compatible = "qcom,pcie-sm8150"; + reg = <0 0x01c08000 0 0x3000>, + <0 0x40000000 0 0xf1d>, + <0 0x40000f20 0 0xa8>, + <0 0x40001000 0 0x1000>, + <0 0x40100000 0 0x100000>; + reg-names = "parf", "dbi", "elbi", "atu", "config"; + device_type = "pci"; + linux,pci-domain = <1>; + bus-range = <0x00 0xff>; + num-lanes = <2>; + + #address-cells = <3>; + #size-cells = <2>; + + ranges = <0x01000000 0x0 0x00000000 0x0 0x40200000 0x0 0x100000>, + <0x02000000 0x0 0x40300000 0x0 0x40300000 0x0 0x1fd00000>; + + interrupts = <GIC_SPI 307 IRQ_TYPE_EDGE_RISING>; + interrupt-names = "msi"; + #interrupt-cells = <1>; + interrupt-map-mask = <0 0 0 0x7>; + interrupt-map = <0 0 0 1 &intc 0 434 IRQ_TYPE_LEVEL_HIGH>, /* int_a */ + <0 0 0 2 &intc 0 435 IRQ_TYPE_LEVEL_HIGH>, /* int_b */ + <0 0 0 3 &intc 0 438 IRQ_TYPE_LEVEL_HIGH>, /* int_c */ + <0 0 0 4 &intc 0 439 IRQ_TYPE_LEVEL_HIGH>; /* int_d */ + + clocks = <&gcc GCC_PCIE_1_PIPE_CLK>, + <&gcc GCC_PCIE_1_AUX_CLK>, + <&gcc GCC_PCIE_1_CFG_AHB_CLK>, + <&gcc GCC_PCIE_1_MSTR_AXI_CLK>, + <&gcc GCC_PCIE_1_SLV_AXI_CLK>, + <&gcc GCC_PCIE_1_SLV_Q2A_AXI_CLK>, + <&gcc GCC_AGGRE_NOC_PCIE_TBU_CLK>; + clock-names = "pipe", + "aux", + "cfg", + "bus_master", + "bus_slave", + "slave_q2a", + "tbu"; + + assigned-clocks = <&gcc GCC_PCIE_1_AUX_CLK>; + assigned-clock-rates = <19200000>; + + iommu-map = <0x0 &apps_smmu 0x1e00 0x1>, + <0x100 &apps_smmu 0x1e01 0x1>; + + resets = <&gcc GCC_PCIE_1_BCR>; + reset-names = "pci"; + + power-domains = <&gcc PCIE_1_GDSC>; + + phys = <&pcie1_phy>; + phy-names = "pciephy"; + + perst-gpios = <&tlmm 102 GPIO_ACTIVE_HIGH>; + enable-gpio = <&tlmm 104 GPIO_ACTIVE_HIGH>; + + pinctrl-names = "default"; + pinctrl-0 = <&pcie1_default_state>; + + status = "disabled"; + }; + + pcie1_phy: phy@1c0e000 { + compatible = "qcom,sm8150-qmp-gen3x2-pcie-phy"; + reg = <0 0x01c0e000 0 0x1000>; + clocks = <&gcc GCC_PCIE_PHY_AUX_CLK>, + <&gcc GCC_PCIE_1_CFG_AHB_CLK>, + <&gcc GCC_PCIE_1_CLKREF_CLK>, + <&gcc GCC_PCIE1_PHY_REFGEN_CLK>, + <&gcc GCC_PCIE_1_PIPE_CLK>; + clock-names = "aux", + "cfg_ahb", + "ref", + "refgen", + "pipe"; + + clock-output-names = "pcie_1_pipe_clk"; + #clock-cells = <0>; + + #phy-cells = <0>; + + resets = <&gcc GCC_PCIE_1_PHY_BCR>; + reset-names = "phy"; + + assigned-clocks = <&gcc GCC_PCIE1_PHY_REFGEN_CLK>; + assigned-clock-rates = <100000000>; + + status = "disabled"; + }; + + ufs_mem_hc: ufshc@1d84000 { + compatible = "qcom,sm8150-ufshc", "qcom,ufshc", + "jedec,ufs-2.0"; + reg = <0 0x01d84000 0 0x2500>, + <0 0x01d90000 0 0x8000>; + reg-names = "std", "ice"; + interrupts = <GIC_SPI 265 IRQ_TYPE_LEVEL_HIGH>; + phys = <&ufs_mem_phy>; + phy-names = "ufsphy"; + lanes-per-direction = <2>; + #reset-cells = <1>; + resets = <&gcc GCC_UFS_PHY_BCR>; + reset-names = "rst"; + + iommus = <&apps_smmu 0x300 0>; + + clock-names = + "core_clk", + "bus_aggr_clk", + "iface_clk", + "core_clk_unipro", + "ref_clk", + "tx_lane0_sync_clk", + "rx_lane0_sync_clk", + "rx_lane1_sync_clk", + "ice_core_clk"; + clocks = + <&gcc GCC_UFS_PHY_AXI_CLK>, + <&gcc GCC_AGGRE_UFS_PHY_AXI_CLK>, + <&gcc GCC_UFS_PHY_AHB_CLK>, + <&gcc GCC_UFS_PHY_UNIPRO_CORE_CLK>, + <&rpmhcc RPMH_CXO_CLK>, + <&gcc GCC_UFS_PHY_TX_SYMBOL_0_CLK>, + <&gcc GCC_UFS_PHY_RX_SYMBOL_0_CLK>, + <&gcc GCC_UFS_PHY_RX_SYMBOL_1_CLK>, + <&gcc GCC_UFS_PHY_ICE_CORE_CLK>; + freq-table-hz = + <37500000 300000000>, + <0 0>, + <0 0>, + <37500000 300000000>, + <0 0>, + <0 0>, + <0 0>, + <0 0>, + <0 300000000>; + + status = "disabled"; + }; + + ufs_mem_phy: phy@1d87000 { + compatible = "qcom,sm8150-qmp-ufs-phy"; + reg = <0 0x01d87000 0 0x1000>; + + clock-names = "ref", + "ref_aux"; + clocks = <&gcc GCC_UFS_MEM_CLKREF_CLK>, + <&gcc GCC_UFS_PHY_PHY_AUX_CLK>; + + power-domains = <&gcc UFS_PHY_GDSC>; + + resets = <&ufs_mem_hc 0>; + reset-names = "ufsphy"; + + #phy-cells = <0>; + + status = "disabled"; + }; + + cryptobam: dma-controller@1dc4000 { + compatible = "qcom,bam-v1.7.4", "qcom,bam-v1.7.0"; + reg = <0 0x01dc4000 0 0x24000>; + interrupts = <GIC_SPI 272 IRQ_TYPE_LEVEL_HIGH>; + #dma-cells = <1>; + qcom,ee = <0>; + qcom,controlled-remotely; + num-channels = <8>; + qcom,num-ees = <2>; + iommus = <&apps_smmu 0x502 0x0641>, + <&apps_smmu 0x504 0x0011>, + <&apps_smmu 0x506 0x0011>, + <&apps_smmu 0x508 0x0011>, + <&apps_smmu 0x512 0x0000>; + }; + + crypto: crypto@1dfa000 { + compatible = "qcom,sm8150-qce", "qcom,qce"; + reg = <0 0x01dfa000 0 0x6000>; + dmas = <&cryptobam 4>, <&cryptobam 5>; + dma-names = "rx", "tx"; + iommus = <&apps_smmu 0x502 0x0641>, + <&apps_smmu 0x504 0x0011>, + <&apps_smmu 0x506 0x0011>, + <&apps_smmu 0x508 0x0011>, + <&apps_smmu 0x512 0x0000>; + interconnects = <&aggre2_noc MASTER_CRYPTO_CORE_0 0 &mc_virt SLAVE_EBI_CH0 0>; + interconnect-names = "memory"; + }; + + tcsr_mutex: hwlock@1f40000 { + compatible = "qcom,tcsr-mutex"; + reg = <0x0 0x01f40000 0x0 0x20000>; + #hwlock-cells = <1>; + }; + + tcsr_regs_1: syscon@1f60000 { + compatible = "qcom,sm8150-tcsr", "syscon"; + reg = <0x0 0x01f60000 0x0 0x20000>; + }; + + remoteproc_slpi: remoteproc@2400000 { + compatible = "qcom,sm8150-slpi-pas"; + reg = <0x0 0x02400000 0x0 0x4040>; + + interrupts-extended = <&intc GIC_SPI 494 IRQ_TYPE_EDGE_RISING>, + <&slpi_smp2p_in 0 IRQ_TYPE_EDGE_RISING>, + <&slpi_smp2p_in 1 IRQ_TYPE_EDGE_RISING>, + <&slpi_smp2p_in 2 IRQ_TYPE_EDGE_RISING>, + <&slpi_smp2p_in 3 IRQ_TYPE_EDGE_RISING>; + interrupt-names = "wdog", "fatal", "ready", + "handover", "stop-ack"; + + clocks = <&rpmhcc RPMH_CXO_CLK>; + clock-names = "xo"; + + power-domains = <&rpmhpd SM8150_LCX>, + <&rpmhpd SM8150_LMX>; + power-domain-names = "lcx", "lmx"; + + memory-region = <&slpi_mem>; + + qcom,qmp = <&aoss_qmp>; + + qcom,smem-states = <&slpi_smp2p_out 0>; + qcom,smem-state-names = "stop"; + + status = "disabled"; + + glink-edge { + interrupts = <GIC_SPI 170 IRQ_TYPE_EDGE_RISING>; + label = "dsps"; + qcom,remote-pid = <3>; + mboxes = <&apss_shared 24>; + + fastrpc { + compatible = "qcom,fastrpc"; + qcom,glink-channels = "fastrpcglink-apps-dsp"; + label = "sdsp"; + qcom,non-secure-domain; + #address-cells = <1>; + #size-cells = <0>; + + compute-cb@1 { + compatible = "qcom,fastrpc-compute-cb"; + reg = <1>; + iommus = <&apps_smmu 0x05a1 0x0>; + }; + + compute-cb@2 { + compatible = "qcom,fastrpc-compute-cb"; + reg = <2>; + iommus = <&apps_smmu 0x05a2 0x0>; + }; + + compute-cb@3 { + compatible = "qcom,fastrpc-compute-cb"; + reg = <3>; + iommus = <&apps_smmu 0x05a3 0x0>; + /* note: shared-cb = <4> in downstream */ + }; + }; + }; + }; + + gpu: gpu@2c00000 { + compatible = "qcom,adreno-640.1", "qcom,adreno"; + reg = <0 0x02c00000 0 0x40000>; + reg-names = "kgsl_3d0_reg_memory"; + + interrupts = <GIC_SPI 300 IRQ_TYPE_LEVEL_HIGH>; + + iommus = <&adreno_smmu 0 0x401>; + + operating-points-v2 = <&gpu_opp_table>; + + qcom,gmu = <&gmu>; + + nvmem-cells = <&gpu_speed_bin>; + nvmem-cell-names = "speed_bin"; + + status = "disabled"; + + zap-shader { + memory-region = <&gpu_mem>; + }; + + gpu_opp_table: opp-table { + compatible = "operating-points-v2"; + + opp-675000000 { + opp-hz = /bits/ 64 <675000000>; + opp-level = <RPMH_REGULATOR_LEVEL_NOM_L1>; + opp-supported-hw = <0x2>; + }; + + opp-585000000 { + opp-hz = /bits/ 64 <585000000>; + opp-level = <RPMH_REGULATOR_LEVEL_NOM>; + opp-supported-hw = <0x3>; + }; + + opp-499200000 { + opp-hz = /bits/ 64 <499200000>; + opp-level = <RPMH_REGULATOR_LEVEL_SVS_L2>; + opp-supported-hw = <0x3>; + }; + + opp-427000000 { + opp-hz = /bits/ 64 <427000000>; + opp-level = <RPMH_REGULATOR_LEVEL_SVS_L1>; + opp-supported-hw = <0x3>; + }; + + opp-345000000 { + opp-hz = /bits/ 64 <345000000>; + opp-level = <RPMH_REGULATOR_LEVEL_SVS>; + opp-supported-hw = <0x3>; + }; + + opp-257000000 { + opp-hz = /bits/ 64 <257000000>; + opp-level = <RPMH_REGULATOR_LEVEL_LOW_SVS>; + opp-supported-hw = <0x3>; + }; + }; + }; + + gmu: gmu@2c6a000 { + compatible = "qcom,adreno-gmu-640.1", "qcom,adreno-gmu"; + + reg = <0 0x02c6a000 0 0x30000>, + <0 0x0b290000 0 0x10000>, + <0 0x0b490000 0 0x10000>; + reg-names = "gmu", "gmu_pdc", "gmu_pdc_seq"; + + interrupts = <GIC_SPI 304 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 305 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "hfi", "gmu"; + + clocks = <&gpucc GPU_CC_AHB_CLK>, + <&gpucc GPU_CC_CX_GMU_CLK>, + <&gpucc GPU_CC_CXO_CLK>, + <&gcc GCC_DDRSS_GPU_AXI_CLK>, + <&gcc GCC_GPU_MEMNOC_GFX_CLK>; + clock-names = "ahb", "gmu", "cxo", "axi", "memnoc"; + + power-domains = <&gpucc GPU_CX_GDSC>, + <&gpucc GPU_GX_GDSC>; + power-domain-names = "cx", "gx"; + + iommus = <&adreno_smmu 5 0x400>; + + operating-points-v2 = <&gmu_opp_table>; + + status = "disabled"; + + gmu_opp_table: opp-table { + compatible = "operating-points-v2"; + + opp-200000000 { + opp-hz = /bits/ 64 <200000000>; + opp-level = <RPMH_REGULATOR_LEVEL_MIN_SVS>; + }; + }; + }; + + gpucc: clock-controller@2c90000 { + compatible = "qcom,sm8150-gpucc"; + reg = <0 0x02c90000 0 0x9000>; + clocks = <&rpmhcc RPMH_CXO_CLK>, + <&gcc GCC_GPU_GPLL0_CLK_SRC>, + <&gcc GCC_GPU_GPLL0_DIV_CLK_SRC>; + clock-names = "bi_tcxo", + "gcc_gpu_gpll0_clk_src", + "gcc_gpu_gpll0_div_clk_src"; + #clock-cells = <1>; + #reset-cells = <1>; + #power-domain-cells = <1>; + }; + + adreno_smmu: iommu@2ca0000 { + compatible = "qcom,sm8150-smmu-500", "qcom,adreno-smmu", + "qcom,smmu-500", "arm,mmu-500"; + reg = <0 0x02ca0000 0 0x10000>; + #iommu-cells = <2>; + #global-interrupts = <1>; + interrupts = <GIC_SPI 674 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 681 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 682 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 683 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 684 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 685 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 686 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 687 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 688 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&gpucc GPU_CC_AHB_CLK>, + <&gcc GCC_GPU_MEMNOC_GFX_CLK>, + <&gcc GCC_GPU_SNOC_DVM_GFX_CLK>; + clock-names = "ahb", "bus", "iface"; + + power-domains = <&gpucc GPU_CX_GDSC>; + }; + + tlmm: pinctrl@3100000 { + compatible = "qcom,sm8150-pinctrl"; + reg = <0x0 0x03100000 0x0 0x300000>, + <0x0 0x03500000 0x0 0x300000>, + <0x0 0x03900000 0x0 0x300000>, + <0x0 0x03D00000 0x0 0x300000>; + reg-names = "west", "east", "north", "south"; + interrupts = <GIC_SPI 208 IRQ_TYPE_LEVEL_HIGH>; + gpio-ranges = <&tlmm 0 0 176>; + gpio-controller; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + wakeup-parent = <&pdc>; + + qup_i2c0_default: qup-i2c0-default-state { + pins = "gpio0", "gpio1"; + function = "qup0"; + drive-strength = <0x02>; + bias-disable; + }; + + qup_spi0_default: qup-spi0-default-state { + pins = "gpio0", "gpio1", "gpio2", "gpio3"; + function = "qup0"; + drive-strength = <6>; + bias-disable; + }; + + qup_i2c1_default: qup-i2c1-default-state { + pins = "gpio114", "gpio115"; + function = "qup1"; + drive-strength = <2>; + bias-disable; + }; + + qup_spi1_default: qup-spi1-default-state { + pins = "gpio114", "gpio115", "gpio116", "gpio117"; + function = "qup1"; + drive-strength = <6>; + bias-disable; + }; + + qup_i2c2_default: qup-i2c2-default-state { + pins = "gpio126", "gpio127"; + function = "qup2"; + drive-strength = <2>; + bias-disable; + }; + + qup_spi2_default: qup-spi2-default-state { + pins = "gpio126", "gpio127", "gpio128", "gpio129"; + function = "qup2"; + drive-strength = <6>; + bias-disable; + }; + + qup_i2c3_default: qup-i2c3-default-state { + pins = "gpio144", "gpio145"; + function = "qup3"; + drive-strength = <2>; + bias-disable; + }; + + qup_spi3_default: qup-spi3-default-state { + pins = "gpio144", "gpio145", "gpio146", "gpio147"; + function = "qup3"; + drive-strength = <6>; + bias-disable; + }; + + qup_i2c4_default: qup-i2c4-default-state { + pins = "gpio51", "gpio52"; + function = "qup4"; + drive-strength = <2>; + bias-disable; + }; + + qup_spi4_default: qup-spi4-default-state { + pins = "gpio51", "gpio52", "gpio53", "gpio54"; + function = "qup4"; + drive-strength = <6>; + bias-disable; + }; + + qup_i2c5_default: qup-i2c5-default-state { + pins = "gpio121", "gpio122"; + function = "qup5"; + drive-strength = <2>; + bias-disable; + }; + + qup_spi5_default: qup-spi5-default-state { + pins = "gpio119", "gpio120", "gpio121", "gpio122"; + function = "qup5"; + drive-strength = <6>; + bias-disable; + }; + + qup_i2c6_default: qup-i2c6-default-state { + pins = "gpio6", "gpio7"; + function = "qup6"; + drive-strength = <2>; + bias-disable; + }; + + qup_spi6_default: qup-spi6_default-state { + pins = "gpio4", "gpio5", "gpio6", "gpio7"; + function = "qup6"; + drive-strength = <6>; + bias-disable; + }; + + qup_i2c7_default: qup-i2c7-default-state { + pins = "gpio98", "gpio99"; + function = "qup7"; + drive-strength = <2>; + bias-disable; + }; + + qup_spi7_default: qup-spi7_default-state { + pins = "gpio98", "gpio99", "gpio100", "gpio101"; + function = "qup7"; + drive-strength = <6>; + bias-disable; + }; + + qup_i2c8_default: qup-i2c8-default-state { + pins = "gpio88", "gpio89"; + function = "qup8"; + drive-strength = <2>; + bias-disable; + }; + + qup_spi8_default: qup-spi8-default-state { + pins = "gpio88", "gpio89", "gpio90", "gpio91"; + function = "qup8"; + drive-strength = <6>; + bias-disable; + }; + + qup_i2c9_default: qup-i2c9-default-state { + pins = "gpio39", "gpio40"; + function = "qup9"; + drive-strength = <2>; + bias-disable; + }; + + qup_spi9_default: qup-spi9-default-state { + pins = "gpio39", "gpio40", "gpio41", "gpio42"; + function = "qup9"; + drive-strength = <6>; + bias-disable; + }; + + qup_uart9_default: qup-uart9-default-state { + pins = "gpio41", "gpio42"; + function = "qup9"; + drive-strength = <2>; + bias-disable; + }; + + qup_i2c10_default: qup-i2c10-default-state { + pins = "gpio9", "gpio10"; + function = "qup10"; + drive-strength = <2>; + bias-disable; + }; + + qup_spi10_default: qup-spi10-default-state { + pins = "gpio9", "gpio10", "gpio11", "gpio12"; + function = "qup10"; + drive-strength = <6>; + bias-disable; + }; + + qup_i2c11_default: qup-i2c11-default-state { + pins = "gpio94", "gpio95"; + function = "qup11"; + drive-strength = <2>; + bias-disable; + }; + + qup_spi11_default: qup-spi11-default-state { + pins = "gpio92", "gpio93", "gpio94", "gpio95"; + function = "qup11"; + drive-strength = <6>; + bias-disable; + }; + + qup_i2c12_default: qup-i2c12-default-state { + pins = "gpio83", "gpio84"; + function = "qup12"; + drive-strength = <2>; + bias-disable; + }; + + qup_spi12_default: qup-spi12-default-state { + pins = "gpio83", "gpio84", "gpio85", "gpio86"; + function = "qup12"; + drive-strength = <6>; + bias-disable; + }; + + qup_i2c13_default: qup-i2c13-default-state { + pins = "gpio43", "gpio44"; + function = "qup13"; + drive-strength = <2>; + bias-disable; + }; + + qup_spi13_default: qup-spi13-default-state { + pins = "gpio43", "gpio44", "gpio45", "gpio46"; + function = "qup13"; + drive-strength = <6>; + bias-disable; + }; + + qup_i2c14_default: qup-i2c14-default-state { + pins = "gpio47", "gpio48"; + function = "qup14"; + drive-strength = <2>; + bias-disable; + }; + + qup_spi14_default: qup-spi14-default-state { + pins = "gpio47", "gpio48", "gpio49", "gpio50"; + function = "qup14"; + drive-strength = <6>; + bias-disable; + }; + + qup_i2c15_default: qup-i2c15-default-state { + pins = "gpio27", "gpio28"; + function = "qup15"; + drive-strength = <2>; + bias-disable; + }; + + qup_spi15_default: qup-spi15-default-state { + pins = "gpio27", "gpio28", "gpio29", "gpio30"; + function = "qup15"; + drive-strength = <6>; + bias-disable; + }; + + qup_i2c16_default: qup-i2c16-default-state { + pins = "gpio86", "gpio85"; + function = "qup16"; + drive-strength = <2>; + bias-disable; + }; + + qup_spi16_default: qup-spi16-default-state { + pins = "gpio83", "gpio84", "gpio85", "gpio86"; + function = "qup16"; + drive-strength = <6>; + bias-disable; + }; + + qup_i2c17_default: qup-i2c17-default-state { + pins = "gpio55", "gpio56"; + function = "qup17"; + drive-strength = <2>; + bias-disable; + }; + + qup_spi17_default: qup-spi17-default-state { + pins = "gpio55", "gpio56", "gpio57", "gpio58"; + function = "qup17"; + drive-strength = <6>; + bias-disable; + }; + + qup_i2c18_default: qup-i2c18-default-state { + pins = "gpio23", "gpio24"; + function = "qup18"; + drive-strength = <2>; + bias-disable; + }; + + qup_spi18_default: qup-spi18-default-state { + pins = "gpio23", "gpio24", "gpio25", "gpio26"; + function = "qup18"; + drive-strength = <6>; + bias-disable; + }; + + qup_i2c19_default: qup-i2c19-default-state { + pins = "gpio57", "gpio58"; + function = "qup19"; + drive-strength = <2>; + bias-disable; + }; + + qup_spi19_default: qup-spi19-default-state { + pins = "gpio55", "gpio56", "gpio57", "gpio58"; + function = "qup19"; + drive-strength = <6>; + bias-disable; + }; + + pcie0_default_state: pcie0-default-state { + perst-pins { + pins = "gpio35"; + function = "gpio"; + drive-strength = <2>; + bias-pull-down; + }; + + clkreq-pins { + pins = "gpio36"; + function = "pci_e0"; + drive-strength = <2>; + bias-pull-up; + }; + + wake-pins { + pins = "gpio37"; + function = "gpio"; + drive-strength = <2>; + bias-pull-up; + }; + }; + + pcie1_default_state: pcie1-default-state { + perst-pins { + pins = "gpio102"; + function = "gpio"; + drive-strength = <2>; + bias-pull-down; + }; + + clkreq-pins { + pins = "gpio103"; + function = "pci_e1"; + drive-strength = <2>; + bias-pull-up; + }; + + wake-pins { + pins = "gpio104"; + function = "gpio"; + drive-strength = <2>; + bias-pull-up; + }; + }; + }; + + remoteproc_mpss: remoteproc@4080000 { + compatible = "qcom,sm8150-mpss-pas"; + reg = <0x0 0x04080000 0x0 0x4040>; + + interrupts-extended = <&intc GIC_SPI 266 IRQ_TYPE_EDGE_RISING>, + <&modem_smp2p_in 0 IRQ_TYPE_EDGE_RISING>, + <&modem_smp2p_in 1 IRQ_TYPE_EDGE_RISING>, + <&modem_smp2p_in 2 IRQ_TYPE_EDGE_RISING>, + <&modem_smp2p_in 3 IRQ_TYPE_EDGE_RISING>, + <&modem_smp2p_in 7 IRQ_TYPE_EDGE_RISING>; + interrupt-names = "wdog", "fatal", "ready", "handover", + "stop-ack", "shutdown-ack"; + + clocks = <&rpmhcc RPMH_CXO_CLK>; + clock-names = "xo"; + + power-domains = <&rpmhpd SM8150_CX>, + <&rpmhpd SM8150_MSS>; + power-domain-names = "cx", "mss"; + + memory-region = <&mpss_mem>; + + qcom,qmp = <&aoss_qmp>; + + qcom,smem-states = <&modem_smp2p_out 0>; + qcom,smem-state-names = "stop"; + + status = "disabled"; + + glink-edge { + interrupts = <GIC_SPI 449 IRQ_TYPE_EDGE_RISING>; + label = "modem"; + qcom,remote-pid = <1>; + mboxes = <&apss_shared 12>; + }; + }; + + stm@6002000 { + compatible = "arm,coresight-stm", "arm,primecell"; + reg = <0 0x06002000 0 0x1000>, + <0 0x16280000 0 0x180000>; + reg-names = "stm-base", "stm-stimulus-base"; + + clocks = <&aoss_qmp>; + clock-names = "apb_pclk"; + + out-ports { + port { + stm_out: endpoint { + remote-endpoint = <&funnel0_in7>; + }; + }; + }; + }; + + funnel@6041000 { + compatible = "arm,coresight-dynamic-funnel", "arm,primecell"; + reg = <0 0x06041000 0 0x1000>; + + clocks = <&aoss_qmp>; + clock-names = "apb_pclk"; + + out-ports { + port { + funnel0_out: endpoint { + remote-endpoint = <&merge_funnel_in0>; + }; + }; + }; + + in-ports { + #address-cells = <1>; + #size-cells = <0>; + + port@7 { + reg = <7>; + funnel0_in7: endpoint { + remote-endpoint = <&stm_out>; + }; + }; + }; + }; + + funnel@6042000 { + compatible = "arm,coresight-dynamic-funnel", "arm,primecell"; + reg = <0 0x06042000 0 0x1000>; + + clocks = <&aoss_qmp>; + clock-names = "apb_pclk"; + + out-ports { + port { + funnel1_out: endpoint { + remote-endpoint = <&merge_funnel_in1>; + }; + }; + }; + + in-ports { + #address-cells = <1>; + #size-cells = <0>; + + port@4 { + reg = <4>; + funnel1_in4: endpoint { + remote-endpoint = <&swao_replicator_out>; + }; + }; + }; + }; + + funnel@6043000 { + compatible = "arm,coresight-dynamic-funnel", "arm,primecell"; + reg = <0 0x06043000 0 0x1000>; + + clocks = <&aoss_qmp>; + clock-names = "apb_pclk"; + + out-ports { + port { + funnel2_out: endpoint { + remote-endpoint = <&merge_funnel_in2>; + }; + }; + }; + + in-ports { + #address-cells = <1>; + #size-cells = <0>; + + port@2 { + reg = <2>; + funnel2_in2: endpoint { + remote-endpoint = <&apss_merge_funnel_out>; + }; + }; + }; + }; + + funnel@6045000 { + compatible = "arm,coresight-dynamic-funnel", "arm,primecell"; + reg = <0 0x06045000 0 0x1000>; + + clocks = <&aoss_qmp>; + clock-names = "apb_pclk"; + + out-ports { + port { + merge_funnel_out: endpoint { + remote-endpoint = <&etf_in>; + }; + }; + }; + + in-ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + merge_funnel_in0: endpoint { + remote-endpoint = <&funnel0_out>; + }; + }; + + port@1 { + reg = <1>; + merge_funnel_in1: endpoint { + remote-endpoint = <&funnel1_out>; + }; + }; + + port@2 { + reg = <2>; + merge_funnel_in2: endpoint { + remote-endpoint = <&funnel2_out>; + }; + }; + }; + }; + + replicator@6046000 { + compatible = "arm,coresight-dynamic-replicator", "arm,primecell"; + reg = <0 0x06046000 0 0x1000>; + + clocks = <&aoss_qmp>; + clock-names = "apb_pclk"; + + out-ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + replicator_out0: endpoint { + remote-endpoint = <&etr_in>; + }; + }; + + port@1 { + reg = <1>; + replicator_out1: endpoint { + remote-endpoint = <&replicator1_in>; + }; + }; + }; + + in-ports { + port { + replicator_in0: endpoint { + remote-endpoint = <&etf_out>; + }; + }; + }; + }; + + etf@6047000 { + compatible = "arm,coresight-tmc", "arm,primecell"; + reg = <0 0x06047000 0 0x1000>; + + clocks = <&aoss_qmp>; + clock-names = "apb_pclk"; + + out-ports { + port { + etf_out: endpoint { + remote-endpoint = <&replicator_in0>; + }; + }; + }; + + in-ports { + port { + etf_in: endpoint { + remote-endpoint = <&merge_funnel_out>; + }; + }; + }; + }; + + etr@6048000 { + compatible = "arm,coresight-tmc", "arm,primecell"; + reg = <0 0x06048000 0 0x1000>; + iommus = <&apps_smmu 0x05e0 0x0>; + + clocks = <&aoss_qmp>; + clock-names = "apb_pclk"; + arm,scatter-gather; + + in-ports { + port { + etr_in: endpoint { + remote-endpoint = <&replicator_out0>; + }; + }; + }; + }; + + replicator@604a000 { + compatible = "arm,coresight-dynamic-replicator", "arm,primecell"; + reg = <0 0x0604a000 0 0x1000>; + + clocks = <&aoss_qmp>; + clock-names = "apb_pclk"; + + out-ports { + #address-cells = <1>; + #size-cells = <0>; + + port@1 { + reg = <1>; + replicator1_out: endpoint { + remote-endpoint = <&swao_funnel_in>; + }; + }; + }; + + in-ports { + + port { + replicator1_in: endpoint { + remote-endpoint = <&replicator_out1>; + }; + }; + }; + }; + + funnel@6b08000 { + compatible = "arm,coresight-dynamic-funnel", "arm,primecell"; + reg = <0 0x06b08000 0 0x1000>; + + clocks = <&aoss_qmp>; + clock-names = "apb_pclk"; + + out-ports { + port { + swao_funnel_out: endpoint { + remote-endpoint = <&swao_etf_in>; + }; + }; + }; + + in-ports { + #address-cells = <1>; + #size-cells = <0>; + + port@6 { + reg = <6>; + swao_funnel_in: endpoint { + remote-endpoint = <&replicator1_out>; + }; + }; + }; + }; + + etf@6b09000 { + compatible = "arm,coresight-tmc", "arm,primecell"; + reg = <0 0x06b09000 0 0x1000>; + + clocks = <&aoss_qmp>; + clock-names = "apb_pclk"; + + out-ports { + port { + swao_etf_out: endpoint { + remote-endpoint = <&swao_replicator_in>; + }; + }; + }; + + in-ports { + port { + swao_etf_in: endpoint { + remote-endpoint = <&swao_funnel_out>; + }; + }; + }; + }; + + replicator@6b0a000 { + compatible = "arm,coresight-dynamic-replicator", "arm,primecell"; + reg = <0 0x06b0a000 0 0x1000>; + + clocks = <&aoss_qmp>; + clock-names = "apb_pclk"; + qcom,replicator-loses-context; + + out-ports { + port { + swao_replicator_out: endpoint { + remote-endpoint = <&funnel1_in4>; + }; + }; + }; + + in-ports { + port { + swao_replicator_in: endpoint { + remote-endpoint = <&swao_etf_out>; + }; + }; + }; + }; + + etm@7040000 { + compatible = "arm,coresight-etm4x", "arm,primecell"; + reg = <0 0x07040000 0 0x1000>; + + cpu = <&CPU0>; + + clocks = <&aoss_qmp>; + clock-names = "apb_pclk"; + arm,coresight-loses-context-with-cpu; + qcom,skip-power-up; + + out-ports { + port { + etm0_out: endpoint { + remote-endpoint = <&apss_funnel_in0>; + }; + }; + }; + }; + + etm@7140000 { + compatible = "arm,coresight-etm4x", "arm,primecell"; + reg = <0 0x07140000 0 0x1000>; + + cpu = <&CPU1>; + + clocks = <&aoss_qmp>; + clock-names = "apb_pclk"; + arm,coresight-loses-context-with-cpu; + qcom,skip-power-up; + + out-ports { + port { + etm1_out: endpoint { + remote-endpoint = <&apss_funnel_in1>; + }; + }; + }; + }; + + etm@7240000 { + compatible = "arm,coresight-etm4x", "arm,primecell"; + reg = <0 0x07240000 0 0x1000>; + + cpu = <&CPU2>; + + clocks = <&aoss_qmp>; + clock-names = "apb_pclk"; + arm,coresight-loses-context-with-cpu; + qcom,skip-power-up; + + out-ports { + port { + etm2_out: endpoint { + remote-endpoint = <&apss_funnel_in2>; + }; + }; + }; + }; + + etm@7340000 { + compatible = "arm,coresight-etm4x", "arm,primecell"; + reg = <0 0x07340000 0 0x1000>; + + cpu = <&CPU3>; + + clocks = <&aoss_qmp>; + clock-names = "apb_pclk"; + arm,coresight-loses-context-with-cpu; + qcom,skip-power-up; + + out-ports { + port { + etm3_out: endpoint { + remote-endpoint = <&apss_funnel_in3>; + }; + }; + }; + }; + + etm@7440000 { + compatible = "arm,coresight-etm4x", "arm,primecell"; + reg = <0 0x07440000 0 0x1000>; + + cpu = <&CPU4>; + + clocks = <&aoss_qmp>; + clock-names = "apb_pclk"; + arm,coresight-loses-context-with-cpu; + qcom,skip-power-up; + + out-ports { + port { + etm4_out: endpoint { + remote-endpoint = <&apss_funnel_in4>; + }; + }; + }; + }; + + etm@7540000 { + compatible = "arm,coresight-etm4x", "arm,primecell"; + reg = <0 0x07540000 0 0x1000>; + + cpu = <&CPU5>; + + clocks = <&aoss_qmp>; + clock-names = "apb_pclk"; + arm,coresight-loses-context-with-cpu; + qcom,skip-power-up; + + out-ports { + port { + etm5_out: endpoint { + remote-endpoint = <&apss_funnel_in5>; + }; + }; + }; + }; + + etm@7640000 { + compatible = "arm,coresight-etm4x", "arm,primecell"; + reg = <0 0x07640000 0 0x1000>; + + cpu = <&CPU6>; + + clocks = <&aoss_qmp>; + clock-names = "apb_pclk"; + arm,coresight-loses-context-with-cpu; + qcom,skip-power-up; + + out-ports { + port { + etm6_out: endpoint { + remote-endpoint = <&apss_funnel_in6>; + }; + }; + }; + }; + + etm@7740000 { + compatible = "arm,coresight-etm4x", "arm,primecell"; + reg = <0 0x07740000 0 0x1000>; + + cpu = <&CPU7>; + + clocks = <&aoss_qmp>; + clock-names = "apb_pclk"; + arm,coresight-loses-context-with-cpu; + qcom,skip-power-up; + + out-ports { + port { + etm7_out: endpoint { + remote-endpoint = <&apss_funnel_in7>; + }; + }; + }; + }; + + funnel@7800000 { /* APSS Funnel */ + compatible = "arm,coresight-dynamic-funnel", "arm,primecell"; + reg = <0 0x07800000 0 0x1000>; + + clocks = <&aoss_qmp>; + clock-names = "apb_pclk"; + + out-ports { + port { + apss_funnel_out: endpoint { + remote-endpoint = <&apss_merge_funnel_in>; + }; + }; + }; + + in-ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + apss_funnel_in0: endpoint { + remote-endpoint = <&etm0_out>; + }; + }; + + port@1 { + reg = <1>; + apss_funnel_in1: endpoint { + remote-endpoint = <&etm1_out>; + }; + }; + + port@2 { + reg = <2>; + apss_funnel_in2: endpoint { + remote-endpoint = <&etm2_out>; + }; + }; + + port@3 { + reg = <3>; + apss_funnel_in3: endpoint { + remote-endpoint = <&etm3_out>; + }; + }; + + port@4 { + reg = <4>; + apss_funnel_in4: endpoint { + remote-endpoint = <&etm4_out>; + }; + }; + + port@5 { + reg = <5>; + apss_funnel_in5: endpoint { + remote-endpoint = <&etm5_out>; + }; + }; + + port@6 { + reg = <6>; + apss_funnel_in6: endpoint { + remote-endpoint = <&etm6_out>; + }; + }; + + port@7 { + reg = <7>; + apss_funnel_in7: endpoint { + remote-endpoint = <&etm7_out>; + }; + }; + }; + }; + + funnel@7810000 { + compatible = "arm,coresight-dynamic-funnel", "arm,primecell"; + reg = <0 0x07810000 0 0x1000>; + + clocks = <&aoss_qmp>; + clock-names = "apb_pclk"; + + out-ports { + port { + apss_merge_funnel_out: endpoint { + remote-endpoint = <&funnel2_in2>; + }; + }; + }; + + in-ports { + port { + apss_merge_funnel_in: endpoint { + remote-endpoint = <&apss_funnel_out>; + }; + }; + }; + }; + + remoteproc_cdsp: remoteproc@8300000 { + compatible = "qcom,sm8150-cdsp-pas"; + reg = <0x0 0x08300000 0x0 0x4040>; + + interrupts-extended = <&intc GIC_SPI 578 IRQ_TYPE_EDGE_RISING>, + <&cdsp_smp2p_in 0 IRQ_TYPE_EDGE_RISING>, + <&cdsp_smp2p_in 1 IRQ_TYPE_EDGE_RISING>, + <&cdsp_smp2p_in 2 IRQ_TYPE_EDGE_RISING>, + <&cdsp_smp2p_in 3 IRQ_TYPE_EDGE_RISING>; + interrupt-names = "wdog", "fatal", "ready", + "handover", "stop-ack"; + + clocks = <&rpmhcc RPMH_CXO_CLK>; + clock-names = "xo"; + + power-domains = <&rpmhpd SM8150_CX>; + + memory-region = <&cdsp_mem>; + + qcom,qmp = <&aoss_qmp>; + + qcom,smem-states = <&cdsp_smp2p_out 0>; + qcom,smem-state-names = "stop"; + + status = "disabled"; + + glink-edge { + interrupts = <GIC_SPI 574 IRQ_TYPE_EDGE_RISING>; + label = "cdsp"; + qcom,remote-pid = <5>; + mboxes = <&apss_shared 4>; + + fastrpc { + compatible = "qcom,fastrpc"; + qcom,glink-channels = "fastrpcglink-apps-dsp"; + label = "cdsp"; + qcom,non-secure-domain; + #address-cells = <1>; + #size-cells = <0>; + + compute-cb@1 { + compatible = "qcom,fastrpc-compute-cb"; + reg = <1>; + iommus = <&apps_smmu 0x1001 0x0460>; + }; + + compute-cb@2 { + compatible = "qcom,fastrpc-compute-cb"; + reg = <2>; + iommus = <&apps_smmu 0x1002 0x0460>; + }; + + compute-cb@3 { + compatible = "qcom,fastrpc-compute-cb"; + reg = <3>; + iommus = <&apps_smmu 0x1003 0x0460>; + }; + + compute-cb@4 { + compatible = "qcom,fastrpc-compute-cb"; + reg = <4>; + iommus = <&apps_smmu 0x1004 0x0460>; + }; + + compute-cb@5 { + compatible = "qcom,fastrpc-compute-cb"; + reg = <5>; + iommus = <&apps_smmu 0x1005 0x0460>; + }; + + compute-cb@6 { + compatible = "qcom,fastrpc-compute-cb"; + reg = <6>; + iommus = <&apps_smmu 0x1006 0x0460>; + }; + + compute-cb@7 { + compatible = "qcom,fastrpc-compute-cb"; + reg = <7>; + iommus = <&apps_smmu 0x1007 0x0460>; + }; + + compute-cb@8 { + compatible = "qcom,fastrpc-compute-cb"; + reg = <8>; + iommus = <&apps_smmu 0x1008 0x0460>; + }; + + /* note: secure cb9 in downstream */ + }; + }; + }; + + usb_1_hsphy: phy@88e2000 { + compatible = "qcom,sm8150-usb-hs-phy", + "qcom,usb-snps-hs-7nm-phy"; + reg = <0 0x088e2000 0 0x400>; + status = "disabled"; + #phy-cells = <0>; + + clocks = <&rpmhcc RPMH_CXO_CLK>; + clock-names = "ref"; + + resets = <&gcc GCC_QUSB2PHY_PRIM_BCR>; + }; + + usb_2_hsphy: phy@88e3000 { + compatible = "qcom,sm8150-usb-hs-phy", + "qcom,usb-snps-hs-7nm-phy"; + reg = <0 0x088e3000 0 0x400>; + status = "disabled"; + #phy-cells = <0>; + + clocks = <&rpmhcc RPMH_CXO_CLK>; + clock-names = "ref"; + + resets = <&gcc GCC_QUSB2PHY_SEC_BCR>; + }; + + usb_1_qmpphy: phy@88e8000 { + compatible = "qcom,sm8150-qmp-usb3-dp-phy"; + reg = <0 0x088e8000 0 0x3000>; + + clocks = <&gcc GCC_USB3_PRIM_PHY_AUX_CLK>, + <&gcc GCC_USB3_PRIM_CLKREF_CLK>, + <&gcc GCC_USB3_PRIM_PHY_COM_AUX_CLK>, + <&gcc GCC_USB3_PRIM_PHY_PIPE_CLK>; + clock-names = "aux", + "ref", + "com_aux", + "usb3_pipe"; + + resets = <&gcc GCC_USB3_DP_PHY_PRIM_BCR>, + <&gcc GCC_USB3_PHY_PRIM_BCR>; + reset-names = "phy", "common"; + + #clock-cells = <1>; + #phy-cells = <1>; + + status = "disabled"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + + usb_1_qmpphy_out: endpoint { + }; + }; + + port@1 { + reg = <1>; + + usb_1_qmpphy_usb_ss_in: endpoint { + }; + }; + + port@2 { + reg = <2>; + + usb_1_qmpphy_dp_in: endpoint { + }; + }; + }; + }; + + usb_2_qmpphy: phy@88eb000 { + compatible = "qcom,sm8150-qmp-usb3-uni-phy"; + reg = <0 0x088eb000 0 0x1000>; + + clocks = <&gcc GCC_USB3_SEC_PHY_AUX_CLK>, + <&gcc GCC_USB3_SEC_CLKREF_CLK>, + <&gcc GCC_USB3_SEC_PHY_COM_AUX_CLK>, + <&gcc GCC_USB3_SEC_PHY_PIPE_CLK>; + clock-names = "aux", + "ref", + "com_aux", + "pipe"; + clock-output-names = "usb3_uni_phy_pipe_clk_src"; + #clock-cells = <0>; + #phy-cells = <0>; + + resets = <&gcc GCC_USB3_PHY_SEC_BCR>, + <&gcc GCC_USB3PHY_PHY_SEC_BCR>; + reset-names = "phy", + "phy_phy"; + + status = "disabled"; + }; + + sdhc_2: mmc@8804000 { + compatible = "qcom,sm8150-sdhci", "qcom,sdhci-msm-v5"; + reg = <0 0x08804000 0 0x1000>; + + interrupts = <GIC_SPI 204 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 222 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "hc_irq", "pwr_irq"; + + clocks = <&gcc GCC_SDCC2_AHB_CLK>, + <&gcc GCC_SDCC2_APPS_CLK>, + <&rpmhcc RPMH_CXO_CLK>; + clock-names = "iface", "core", "xo"; + iommus = <&apps_smmu 0x6a0 0x0>; + qcom,dll-config = <0x0007642c>; + qcom,ddr-config = <0x80040868>; + power-domains = <&rpmhpd 0>; + operating-points-v2 = <&sdhc2_opp_table>; + + status = "disabled"; + + sdhc2_opp_table: opp-table { + compatible = "operating-points-v2"; + + opp-19200000 { + opp-hz = /bits/ 64 <19200000>; + required-opps = <&rpmhpd_opp_min_svs>; + }; + + opp-50000000 { + opp-hz = /bits/ 64 <50000000>; + required-opps = <&rpmhpd_opp_low_svs>; + }; + + opp-100000000 { + opp-hz = /bits/ 64 <100000000>; + required-opps = <&rpmhpd_opp_svs>; + }; + + opp-202000000 { + opp-hz = /bits/ 64 <202000000>; + required-opps = <&rpmhpd_opp_svs_l1>; + }; + }; + }; + + dc_noc: interconnect@9160000 { + compatible = "qcom,sm8150-dc-noc"; + reg = <0 0x09160000 0 0x3200>; + #interconnect-cells = <2>; + qcom,bcm-voters = <&apps_bcm_voter>; + }; + + gem_noc: interconnect@9680000 { + compatible = "qcom,sm8150-gem-noc"; + reg = <0 0x09680000 0 0x3e200>; + #interconnect-cells = <2>; + qcom,bcm-voters = <&apps_bcm_voter>; + }; + + usb_1: usb@a6f8800 { + compatible = "qcom,sm8150-dwc3", "qcom,dwc3"; + reg = <0 0x0a6f8800 0 0x400>; + status = "disabled"; + #address-cells = <2>; + #size-cells = <2>; + ranges; + dma-ranges; + + clocks = <&gcc GCC_CFG_NOC_USB3_PRIM_AXI_CLK>, + <&gcc GCC_USB30_PRIM_MASTER_CLK>, + <&gcc GCC_AGGRE_USB3_PRIM_AXI_CLK>, + <&gcc GCC_USB30_PRIM_SLEEP_CLK>, + <&gcc GCC_USB30_PRIM_MOCK_UTMI_CLK>, + <&gcc GCC_USB3_SEC_CLKREF_CLK>; + clock-names = "cfg_noc", + "core", + "iface", + "sleep", + "mock_utmi", + "xo"; + + assigned-clocks = <&gcc GCC_USB30_PRIM_MOCK_UTMI_CLK>, + <&gcc GCC_USB30_PRIM_MASTER_CLK>; + assigned-clock-rates = <19200000>, <200000000>; + + interrupts-extended = <&intc GIC_SPI 131 IRQ_TYPE_LEVEL_HIGH>, + <&pdc 6 IRQ_TYPE_LEVEL_HIGH>, + <&pdc 8 IRQ_TYPE_EDGE_BOTH>, + <&pdc 9 IRQ_TYPE_EDGE_BOTH>; + interrupt-names = "hs_phy_irq", "ss_phy_irq", + "dm_hs_phy_irq", "dp_hs_phy_irq"; + + power-domains = <&gcc USB30_PRIM_GDSC>; + + resets = <&gcc GCC_USB30_PRIM_BCR>; + + interconnects = <&aggre1_noc MASTER_USB3 0 &mc_virt SLAVE_EBI_CH0 0>, + <&gem_noc MASTER_AMPSS_M0 0 &config_noc SLAVE_USB3 0>; + interconnect-names = "usb-ddr", "apps-usb"; + + usb_1_dwc3: usb@a600000 { + compatible = "snps,dwc3"; + reg = <0 0x0a600000 0 0xcd00>; + interrupts = <GIC_SPI 133 IRQ_TYPE_LEVEL_HIGH>; + iommus = <&apps_smmu 0x140 0>; + snps,dis_u2_susphy_quirk; + snps,dis_enblslpm_quirk; + phys = <&usb_1_hsphy>, <&usb_1_qmpphy QMP_USB43DP_USB3_PHY>; + phy-names = "usb2-phy", "usb3-phy"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + + usb_1_dwc3_hs: endpoint { + }; + }; + + port@1 { + reg = <1>; + + usb_1_dwc3_ss: endpoint { + }; + }; + }; + }; + }; + + usb_2: usb@a8f8800 { + compatible = "qcom,sm8150-dwc3", "qcom,dwc3"; + reg = <0 0x0a8f8800 0 0x400>; + status = "disabled"; + #address-cells = <2>; + #size-cells = <2>; + ranges; + dma-ranges; + + clocks = <&gcc GCC_CFG_NOC_USB3_SEC_AXI_CLK>, + <&gcc GCC_USB30_SEC_MASTER_CLK>, + <&gcc GCC_AGGRE_USB3_SEC_AXI_CLK>, + <&gcc GCC_USB30_SEC_SLEEP_CLK>, + <&gcc GCC_USB30_SEC_MOCK_UTMI_CLK>, + <&gcc GCC_USB3_SEC_CLKREF_CLK>; + clock-names = "cfg_noc", + "core", + "iface", + "sleep", + "mock_utmi", + "xo"; + + assigned-clocks = <&gcc GCC_USB30_SEC_MOCK_UTMI_CLK>, + <&gcc GCC_USB30_SEC_MASTER_CLK>; + assigned-clock-rates = <19200000>, <200000000>; + + interrupts-extended = <&intc GIC_SPI 136 IRQ_TYPE_LEVEL_HIGH>, + <&pdc 7 IRQ_TYPE_LEVEL_HIGH>, + <&pdc 10 IRQ_TYPE_EDGE_BOTH>, + <&pdc 11 IRQ_TYPE_EDGE_BOTH>; + interrupt-names = "hs_phy_irq", "ss_phy_irq", + "dm_hs_phy_irq", "dp_hs_phy_irq"; + + power-domains = <&gcc USB30_SEC_GDSC>; + + resets = <&gcc GCC_USB30_SEC_BCR>; + + interconnects = <&aggre1_noc MASTER_USB3_1 0 &mc_virt SLAVE_EBI_CH0 0>, + <&gem_noc MASTER_AMPSS_M0 0 &config_noc SLAVE_USB3_1 0>; + interconnect-names = "usb-ddr", "apps-usb"; + + usb_2_dwc3: usb@a800000 { + compatible = "snps,dwc3"; + reg = <0 0x0a800000 0 0xcd00>; + interrupts = <GIC_SPI 138 IRQ_TYPE_LEVEL_HIGH>; + iommus = <&apps_smmu 0x160 0>; + snps,dis_u2_susphy_quirk; + snps,dis_enblslpm_quirk; + phys = <&usb_2_hsphy>, <&usb_2_qmpphy>; + phy-names = "usb2-phy", "usb3-phy"; + }; + }; + + camnoc_virt: interconnect@ac00000 { + compatible = "qcom,sm8150-camnoc-virt"; + reg = <0 0x0ac00000 0 0x1000>; + #interconnect-cells = <2>; + qcom,bcm-voters = <&apps_bcm_voter>; + }; + + mdss: display-subsystem@ae00000 { + compatible = "qcom,sm8150-mdss"; + reg = <0 0x0ae00000 0 0x1000>; + reg-names = "mdss"; + + interconnects = <&mmss_noc MASTER_MDP_PORT0 0 &mc_virt SLAVE_EBI_CH0 0>, + <&mmss_noc MASTER_MDP_PORT1 0 &mc_virt SLAVE_EBI_CH0 0>; + interconnect-names = "mdp0-mem", "mdp1-mem"; + + power-domains = <&dispcc MDSS_GDSC>; + + clocks = <&dispcc DISP_CC_MDSS_AHB_CLK>, + <&gcc GCC_DISP_HF_AXI_CLK>, + <&gcc GCC_DISP_SF_AXI_CLK>, + <&dispcc DISP_CC_MDSS_MDP_CLK>; + clock-names = "iface", "bus", "nrt_bus", "core"; + + interrupts = <GIC_SPI 83 IRQ_TYPE_LEVEL_HIGH>; + interrupt-controller; + #interrupt-cells = <1>; + + iommus = <&apps_smmu 0x800 0x420>; + + status = "disabled"; + + #address-cells = <2>; + #size-cells = <2>; + ranges; + + mdss_mdp: display-controller@ae01000 { + compatible = "qcom,sm8150-dpu"; + reg = <0 0x0ae01000 0 0x8f000>, + <0 0x0aeb0000 0 0x2008>; + reg-names = "mdp", "vbif"; + + clocks = <&dispcc DISP_CC_MDSS_AHB_CLK>, + <&gcc GCC_DISP_HF_AXI_CLK>, + <&dispcc DISP_CC_MDSS_MDP_CLK>, + <&dispcc DISP_CC_MDSS_VSYNC_CLK>; + clock-names = "iface", "bus", "core", "vsync"; + + assigned-clocks = <&dispcc DISP_CC_MDSS_VSYNC_CLK>; + assigned-clock-rates = <19200000>; + + operating-points-v2 = <&mdp_opp_table>; + power-domains = <&rpmhpd SM8150_MMCX>; + + interrupt-parent = <&mdss>; + interrupts = <0>; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + dpu_intf1_out: endpoint { + remote-endpoint = <&mdss_dsi0_in>; + }; + }; + + port@1 { + reg = <1>; + dpu_intf2_out: endpoint { + remote-endpoint = <&mdss_dsi1_in>; + }; + }; + + port@2 { + reg = <2>; + dpu_intf0_out: endpoint { + remote-endpoint = <&mdss_dp_in>; + }; + }; + }; + + mdp_opp_table: opp-table { + compatible = "operating-points-v2"; + + opp-171428571 { + opp-hz = /bits/ 64 <171428571>; + required-opps = <&rpmhpd_opp_low_svs>; + }; + + opp-300000000 { + opp-hz = /bits/ 64 <300000000>; + required-opps = <&rpmhpd_opp_svs>; + }; + + opp-345000000 { + opp-hz = /bits/ 64 <345000000>; + required-opps = <&rpmhpd_opp_svs_l1>; + }; + + opp-460000000 { + opp-hz = /bits/ 64 <460000000>; + required-opps = <&rpmhpd_opp_nom>; + }; + }; + }; + + mdss_dp: displayport-controller@ae90000 { + compatible = "qcom,sm8150-dp", "qcom,sm8350-dp"; + reg = <0 0xae90000 0 0x200>, + <0 0xae90200 0 0x200>, + <0 0xae90400 0 0x600>, + <0 0x0ae90a00 0 0x600>, + <0 0x0ae91000 0 0x600>; + + interrupt-parent = <&mdss>; + interrupts = <12>; + clocks = <&dispcc DISP_CC_MDSS_AHB_CLK>, + <&dispcc DISP_CC_MDSS_DP_AUX_CLK>, + <&dispcc DISP_CC_MDSS_DP_LINK_CLK>, + <&dispcc DISP_CC_MDSS_DP_LINK_INTF_CLK>, + <&dispcc DISP_CC_MDSS_DP_PIXEL_CLK>; + clock-names = "core_iface", + "core_aux", + "ctrl_link", + "ctrl_link_iface", + "stream_pixel"; + + assigned-clocks = <&dispcc DISP_CC_MDSS_DP_LINK_CLK_SRC>, + <&dispcc DISP_CC_MDSS_DP_PIXEL_CLK_SRC>; + assigned-clock-parents = <&usb_1_qmpphy QMP_USB43DP_DP_LINK_CLK>, + <&usb_1_qmpphy QMP_USB43DP_DP_VCO_DIV_CLK>; + + phys = <&usb_1_qmpphy QMP_USB43DP_DP_PHY>; + phy-names = "dp"; + + #sound-dai-cells = <0>; + + operating-points-v2 = <&dp_opp_table>; + power-domains = <&rpmhpd SM8250_MMCX>; + + status = "disabled"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + mdss_dp_in: endpoint { + remote-endpoint = <&dpu_intf0_out>; + }; + }; + + port@1 { + reg = <1>; + + mdss_dp_out: endpoint { + }; + }; + }; + + dp_opp_table: opp-table { + compatible = "operating-points-v2"; + + opp-160000000 { + opp-hz = /bits/ 64 <160000000>; + required-opps = <&rpmhpd_opp_low_svs>; + }; + + opp-270000000 { + opp-hz = /bits/ 64 <270000000>; + required-opps = <&rpmhpd_opp_svs>; + }; + + opp-540000000 { + opp-hz = /bits/ 64 <540000000>; + required-opps = <&rpmhpd_opp_svs_l1>; + }; + + opp-810000000 { + opp-hz = /bits/ 64 <810000000>; + required-opps = <&rpmhpd_opp_nom>; + }; + }; + }; + + mdss_dsi0: dsi@ae94000 { + compatible = "qcom,sm8150-dsi-ctrl", "qcom,mdss-dsi-ctrl"; + reg = <0 0x0ae94000 0 0x400>; + reg-names = "dsi_ctrl"; + + interrupt-parent = <&mdss>; + interrupts = <4>; + + clocks = <&dispcc DISP_CC_MDSS_BYTE0_CLK>, + <&dispcc DISP_CC_MDSS_BYTE0_INTF_CLK>, + <&dispcc DISP_CC_MDSS_PCLK0_CLK>, + <&dispcc DISP_CC_MDSS_ESC0_CLK>, + <&dispcc DISP_CC_MDSS_AHB_CLK>, + <&gcc GCC_DISP_HF_AXI_CLK>; + clock-names = "byte", + "byte_intf", + "pixel", + "core", + "iface", + "bus"; + + assigned-clocks = <&dispcc DISP_CC_MDSS_BYTE0_CLK_SRC>, + <&dispcc DISP_CC_MDSS_PCLK0_CLK_SRC>; + assigned-clock-parents = <&mdss_dsi0_phy 0>, + <&mdss_dsi0_phy 1>; + + operating-points-v2 = <&dsi_opp_table>; + power-domains = <&rpmhpd SM8150_MMCX>; + + phys = <&mdss_dsi0_phy>; + + status = "disabled"; + + #address-cells = <1>; + #size-cells = <0>; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + mdss_dsi0_in: endpoint { + remote-endpoint = <&dpu_intf1_out>; + }; + }; + + port@1 { + reg = <1>; + mdss_dsi0_out: endpoint { + }; + }; + }; + + dsi_opp_table: opp-table { + compatible = "operating-points-v2"; + + opp-187500000 { + opp-hz = /bits/ 64 <187500000>; + required-opps = <&rpmhpd_opp_low_svs>; + }; + + opp-300000000 { + opp-hz = /bits/ 64 <300000000>; + required-opps = <&rpmhpd_opp_svs>; + }; + + opp-358000000 { + opp-hz = /bits/ 64 <358000000>; + required-opps = <&rpmhpd_opp_svs_l1>; + }; + }; + }; + + mdss_dsi0_phy: phy@ae94400 { + compatible = "qcom,dsi-phy-7nm-8150"; + reg = <0 0x0ae94400 0 0x200>, + <0 0x0ae94600 0 0x280>, + <0 0x0ae94900 0 0x260>; + reg-names = "dsi_phy", + "dsi_phy_lane", + "dsi_pll"; + + #clock-cells = <1>; + #phy-cells = <0>; + + clocks = <&dispcc DISP_CC_MDSS_AHB_CLK>, + <&rpmhcc RPMH_CXO_CLK>; + clock-names = "iface", "ref"; + + status = "disabled"; + }; + + mdss_dsi1: dsi@ae96000 { + compatible = "qcom,sm8150-dsi-ctrl", "qcom,mdss-dsi-ctrl"; + reg = <0 0x0ae96000 0 0x400>; + reg-names = "dsi_ctrl"; + + interrupt-parent = <&mdss>; + interrupts = <5>; + + clocks = <&dispcc DISP_CC_MDSS_BYTE1_CLK>, + <&dispcc DISP_CC_MDSS_BYTE1_INTF_CLK>, + <&dispcc DISP_CC_MDSS_PCLK1_CLK>, + <&dispcc DISP_CC_MDSS_ESC1_CLK>, + <&dispcc DISP_CC_MDSS_AHB_CLK>, + <&gcc GCC_DISP_HF_AXI_CLK>; + clock-names = "byte", + "byte_intf", + "pixel", + "core", + "iface", + "bus"; + + assigned-clocks = <&dispcc DISP_CC_MDSS_BYTE1_CLK_SRC>, + <&dispcc DISP_CC_MDSS_PCLK1_CLK_SRC>; + assigned-clock-parents = <&mdss_dsi1_phy 0>, + <&mdss_dsi1_phy 1>; + + operating-points-v2 = <&dsi_opp_table>; + power-domains = <&rpmhpd SM8150_MMCX>; + + phys = <&mdss_dsi1_phy>; + + status = "disabled"; + + #address-cells = <1>; + #size-cells = <0>; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + mdss_dsi1_in: endpoint { + remote-endpoint = <&dpu_intf2_out>; + }; + }; + + port@1 { + reg = <1>; + mdss_dsi1_out: endpoint { + }; + }; + }; + }; + + mdss_dsi1_phy: phy@ae96400 { + compatible = "qcom,dsi-phy-7nm-8150"; + reg = <0 0x0ae96400 0 0x200>, + <0 0x0ae96600 0 0x280>, + <0 0x0ae96900 0 0x260>; + reg-names = "dsi_phy", + "dsi_phy_lane", + "dsi_pll"; + + #clock-cells = <1>; + #phy-cells = <0>; + + clocks = <&dispcc DISP_CC_MDSS_AHB_CLK>, + <&rpmhcc RPMH_CXO_CLK>; + clock-names = "iface", "ref"; + + status = "disabled"; + }; + }; + + dispcc: clock-controller@af00000 { + compatible = "qcom,sm8150-dispcc"; + reg = <0 0x0af00000 0 0x10000>; + clocks = <&rpmhcc RPMH_CXO_CLK>, + <&mdss_dsi0_phy 0>, + <&mdss_dsi0_phy 1>, + <&mdss_dsi1_phy 0>, + <&mdss_dsi1_phy 1>, + <&usb_1_qmpphy QMP_USB43DP_DP_LINK_CLK>, + <&usb_1_qmpphy QMP_USB43DP_DP_VCO_DIV_CLK>; + clock-names = "bi_tcxo", + "dsi0_phy_pll_out_byteclk", + "dsi0_phy_pll_out_dsiclk", + "dsi1_phy_pll_out_byteclk", + "dsi1_phy_pll_out_dsiclk", + "dp_phy_pll_link_clk", + "dp_phy_pll_vco_div_clk"; + power-domains = <&rpmhpd SM8150_MMCX>; + required-opps = <&rpmhpd_opp_low_svs>; + #clock-cells = <1>; + #reset-cells = <1>; + #power-domain-cells = <1>; + }; + + pdc: interrupt-controller@b220000 { + compatible = "qcom,sm8150-pdc", "qcom,pdc"; + reg = <0 0x0b220000 0 0x30000>; + qcom,pdc-ranges = <0 480 94>, <94 609 31>, + <125 63 1>; + #interrupt-cells = <2>; + interrupt-parent = <&intc>; + interrupt-controller; + }; + + aoss_qmp: power-management@c300000 { + compatible = "qcom,sm8150-aoss-qmp", "qcom,aoss-qmp"; + reg = <0x0 0x0c300000 0x0 0x400>; + interrupts = <GIC_SPI 389 IRQ_TYPE_EDGE_RISING>; + mboxes = <&apss_shared 0>; + + #clock-cells = <0>; + }; + + sram@c3f0000 { + compatible = "qcom,rpmh-stats"; + reg = <0 0x0c3f0000 0 0x400>; + }; + + tsens0: thermal-sensor@c263000 { + compatible = "qcom,sm8150-tsens", "qcom,tsens-v2"; + reg = <0 0x0c263000 0 0x1ff>, /* TM */ + <0 0x0c222000 0 0x1ff>; /* SROT */ + #qcom,sensors = <16>; + interrupts = <GIC_SPI 506 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 508 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "uplow", "critical"; + #thermal-sensor-cells = <1>; + }; + + tsens1: thermal-sensor@c265000 { + compatible = "qcom,sm8150-tsens", "qcom,tsens-v2"; + reg = <0 0x0c265000 0 0x1ff>, /* TM */ + <0 0x0c223000 0 0x1ff>; /* SROT */ + #qcom,sensors = <8>; + interrupts = <GIC_SPI 507 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 509 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "uplow", "critical"; + #thermal-sensor-cells = <1>; + }; + + spmi_bus: spmi@c440000 { + compatible = "qcom,spmi-pmic-arb"; + reg = <0x0 0x0c440000 0x0 0x0001100>, + <0x0 0x0c600000 0x0 0x2000000>, + <0x0 0x0e600000 0x0 0x0100000>, + <0x0 0x0e700000 0x0 0x00a0000>, + <0x0 0x0c40a000 0x0 0x0026000>; + reg-names = "core", "chnls", "obsrvr", "intr", "cnfg"; + interrupt-names = "periph_irq"; + interrupts = <GIC_SPI 481 IRQ_TYPE_LEVEL_HIGH>; + qcom,ee = <0>; + qcom,channel = <0>; + #address-cells = <2>; + #size-cells = <0>; + interrupt-controller; + #interrupt-cells = <4>; + }; + + apps_smmu: iommu@15000000 { + compatible = "qcom,sm8150-smmu-500", "qcom,smmu-500", "arm,mmu-500"; + reg = <0 0x15000000 0 0x100000>; + #iommu-cells = <2>; + #global-interrupts = <1>; + interrupts = <GIC_SPI 65 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 97 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 98 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 99 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 100 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 101 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 102 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 103 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 104 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 105 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 106 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 107 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 109 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 110 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 111 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 112 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 113 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 114 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 115 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 116 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 117 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 118 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 181 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 182 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 183 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 184 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 185 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 186 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 187 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 188 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 189 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 190 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 191 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 192 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 315 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 316 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 317 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 318 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 319 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 320 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 321 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 322 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 323 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 324 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 325 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 326 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 327 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 328 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 329 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 330 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 331 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 332 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 333 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 334 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 335 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 336 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 337 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 338 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 339 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 340 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 341 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 342 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 343 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 344 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 345 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 395 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 396 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 397 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 398 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 399 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 400 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 401 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 402 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 403 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 404 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 405 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 406 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 407 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 408 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 409 IRQ_TYPE_LEVEL_HIGH>; + }; + + remoteproc_adsp: remoteproc@17300000 { + compatible = "qcom,sm8150-adsp-pas"; + reg = <0x0 0x17300000 0x0 0x4040>; + + interrupts-extended = <&intc GIC_SPI 162 IRQ_TYPE_EDGE_RISING>, + <&adsp_smp2p_in 0 IRQ_TYPE_EDGE_RISING>, + <&adsp_smp2p_in 1 IRQ_TYPE_EDGE_RISING>, + <&adsp_smp2p_in 2 IRQ_TYPE_EDGE_RISING>, + <&adsp_smp2p_in 3 IRQ_TYPE_EDGE_RISING>; + interrupt-names = "wdog", "fatal", "ready", + "handover", "stop-ack"; + + clocks = <&rpmhcc RPMH_CXO_CLK>; + clock-names = "xo"; + + power-domains = <&rpmhpd SM8150_CX>; + + memory-region = <&adsp_mem>; + + qcom,qmp = <&aoss_qmp>; + + qcom,smem-states = <&adsp_smp2p_out 0>; + qcom,smem-state-names = "stop"; + + status = "disabled"; + + glink-edge { + interrupts = <GIC_SPI 156 IRQ_TYPE_EDGE_RISING>; + label = "lpass"; + qcom,remote-pid = <2>; + mboxes = <&apss_shared 8>; + + fastrpc { + compatible = "qcom,fastrpc"; + qcom,glink-channels = "fastrpcglink-apps-dsp"; + label = "adsp"; + qcom,non-secure-domain; + #address-cells = <1>; + #size-cells = <0>; + + compute-cb@3 { + compatible = "qcom,fastrpc-compute-cb"; + reg = <3>; + iommus = <&apps_smmu 0x1b23 0x0>; + }; + + compute-cb@4 { + compatible = "qcom,fastrpc-compute-cb"; + reg = <4>; + iommus = <&apps_smmu 0x1b24 0x0>; + }; + + compute-cb@5 { + compatible = "qcom,fastrpc-compute-cb"; + reg = <5>; + iommus = <&apps_smmu 0x1b25 0x0>; + }; + }; + }; + }; + + intc: interrupt-controller@17a00000 { + compatible = "arm,gic-v3"; + interrupt-controller; + #interrupt-cells = <3>; + reg = <0x0 0x17a00000 0x0 0x10000>, /* GICD */ + <0x0 0x17a60000 0x0 0x100000>; /* GICR * 8 */ + interrupts = <GIC_PPI 9 IRQ_TYPE_LEVEL_HIGH>; + }; + + apss_shared: mailbox@17c00000 { + compatible = "qcom,sm8150-apss-shared", + "qcom,sdm845-apss-shared"; + reg = <0x0 0x17c00000 0x0 0x1000>; + #mbox-cells = <1>; + }; + + watchdog@17c10000 { + compatible = "qcom,apss-wdt-sm8150", "qcom,kpss-wdt"; + reg = <0 0x17c10000 0 0x1000>; + clocks = <&sleep_clk>; + interrupts = <GIC_SPI 0 IRQ_TYPE_EDGE_RISING>; + }; + + timer@17c20000 { + #address-cells = <1>; + #size-cells = <1>; + ranges = <0 0 0 0x20000000>; + compatible = "arm,armv7-timer-mem"; + reg = <0x0 0x17c20000 0x0 0x1000>; + clock-frequency = <19200000>; + + frame@17c21000 { + frame-number = <0>; + interrupts = <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 6 IRQ_TYPE_LEVEL_HIGH>; + reg = <0x17c21000 0x1000>, + <0x17c22000 0x1000>; + }; + + frame@17c23000 { + frame-number = <1>; + interrupts = <GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>; + reg = <0x17c23000 0x1000>; + status = "disabled"; + }; + + frame@17c25000 { + frame-number = <2>; + interrupts = <GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>; + reg = <0x17c25000 0x1000>; + status = "disabled"; + }; + + frame@17c27000 { + frame-number = <3>; + interrupts = <GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>; + reg = <0x17c26000 0x1000>; + status = "disabled"; + }; + + frame@17c29000 { + frame-number = <4>; + interrupts = <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>; + reg = <0x17c29000 0x1000>; + status = "disabled"; + }; + + frame@17c2b000 { + frame-number = <5>; + interrupts = <GIC_SPI 13 IRQ_TYPE_LEVEL_HIGH>; + reg = <0x17c2b000 0x1000>; + status = "disabled"; + }; + + frame@17c2d000 { + frame-number = <6>; + interrupts = <GIC_SPI 14 IRQ_TYPE_LEVEL_HIGH>; + reg = <0x17c2d000 0x1000>; + status = "disabled"; + }; + }; + + apps_rsc: rsc@18200000 { + label = "apps_rsc"; + compatible = "qcom,rpmh-rsc"; + reg = <0x0 0x18200000 0x0 0x10000>, + <0x0 0x18210000 0x0 0x10000>, + <0x0 0x18220000 0x0 0x10000>; + reg-names = "drv-0", "drv-1", "drv-2"; + interrupts = <GIC_SPI 3 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 5 IRQ_TYPE_LEVEL_HIGH>; + qcom,tcs-offset = <0xd00>; + qcom,drv-id = <2>; + qcom,tcs-config = <ACTIVE_TCS 2>, + <SLEEP_TCS 3>, + <WAKE_TCS 3>, + <CONTROL_TCS 1>; + power-domains = <&CLUSTER_PD>; + + rpmhcc: clock-controller { + compatible = "qcom,sm8150-rpmh-clk"; + #clock-cells = <1>; + clock-names = "xo"; + clocks = <&xo_board>; + }; + + rpmhpd: power-controller { + compatible = "qcom,sm8150-rpmhpd"; + #power-domain-cells = <1>; + operating-points-v2 = <&rpmhpd_opp_table>; + + rpmhpd_opp_table: opp-table { + compatible = "operating-points-v2"; + + rpmhpd_opp_ret: opp1 { + opp-level = <RPMH_REGULATOR_LEVEL_RETENTION>; + }; + + rpmhpd_opp_min_svs: opp2 { + opp-level = <RPMH_REGULATOR_LEVEL_MIN_SVS>; + }; + + rpmhpd_opp_low_svs: opp3 { + opp-level = <RPMH_REGULATOR_LEVEL_LOW_SVS>; + }; + + rpmhpd_opp_svs: opp4 { + opp-level = <RPMH_REGULATOR_LEVEL_SVS>; + }; + + rpmhpd_opp_svs_l1: opp5 { + opp-level = <RPMH_REGULATOR_LEVEL_SVS_L1>; + }; + + rpmhpd_opp_svs_l2: opp6 { + opp-level = <224>; + }; + + rpmhpd_opp_nom: opp7 { + opp-level = <RPMH_REGULATOR_LEVEL_NOM>; + }; + + rpmhpd_opp_nom_l1: opp8 { + opp-level = <RPMH_REGULATOR_LEVEL_NOM_L1>; + }; + + rpmhpd_opp_nom_l2: opp9 { + opp-level = <RPMH_REGULATOR_LEVEL_NOM_L2>; + }; + + rpmhpd_opp_turbo: opp10 { + opp-level = <RPMH_REGULATOR_LEVEL_TURBO>; + }; + + rpmhpd_opp_turbo_l1: opp11 { + opp-level = <RPMH_REGULATOR_LEVEL_TURBO_L1>; + }; + }; + }; + + apps_bcm_voter: bcm-voter { + compatible = "qcom,bcm-voter"; + }; + }; + + osm_l3: interconnect@18321000 { + compatible = "qcom,sm8150-osm-l3", "qcom,osm-l3"; + reg = <0 0x18321000 0 0x1400>; + + clocks = <&rpmhcc RPMH_CXO_CLK>, <&gcc GPLL0>; + clock-names = "xo", "alternate"; + + #interconnect-cells = <1>; + }; + + cpufreq_hw: cpufreq@18323000 { + compatible = "qcom,sm8150-cpufreq-hw", "qcom,cpufreq-hw"; + reg = <0 0x18323000 0 0x1400>, <0 0x18325800 0 0x1400>, + <0 0x18327800 0 0x1400>; + reg-names = "freq-domain0", "freq-domain1", + "freq-domain2"; + + clocks = <&rpmhcc RPMH_CXO_CLK>, <&gcc GPLL0>; + clock-names = "xo", "alternate"; + + #freq-domain-cells = <1>; + #clock-cells = <1>; + }; + + lmh_cluster1: lmh@18350800 { + compatible = "qcom,sm8150-lmh"; + reg = <0 0x18350800 0 0x400>; + interrupts = <GIC_SPI 33 IRQ_TYPE_LEVEL_HIGH>; + cpus = <&CPU4>; + qcom,lmh-temp-arm-millicelsius = <60000>; + qcom,lmh-temp-low-millicelsius = <84500>; + qcom,lmh-temp-high-millicelsius = <85000>; + interrupt-controller; + #interrupt-cells = <1>; + }; + + lmh_cluster0: lmh@18358800 { + compatible = "qcom,sm8150-lmh"; + reg = <0 0x18358800 0 0x400>; + interrupts = <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>; + cpus = <&CPU0>; + qcom,lmh-temp-arm-millicelsius = <60000>; + qcom,lmh-temp-low-millicelsius = <84500>; + qcom,lmh-temp-high-millicelsius = <85000>; + interrupt-controller; + #interrupt-cells = <1>; + }; + + wifi: wifi@18800000 { + compatible = "qcom,wcn3990-wifi"; + reg = <0 0x18800000 0 0x800000>; + reg-names = "membase"; + memory-region = <&wlan_mem>; + clock-names = "cxo_ref_clk_pin", "qdss"; + clocks = <&rpmhcc RPMH_RF_CLK2>, <&aoss_qmp>; + interrupts = <GIC_SPI 414 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 415 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 416 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 417 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 418 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 419 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 420 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 421 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 422 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 423 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 424 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 425 IRQ_TYPE_LEVEL_HIGH>; + iommus = <&apps_smmu 0x0640 0x1>; + status = "disabled"; + }; + }; + + timer { + compatible = "arm,armv8-timer"; + interrupts = <GIC_PPI 1 IRQ_TYPE_LEVEL_LOW>, + <GIC_PPI 2 IRQ_TYPE_LEVEL_LOW>, + <GIC_PPI 3 IRQ_TYPE_LEVEL_LOW>, + <GIC_PPI 0 IRQ_TYPE_LEVEL_LOW>; + }; + + thermal-zones { + cpu0-thermal { + polling-delay-passive = <250>; + polling-delay = <1000>; + + thermal-sensors = <&tsens0 1>; + + trips { + cpu0_alert0: trip-point0 { + temperature = <90000>; + hysteresis = <2000>; + type = "passive"; + }; + + cpu0_alert1: trip-point1 { + temperature = <95000>; + hysteresis = <2000>; + type = "passive"; + }; + + cpu0_crit: cpu-crit { + temperature = <110000>; + hysteresis = <1000>; + type = "critical"; + }; + }; + + cooling-maps { + map0 { + trip = <&cpu0_alert0>; + cooling-device = <&CPU0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&CPU1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&CPU2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&CPU3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>; + }; + map1 { + trip = <&cpu0_alert1>; + cooling-device = <&CPU0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&CPU1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&CPU2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&CPU3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>; + }; + }; + }; + + cpu1-thermal { + polling-delay-passive = <250>; + polling-delay = <1000>; + + thermal-sensors = <&tsens0 2>; + + trips { + cpu1_alert0: trip-point0 { + temperature = <90000>; + hysteresis = <2000>; + type = "passive"; + }; + + cpu1_alert1: trip-point1 { + temperature = <95000>; + hysteresis = <2000>; + type = "passive"; + }; + + cpu1_crit: cpu-crit { + temperature = <110000>; + hysteresis = <1000>; + type = "critical"; + }; + }; + + cooling-maps { + map0 { + trip = <&cpu1_alert0>; + cooling-device = <&CPU0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&CPU1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&CPU2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&CPU3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>; + }; + map1 { + trip = <&cpu1_alert1>; + cooling-device = <&CPU0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&CPU1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&CPU2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&CPU3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>; + }; + }; + }; + + cpu2-thermal { + polling-delay-passive = <250>; + polling-delay = <1000>; + + thermal-sensors = <&tsens0 3>; + + trips { + cpu2_alert0: trip-point0 { + temperature = <90000>; + hysteresis = <2000>; + type = "passive"; + }; + + cpu2_alert1: trip-point1 { + temperature = <95000>; + hysteresis = <2000>; + type = "passive"; + }; + + cpu2_crit: cpu-crit { + temperature = <110000>; + hysteresis = <1000>; + type = "critical"; + }; + }; + + cooling-maps { + map0 { + trip = <&cpu2_alert0>; + cooling-device = <&CPU0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&CPU1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&CPU2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&CPU3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>; + }; + map1 { + trip = <&cpu2_alert1>; + cooling-device = <&CPU0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&CPU1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&CPU2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&CPU3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>; + }; + }; + }; + + cpu3-thermal { + polling-delay-passive = <250>; + polling-delay = <1000>; + + thermal-sensors = <&tsens0 4>; + + trips { + cpu3_alert0: trip-point0 { + temperature = <90000>; + hysteresis = <2000>; + type = "passive"; + }; + + cpu3_alert1: trip-point1 { + temperature = <95000>; + hysteresis = <2000>; + type = "passive"; + }; + + cpu3_crit: cpu-crit { + temperature = <110000>; + hysteresis = <1000>; + type = "critical"; + }; + }; + + cooling-maps { + map0 { + trip = <&cpu3_alert0>; + cooling-device = <&CPU0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&CPU1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&CPU2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&CPU3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>; + }; + map1 { + trip = <&cpu3_alert1>; + cooling-device = <&CPU0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&CPU1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&CPU2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&CPU3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>; + }; + }; + }; + + cpu4-top-thermal { + polling-delay-passive = <250>; + polling-delay = <1000>; + + thermal-sensors = <&tsens0 7>; + + trips { + cpu4_top_alert0: trip-point0 { + temperature = <90000>; + hysteresis = <2000>; + type = "passive"; + }; + + cpu4_top_alert1: trip-point1 { + temperature = <95000>; + hysteresis = <2000>; + type = "passive"; + }; + + cpu4_top_crit: cpu-crit { + temperature = <110000>; + hysteresis = <1000>; + type = "critical"; + }; + }; + + cooling-maps { + map0 { + trip = <&cpu4_top_alert0>; + cooling-device = <&CPU4 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&CPU5 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&CPU6 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&CPU7 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>; + }; + map1 { + trip = <&cpu4_top_alert1>; + cooling-device = <&CPU4 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&CPU5 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&CPU6 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&CPU7 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>; + }; + }; + }; + + cpu5-top-thermal { + polling-delay-passive = <250>; + polling-delay = <1000>; + + thermal-sensors = <&tsens0 8>; + + trips { + cpu5_top_alert0: trip-point0 { + temperature = <90000>; + hysteresis = <2000>; + type = "passive"; + }; + + cpu5_top_alert1: trip-point1 { + temperature = <95000>; + hysteresis = <2000>; + type = "passive"; + }; + + cpu5_top_crit: cpu-crit { + temperature = <110000>; + hysteresis = <1000>; + type = "critical"; + }; + }; + + cooling-maps { + map0 { + trip = <&cpu5_top_alert0>; + cooling-device = <&CPU4 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&CPU5 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&CPU6 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&CPU7 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>; + }; + map1 { + trip = <&cpu5_top_alert1>; + cooling-device = <&CPU4 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&CPU5 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&CPU6 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&CPU7 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>; + }; + }; + }; + + cpu6-top-thermal { + polling-delay-passive = <250>; + polling-delay = <1000>; + + thermal-sensors = <&tsens0 9>; + + trips { + cpu6_top_alert0: trip-point0 { + temperature = <90000>; + hysteresis = <2000>; + type = "passive"; + }; + + cpu6_top_alert1: trip-point1 { + temperature = <95000>; + hysteresis = <2000>; + type = "passive"; + }; + + cpu6_top_crit: cpu-crit { + temperature = <110000>; + hysteresis = <1000>; + type = "critical"; + }; + }; + + cooling-maps { + map0 { + trip = <&cpu6_top_alert0>; + cooling-device = <&CPU4 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&CPU5 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&CPU6 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&CPU7 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>; + }; + map1 { + trip = <&cpu6_top_alert1>; + cooling-device = <&CPU4 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&CPU5 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&CPU6 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&CPU7 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>; + }; + }; + }; + + cpu7-top-thermal { + polling-delay-passive = <250>; + polling-delay = <1000>; + + thermal-sensors = <&tsens0 10>; + + trips { + cpu7_top_alert0: trip-point0 { + temperature = <90000>; + hysteresis = <2000>; + type = "passive"; + }; + + cpu7_top_alert1: trip-point1 { + temperature = <95000>; + hysteresis = <2000>; + type = "passive"; + }; + + cpu7_top_crit: cpu-crit { + temperature = <110000>; + hysteresis = <1000>; + type = "critical"; + }; + }; + + cooling-maps { + map0 { + trip = <&cpu7_top_alert0>; + cooling-device = <&CPU4 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&CPU5 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&CPU6 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&CPU7 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>; + }; + map1 { + trip = <&cpu7_top_alert1>; + cooling-device = <&CPU4 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&CPU5 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&CPU6 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&CPU7 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>; + }; + }; + }; + + cpu4-bottom-thermal { + polling-delay-passive = <250>; + polling-delay = <1000>; + + thermal-sensors = <&tsens0 11>; + + trips { + cpu4_bottom_alert0: trip-point0 { + temperature = <90000>; + hysteresis = <2000>; + type = "passive"; + }; + + cpu4_bottom_alert1: trip-point1 { + temperature = <95000>; + hysteresis = <2000>; + type = "passive"; + }; + + cpu4_bottom_crit: cpu-crit { + temperature = <110000>; + hysteresis = <1000>; + type = "critical"; + }; + }; + + cooling-maps { + map0 { + trip = <&cpu4_bottom_alert0>; + cooling-device = <&CPU4 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&CPU5 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&CPU6 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&CPU7 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>; + }; + map1 { + trip = <&cpu4_bottom_alert1>; + cooling-device = <&CPU4 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&CPU5 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&CPU6 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&CPU7 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>; + }; + }; + }; + + cpu5-bottom-thermal { + polling-delay-passive = <250>; + polling-delay = <1000>; + + thermal-sensors = <&tsens0 12>; + + trips { + cpu5_bottom_alert0: trip-point0 { + temperature = <90000>; + hysteresis = <2000>; + type = "passive"; + }; + + cpu5_bottom_alert1: trip-point1 { + temperature = <95000>; + hysteresis = <2000>; + type = "passive"; + }; + + cpu5_bottom_crit: cpu-crit { + temperature = <110000>; + hysteresis = <1000>; + type = "critical"; + }; + }; + + cooling-maps { + map0 { + trip = <&cpu5_bottom_alert0>; + cooling-device = <&CPU4 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&CPU5 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&CPU6 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&CPU7 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>; + }; + map1 { + trip = <&cpu5_bottom_alert1>; + cooling-device = <&CPU4 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&CPU5 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&CPU6 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&CPU7 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>; + }; + }; + }; + + cpu6-bottom-thermal { + polling-delay-passive = <250>; + polling-delay = <1000>; + + thermal-sensors = <&tsens0 13>; + + trips { + cpu6_bottom_alert0: trip-point0 { + temperature = <90000>; + hysteresis = <2000>; + type = "passive"; + }; + + cpu6_bottom_alert1: trip-point1 { + temperature = <95000>; + hysteresis = <2000>; + type = "passive"; + }; + + cpu6_bottom_crit: cpu-crit { + temperature = <110000>; + hysteresis = <1000>; + type = "critical"; + }; + }; + + cooling-maps { + map0 { + trip = <&cpu6_bottom_alert0>; + cooling-device = <&CPU4 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&CPU5 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&CPU6 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&CPU7 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>; + }; + map1 { + trip = <&cpu6_bottom_alert1>; + cooling-device = <&CPU4 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&CPU5 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&CPU6 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&CPU7 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>; + }; + }; + }; + + cpu7-bottom-thermal { + polling-delay-passive = <250>; + polling-delay = <1000>; + + thermal-sensors = <&tsens0 14>; + + trips { + cpu7_bottom_alert0: trip-point0 { + temperature = <90000>; + hysteresis = <2000>; + type = "passive"; + }; + + cpu7_bottom_alert1: trip-point1 { + temperature = <95000>; + hysteresis = <2000>; + type = "passive"; + }; + + cpu7_bottom_crit: cpu-crit { + temperature = <110000>; + hysteresis = <1000>; + type = "critical"; + }; + }; + + cooling-maps { + map0 { + trip = <&cpu7_bottom_alert0>; + cooling-device = <&CPU4 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&CPU5 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&CPU6 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&CPU7 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>; + }; + map1 { + trip = <&cpu7_bottom_alert1>; + cooling-device = <&CPU4 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&CPU5 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&CPU6 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&CPU7 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>; + }; + }; + }; + + aoss0-thermal { + polling-delay-passive = <250>; + polling-delay = <1000>; + + thermal-sensors = <&tsens0 0>; + + trips { + aoss0_alert0: trip-point0 { + temperature = <90000>; + hysteresis = <2000>; + type = "hot"; + }; + }; + }; + + cluster0-thermal { + polling-delay-passive = <250>; + polling-delay = <1000>; + + thermal-sensors = <&tsens0 5>; + + trips { + cluster0_alert0: trip-point0 { + temperature = <90000>; + hysteresis = <2000>; + type = "hot"; + }; + cluster0_crit: cluster0_crit { + temperature = <110000>; + hysteresis = <2000>; + type = "critical"; + }; + }; + }; + + cluster1-thermal { + polling-delay-passive = <250>; + polling-delay = <1000>; + + thermal-sensors = <&tsens0 6>; + + trips { + cluster1_alert0: trip-point0 { + temperature = <90000>; + hysteresis = <2000>; + type = "hot"; + }; + cluster1_crit: cluster1_crit { + temperature = <110000>; + hysteresis = <2000>; + type = "critical"; + }; + }; + }; + + gpu-top-thermal { + polling-delay-passive = <250>; + polling-delay = <1000>; + + thermal-sensors = <&tsens0 15>; + + trips { + gpu1_alert0: trip-point0 { + temperature = <90000>; + hysteresis = <2000>; + type = "hot"; + }; + }; + }; + + aoss1-thermal { + polling-delay-passive = <250>; + polling-delay = <1000>; + + thermal-sensors = <&tsens1 0>; + + trips { + aoss1_alert0: trip-point0 { + temperature = <90000>; + hysteresis = <2000>; + type = "hot"; + }; + }; + }; + + wlan-thermal { + polling-delay-passive = <250>; + polling-delay = <1000>; + + thermal-sensors = <&tsens1 1>; + + trips { + wlan_alert0: trip-point0 { + temperature = <90000>; + hysteresis = <2000>; + type = "hot"; + }; + }; + }; + + video-thermal { + polling-delay-passive = <250>; + polling-delay = <1000>; + + thermal-sensors = <&tsens1 2>; + + trips { + video_alert0: trip-point0 { + temperature = <90000>; + hysteresis = <2000>; + type = "hot"; + }; + }; + }; + + mem-thermal { + polling-delay-passive = <250>; + polling-delay = <1000>; + + thermal-sensors = <&tsens1 3>; + + trips { + mem_alert0: trip-point0 { + temperature = <90000>; + hysteresis = <2000>; + type = "hot"; + }; + }; + }; + + q6-hvx-thermal { + polling-delay-passive = <250>; + polling-delay = <1000>; + + thermal-sensors = <&tsens1 4>; + + trips { + q6_hvx_alert0: trip-point0 { + temperature = <90000>; + hysteresis = <2000>; + type = "hot"; + }; + }; + }; + + camera-thermal { + polling-delay-passive = <250>; + polling-delay = <1000>; + + thermal-sensors = <&tsens1 5>; + + trips { + camera_alert0: trip-point0 { + temperature = <90000>; + hysteresis = <2000>; + type = "hot"; + }; + }; + }; + + compute-thermal { + polling-delay-passive = <250>; + polling-delay = <1000>; + + thermal-sensors = <&tsens1 6>; + + trips { + compute_alert0: trip-point0 { + temperature = <90000>; + hysteresis = <2000>; + type = "hot"; + }; + }; + }; + + modem-thermal { + polling-delay-passive = <250>; + polling-delay = <1000>; + + thermal-sensors = <&tsens1 7>; + + trips { + modem_alert0: trip-point0 { + temperature = <90000>; + hysteresis = <2000>; + type = "hot"; + }; + }; + }; + + npu-thermal { + polling-delay-passive = <250>; + polling-delay = <1000>; + + thermal-sensors = <&tsens1 8>; + + trips { + npu_alert0: trip-point0 { + temperature = <90000>; + hysteresis = <2000>; + type = "hot"; + }; + }; + }; + + modem-vec-thermal { + polling-delay-passive = <250>; + polling-delay = <1000>; + + thermal-sensors = <&tsens1 9>; + + trips { + modem_vec_alert0: trip-point0 { + temperature = <90000>; + hysteresis = <2000>; + type = "hot"; + }; + }; + }; + + modem-scl-thermal { + polling-delay-passive = <250>; + polling-delay = <1000>; + + thermal-sensors = <&tsens1 10>; + + trips { + modem_scl_alert0: trip-point0 { + temperature = <90000>; + hysteresis = <2000>; + type = "hot"; + }; + }; + }; + + gpu-bottom-thermal { + polling-delay-passive = <250>; + polling-delay = <1000>; + + thermal-sensors = <&tsens1 11>; + + trips { + gpu2_alert0: trip-point0 { + temperature = <90000>; + hysteresis = <2000>; + type = "hot"; + }; + }; + }; + }; +}; diff --git a/include/dt-bindings/clock/qcom,dispcc-sm8150.h b/include/dt-bindings/clock/qcom,dispcc-sm8150.h new file mode 100644 index 0000000000..767fdb27e5 --- /dev/null +++ b/include/dt-bindings/clock/qcom,dispcc-sm8150.h @@ -0,0 +1,76 @@ +/* SPDX-License-Identifier: GPL-2.0 */ +/* + * Copyright (c) 2018-2020, The Linux Foundation. All rights reserved. + */ + +#ifndef _DT_BINDINGS_CLK_QCOM_DISP_CC_SM8250_H +#define _DT_BINDINGS_CLK_QCOM_DISP_CC_SM8250_H + +/* DISP_CC clock registers */ +#define DISP_CC_MDSS_AHB_CLK 0 +#define DISP_CC_MDSS_AHB_CLK_SRC 1 +#define DISP_CC_MDSS_BYTE0_CLK 2 +#define DISP_CC_MDSS_BYTE0_CLK_SRC 3 +#define DISP_CC_MDSS_BYTE0_DIV_CLK_SRC 4 +#define DISP_CC_MDSS_BYTE0_INTF_CLK 5 +#define DISP_CC_MDSS_BYTE1_CLK 6 +#define DISP_CC_MDSS_BYTE1_CLK_SRC 7 +#define DISP_CC_MDSS_BYTE1_DIV_CLK_SRC 8 +#define DISP_CC_MDSS_BYTE1_INTF_CLK 9 +#define DISP_CC_MDSS_DP_AUX1_CLK 10 +#define DISP_CC_MDSS_DP_AUX1_CLK_SRC 11 +#define DISP_CC_MDSS_DP_AUX_CLK 12 +#define DISP_CC_MDSS_DP_AUX_CLK_SRC 13 +#define DISP_CC_MDSS_DP_LINK1_CLK 14 +#define DISP_CC_MDSS_DP_LINK1_CLK_SRC 15 +#define DISP_CC_MDSS_DP_LINK1_DIV_CLK_SRC 16 +#define DISP_CC_MDSS_DP_LINK1_INTF_CLK 17 +#define DISP_CC_MDSS_DP_LINK_CLK 18 +#define DISP_CC_MDSS_DP_LINK_CLK_SRC 19 +#define DISP_CC_MDSS_DP_LINK_DIV_CLK_SRC 20 +#define DISP_CC_MDSS_DP_LINK_INTF_CLK 21 +#define DISP_CC_MDSS_DP_PIXEL1_CLK 22 +#define DISP_CC_MDSS_DP_PIXEL1_CLK_SRC 23 +#define DISP_CC_MDSS_DP_PIXEL2_CLK 24 +#define DISP_CC_MDSS_DP_PIXEL2_CLK_SRC 25 +#define DISP_CC_MDSS_DP_PIXEL_CLK 26 +#define DISP_CC_MDSS_DP_PIXEL_CLK_SRC 27 +#define DISP_CC_MDSS_ESC0_CLK 28 +#define DISP_CC_MDSS_ESC0_CLK_SRC 29 +#define DISP_CC_MDSS_ESC1_CLK 30 +#define DISP_CC_MDSS_ESC1_CLK_SRC 31 +#define DISP_CC_MDSS_MDP_CLK 32 +#define DISP_CC_MDSS_MDP_CLK_SRC 33 +#define DISP_CC_MDSS_MDP_LUT_CLK 34 +#define DISP_CC_MDSS_NON_GDSC_AHB_CLK 35 +#define DISP_CC_MDSS_PCLK0_CLK 36 +#define DISP_CC_MDSS_PCLK0_CLK_SRC 37 +#define DISP_CC_MDSS_PCLK1_CLK 38 +#define DISP_CC_MDSS_PCLK1_CLK_SRC 39 +#define DISP_CC_MDSS_ROT_CLK 40 +#define DISP_CC_MDSS_ROT_CLK_SRC 41 +#define DISP_CC_MDSS_RSCC_AHB_CLK 42 +#define DISP_CC_MDSS_RSCC_VSYNC_CLK 43 +#define DISP_CC_MDSS_VSYNC_CLK 44 +#define DISP_CC_MDSS_VSYNC_CLK_SRC 45 +#define DISP_CC_PLL0 46 +#define DISP_CC_PLL1 47 +#define DISP_CC_MDSS_EDP_AUX_CLK 48 +#define DISP_CC_MDSS_EDP_AUX_CLK_SRC 49 +#define DISP_CC_MDSS_EDP_GTC_CLK 50 +#define DISP_CC_MDSS_EDP_GTC_CLK_SRC 51 +#define DISP_CC_MDSS_EDP_LINK_CLK 52 +#define DISP_CC_MDSS_EDP_LINK_CLK_SRC 53 +#define DISP_CC_MDSS_EDP_LINK_INTF_CLK 54 +#define DISP_CC_MDSS_EDP_PIXEL_CLK 55 +#define DISP_CC_MDSS_EDP_PIXEL_CLK_SRC 56 +#define DISP_CC_MDSS_EDP_LINK_DIV_CLK_SRC 57 + +/* DISP_CC Reset */ +#define DISP_CC_MDSS_CORE_BCR 0 +#define DISP_CC_MDSS_RSCC_BCR 1 + +/* DISP_CC GDSCR */ +#define MDSS_GDSC 0 + +#endif diff --git a/include/dt-bindings/clock/qcom,gcc-sm8150.h b/include/dt-bindings/clock/qcom,gcc-sm8150.h new file mode 100644 index 0000000000..dfefd5e8bf --- /dev/null +++ b/include/dt-bindings/clock/qcom,gcc-sm8150.h @@ -0,0 +1,252 @@ +/* SPDX-License-Identifier: GPL-2.0 */ +/* + * Copyright (c) 2019, The Linux Foundation. All rights reserved. + */ + +#ifndef _DT_BINDINGS_CLK_QCOM_GCC_SM8150_H +#define _DT_BINDINGS_CLK_QCOM_GCC_SM8150_H + +/* GCC clocks */ +#define GCC_AGGRE_NOC_PCIE_TBU_CLK 0 +#define GCC_AGGRE_UFS_CARD_AXI_CLK 1 +#define GCC_AGGRE_UFS_CARD_AXI_HW_CTL_CLK 2 +#define GCC_AGGRE_UFS_PHY_AXI_CLK 3 +#define GCC_AGGRE_UFS_PHY_AXI_HW_CTL_CLK 4 +#define GCC_AGGRE_USB3_PRIM_AXI_CLK 5 +#define GCC_AGGRE_USB3_SEC_AXI_CLK 6 +#define GCC_BOOT_ROM_AHB_CLK 7 +#define GCC_CAMERA_AHB_CLK 8 +#define GCC_CAMERA_HF_AXI_CLK 9 +#define GCC_CAMERA_SF_AXI_CLK 10 +#define GCC_CAMERA_XO_CLK 11 +#define GCC_CFG_NOC_USB3_PRIM_AXI_CLK 12 +#define GCC_CFG_NOC_USB3_SEC_AXI_CLK 13 +#define GCC_CPUSS_AHB_CLK 14 +#define GCC_CPUSS_AHB_CLK_SRC 15 +#define GCC_CPUSS_DVM_BUS_CLK 16 +#define GCC_CPUSS_GNOC_CLK 17 +#define GCC_CPUSS_RBCPR_CLK 18 +#define GCC_DDRSS_GPU_AXI_CLK 19 +#define GCC_DISP_AHB_CLK 20 +#define GCC_DISP_HF_AXI_CLK 21 +#define GCC_DISP_SF_AXI_CLK 22 +#define GCC_DISP_XO_CLK 23 +#define GCC_EMAC_AXI_CLK 24 +#define GCC_EMAC_PTP_CLK 25 +#define GCC_EMAC_PTP_CLK_SRC 26 +#define GCC_EMAC_RGMII_CLK 27 +#define GCC_EMAC_RGMII_CLK_SRC 28 +#define GCC_EMAC_SLV_AHB_CLK 29 +#define GCC_GP1_CLK 30 +#define GCC_GP1_CLK_SRC 31 +#define GCC_GP2_CLK 32 +#define GCC_GP2_CLK_SRC 33 +#define GCC_GP3_CLK 34 +#define GCC_GP3_CLK_SRC 35 +#define GCC_GPU_CFG_AHB_CLK 36 +#define GCC_GPU_GPLL0_CLK_SRC 37 +#define GCC_GPU_GPLL0_DIV_CLK_SRC 38 +#define GCC_GPU_IREF_CLK 39 +#define GCC_GPU_MEMNOC_GFX_CLK 40 +#define GCC_GPU_SNOC_DVM_GFX_CLK 41 +#define GCC_NPU_AT_CLK 42 +#define GCC_NPU_AXI_CLK 43 +#define GCC_NPU_CFG_AHB_CLK 44 +#define GCC_NPU_GPLL0_CLK_SRC 45 +#define GCC_NPU_GPLL0_DIV_CLK_SRC 46 +#define GCC_NPU_TRIG_CLK 47 +#define GCC_PCIE0_PHY_REFGEN_CLK 48 +#define GCC_PCIE1_PHY_REFGEN_CLK 49 +#define GCC_PCIE_0_AUX_CLK 50 +#define GCC_PCIE_0_AUX_CLK_SRC 51 +#define GCC_PCIE_0_CFG_AHB_CLK 52 +#define GCC_PCIE_0_CLKREF_CLK 53 +#define GCC_PCIE_0_MSTR_AXI_CLK 54 +#define GCC_PCIE_0_PIPE_CLK 55 +#define GCC_PCIE_0_SLV_AXI_CLK 56 +#define GCC_PCIE_0_SLV_Q2A_AXI_CLK 57 +#define GCC_PCIE_1_AUX_CLK 58 +#define GCC_PCIE_1_AUX_CLK_SRC 59 +#define GCC_PCIE_1_CFG_AHB_CLK 60 +#define GCC_PCIE_1_CLKREF_CLK 61 +#define GCC_PCIE_1_MSTR_AXI_CLK 62 +#define GCC_PCIE_1_PIPE_CLK 63 +#define GCC_PCIE_1_SLV_AXI_CLK 64 +#define GCC_PCIE_1_SLV_Q2A_AXI_CLK 65 +#define GCC_PCIE_PHY_AUX_CLK 66 +#define GCC_PCIE_PHY_REFGEN_CLK_SRC 67 +#define GCC_PDM2_CLK 68 +#define GCC_PDM2_CLK_SRC 69 +#define GCC_PDM_AHB_CLK 70 +#define GCC_PDM_XO4_CLK 71 +#define GCC_PRNG_AHB_CLK 72 +#define GCC_QMIP_CAMERA_NRT_AHB_CLK 73 +#define GCC_QMIP_CAMERA_RT_AHB_CLK 74 +#define GCC_QMIP_DISP_AHB_CLK 75 +#define GCC_QMIP_VIDEO_CVP_AHB_CLK 76 +#define GCC_QMIP_VIDEO_VCODEC_AHB_CLK 77 +#define GCC_QSPI_CNOC_PERIPH_AHB_CLK 78 +#define GCC_QSPI_CORE_CLK 79 +#define GCC_QSPI_CORE_CLK_SRC 80 +#define GCC_QUPV3_WRAP0_S0_CLK 81 +#define GCC_QUPV3_WRAP0_S0_CLK_SRC 82 +#define GCC_QUPV3_WRAP0_S1_CLK 83 +#define GCC_QUPV3_WRAP0_S1_CLK_SRC 84 +#define GCC_QUPV3_WRAP0_S2_CLK 85 +#define GCC_QUPV3_WRAP0_S2_CLK_SRC 86 +#define GCC_QUPV3_WRAP0_S3_CLK 87 +#define GCC_QUPV3_WRAP0_S3_CLK_SRC 88 +#define GCC_QUPV3_WRAP0_S4_CLK 89 +#define GCC_QUPV3_WRAP0_S4_CLK_SRC 90 +#define GCC_QUPV3_WRAP0_S5_CLK 91 +#define GCC_QUPV3_WRAP0_S5_CLK_SRC 92 +#define GCC_QUPV3_WRAP0_S6_CLK 93 +#define GCC_QUPV3_WRAP0_S6_CLK_SRC 94 +#define GCC_QUPV3_WRAP0_S7_CLK 95 +#define GCC_QUPV3_WRAP0_S7_CLK_SRC 96 +#define GCC_QUPV3_WRAP1_S0_CLK 97 +#define GCC_QUPV3_WRAP1_S0_CLK_SRC 98 +#define GCC_QUPV3_WRAP1_S1_CLK 99 +#define GCC_QUPV3_WRAP1_S1_CLK_SRC 100 +#define GCC_QUPV3_WRAP1_S2_CLK 101 +#define GCC_QUPV3_WRAP1_S2_CLK_SRC 102 +#define GCC_QUPV3_WRAP1_S3_CLK 103 +#define GCC_QUPV3_WRAP1_S3_CLK_SRC 104 +#define GCC_QUPV3_WRAP1_S4_CLK 105 +#define GCC_QUPV3_WRAP1_S4_CLK_SRC 106 +#define GCC_QUPV3_WRAP1_S5_CLK 107 +#define GCC_QUPV3_WRAP1_S5_CLK_SRC 108 +#define GCC_QUPV3_WRAP2_S0_CLK 109 +#define GCC_QUPV3_WRAP2_S0_CLK_SRC 110 +#define GCC_QUPV3_WRAP2_S1_CLK 111 +#define GCC_QUPV3_WRAP2_S1_CLK_SRC 112 +#define GCC_QUPV3_WRAP2_S2_CLK 113 +#define GCC_QUPV3_WRAP2_S2_CLK_SRC 114 +#define GCC_QUPV3_WRAP2_S3_CLK 115 +#define GCC_QUPV3_WRAP2_S3_CLK_SRC 116 +#define GCC_QUPV3_WRAP2_S4_CLK 117 +#define GCC_QUPV3_WRAP2_S4_CLK_SRC 118 +#define GCC_QUPV3_WRAP2_S5_CLK 119 +#define GCC_QUPV3_WRAP2_S5_CLK_SRC 120 +#define GCC_QUPV3_WRAP_0_M_AHB_CLK 121 +#define GCC_QUPV3_WRAP_0_S_AHB_CLK 122 +#define GCC_QUPV3_WRAP_1_M_AHB_CLK 123 +#define GCC_QUPV3_WRAP_1_S_AHB_CLK 124 +#define GCC_QUPV3_WRAP_2_M_AHB_CLK 125 +#define GCC_QUPV3_WRAP_2_S_AHB_CLK 126 +#define GCC_SDCC2_AHB_CLK 127 +#define GCC_SDCC2_APPS_CLK 128 +#define GCC_SDCC2_APPS_CLK_SRC 129 +#define GCC_SDCC4_AHB_CLK 130 +#define GCC_SDCC4_APPS_CLK 131 +#define GCC_SDCC4_APPS_CLK_SRC 132 +#define GCC_SYS_NOC_CPUSS_AHB_CLK 133 +#define GCC_TSIF_AHB_CLK 134 +#define GCC_TSIF_INACTIVITY_TIMERS_CLK 135 +#define GCC_TSIF_REF_CLK 136 +#define GCC_TSIF_REF_CLK_SRC 137 +#define GCC_UFS_CARD_AHB_CLK 138 +#define GCC_UFS_CARD_AXI_CLK 139 +#define GCC_UFS_CARD_AXI_CLK_SRC 140 +#define GCC_UFS_CARD_AXI_HW_CTL_CLK 141 +#define GCC_UFS_CARD_CLKREF_CLK 142 +#define GCC_UFS_CARD_ICE_CORE_CLK 143 +#define GCC_UFS_CARD_ICE_CORE_CLK_SRC 144 +#define GCC_UFS_CARD_ICE_CORE_HW_CTL_CLK 145 +#define GCC_UFS_CARD_PHY_AUX_CLK 146 +#define GCC_UFS_CARD_PHY_AUX_CLK_SRC 147 +#define GCC_UFS_CARD_PHY_AUX_HW_CTL_CLK 148 +#define GCC_UFS_CARD_RX_SYMBOL_0_CLK 149 +#define GCC_UFS_CARD_RX_SYMBOL_1_CLK 150 +#define GCC_UFS_CARD_TX_SYMBOL_0_CLK 151 +#define GCC_UFS_CARD_UNIPRO_CORE_CLK 152 +#define GCC_UFS_CARD_UNIPRO_CORE_CLK_SRC 153 +#define GCC_UFS_CARD_UNIPRO_CORE_HW_CTL_CLK 154 +#define GCC_UFS_MEM_CLKREF_CLK 155 +#define GCC_UFS_PHY_AHB_CLK 156 +#define GCC_UFS_PHY_AXI_CLK 157 +#define GCC_UFS_PHY_AXI_CLK_SRC 158 +#define GCC_UFS_PHY_AXI_HW_CTL_CLK 159 +#define GCC_UFS_PHY_ICE_CORE_CLK 160 +#define GCC_UFS_PHY_ICE_CORE_CLK_SRC 161 +#define GCC_UFS_PHY_ICE_CORE_HW_CTL_CLK 162 +#define GCC_UFS_PHY_PHY_AUX_CLK 163 +#define GCC_UFS_PHY_PHY_AUX_CLK_SRC 164 +#define GCC_UFS_PHY_PHY_AUX_HW_CTL_CLK 165 +#define GCC_UFS_PHY_RX_SYMBOL_0_CLK 166 +#define GCC_UFS_PHY_RX_SYMBOL_1_CLK 167 +#define GCC_UFS_PHY_TX_SYMBOL_0_CLK 168 +#define GCC_UFS_PHY_UNIPRO_CORE_CLK 169 +#define GCC_UFS_PHY_UNIPRO_CORE_CLK_SRC 170 +#define GCC_UFS_PHY_UNIPRO_CORE_HW_CTL_CLK 171 +#define GCC_USB30_PRIM_MASTER_CLK 172 +#define GCC_USB30_PRIM_MASTER_CLK_SRC 173 +#define GCC_USB30_PRIM_MOCK_UTMI_CLK 174 +#define GCC_USB30_PRIM_MOCK_UTMI_CLK_SRC 175 +#define GCC_USB30_PRIM_SLEEP_CLK 176 +#define GCC_USB30_SEC_MASTER_CLK 177 +#define GCC_USB30_SEC_MASTER_CLK_SRC 178 +#define GCC_USB30_SEC_MOCK_UTMI_CLK 179 +#define GCC_USB30_SEC_MOCK_UTMI_CLK_SRC 180 +#define GCC_USB30_SEC_SLEEP_CLK 181 +#define GCC_USB3_PRIM_CLKREF_CLK 182 +#define GCC_USB3_PRIM_PHY_AUX_CLK 183 +#define GCC_USB3_PRIM_PHY_AUX_CLK_SRC 184 +#define GCC_USB3_PRIM_PHY_COM_AUX_CLK 185 +#define GCC_USB3_PRIM_PHY_PIPE_CLK 186 +#define GCC_USB3_SEC_CLKREF_CLK 187 +#define GCC_USB3_SEC_PHY_AUX_CLK 188 +#define GCC_USB3_SEC_PHY_AUX_CLK_SRC 189 +#define GCC_USB3_SEC_PHY_COM_AUX_CLK 190 +#define GCC_USB3_SEC_PHY_PIPE_CLK 191 +#define GCC_VIDEO_AHB_CLK 192 +#define GCC_VIDEO_AXI0_CLK 193 +#define GCC_VIDEO_AXI1_CLK 194 +#define GCC_VIDEO_AXIC_CLK 195 +#define GCC_VIDEO_XO_CLK 196 +#define GPLL0 197 +#define GPLL0_OUT_EVEN 198 +#define GPLL7 199 +#define GPLL9 200 + +/* Reset clocks */ +#define GCC_EMAC_BCR 0 +#define GCC_GPU_BCR 1 +#define GCC_MMSS_BCR 2 +#define GCC_NPU_BCR 3 +#define GCC_PCIE_0_BCR 4 +#define GCC_PCIE_0_PHY_BCR 5 +#define GCC_PCIE_1_BCR 6 +#define GCC_PCIE_1_PHY_BCR 7 +#define GCC_PCIE_PHY_BCR 8 +#define GCC_PDM_BCR 9 +#define GCC_PRNG_BCR 10 +#define GCC_QSPI_BCR 11 +#define GCC_QUPV3_WRAPPER_0_BCR 12 +#define GCC_QUPV3_WRAPPER_1_BCR 13 +#define GCC_QUPV3_WRAPPER_2_BCR 14 +#define GCC_QUSB2PHY_PRIM_BCR 15 +#define GCC_QUSB2PHY_SEC_BCR 16 +#define GCC_USB3_PHY_PRIM_BCR 17 +#define GCC_USB3_DP_PHY_PRIM_BCR 18 +#define GCC_USB3_PHY_SEC_BCR 19 +#define GCC_USB3PHY_PHY_SEC_BCR 20 +#define GCC_SDCC2_BCR 21 +#define GCC_SDCC4_BCR 22 +#define GCC_TSIF_BCR 23 +#define GCC_UFS_CARD_BCR 24 +#define GCC_UFS_PHY_BCR 25 +#define GCC_USB30_PRIM_BCR 26 +#define GCC_USB30_SEC_BCR 27 +#define GCC_USB_PHY_CFG_AHB2PHY_BCR 28 + +/* GCC GDSCRs */ +#define PCIE_0_GDSC 0 +#define PCIE_1_GDSC 1 +#define UFS_CARD_GDSC 2 +#define UFS_PHY_GDSC 3 +#define USB30_PRIM_GDSC 4 +#define USB30_SEC_GDSC 5 +#define EMAC_GDSC 6 + +#endif diff --git a/include/dt-bindings/clock/qcom,gpucc-sm8150.h b/include/dt-bindings/clock/qcom,gpucc-sm8150.h new file mode 100644 index 0000000000..c5b70aad77 --- /dev/null +++ b/include/dt-bindings/clock/qcom,gpucc-sm8150.h @@ -0,0 +1,33 @@ +/* SPDX-License-Identifier: GPL-2.0 */ +/* + * Copyright (c) 2017-2020, The Linux Foundation. All rights reserved. + */ + +#ifndef _DT_BINDINGS_CLK_QCOM_GPU_CC_SM8150_H +#define _DT_BINDINGS_CLK_QCOM_GPU_CC_SM8150_H + +/* GPU_CC clock registers */ +#define GPU_CC_AHB_CLK 0 +#define GPU_CC_CRC_AHB_CLK 1 +#define GPU_CC_CX_APB_CLK 2 +#define GPU_CC_CX_GMU_CLK 3 +#define GPU_CC_CX_SNOC_DVM_CLK 4 +#define GPU_CC_CXO_AON_CLK 5 +#define GPU_CC_CXO_CLK 6 +#define GPU_CC_GMU_CLK_SRC 7 +#define GPU_CC_GX_GMU_CLK 8 +#define GPU_CC_PLL1 9 + +/* GPU_CC Resets */ +#define GPUCC_GPU_CC_CX_BCR 0 +#define GPUCC_GPU_CC_GFX3D_AON_BCR 1 +#define GPUCC_GPU_CC_GMU_BCR 2 +#define GPUCC_GPU_CC_GX_BCR 3 +#define GPUCC_GPU_CC_SPDM_BCR 4 +#define GPUCC_GPU_CC_XO_BCR 5 + +/* GPU_CC GDSCRs */ +#define GPU_CX_GDSC 0 +#define GPU_GX_GDSC 1 + +#endif diff --git a/include/dt-bindings/clock/qcom,rpmh.h b/include/dt-bindings/clock/qcom,rpmh.h new file mode 100644 index 0000000000..0a7d1be0d1 --- /dev/null +++ b/include/dt-bindings/clock/qcom,rpmh.h @@ -0,0 +1,37 @@ +/* SPDX-License-Identifier: GPL-2.0 */ +/* Copyright (c) 2018, 2020, The Linux Foundation. All rights reserved. */ + + +#ifndef _DT_BINDINGS_CLK_MSM_RPMH_H +#define _DT_BINDINGS_CLK_MSM_RPMH_H + +/* RPMh controlled clocks */ +#define RPMH_CXO_CLK 0 +#define RPMH_CXO_CLK_A 1 +#define RPMH_LN_BB_CLK2 2 +#define RPMH_LN_BB_CLK2_A 3 +#define RPMH_LN_BB_CLK3 4 +#define RPMH_LN_BB_CLK3_A 5 +#define RPMH_RF_CLK1 6 +#define RPMH_RF_CLK1_A 7 +#define RPMH_RF_CLK2 8 +#define RPMH_RF_CLK2_A 9 +#define RPMH_RF_CLK3 10 +#define RPMH_RF_CLK3_A 11 +#define RPMH_IPA_CLK 12 +#define RPMH_LN_BB_CLK1 13 +#define RPMH_LN_BB_CLK1_A 14 +#define RPMH_CE_CLK 15 +#define RPMH_QPIC_CLK 16 +#define RPMH_DIV_CLK1 17 +#define RPMH_DIV_CLK1_A 18 +#define RPMH_RF_CLK4 19 +#define RPMH_RF_CLK4_A 20 +#define RPMH_RF_CLK5 21 +#define RPMH_RF_CLK5_A 22 +#define RPMH_PKA_CLK 23 +#define RPMH_HWKM_CLK 24 +#define RPMH_QLINK_CLK 25 +#define RPMH_QLINK_CLK_A 26 + +#endif diff --git a/include/dt-bindings/dma/qcom-gpi.h b/include/dt-bindings/dma/qcom-gpi.h new file mode 100644 index 0000000000..ebda2a37f5 --- /dev/null +++ b/include/dt-bindings/dma/qcom-gpi.h @@ -0,0 +1,11 @@ +/* SPDX-License-Identifier: GPL-2.0 OR BSD-2-Clause */ +/* Copyright (c) 2020, Linaro Ltd. */ + +#ifndef __DT_BINDINGS_DMA_QCOM_GPI_H__ +#define __DT_BINDINGS_DMA_QCOM_GPI_H__ + +#define QCOM_GPI_SPI 1 +#define QCOM_GPI_UART 2 +#define QCOM_GPI_I2C 3 + +#endif /* __DT_BINDINGS_DMA_QCOM_GPI_H__ */ diff --git a/include/dt-bindings/firmware/qcom,scm.h b/include/dt-bindings/firmware/qcom,scm.h new file mode 100644 index 0000000000..6de8b08e1e --- /dev/null +++ b/include/dt-bindings/firmware/qcom,scm.h @@ -0,0 +1,39 @@ +/* SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause */ +/* + * Copyright (c) 2010-2015, 2018-2019 The Linux Foundation. All rights reserved. + * Copyright (C) 2015 Linaro Ltd. + * Copyright (c) 2023 Qualcomm Innovation Center, Inc. All rights reserved. + */ + +#ifndef _DT_BINDINGS_FIRMWARE_QCOM_SCM_H +#define _DT_BINDINGS_FIRMWARE_QCOM_SCM_H + +#define QCOM_SCM_VMID_TZ 0x1 +#define QCOM_SCM_VMID_HLOS 0x3 +#define QCOM_SCM_VMID_SSC_Q6 0x5 +#define QCOM_SCM_VMID_ADSP_Q6 0x6 +#define QCOM_SCM_VMID_CP_TOUCH 0x8 +#define QCOM_SCM_VMID_CP_BITSTREAM 0x9 +#define QCOM_SCM_VMID_CP_PIXEL 0xA +#define QCOM_SCM_VMID_CP_NON_PIXEL 0xB +#define QCOM_SCM_VMID_CP_CAMERA 0xD +#define QCOM_SCM_VMID_HLOS_FREE 0xE +#define QCOM_SCM_VMID_MSS_MSA 0xF +#define QCOM_SCM_VMID_MSS_NONMSA 0x10 +#define QCOM_SCM_VMID_CP_SEC_DISPLAY 0x11 +#define QCOM_SCM_VMID_CP_APP 0x12 +#define QCOM_SCM_VMID_LPASS 0x16 +#define QCOM_SCM_VMID_WLAN 0x18 +#define QCOM_SCM_VMID_WLAN_CE 0x19 +#define QCOM_SCM_VMID_CP_SPSS_SP 0x1A +#define QCOM_SCM_VMID_CP_CAMERA_PREVIEW 0x1D +#define QCOM_SCM_VMID_CDSP 0x1E +#define QCOM_SCM_VMID_CP_SPSS_SP_SHARED 0x22 +#define QCOM_SCM_VMID_CP_SPSS_HLOS_SHARED 0x24 +#define QCOM_SCM_VMID_ADSP_HEAP 0x25 +#define QCOM_SCM_VMID_CP_CDSP 0x2A +#define QCOM_SCM_VMID_NAV 0x2B +#define QCOM_SCM_VMID_TVM 0x2D +#define QCOM_SCM_VMID_OEMVM 0x31 + +#endif diff --git a/include/dt-bindings/iio/qcom,spmi-vadc.h b/include/dt-bindings/iio/qcom,spmi-vadc.h new file mode 100644 index 0000000000..ef07ecd4d5 --- /dev/null +++ b/include/dt-bindings/iio/qcom,spmi-vadc.h @@ -0,0 +1,303 @@ +/* SPDX-License-Identifier: GPL-2.0 */ +/* + * Copyright (c) 2012-2014,2018,2020 The Linux Foundation. All rights reserved. + */ + +#ifndef _DT_BINDINGS_QCOM_SPMI_VADC_H +#define _DT_BINDINGS_QCOM_SPMI_VADC_H + +/* Voltage ADC channels */ +#define VADC_USBIN 0x00 +#define VADC_DCIN 0x01 +#define VADC_VCHG_SNS 0x02 +#define VADC_SPARE1_03 0x03 +#define VADC_USB_ID_MV 0x04 +#define VADC_VCOIN 0x05 +#define VADC_VBAT_SNS 0x06 +#define VADC_VSYS 0x07 +#define VADC_DIE_TEMP 0x08 +#define VADC_REF_625MV 0x09 +#define VADC_REF_1250MV 0x0a +#define VADC_CHG_TEMP 0x0b +#define VADC_SPARE1 0x0c +#define VADC_SPARE2 0x0d +#define VADC_GND_REF 0x0e +#define VADC_VDD_VADC 0x0f + +#define VADC_P_MUX1_1_1 0x10 +#define VADC_P_MUX2_1_1 0x11 +#define VADC_P_MUX3_1_1 0x12 +#define VADC_P_MUX4_1_1 0x13 +#define VADC_P_MUX5_1_1 0x14 +#define VADC_P_MUX6_1_1 0x15 +#define VADC_P_MUX7_1_1 0x16 +#define VADC_P_MUX8_1_1 0x17 +#define VADC_P_MUX9_1_1 0x18 +#define VADC_P_MUX10_1_1 0x19 +#define VADC_P_MUX11_1_1 0x1a +#define VADC_P_MUX12_1_1 0x1b +#define VADC_P_MUX13_1_1 0x1c +#define VADC_P_MUX14_1_1 0x1d +#define VADC_P_MUX15_1_1 0x1e +#define VADC_P_MUX16_1_1 0x1f + +#define VADC_P_MUX1_1_3 0x20 +#define VADC_P_MUX2_1_3 0x21 +#define VADC_P_MUX3_1_3 0x22 +#define VADC_P_MUX4_1_3 0x23 +#define VADC_P_MUX5_1_3 0x24 +#define VADC_P_MUX6_1_3 0x25 +#define VADC_P_MUX7_1_3 0x26 +#define VADC_P_MUX8_1_3 0x27 +#define VADC_P_MUX9_1_3 0x28 +#define VADC_P_MUX10_1_3 0x29 +#define VADC_P_MUX11_1_3 0x2a +#define VADC_P_MUX12_1_3 0x2b +#define VADC_P_MUX13_1_3 0x2c +#define VADC_P_MUX14_1_3 0x2d +#define VADC_P_MUX15_1_3 0x2e +#define VADC_P_MUX16_1_3 0x2f + +#define VADC_LR_MUX1_BAT_THERM 0x30 +#define VADC_LR_MUX2_BAT_ID 0x31 +#define VADC_LR_MUX3_XO_THERM 0x32 +#define VADC_LR_MUX4_AMUX_THM1 0x33 +#define VADC_LR_MUX5_AMUX_THM2 0x34 +#define VADC_LR_MUX6_AMUX_THM3 0x35 +#define VADC_LR_MUX7_HW_ID 0x36 +#define VADC_LR_MUX8_AMUX_THM4 0x37 +#define VADC_LR_MUX9_AMUX_THM5 0x38 +#define VADC_LR_MUX10_USB_ID 0x39 +#define VADC_AMUX_PU1 0x3a +#define VADC_AMUX_PU2 0x3b +#define VADC_LR_MUX3_BUF_XO_THERM 0x3c + +#define VADC_LR_MUX1_PU1_BAT_THERM 0x70 +#define VADC_LR_MUX2_PU1_BAT_ID 0x71 +#define VADC_LR_MUX3_PU1_XO_THERM 0x72 +#define VADC_LR_MUX4_PU1_AMUX_THM1 0x73 +#define VADC_LR_MUX5_PU1_AMUX_THM2 0x74 +#define VADC_LR_MUX6_PU1_AMUX_THM3 0x75 +#define VADC_LR_MUX7_PU1_AMUX_HW_ID 0x76 +#define VADC_LR_MUX8_PU1_AMUX_THM4 0x77 +#define VADC_LR_MUX9_PU1_AMUX_THM5 0x78 +#define VADC_LR_MUX10_PU1_AMUX_USB_ID 0x79 +#define VADC_LR_MUX3_BUF_PU1_XO_THERM 0x7c + +#define VADC_LR_MUX1_PU2_BAT_THERM 0xb0 +#define VADC_LR_MUX2_PU2_BAT_ID 0xb1 +#define VADC_LR_MUX3_PU2_XO_THERM 0xb2 +#define VADC_LR_MUX4_PU2_AMUX_THM1 0xb3 +#define VADC_LR_MUX5_PU2_AMUX_THM2 0xb4 +#define VADC_LR_MUX6_PU2_AMUX_THM3 0xb5 +#define VADC_LR_MUX7_PU2_AMUX_HW_ID 0xb6 +#define VADC_LR_MUX8_PU2_AMUX_THM4 0xb7 +#define VADC_LR_MUX9_PU2_AMUX_THM5 0xb8 +#define VADC_LR_MUX10_PU2_AMUX_USB_ID 0xb9 +#define VADC_LR_MUX3_BUF_PU2_XO_THERM 0xbc + +#define VADC_LR_MUX1_PU1_PU2_BAT_THERM 0xf0 +#define VADC_LR_MUX2_PU1_PU2_BAT_ID 0xf1 +#define VADC_LR_MUX3_PU1_PU2_XO_THERM 0xf2 +#define VADC_LR_MUX4_PU1_PU2_AMUX_THM1 0xf3 +#define VADC_LR_MUX5_PU1_PU2_AMUX_THM2 0xf4 +#define VADC_LR_MUX6_PU1_PU2_AMUX_THM3 0xf5 +#define VADC_LR_MUX7_PU1_PU2_AMUX_HW_ID 0xf6 +#define VADC_LR_MUX8_PU1_PU2_AMUX_THM4 0xf7 +#define VADC_LR_MUX9_PU1_PU2_AMUX_THM5 0xf8 +#define VADC_LR_MUX10_PU1_PU2_AMUX_USB_ID 0xf9 +#define VADC_LR_MUX3_BUF_PU1_PU2_XO_THERM 0xfc + +/* ADC channels for SPMI PMIC5 */ + +#define ADC5_REF_GND 0x00 +#define ADC5_1P25VREF 0x01 +#define ADC5_VREF_VADC 0x02 +#define ADC5_VREF_VADC5_DIV_3 0x82 +#define ADC5_VPH_PWR 0x83 +#define ADC5_VBAT_SNS 0x84 +#define ADC5_VCOIN 0x85 +#define ADC5_DIE_TEMP 0x06 +#define ADC5_USB_IN_I 0x07 +#define ADC5_USB_IN_V_16 0x08 +#define ADC5_CHG_TEMP 0x09 +#define ADC5_BAT_THERM 0x0a +#define ADC5_BAT_ID 0x0b +#define ADC5_XO_THERM 0x0c +#define ADC5_AMUX_THM1 0x0d +#define ADC5_AMUX_THM2 0x0e +#define ADC5_AMUX_THM3 0x0f +#define ADC5_AMUX_THM4 0x10 +#define ADC5_AMUX_THM5 0x11 +#define ADC5_GPIO1 0x12 +#define ADC5_GPIO2 0x13 +#define ADC5_GPIO3 0x14 +#define ADC5_GPIO4 0x15 +#define ADC5_GPIO5 0x16 +#define ADC5_GPIO6 0x17 +#define ADC5_GPIO7 0x18 +#define ADC5_SBUx 0x99 +#define ADC5_MID_CHG_DIV6 0x1e +#define ADC5_OFF 0xff + +/* 30k pull-up1 */ +#define ADC5_BAT_THERM_30K_PU 0x2a +#define ADC5_BAT_ID_30K_PU 0x2b +#define ADC5_XO_THERM_30K_PU 0x2c +#define ADC5_AMUX_THM1_30K_PU 0x2d +#define ADC5_AMUX_THM2_30K_PU 0x2e +#define ADC5_AMUX_THM3_30K_PU 0x2f +#define ADC5_AMUX_THM4_30K_PU 0x30 +#define ADC5_AMUX_THM5_30K_PU 0x31 +#define ADC5_GPIO1_30K_PU 0x32 +#define ADC5_GPIO2_30K_PU 0x33 +#define ADC5_GPIO3_30K_PU 0x34 +#define ADC5_GPIO4_30K_PU 0x35 +#define ADC5_GPIO5_30K_PU 0x36 +#define ADC5_GPIO6_30K_PU 0x37 +#define ADC5_GPIO7_30K_PU 0x38 +#define ADC5_SBUx_30K_PU 0x39 + +/* 100k pull-up2 */ +#define ADC5_BAT_THERM_100K_PU 0x4a +#define ADC5_BAT_ID_100K_PU 0x4b +#define ADC5_XO_THERM_100K_PU 0x4c +#define ADC5_AMUX_THM1_100K_PU 0x4d +#define ADC5_AMUX_THM2_100K_PU 0x4e +#define ADC5_AMUX_THM3_100K_PU 0x4f +#define ADC5_AMUX_THM4_100K_PU 0x50 +#define ADC5_AMUX_THM5_100K_PU 0x51 +#define ADC5_GPIO1_100K_PU 0x52 +#define ADC5_GPIO2_100K_PU 0x53 +#define ADC5_GPIO3_100K_PU 0x54 +#define ADC5_GPIO4_100K_PU 0x55 +#define ADC5_GPIO5_100K_PU 0x56 +#define ADC5_GPIO6_100K_PU 0x57 +#define ADC5_GPIO7_100K_PU 0x58 +#define ADC5_SBUx_100K_PU 0x59 + +/* 400k pull-up3 */ +#define ADC5_BAT_THERM_400K_PU 0x6a +#define ADC5_BAT_ID_400K_PU 0x6b +#define ADC5_XO_THERM_400K_PU 0x6c +#define ADC5_AMUX_THM1_400K_PU 0x6d +#define ADC5_AMUX_THM2_400K_PU 0x6e +#define ADC5_AMUX_THM3_400K_PU 0x6f +#define ADC5_AMUX_THM4_400K_PU 0x70 +#define ADC5_AMUX_THM5_400K_PU 0x71 +#define ADC5_GPIO1_400K_PU 0x72 +#define ADC5_GPIO2_400K_PU 0x73 +#define ADC5_GPIO3_400K_PU 0x74 +#define ADC5_GPIO4_400K_PU 0x75 +#define ADC5_GPIO5_400K_PU 0x76 +#define ADC5_GPIO6_400K_PU 0x77 +#define ADC5_GPIO7_400K_PU 0x78 +#define ADC5_SBUx_400K_PU 0x79 + +/* 1/3 Divider */ +#define ADC5_GPIO1_DIV3 0x92 +#define ADC5_GPIO2_DIV3 0x93 +#define ADC5_GPIO3_DIV3 0x94 +#define ADC5_GPIO4_DIV3 0x95 +#define ADC5_GPIO5_DIV3 0x96 +#define ADC5_GPIO6_DIV3 0x97 +#define ADC5_GPIO7_DIV3 0x98 +#define ADC5_SBUx_DIV3 0x99 + +/* Current and combined current/voltage channels */ +#define ADC5_INT_EXT_ISENSE 0xa1 +#define ADC5_PARALLEL_ISENSE 0xa5 +#define ADC5_CUR_REPLICA_VDS 0xa7 +#define ADC5_CUR_SENS_BATFET_VDS_OFFSET 0xa9 +#define ADC5_CUR_SENS_REPLICA_VDS_OFFSET 0xab +#define ADC5_EXT_SENS_OFFSET 0xad + +#define ADC5_INT_EXT_ISENSE_VBAT_VDATA 0xb0 +#define ADC5_INT_EXT_ISENSE_VBAT_IDATA 0xb1 +#define ADC5_EXT_ISENSE_VBAT_VDATA 0xb2 +#define ADC5_EXT_ISENSE_VBAT_IDATA 0xb3 +#define ADC5_PARALLEL_ISENSE_VBAT_VDATA 0xb4 +#define ADC5_PARALLEL_ISENSE_VBAT_IDATA 0xb5 + +#define ADC5_MAX_CHANNEL 0xc0 + +/* ADC channels for ADC for PMIC7 */ + +#define ADC7_REF_GND 0x00 +#define ADC7_1P25VREF 0x01 +#define ADC7_VREF_VADC 0x02 +#define ADC7_DIE_TEMP 0x03 + +#define ADC7_AMUX_THM1 0x04 +#define ADC7_AMUX_THM2 0x05 +#define ADC7_AMUX_THM3 0x06 +#define ADC7_AMUX_THM4 0x07 +#define ADC7_AMUX_THM5 0x08 +#define ADC7_AMUX_THM6 0x09 +#define ADC7_GPIO1 0x0a +#define ADC7_GPIO2 0x0b +#define ADC7_GPIO3 0x0c +#define ADC7_GPIO4 0x0d + +#define ADC7_SMB_TEMP 0x06 +#define ADC7_CHG_TEMP 0x10 +#define ADC7_USB_IN_V_16 0x11 +#define ADC7_VDC_16 0x12 +#define ADC7_CC1_ID 0x13 +#define ADC7_VREF_BAT_THERM 0x15 +#define ADC7_IIN_FB 0x17 +#define ADC7_ICHG_SMB 0x18 +#define ADC7_IIN_SMB 0x19 + +/* 30k pull-up1 */ +#define ADC7_AMUX_THM1_30K_PU 0x24 +#define ADC7_AMUX_THM2_30K_PU 0x25 +#define ADC7_AMUX_THM3_30K_PU 0x26 +#define ADC7_AMUX_THM4_30K_PU 0x27 +#define ADC7_AMUX_THM5_30K_PU 0x28 +#define ADC7_AMUX_THM6_30K_PU 0x29 +#define ADC7_GPIO1_30K_PU 0x2a +#define ADC7_GPIO2_30K_PU 0x2b +#define ADC7_GPIO3_30K_PU 0x2c +#define ADC7_GPIO4_30K_PU 0x2d +#define ADC7_CC1_ID_30K_PU 0x33 + +/* 100k pull-up2 */ +#define ADC7_AMUX_THM1_100K_PU 0x44 +#define ADC7_AMUX_THM2_100K_PU 0x45 +#define ADC7_AMUX_THM3_100K_PU 0x46 +#define ADC7_AMUX_THM4_100K_PU 0x47 +#define ADC7_AMUX_THM5_100K_PU 0x48 +#define ADC7_AMUX_THM6_100K_PU 0x49 +#define ADC7_GPIO1_100K_PU 0x4a +#define ADC7_GPIO2_100K_PU 0x4b +#define ADC7_GPIO3_100K_PU 0x4c +#define ADC7_GPIO4_100K_PU 0x4d +#define ADC7_CC1_ID_100K_PU 0x53 + +/* 400k pull-up3 */ +#define ADC7_AMUX_THM1_400K_PU 0x64 +#define ADC7_AMUX_THM2_400K_PU 0x65 +#define ADC7_AMUX_THM3_400K_PU 0x66 +#define ADC7_AMUX_THM4_400K_PU 0x67 +#define ADC7_AMUX_THM5_400K_PU 0x68 +#define ADC7_AMUX_THM6_400K_PU 0x69 +#define ADC7_GPIO1_400K_PU 0x6a +#define ADC7_GPIO2_400K_PU 0x6b +#define ADC7_GPIO3_400K_PU 0x6c +#define ADC7_GPIO4_400K_PU 0x6d +#define ADC7_CC1_ID_400K_PU 0x73 + +/* 1/3 Divider */ +#define ADC7_GPIO1_DIV3 0x8a +#define ADC7_GPIO2_DIV3 0x8b +#define ADC7_GPIO3_DIV3 0x8c +#define ADC7_GPIO4_DIV3 0x8d + +#define ADC7_VPH_PWR 0x8e +#define ADC7_VBAT_SNS 0x8f + +#define ADC7_SBUx 0x94 +#define ADC7_VBAT_2S_MID 0x96 + +#endif /* _DT_BINDINGS_QCOM_SPMI_VADC_H */ diff --git a/include/dt-bindings/interconnect/qcom,osm-l3.h b/include/dt-bindings/interconnect/qcom,osm-l3.h new file mode 100644 index 0000000000..61ef649ae5 --- /dev/null +++ b/include/dt-bindings/interconnect/qcom,osm-l3.h @@ -0,0 +1,15 @@ +/* SPDX-License-Identifier: GPL-2.0 */ +/* + * Copyright (C) 2019 The Linux Foundation. All rights reserved. + */ + +#ifndef __DT_BINDINGS_INTERCONNECT_QCOM_OSM_L3_H +#define __DT_BINDINGS_INTERCONNECT_QCOM_OSM_L3_H + +#define MASTER_OSM_L3_APPS 0 +#define SLAVE_OSM_L3 1 + +#define MASTER_EPSS_L3_APPS 0 +#define SLAVE_EPSS_L3_SHARED 1 + +#endif diff --git a/include/dt-bindings/interconnect/qcom,sm8150.h b/include/dt-bindings/interconnect/qcom,sm8150.h new file mode 100644 index 0000000000..ef292791f5 --- /dev/null +++ b/include/dt-bindings/interconnect/qcom,sm8150.h @@ -0,0 +1,159 @@ +/* SPDX-License-Identifier: GPL-2.0 */ +/* + * Qualcomm SM8150 interconnect IDs + * + * Copyright (c) 2020, The Linux Foundation. All rights reserved. + */ + +#ifndef __DT_BINDINGS_INTERCONNECT_QCOM_SM8150_H +#define __DT_BINDINGS_INTERCONNECT_QCOM_SM8150_H + +#define MASTER_A1NOC_CFG 0 +#define MASTER_QUP_0 1 +#define MASTER_EMAC 2 +#define MASTER_UFS_MEM 3 +#define MASTER_USB3 4 +#define MASTER_USB3_1 5 +#define A1NOC_SNOC_SLV 6 +#define SLAVE_SERVICE_A1NOC 7 + +#define MASTER_A2NOC_CFG 0 +#define MASTER_QDSS_BAM 1 +#define MASTER_QSPI 2 +#define MASTER_QUP_1 3 +#define MASTER_QUP_2 4 +#define MASTER_SENSORS_AHB 5 +#define MASTER_TSIF 6 +#define MASTER_CNOC_A2NOC 7 +#define MASTER_CRYPTO_CORE_0 8 +#define MASTER_IPA 9 +#define MASTER_PCIE 10 +#define MASTER_PCIE_1 11 +#define MASTER_QDSS_ETR 12 +#define MASTER_SDCC_2 13 +#define MASTER_SDCC_4 14 +#define A2NOC_SNOC_SLV 15 +#define SLAVE_ANOC_PCIE_GEM_NOC 16 +#define SLAVE_SERVICE_A2NOC 17 + +#define MASTER_CAMNOC_HF0_UNCOMP 0 +#define MASTER_CAMNOC_HF1_UNCOMP 1 +#define MASTER_CAMNOC_SF_UNCOMP 2 +#define SLAVE_CAMNOC_UNCOMP 3 + +#define MASTER_NPU 0 +#define SLAVE_CDSP_MEM_NOC 1 + +#define MASTER_SPDM 0 +#define SNOC_CNOC_MAS 1 +#define MASTER_QDSS_DAP 2 +#define SLAVE_A1NOC_CFG 3 +#define SLAVE_A2NOC_CFG 4 +#define SLAVE_AHB2PHY_SOUTH 5 +#define SLAVE_AOP 6 +#define SLAVE_AOSS 7 +#define SLAVE_CAMERA_CFG 8 +#define SLAVE_CLK_CTL 9 +#define SLAVE_CDSP_CFG 10 +#define SLAVE_RBCPR_CX_CFG 11 +#define SLAVE_RBCPR_MMCX_CFG 12 +#define SLAVE_RBCPR_MX_CFG 13 +#define SLAVE_CRYPTO_0_CFG 14 +#define SLAVE_CNOC_DDRSS 15 +#define SLAVE_DISPLAY_CFG 16 +#define SLAVE_EMAC_CFG 17 +#define SLAVE_GLM 18 +#define SLAVE_GRAPHICS_3D_CFG 19 +#define SLAVE_IMEM_CFG 20 +#define SLAVE_IPA_CFG 21 +#define SLAVE_CNOC_MNOC_CFG 22 +#define SLAVE_NPU_CFG 23 +#define SLAVE_PCIE_0_CFG 24 +#define SLAVE_PCIE_1_CFG 25 +#define SLAVE_NORTH_PHY_CFG 26 +#define SLAVE_PIMEM_CFG 27 +#define SLAVE_PRNG 28 +#define SLAVE_QDSS_CFG 29 +#define SLAVE_QSPI 30 +#define SLAVE_QUP_2 31 +#define SLAVE_QUP_1 32 +#define SLAVE_QUP_0 33 +#define SLAVE_SDCC_2 34 +#define SLAVE_SDCC_4 35 +#define SLAVE_SNOC_CFG 36 +#define SLAVE_SPDM_WRAPPER 37 +#define SLAVE_SPSS_CFG 38 +#define SLAVE_SSC_CFG 39 +#define SLAVE_TCSR 40 +#define SLAVE_TLMM_EAST 41 +#define SLAVE_TLMM_NORTH 42 +#define SLAVE_TLMM_SOUTH 43 +#define SLAVE_TLMM_WEST 44 +#define SLAVE_TSIF 45 +#define SLAVE_UFS_CARD_CFG 46 +#define SLAVE_UFS_MEM_CFG 47 +#define SLAVE_USB3 48 +#define SLAVE_USB3_1 49 +#define SLAVE_VENUS_CFG 50 +#define SLAVE_VSENSE_CTRL_CFG 51 +#define SLAVE_CNOC_A2NOC 52 +#define SLAVE_SERVICE_CNOC 53 + +#define MASTER_CNOC_DC_NOC 0 +#define SLAVE_LLCC_CFG 1 +#define SLAVE_GEM_NOC_CFG 2 + +#define MASTER_AMPSS_M0 0 +#define MASTER_GPU_TCU 1 +#define MASTER_SYS_TCU 2 +#define MASTER_GEM_NOC_CFG 3 +#define MASTER_COMPUTE_NOC 4 +#define MASTER_GRAPHICS_3D 5 +#define MASTER_MNOC_HF_MEM_NOC 6 +#define MASTER_MNOC_SF_MEM_NOC 7 +#define MASTER_GEM_NOC_PCIE_SNOC 8 +#define MASTER_SNOC_GC_MEM_NOC 9 +#define MASTER_SNOC_SF_MEM_NOC 10 +#define MASTER_ECC 11 +#define SLAVE_MSS_PROC_MS_MPU_CFG 12 +#define SLAVE_ECC 13 +#define SLAVE_GEM_NOC_SNOC 14 +#define SLAVE_LLCC 15 +#define SLAVE_SERVICE_GEM_NOC 16 + +#define MASTER_LLCC 0 +#define SLAVE_EBI_CH0 1 + +#define MASTER_CNOC_MNOC_CFG 0 +#define MASTER_CAMNOC_HF0 1 +#define MASTER_CAMNOC_HF1 2 +#define MASTER_CAMNOC_SF 3 +#define MASTER_MDP_PORT0 4 +#define MASTER_MDP_PORT1 5 +#define MASTER_ROTATOR 6 +#define MASTER_VIDEO_P0 7 +#define MASTER_VIDEO_P1 8 +#define MASTER_VIDEO_PROC 9 +#define SLAVE_MNOC_SF_MEM_NOC 10 +#define SLAVE_MNOC_HF_MEM_NOC 11 +#define SLAVE_SERVICE_MNOC 12 + +#define MASTER_SNOC_CFG 0 +#define A1NOC_SNOC_MAS 1 +#define A2NOC_SNOC_MAS 2 +#define MASTER_GEM_NOC_SNOC 3 +#define MASTER_PIMEM 4 +#define MASTER_GIC 5 +#define SLAVE_APPSS 6 +#define SNOC_CNOC_SLV 7 +#define SLAVE_SNOC_GEM_NOC_GC 8 +#define SLAVE_SNOC_GEM_NOC_SF 9 +#define SLAVE_OCIMEM 10 +#define SLAVE_PIMEM 11 +#define SLAVE_SERVICE_SNOC 12 +#define SLAVE_PCIE_0 13 +#define SLAVE_PCIE_1 14 +#define SLAVE_QDSS_STM 15 +#define SLAVE_TCU 16 + +#endif diff --git a/include/dt-bindings/phy/phy-qcom-qmp.h b/include/dt-bindings/phy/phy-qcom-qmp.h new file mode 100644 index 0000000000..4edec4c5b2 --- /dev/null +++ b/include/dt-bindings/phy/phy-qcom-qmp.h @@ -0,0 +1,20 @@ +/* SPDX-License-Identifier: (GPL-2.0 OR BSD-3-Clause) */ +/* + * Qualcomm QMP PHY constants + * + * Copyright (C) 2022 Linaro Limited + */ + +#ifndef _DT_BINDINGS_PHY_QMP +#define _DT_BINDINGS_PHY_QMP + +/* QMP USB4-USB3-DP clocks */ +#define QMP_USB43DP_USB3_PIPE_CLK 0 +#define QMP_USB43DP_DP_LINK_CLK 1 +#define QMP_USB43DP_DP_VCO_DIV_CLK 2 + +/* QMP USB4-USB3-DP PHYs */ +#define QMP_USB43DP_USB3_PHY 0 +#define QMP_USB43DP_DP_PHY 1 + +#endif /* _DT_BINDINGS_PHY_QMP */ diff --git a/include/dt-bindings/power/qcom-rpmpd.h b/include/dt-bindings/power/qcom-rpmpd.h new file mode 100644 index 0000000000..7f4e2983a4 --- /dev/null +++ b/include/dt-bindings/power/qcom-rpmpd.h @@ -0,0 +1,412 @@ +/* SPDX-License-Identifier: GPL-2.0 */ +/* Copyright (c) 2018, The Linux Foundation. All rights reserved. */ + +#ifndef _DT_BINDINGS_POWER_QCOM_RPMPD_H +#define _DT_BINDINGS_POWER_QCOM_RPMPD_H + +/* SA8775P Power Domain Indexes */ +#define SA8775P_CX 0 +#define SA8775P_CX_AO 1 +#define SA8775P_DDR 2 +#define SA8775P_EBI 3 +#define SA8775P_GFX 4 +#define SA8775P_LCX 5 +#define SA8775P_LMX 6 +#define SA8775P_MMCX 7 +#define SA8775P_MMCX_AO 8 +#define SA8775P_MSS 9 +#define SA8775P_MX 10 +#define SA8775P_MX_AO 11 +#define SA8775P_MXC 12 +#define SA8775P_MXC_AO 13 +#define SA8775P_NSP0 14 +#define SA8775P_NSP1 15 +#define SA8775P_XO 16 + +/* SDM670 Power Domain Indexes */ +#define SDM670_MX 0 +#define SDM670_MX_AO 1 +#define SDM670_CX 2 +#define SDM670_CX_AO 3 +#define SDM670_LMX 4 +#define SDM670_LCX 5 +#define SDM670_GFX 6 +#define SDM670_MSS 7 + +/* SDM845 Power Domain Indexes */ +#define SDM845_EBI 0 +#define SDM845_MX 1 +#define SDM845_MX_AO 2 +#define SDM845_CX 3 +#define SDM845_CX_AO 4 +#define SDM845_LMX 5 +#define SDM845_LCX 6 +#define SDM845_GFX 7 +#define SDM845_MSS 8 + +/* SDX55 Power Domain Indexes */ +#define SDX55_MSS 0 +#define SDX55_MX 1 +#define SDX55_CX 2 + +/* SDX65 Power Domain Indexes */ +#define SDX65_MSS 0 +#define SDX65_MX 1 +#define SDX65_MX_AO 2 +#define SDX65_CX 3 +#define SDX65_CX_AO 4 +#define SDX65_MXC 5 + +/* SM6350 Power Domain Indexes */ +#define SM6350_CX 0 +#define SM6350_GFX 1 +#define SM6350_LCX 2 +#define SM6350_LMX 3 +#define SM6350_MSS 4 +#define SM6350_MX 5 + +/* SM6350 Power Domain Indexes */ +#define SM6375_VDDCX 0 +#define SM6375_VDDCX_AO 1 +#define SM6375_VDDCX_VFL 2 +#define SM6375_VDDMX 3 +#define SM6375_VDDMX_AO 4 +#define SM6375_VDDMX_VFL 5 +#define SM6375_VDDGX 6 +#define SM6375_VDDGX_AO 7 +#define SM6375_VDD_LPI_CX 8 +#define SM6375_VDD_LPI_MX 9 + +/* SM8150 Power Domain Indexes */ +#define SM8150_MSS 0 +#define SM8150_EBI 1 +#define SM8150_LMX 2 +#define SM8150_LCX 3 +#define SM8150_GFX 4 +#define SM8150_MX 5 +#define SM8150_MX_AO 6 +#define SM8150_CX 7 +#define SM8150_CX_AO 8 +#define SM8150_MMCX 9 +#define SM8150_MMCX_AO 10 + +/* SA8155P is a special case, kept for backwards compatibility */ +#define SA8155P_CX SM8150_CX +#define SA8155P_CX_AO SM8150_CX_AO +#define SA8155P_EBI SM8150_EBI +#define SA8155P_GFX SM8150_GFX +#define SA8155P_MSS SM8150_MSS +#define SA8155P_MX SM8150_MX +#define SA8155P_MX_AO SM8150_MX_AO + +/* SM8250 Power Domain Indexes */ +#define SM8250_CX 0 +#define SM8250_CX_AO 1 +#define SM8250_EBI 2 +#define SM8250_GFX 3 +#define SM8250_LCX 4 +#define SM8250_LMX 5 +#define SM8250_MMCX 6 +#define SM8250_MMCX_AO 7 +#define SM8250_MX 8 +#define SM8250_MX_AO 9 + +/* SM8350 Power Domain Indexes */ +#define SM8350_CX 0 +#define SM8350_CX_AO 1 +#define SM8350_EBI 2 +#define SM8350_GFX 3 +#define SM8350_LCX 4 +#define SM8350_LMX 5 +#define SM8350_MMCX 6 +#define SM8350_MMCX_AO 7 +#define SM8350_MX 8 +#define SM8350_MX_AO 9 +#define SM8350_MXC 10 +#define SM8350_MXC_AO 11 +#define SM8350_MSS 12 + +/* SM8450 Power Domain Indexes */ +#define SM8450_CX 0 +#define SM8450_CX_AO 1 +#define SM8450_EBI 2 +#define SM8450_GFX 3 +#define SM8450_LCX 4 +#define SM8450_LMX 5 +#define SM8450_MMCX 6 +#define SM8450_MMCX_AO 7 +#define SM8450_MX 8 +#define SM8450_MX_AO 9 +#define SM8450_MXC 10 +#define SM8450_MXC_AO 11 +#define SM8450_MSS 12 + +/* SM8550 Power Domain Indexes */ +#define SM8550_CX 0 +#define SM8550_CX_AO 1 +#define SM8550_EBI 2 +#define SM8550_GFX 3 +#define SM8550_LCX 4 +#define SM8550_LMX 5 +#define SM8550_MMCX 6 +#define SM8550_MMCX_AO 7 +#define SM8550_MX 8 +#define SM8550_MX_AO 9 +#define SM8550_MXC 10 +#define SM8550_MXC_AO 11 +#define SM8550_MSS 12 +#define SM8550_NSP 13 + +/* QDU1000/QRU1000 Power Domain Indexes */ +#define QDU1000_EBI 0 +#define QDU1000_MSS 1 +#define QDU1000_CX 2 +#define QDU1000_MX 3 + +/* SC7180 Power Domain Indexes */ +#define SC7180_CX 0 +#define SC7180_CX_AO 1 +#define SC7180_GFX 2 +#define SC7180_MX 3 +#define SC7180_MX_AO 4 +#define SC7180_LMX 5 +#define SC7180_LCX 6 +#define SC7180_MSS 7 + +/* SC7280 Power Domain Indexes */ +#define SC7280_CX 0 +#define SC7280_CX_AO 1 +#define SC7280_EBI 2 +#define SC7280_GFX 3 +#define SC7280_MX 4 +#define SC7280_MX_AO 5 +#define SC7280_LMX 6 +#define SC7280_LCX 7 +#define SC7280_MSS 8 + +/* SC8180X Power Domain Indexes */ +#define SC8180X_CX 0 +#define SC8180X_CX_AO 1 +#define SC8180X_EBI 2 +#define SC8180X_GFX 3 +#define SC8180X_LCX 4 +#define SC8180X_LMX 5 +#define SC8180X_MMCX 6 +#define SC8180X_MMCX_AO 7 +#define SC8180X_MSS 8 +#define SC8180X_MX 9 +#define SC8180X_MX_AO 10 + +/* SC8280XP Power Domain Indexes */ +#define SC8280XP_CX 0 +#define SC8280XP_CX_AO 1 +#define SC8280XP_DDR 2 +#define SC8280XP_EBI 3 +#define SC8280XP_GFX 4 +#define SC8280XP_LCX 5 +#define SC8280XP_LMX 6 +#define SC8280XP_MMCX 7 +#define SC8280XP_MMCX_AO 8 +#define SC8280XP_MSS 9 +#define SC8280XP_MX 10 +#define SC8280XP_MXC 12 +#define SC8280XP_MX_AO 11 +#define SC8280XP_NSP 13 +#define SC8280XP_QPHY 14 +#define SC8280XP_XO 15 + +/* SDM845 Power Domain performance levels */ +#define RPMH_REGULATOR_LEVEL_RETENTION 16 +#define RPMH_REGULATOR_LEVEL_MIN_SVS 48 +#define RPMH_REGULATOR_LEVEL_LOW_SVS_D2 52 +#define RPMH_REGULATOR_LEVEL_LOW_SVS_D1 56 +#define RPMH_REGULATOR_LEVEL_LOW_SVS_D0 60 +#define RPMH_REGULATOR_LEVEL_LOW_SVS 64 +#define RPMH_REGULATOR_LEVEL_LOW_SVS_P1 72 +#define RPMH_REGULATOR_LEVEL_LOW_SVS_L1 80 +#define RPMH_REGULATOR_LEVEL_LOW_SVS_L2 96 +#define RPMH_REGULATOR_LEVEL_SVS 128 +#define RPMH_REGULATOR_LEVEL_SVS_L0 144 +#define RPMH_REGULATOR_LEVEL_SVS_L1 192 +#define RPMH_REGULATOR_LEVEL_SVS_L2 224 +#define RPMH_REGULATOR_LEVEL_NOM 256 +#define RPMH_REGULATOR_LEVEL_NOM_L0 288 +#define RPMH_REGULATOR_LEVEL_NOM_L1 320 +#define RPMH_REGULATOR_LEVEL_NOM_L2 336 +#define RPMH_REGULATOR_LEVEL_TURBO 384 +#define RPMH_REGULATOR_LEVEL_TURBO_L0 400 +#define RPMH_REGULATOR_LEVEL_TURBO_L1 416 +#define RPMH_REGULATOR_LEVEL_TURBO_L2 432 +#define RPMH_REGULATOR_LEVEL_TURBO_L3 448 +#define RPMH_REGULATOR_LEVEL_SUPER_TURBO 464 +#define RPMH_REGULATOR_LEVEL_SUPER_TURBO_NO_CPR 480 + +/* MDM9607 Power Domains */ +#define MDM9607_VDDCX 0 +#define MDM9607_VDDCX_AO 1 +#define MDM9607_VDDCX_VFL 2 +#define MDM9607_VDDMX 3 +#define MDM9607_VDDMX_AO 4 +#define MDM9607_VDDMX_VFL 5 + +/* MSM8226 Power Domain Indexes */ +#define MSM8226_VDDCX 0 +#define MSM8226_VDDCX_AO 1 +#define MSM8226_VDDCX_VFC 2 + +/* MSM8939 Power Domains */ +#define MSM8939_VDDMDCX 0 +#define MSM8939_VDDMDCX_AO 1 +#define MSM8939_VDDMDCX_VFC 2 +#define MSM8939_VDDCX 3 +#define MSM8939_VDDCX_AO 4 +#define MSM8939_VDDCX_VFC 5 +#define MSM8939_VDDMX 6 +#define MSM8939_VDDMX_AO 7 + +/* MSM8916 Power Domain Indexes */ +#define MSM8916_VDDCX 0 +#define MSM8916_VDDCX_AO 1 +#define MSM8916_VDDCX_VFC 2 +#define MSM8916_VDDMX 3 +#define MSM8916_VDDMX_AO 4 + +/* MSM8909 Power Domain Indexes */ +#define MSM8909_VDDCX MSM8916_VDDCX +#define MSM8909_VDDCX_AO MSM8916_VDDCX_AO +#define MSM8909_VDDCX_VFC MSM8916_VDDCX_VFC +#define MSM8909_VDDMX MSM8916_VDDMX +#define MSM8909_VDDMX_AO MSM8916_VDDMX_AO + +/* MSM8917 Power Domain Indexes */ +#define MSM8917_VDDCX 0 +#define MSM8917_VDDCX_AO 1 +#define MSM8917_VDDCX_VFL 2 +#define MSM8917_VDDMX 3 +#define MSM8917_VDDMX_AO 4 + +/* MSM8937 Power Domain Indexes */ +#define MSM8937_VDDCX MSM8917_VDDCX +#define MSM8937_VDDCX_AO MSM8917_VDDCX_AO +#define MSM8937_VDDCX_VFL MSM8917_VDDCX_VFL +#define MSM8937_VDDMX MSM8917_VDDMX +#define MSM8937_VDDMX_AO MSM8917_VDDMX_AO + +/* QM215 Power Domain Indexes */ +#define QM215_VDDCX MSM8917_VDDCX +#define QM215_VDDCX_AO MSM8917_VDDCX_AO +#define QM215_VDDCX_VFL MSM8917_VDDCX_VFL +#define QM215_VDDMX MSM8917_VDDMX +#define QM215_VDDMX_AO MSM8917_VDDMX_AO + +/* MSM8953 Power Domain Indexes */ +#define MSM8953_VDDMD 0 +#define MSM8953_VDDMD_AO 1 +#define MSM8953_VDDCX 2 +#define MSM8953_VDDCX_AO 3 +#define MSM8953_VDDCX_VFL 4 +#define MSM8953_VDDMX 5 +#define MSM8953_VDDMX_AO 6 + +/* MSM8976 Power Domain Indexes */ +#define MSM8976_VDDCX 0 +#define MSM8976_VDDCX_AO 1 +#define MSM8976_VDDCX_VFL 2 +#define MSM8976_VDDMX 3 +#define MSM8976_VDDMX_AO 4 +#define MSM8976_VDDMX_VFL 5 + +/* MSM8994 Power Domain Indexes */ +#define MSM8994_VDDCX 0 +#define MSM8994_VDDCX_AO 1 +#define MSM8994_VDDCX_VFC 2 +#define MSM8994_VDDMX 3 +#define MSM8994_VDDMX_AO 4 +#define MSM8994_VDDGFX 5 +#define MSM8994_VDDGFX_VFC 6 + +/* MSM8996 Power Domain Indexes */ +#define MSM8996_VDDCX 0 +#define MSM8996_VDDCX_AO 1 +#define MSM8996_VDDCX_VFC 2 +#define MSM8996_VDDMX 3 +#define MSM8996_VDDMX_AO 4 +#define MSM8996_VDDSSCX 5 +#define MSM8996_VDDSSCX_VFC 6 + +/* MSM8998 Power Domain Indexes */ +#define MSM8998_VDDCX 0 +#define MSM8998_VDDCX_AO 1 +#define MSM8998_VDDCX_VFL 2 +#define MSM8998_VDDMX 3 +#define MSM8998_VDDMX_AO 4 +#define MSM8998_VDDMX_VFL 5 +#define MSM8998_SSCCX 6 +#define MSM8998_SSCCX_VFL 7 +#define MSM8998_SSCMX 8 +#define MSM8998_SSCMX_VFL 9 + +/* QCS404 Power Domains */ +#define QCS404_VDDMX 0 +#define QCS404_VDDMX_AO 1 +#define QCS404_VDDMX_VFL 2 +#define QCS404_LPICX 3 +#define QCS404_LPICX_VFL 4 +#define QCS404_LPIMX 5 +#define QCS404_LPIMX_VFL 6 + +/* SDM660 Power Domains */ +#define SDM660_VDDCX 0 +#define SDM660_VDDCX_AO 1 +#define SDM660_VDDCX_VFL 2 +#define SDM660_VDDMX 3 +#define SDM660_VDDMX_AO 4 +#define SDM660_VDDMX_VFL 5 +#define SDM660_SSCCX 6 +#define SDM660_SSCCX_VFL 7 +#define SDM660_SSCMX 8 +#define SDM660_SSCMX_VFL 9 + +/* SM6115 Power Domains */ +#define SM6115_VDDCX 0 +#define SM6115_VDDCX_AO 1 +#define SM6115_VDDCX_VFL 2 +#define SM6115_VDDMX 3 +#define SM6115_VDDMX_AO 4 +#define SM6115_VDDMX_VFL 5 +#define SM6115_VDD_LPI_CX 6 +#define SM6115_VDD_LPI_MX 7 + +/* SM6125 Power Domains */ +#define SM6125_VDDCX 0 +#define SM6125_VDDCX_AO 1 +#define SM6125_VDDCX_VFL 2 +#define SM6125_VDDMX 3 +#define SM6125_VDDMX_AO 4 +#define SM6125_VDDMX_VFL 5 + +/* QCM2290 Power Domains */ +#define QCM2290_VDDCX 0 +#define QCM2290_VDDCX_AO 1 +#define QCM2290_VDDCX_VFL 2 +#define QCM2290_VDDMX 3 +#define QCM2290_VDDMX_AO 4 +#define QCM2290_VDDMX_VFL 5 +#define QCM2290_VDD_LPI_CX 6 +#define QCM2290_VDD_LPI_MX 7 + +/* RPM SMD Power Domain performance levels */ +#define RPM_SMD_LEVEL_RETENTION 16 +#define RPM_SMD_LEVEL_RETENTION_PLUS 32 +#define RPM_SMD_LEVEL_MIN_SVS 48 +#define RPM_SMD_LEVEL_LOW_SVS 64 +#define RPM_SMD_LEVEL_SVS 128 +#define RPM_SMD_LEVEL_SVS_PLUS 192 +#define RPM_SMD_LEVEL_NOM 256 +#define RPM_SMD_LEVEL_NOM_PLUS 320 +#define RPM_SMD_LEVEL_TURBO 384 +#define RPM_SMD_LEVEL_TURBO_NO_CPR 416 +#define RPM_SMD_LEVEL_TURBO_HIGH 448 +#define RPM_SMD_LEVEL_BINNING 512 + +#endif diff --git a/include/dt-bindings/regulator/qcom,rpmh-regulator.h b/include/dt-bindings/regulator/qcom,rpmh-regulator.h new file mode 100644 index 0000000000..86713dcf9e --- /dev/null +++ b/include/dt-bindings/regulator/qcom,rpmh-regulator.h @@ -0,0 +1,36 @@ +/* SPDX-License-Identifier: GPL-2.0 */ +/* Copyright (c) 2018, The Linux Foundation. All rights reserved. */ + +#ifndef __QCOM_RPMH_REGULATOR_H +#define __QCOM_RPMH_REGULATOR_H + +/* + * These mode constants may be used to specify modes for various RPMh regulator + * device tree properties (e.g. regulator-initial-mode). Each type of regulator + * supports a subset of the possible modes. + * + * %RPMH_REGULATOR_MODE_RET: Retention mode in which only an extremely small + * load current is allowed. This mode is supported + * by LDO and SMPS type regulators. + * %RPMH_REGULATOR_MODE_LPM: Low power mode in which a small load current is + * allowed. This mode corresponds to PFM for SMPS + * and BOB type regulators. This mode is supported + * by LDO, HFSMPS, BOB, and PMIC4 FTSMPS type + * regulators. + * %RPMH_REGULATOR_MODE_AUTO: Auto mode in which the regulator hardware + * automatically switches between LPM and HPM based + * upon the real-time load current. This mode is + * supported by HFSMPS, BOB, and PMIC4 FTSMPS type + * regulators. + * %RPMH_REGULATOR_MODE_HPM: High power mode in which the full rated current + * of the regulator is allowed. This mode + * corresponds to PWM for SMPS and BOB type + * regulators. This mode is supported by all types + * of regulators. + */ +#define RPMH_REGULATOR_MODE_RET 0 +#define RPMH_REGULATOR_MODE_LPM 1 +#define RPMH_REGULATOR_MODE_AUTO 2 +#define RPMH_REGULATOR_MODE_HPM 3 + +#endif diff --git a/include/dt-bindings/soc/qcom,rpmh-rsc.h b/include/dt-bindings/soc/qcom,rpmh-rsc.h new file mode 100644 index 0000000000..868f998ea9 --- /dev/null +++ b/include/dt-bindings/soc/qcom,rpmh-rsc.h @@ -0,0 +1,14 @@ +/* SPDX-License-Identifier: GPL-2.0 */ +/* + * Copyright (c) 2016-2018, The Linux Foundation. All rights reserved. + */ + +#ifndef __DT_QCOM_RPMH_RSC_H__ +#define __DT_QCOM_RPMH_RSC_H__ + +#define SLEEP_TCS 0 +#define WAKE_TCS 1 +#define ACTIVE_TCS 2 +#define CONTROL_TCS 3 + +#endif /* __DT_QCOM_RPMH_RSC_H__ */